zonetrichur
03-17-2007, 19:06
i have a e616v white screen .i already posted two posts regarding my problem following links.
http://forum.gsmhosting.com/vbb/showthread.php?t=382448
http://forum.gsmhosting.com/vbb/showthread.php?t=383927
using above software flashing stopped at an error message"""read com port
operation:the application tried to transmit a charactor,but
the output buffer was full""""
i did not get an answer up to today.
in between product supporter HITIBITI gave me a link of another flash software.its procedure as below
""""for E616and E616v are same ( olso E313 and E313vsame )
all waht you need is folow thsi steps :
1. Extract SW07 and USB drivers
2. Install IPLS 1.0.1 from folder SW07
3. Install Daemon Tool from SW07 folder(create virtual drives on PC), mount NEC616_FA1 image file at virtual drive.
4. Install USB drivers for phone with modified USB unlock cable without battery
5. Run IPLSD1_IT_099_05fa1_e616_H1 from virtual drive destination. Check that IPLS detect same COM port as OBEX COM port(look in Properties in My Computer).
6. Push start and take a cup of coffee, it takes about 25 min."""
as in above fifth step Run IPLSD1_IT_099_05fa1_e616_H1 from virtual drive destination. Check that IPLS detect same COM port as OBEX COM port(look in Properties in My Computer).--i can not find above file
IPLSD1_IT_099_05fa1_e616_H1 in my systom.where is it?also did not understand the "IPLS detect same COM port as OBEX COM port""
have u got idea of my problem ..thank u
http://forum.gsmhosting.com/vbb/showthread.php?t=382448
http://forum.gsmhosting.com/vbb/showthread.php?t=383927
using above software flashing stopped at an error message"""read com port
operation:the application tried to transmit a charactor,but
the output buffer was full""""
i did not get an answer up to today.
in between product supporter HITIBITI gave me a link of another flash software.its procedure as below
""""for E616and E616v are same ( olso E313 and E313vsame )
all waht you need is folow thsi steps :
1. Extract SW07 and USB drivers
2. Install IPLS 1.0.1 from folder SW07
3. Install Daemon Tool from SW07 folder(create virtual drives on PC), mount NEC616_FA1 image file at virtual drive.
4. Install USB drivers for phone with modified USB unlock cable without battery
5. Run IPLSD1_IT_099_05fa1_e616_H1 from virtual drive destination. Check that IPLS detect same COM port as OBEX COM port(look in Properties in My Computer).
6. Push start and take a cup of coffee, it takes about 25 min."""
as in above fifth step Run IPLSD1_IT_099_05fa1_e616_H1 from virtual drive destination. Check that IPLS detect same COM port as OBEX COM port(look in Properties in My Computer).--i can not find above file
IPLSD1_IT_099_05fa1_e616_H1 in my systom.where is it?also did not understand the "IPLS detect same COM port as OBEX COM port""
have u got idea of my problem ..thank u