View Full Version : >>Cannot use Infinity Box<<
Hi Guys,
I am very new to this BOX...ive followed every step in the manual to setup the Infinity Plus Box to my pc but still it dosnt work.
the manual mentions about a dongle to read the serial number n stuff but i didnt get a dongle with this box...do i have to get one?? where can i get it??
i am providing you guys the error message below:
------------------------------------------------
Dongle can't be found
Error when establishing contest !
Smart card API error #8010001D
The Smart card resource manager is not running
------------------------------------------------
thanx in advance:confused:
Dongle can't be found
This indicates that u havent installed ur Box properly.
Read the instructions again and install.
B.R.,
Viru
InfinitySupport
03-01-2007, 21:14
Please, follow installation manual and see your problems description/solution here:
http://forum.gsmhosting.com/vbb/showthread.php?t=342807
this problem was described already so I hope you can read "FAQ" and solve problem in 1 minute.
Also, it's good idea always read "FAQ" before ask questions. I have spend A LOT of time and prepared "FAQ" thread especially for people who have the same problems due to their PC faults, cable problems etc.
thanx man..i will read the FAQ n try again
InfinitySupport
03-02-2007, 09:05
Ok, hope FAQ helps you w/o big lost of time in reading.
Yes, I know, reading is very hard for many people, so I post here exact link from FAQ thread:
http://forum.gsmhosting.com/vbb/showpost.php?p=2049163&postcount=2
Installation/driver problem "smart card resource manager is not running":
http://forum.gsmhosting.com/vbb/showthread.php?t=272901
Hi,
I have fixed the "smart card resource manager is not running": error thanx to the support
but now another prob has comeup,..why is this box so diffcult to setup...my system cannot find the dongle.
i have installed the drivers as mentioned in the manual..but my system only shows:
e-gate Virtual Reader Enumerator->e-gate Virtual Reader Enumerator
dosnt show:
Smart Card reader-> e-gate USB Smart card reader
e-gate USB Smart Cards-> e-gate USB Smart Card
what seems to b the problem...i got the box jus 2 days back but still i am havin difficulty in setting it up for a working conditions
thanx in advance
InfinitySupport
03-04-2007, 10:36
Hello,
Please, follow installation steps exactly like described in manual.
Also, if it was "smart card resource manager is not running" before it can be that some things was changed/deleted on your PC, probably your PC little bit faulty.
Also it's good idea to try other USB slot on your PC.
i will and will let you know...i think theres a prob with the boc
my pc is not faulty
Config:
---------------------------
PIV 3.20GHz hyper threading
512 DDR RAM
300GB HDD
i fixed it...there was a prob wit the smart card..i cleaned it n fixed it again ..now works fine