View Full Version : m600i Support
Gorillablueme
02-20-2007, 10:50
Hello Kulankendi,
First of all, great piece of Software! Since it supports P990 will this support the m600i as well? I have an unbranded developer Phone but I'm not able to update it with the normal SEUS server. Would be really really cool if your solution could work for me.
Thanks a mil
Gorilla
sockpuppetuk
02-20-2007, 11:22
I also have the same phone and would like support for the M600i as mine cannot be updated either.
When i connect it to the log prog it is recognised as a P990i (I presume because of the operating system) so just wondering if it will work anyway.
KulanKendi
02-20-2007, 18:22
if it's detected as P990 then it mean same CPU, can U paste me information what read KKClient?
b.r.
I also have the same phone and would like support for the M600i as mine cannot be updated either.
When i connect it to the log prog it is recognised as a P990i (I presume because of the operating system) so just wondering if it will work anyway.
sockpuppetuk
02-20-2007, 21:24
I have 2 prototypes.
Number one which is unbranded :
Hold 'C' button and plug DCU60 USB cable.
Phone Connected...
Detected: DB2000: P990i Series
Connecting to server...
Phone IMEI:******
Color: Brown ; OTP CID: 49
EROM CID:49
Phone Model:M600i
CDA: CDA162011/1 R3A03
PDA: CXC162037 R3A002
Bluetooth Firmware: CXC162071 R3A03
Phone Firmware: CXC162098 R1A12
Flash ID: 0x8964 - Supported
Error: GDFS Blk: 6
The second one which is Voda branded :
Hold 'C' button and plug DCU60 USB cable.
Phone Connected...
Error: Bypass!> REQ.
Both are unlocked.
KulanKendi
02-20-2007, 23:01
what U mean prototypes ?
try second phone communicate again.
so it looks like problem with read gdfs blocks.
If I'll get M600i then I'll try to update for sure :)
b.r.
I have 2 prototypes.
Number one which is unbranded :
Hold 'C' button and plug DCU60 USB cable.
Phone Connected...
Detected: DB2000: P990i Series
Connecting to server...
Phone IMEI:******
Color: Brown ; OTP CID: 49
EROM CID:49
Phone Model:M600i
CDA: CDA162011/1 R3A03
PDA: CXC162037 R3A002
Bluetooth Firmware: CXC162071 R3A03
Phone Firmware: CXC162098 R1A12
Flash ID: 0x8964 - Supported
Error: GDFS Blk: 6
The second one which is Voda branded :
Hold 'C' button and plug DCU60 USB cable.
Phone Connected...
Error: Bypass!> REQ.
Both are unlocked.
Gorillablueme
02-22-2007, 11:23
Hey there if you want to, I could send you my phone for testing, let me know.
Cheers Gorilla
@Gorillablueme
check PM please
B R
daniel996
02-26-2007, 13:38
Hi,
I also have a Vodafone branded M600i and I get this same error:
Hold 'C' button and plug DCU60 USB cable.
Phone Connected...
Error: Bypass!> REQ.
Dan
Goldfingiz
02-26-2007, 14:34
Hi,
I also have a Vodafone branded M600i and I get this same error:
Hold 'C' button and plug DCU60 USB cable.
Phone Connected...
Error: Bypass!> REQ.
Dan
Try holding the @ key on the side of the phone instead of C when you connect it to USB.
daniel996
02-26-2007, 14:36
Hi,
I also have a Vodafone branded M600i and I get this same error:
Hold 'C' button and plug DCU60 USB cable.
Phone Connected...
Error: Bypass!> REQ.
Dan
Never mind, all fixed!
See this thread here (http://forum.gsmhosting.com/vbb/showthread.php?t=378412&page=2) ie use the "@" or internet button instead of the Back or C button!
Generic World 1 firmware now updating, 42% and counting!
Cheers
Dan
Goldfingiz
02-26-2007, 14:44
Never mind, all fixed!
See this thread here (http://forum.gsmhosting.com/vbb/showthread.php?t=378412&page=2) ie use the "@" or internet button instead of the Back or C button!
Generic World 1 firmware now updating, 42% and counting!
Cheers
Dan
Congrats Dan. Can't wait for my l/p to arrive. I'm checking my email non-stop, lol.