8800 Chinese rus?

[dikey]

COM9 selected
Device: Autodetect
Checking data, wait...
Action: Read information
Boot...
Press and HOLD Power button now !
baud autodetection active
19200
Connecting, wait...
Initializing[6219:8B02]...
Release Power button now !
Boot Done
Initialize...
detecting chip[00] in region[00]...
flash: 01227E22212200
flash: 29EA0000000000
flash: AMD/Fujitsu std [0004x010000 003Ex040000 0004x010000] 16Mb
total number of flash chip detected: 01
Initialize Done
Set baud...
slowest
Set baud Done
Check space...
operation mode: Fast detection mode
device parameters autodetection in progress..
detecting chip[00] in region[00]...
flash: 01227E22212200
flash: 29EA0000000000
flash: AMD/Fujitsu std [0004x010000 003Ex040000 0004x010000] 16Mb
total number of flash chip detected: 01
total flash region size: 01000000
detecting eeprom area in 1 chip(s)...
flash: 01227E22212200
flash: 29EA0000000000
checking area[00000000]: 00000000-00FFFFFF...
eeprom found near: 00E00000
detecting eeprom size...
eeprom size: 00200000
eeprom chip: 00
eeprom area detected[00000000]: 00E00000-00FFFFFF
detecting firmware version...
.................................................. ..............
firmware version: v04MIKI26_05C_PCB01_GPRS_MT6226M_S01.V61_18.BIN
detecting languages...
.....................................
language parameters detected
can't detect language names
if software not respond/freez/failed now, make "Detect language names (slow process)" unchecked and repeat operation.
Finished, time used: 92 sec
Remove/Install battery now !

russ lang ? which file to use ?

[InfinitySupport]

It's very hard, even impossible to give answer for this question due to many different chinese phones exist with the same hardware and different names or the same names and different hardware.
You can try to write different firmware from support area and see results.