View Full Version : Pantech G500
i got here one pantech G500 for unlock. i hope Infinity Team will suppport this model...
thanks
..::AppleLinks::..
12-28-2007, 08:27
here i try with selecting G800 but nothing...
COM1 [Serial0] selected
Device: Pantech G800
Checking data, wait...
advanced flash detection active
Action: analyze
Boot...
Phone must be POWERED-OFF !
Cable must be in "GPRS" mode !
Press and HOLD Power button !
Connecting, wait...
Release Power button !
flash: 01227E22022201:0CE59F00000000
flash: 01227E22022201:0CE59F00000000
flash: Amd PL064J D 8Mb
id: 00005260
Boot Done
Set baud...
115200
Set baud Done
Check flash...
error: no any expected answer
error: no any expected answer: wrong answer after chip id request
error: no any expected answer: wrong answer after chip id request
error: no any expected answer
error: no any expected answer
error: no any expected answer
error: no any expected answer
error: no any expected answer
file saved: backup_Pantech G800_analyze_20071228-122456.8FX.bin
Please, send "backup_Pantech G800_analyze.bin" file to support !
error: no any expected answer
Finished, time used: 34 sec
Remove/Install battery now !
InfinitySupport
12-28-2007, 11:38
@..::AppleLinks::..
did you tried to make "unlock" procedure ?
..::AppleLinks::..
12-29-2007, 07:58
@..::AppleLinks::..
did you tried to make "unlock" procedure ?
yes i did all tries but nothing with other selecting products..i think it hvae different CPu or flash chip...any idea?????
InfinitySupport
12-29-2007, 08:10
Did you tried to make unlock like other models with "DATA mode" cable ?
dog_baby
04-08-2008, 10:04
I have same prob with Mr AppleLinks
Log here :
COM2 ready
Testing COM2 at 230400...
COM2 [VCP0] selected
Device: Pantech G800
Checking data, wait...
advanced flash detection active
Action: read flash
Boot...
Phone must be POWERED-OFF !
Cable must be in "GPRS" mode !
Press and HOLD Power button !
Connecting, wait...
Release Power button !
flash: 01227E22022201:0CE59F00000000
flash: 01227E22022201:0CE59F00000000
flash: Amd PL064J D 8Mb
id: 00005260
Boot Done
Set baud...
230400
Set baud Done
Check flash...
Reading[part_1_of_2__Pantech G800]...
error: no any expected answer
Reading[part_2_of_2__Pantech G800]...
error: no any expected answer
error: no any expected answer
error: no any expected answer: wrong answer after chip id request
error: no any expected answer: wrong answer after chip id request
error: no any expected answer
error: no any expected answer: wrong answer after chip id request
error: no any expected answer: wrong answer after chip id request
error: no any expected answer
Finished, time used: 90 sec
Remove/Install battery now !
Trying with "DATA mode" cable With Pinout from G800 not work
Log here :
Application: C:\Program Files\InfinityBox\PNModule\PNModule.exe
Loading data, wait...
[Infinity Box] v1.05
S/N: 0D05:010E
Wait...
Current device: Pantech G800
Done
Action: unlock
COM2 [VCP0] selected
Phone must be POWERED-ON !
Cable must be in "DATA" mode !
Connecting, wait...
error: connection failed, try again !
error: operation not finished properly
Finished, time used: 34 sec
Power-off phone by "Power" button (don't remove battery).
Action: unlock
COM2 [VCP0] selected
Phone must be POWERED-ON !
Cable must be in "DATA" mode !
Connecting, wait...
error: connection failed, try again !
error: operation not finished properly
Finished, time used: 34 sec
Power-off phone by "Power" button (don't remove battery).
Action: unlock
COM2 [VCP0] selected
Phone must be POWERED-ON !
Cable must be in "DATA" mode !
Connecting, wait...
error: connection failed, try again !
error: operation not finished properly
Finished, time used: 33 sec
Power-off phone by "Power" button (don't remove battery).
Action: unlock
COM2 [VCP0] selected
Phone must be POWERED-ON !
Cable must be in "DATA" mode !
Connecting, wait...
error: connection failed, try again !
error: operation not finished properly
Finished, time used: 33 sec
Power-off phone by "Power" button (don't remove battery).
anyone have solution in this Case?
Pls help!
InfinitySupport
04-08-2008, 12:12
@dog_baby
What is "the same" problem ?
dog_baby
04-12-2008, 04:10
i want unlock Pantech G500 with selected G800 model from infi support but Not work :-)(infi not support G500)
Backup error, unlock with DATA Mode not work(HW in two phone very same)
sorry for log if lost your time
Thanks.
..::AppleLinks::..
04-12-2008, 08:37
@Infinity Team
This Phone have some different cpu inside...so get the phoen and add it also.....
InfinitySupport
04-12-2008, 11:21
@dog_baby
Double check "DATA" mode cable ("DATA" mode cable is not the same as cable for flashing !) and try again. You can try to select other model, phone can't be damaged in "DATA" mode.
@..::AppleLinks::..
1. What you talk about ?
2. Do you have phone on hands ?
3. Did you tested it ?
Please, post here answers to all these questions so we can understand what you talk about
..::AppleLinks::..
04-14-2008, 13:06
@dog_baby
Double check "DATA" mode cable ("DATA" mode cable is not the same as cable for flashing !) and try again. You can try to select other model, phone can't be damaged in "DATA" mode.
@..::AppleLinks::..
1. What you talk about ?
2. Do you have phone on hands ?
3. Did you tested it ?
Please, post here answers to all these questions so we can understand what you talk about
1-i talk about different cpu inside phone,purchase phone experiment on it,and present the solotion for us.u r 1st ans
1-if u can see above posts,some days ago i post about it...........so it mean soem days ago i check it..this is u 2nd ans
3-ye si chck the phone,this is u r 3rd ans
@InfinitySupport
plz do not force user to select different phone model,get the phone and add it also.....no need to present ideas more..thats all
InfinitySupport
04-14-2008, 15:59
plz do not force user to select different phone model,get the phone and add it also.....no need to present ideas more..thats all
Please, no need to give me adivces like this due to simple reason: I have really huge knowledge in compare with many other people (and for sure you are in this list too), so, please, next time whn you will try to give me some advices try to think what you talk about.
You have zero knowledge about Infinity-Box unlock procedure, so, please, stop to make Infinity-Box users confusing.
So, please, stop to post your genious ideas regarding Infinity-Box in future due to your advices is really non-professional.
If you want to show to somebody that you know what you know word CPU this is not a reason to give me stupid advices that I must do and that I must not do.
Thank you for your kind understanding !
p.s.
read again your own message: http://www.gsmhosting.net/vbb/showpost.php?p=2977698&postcount=2
If you even can't press "unlock" button but try to make another action what you talk about here ?
Please, try to understand that "unlock" procedure should be done with big "unlock" button but not with "stop" button (or other buttons), hope this will help you in your future understanding of phone structure.
Hello infinity team i have in my hand pantech q99 they said it is g500 and i want to flash it for french language can i do that with infinity would you like any extra information i am ready
InfinitySupport
11-29-2008, 15:57
Hello,
We have no any ideas and flash files for Q99 model. I don't think we will be able to help with French language for this model.
Hello,
We have no any ideas and flash files for Q99 model. I don't think we will be able to help with French language for this model.
but it is the same as G500 model