View Full Version : SL75 with AMD flash
paullovinicius
02-20-2007, 19:55
I already sent a PM for support, but doens't work the REPAIR SECURITY for DreamBox "unlock dead" SL75.
You will get again "Write #06" error.
The flash process only starts before you untick
* Options -> Siemens -> Repair IMEI after flashing EEFULL or EELITE are (use OTP IMEI)
* Options -> Siemens -> Repair setup table after flashing firmware area
Flash occours normal, but when you try to repair IMEI again the "Write #06" error.
DreamSupporter, when will we wake up from this nightmare? :eek:
Thanks in advance!
paullovinicius
02-22-2007, 20:56
Hi! It's time to fix your dead SL75 flash ID AMD! :)
If you tried to unlock an SL75 and received this error:
Error : Write #06
Error : Failed.
And your flash info are:
Flash Chip = AMD S29WS256N, size 32768 Kb
Flash Chip = AMD S29GL512N, size 65536 Kb
Make all the steps and you will get your phone live again.
1 - Install DBSS 2.4 and upgrade the box firmware.
2 - Download the fullflash "SL75_lg3_v10_fullflash.dtf" from www.boot-loader.com
3 - In DBSS 2.4, Tools -> Options -> Siemens and tick:
Repair Security Data after flashing EEFULL or EELITE area
Repair setup table after flashing firmware area
4 - Now select model "Siemens SL75" and the access mode:
4a - If you have keys, use IMEI Access Mode.
4b - If you don't have keys, use Format Bootcore Access Mode.
4c - If the bootcore is damaged, use TestPoint Access Mode.
5 - Go to "Scenario" tab and select the "SL75_lg3_v10_fullflash.dtf" and check "Write Full Flash"
6 - Select "Manual Restart" and click "Run Scenario"
7 - It will take 12~15 mins, when it ask about the other phone, cancel, remove data cable and the battery, wait 5 secs, insert the cable and the battery
8 - Uncheck "Write Full Flash" and check "Generate Randon Skey" and "Repair Security(use factory IMEI from OTP area") - EDIT:You can use "Normal Access Mode" now.
9 - Again will take 12 ~15 mins, but it's ok, it's repairing process.
OK, remove and insert again the battery and now your phone is working good, but if you need change the language pack do it in "Scenario" tab checking only "Write Firmware" and "Write Language". Try to use a v10 firmware or the original version of your phone.
I used a new test point discovered by gehstock/BouRRi_GSM and works very good with DreamBox too! Don't need to use the DreamBox TP needle, use a common needle to that point to GND.
EDIT: Use it in your own risk. See in next post what DreamSupporter says about this TP.
Thanks DreamSupporter, gehstock and BouRRI_GSM!
DreamSupporter
02-23-2007, 13:02
We don't recommend to use this TP, because it can be dangerous for your phone!
@ paullovinicius, moaster and their friends
Thank you very much for help in testing SL75 with AMD flash!
paulo_mineiro
02-28-2007, 22:35
Didn´t work... error #06 on step 8.
tried on step 8 "Write EEPROM" and it goes to end but phone still doesn´t power on.
flash used sl75_1003[1].fullflash.dtf 06-28-2006 14:12 from bootloader
paullovinicius
03-01-2007, 18:47
Alternative STEP 8:
8 - Uncheck "Write Full Flash" and check "Write EEPROM", "Generate Randon Skey" and "Repair Security"(use factory IMEI from OTP area").
paulo_mineiro, try to do it or go to EIL forum :-)
Portuguese Procedure is posted there :D
Yes, Many times tested. It works!
b.r.
Cryspim
BouRRi_GSM
03-01-2007, 21:39
with This TP risk is 0
repair/unlock more than 30 SL75 or dead SL75 with this TP, worked phone never dead, dead phone will alive
many memeber have tested this TP 2 month ago and can confirm phone never dead with this TP
so where is the risk??
sorry i'm in wrong section
:)
paulo_mineiro
03-01-2007, 23:11
@paullovinicius
Maybe my fullflash is old, I am trying to download a new from bootloader but it is impossible...
@BouRRi_GSM
I think:
this process must be done quickly.
like x65 TP if you conect for a long time will damage the phone.
This is a simple and rapid solution.
@DreamSupporter
Please, correct me.
DreamSupporter
03-02-2007, 12:10
@paullovinicius
Maybe my fullflash is old, I am trying to download a new from bootloader but it is impossible...
Why is it impossible??
paulo_mineiro
03-02-2007, 15:41
@DreamSupporter
now my SL75 is alive with SL75_lg91_v39_fullflash.dtf
others FW versions didnīt works
if I update only lang from sl75_390100.update.firmware.dtf kill my phone
can you help me?
DreamSupporter
03-02-2007, 15:51
For now we recommend you to use scenario in DBSS for SL75:
- Open the file Sl75_390100.update.firmware.dtf
- Select only Write language
- Run Scenario
and all will be OK ;).
paullovinicius
03-02-2007, 20:20
now my SL75 is alive with SL75_lg91_v39_fullflash.dtf
paulo_mineiro, where i can found this fullflash?
i only found "SL75_lg3_v10_fullflash.dtf" in boot-loader.com
DreamSupporter, can I use a backup from a working SL75/AMD phone instead use the SL75_lg3_v10_fullflash.dtf ?
My phone doesn't shutdown(freeze in last "Siemens" black screen...)
Thanks!
DreamSupporter
03-04-2007, 17:55
DreamSupporter, can I use a backup from a working SL75/AMD phone instead use the SL75_lg3_v10_fullflash.dtf ?
My phone doesn't shutdown(freeze in last "Siemens" black screen...)
Thanks!
Of course, you can! ;)
paulo_mineiro
03-05-2007, 14:37
A full backup from a good phone didnīt work.
SL75_lg91_v39_fullflash.dtf with Lang from a good phone fullbackup didnīt work.
SL75_lg91_v39_fullflash.dtf with Lang from sl75_390100.update.firmware.dtf downloaded from bootloader alive my phone with some bugs.
Freeze some menus,mixed lang (portuguese and russian) and some funcions of the phone become to slowly.Shutdown takes more than one minute.
My old fullflash downloaded from Bootloader isnīt the same I got now.
(old sl75_1003[1].fullflash.dtf 23.294kb and new SL75_lg3_v10_fullflash.dtf 23.410kb)
paullovinicius
03-06-2007, 00:18
paulo_mineiro, are there any differences using the old and new v10 fullflash?
talking with gehstock, he said me that the freeze at shutdown is caused by use a non original from my phone eeprom and/or FFS. he have same problem with EL71 and all new-sgold....
DreamSupporter, we need help again to solve the "unshutdownable"(bad word :) ), mixed languages and buggy SL75, ok?
We are waiting!
paullovinicius
03-13-2007, 15:03
The problem is finally solved!
Thanks DreamSupporter by the tip!
If your phone is not shutdown'g(hang in last screen), if it crash sometimes try to do it! It solved my problem and my phone is 100% now!
You will need:
Winsup 4.18 from http://s75.siemens-club.org/s75soft.html - directlink http://s75.siemens-club.org/files/soft/winswup418.rar
SL75_2_ua-retail_35_0330.xfs from http://allsiemens.com/flash/xfs/SL75-sl75_sw35_xfs.zip.htm
Any V35 firmware from boot-loader.com (I used sl75_350100.update.firmware.dtf)
Let's go!
First make the recover procedure if your phone is not working or if it not in a < V35 version.
Then go to scenario tab, select the V35 Firmware file, select firmware and language. "Do jobs".
Try if your phone is working.
Open the Winsup 4.18, File -> Open. In type of files, select XFS and select the file SL75_2_ua-retail_35_0330.xfs. Disable Pre and Post check.
Configure your port settings in "Serial Config".
Now click in Start and, with the phone powered off, press once one the Power button.
Wait for procedure finish...
Ready!
Now we will wait for DBSS solution to flash this XFS file...
Thanks DreamSupporter!
We don't recommend to use this TP, because it can be dangerous for your phone!
@ paullovinicius, moaster and their friends
Thank you very much for help in testing SL75 with AMD flash!
Thank you DreamSupporter for the patience with us!!:)
Best Regards