PDA

View Full Version : How about Chinese dual Simcard phones flash files and pinouts?

polifon
03-30-2007, 17:24
Can see that models here : http://www.ipmart.com/main/browse.php?&cat=1762
I bought 14 pcs of these phones : http://www.ipmart.com/main/product/A666,Dual,SIM,Card,Phone,Black,21251.php?cat=1762&prod=21251
and want write russian lang on it,
for example that phone: http://www.ipmart.com/main/product/Ya,Xing,E50,Dual,SIM,Card,Phone,19627.php?cat=1762&sort=featured_item&prod=19627 have russian lang in menu and both of these models menues absolutely same.
InfinitySupport
03-30-2007, 20:32
Read FAQ to see info about cables and pinouts: http://forum.gsmhosting.com/vbb/showthread.php?t=342807
Flash files: please, visit support area.
polifon
03-31-2007, 17:26
Read FAQ to see info about cables and pinouts: http://forum.gsmhosting.com/vbb/showthread.php?t=342807
Flash files: please, visit support area.
Sorry but i cant find any pinout/flashfile for this phones.
Just look inside tis phones:
InfinitySupport
03-31-2007, 23:54
Hello,

Here is additional information about pinouts:
http://forum.gsmhosting.com/vbb/showpost.php?p=2212036&postcount=7
polifon
04-01-2007, 15:06
How to find pinout for unknown model:

1. find Gnd pin
2. find Charge pins
3. find +Battery pins
4. connect cable Gnd to phone Gnd
5. try to connect cable Rx/Tx wires to all phone contacts one by one (except Gnd, Charge, + Battery) and try to read flash
6. if flash read procedure can start this means that pinout found Ok and you can make other operations

if i have usb cable which came with phone can i get some info about its pinouts?
brain00000
11-08-2007, 05:24
base is same like mentioned above
InfinityHelp
11-08-2007, 11:42
hello!

as i see- not much other pins is used in this phone.
you can try all other used pins one by one.
to make brute force more easyer- you can use thin wires soldered to all needed pins,
other wires sides soldered to IC socet. Seting Tx, rx is done by inserting needles toneeded positions
brain00000
11-10-2007, 18:49
Sir plz help me i am i Neeeeeeeeeeeeeeed Only Pinout
Plz Urgant
http://forum.gsmhosting.com/vbb/attachment.php?attachmentid=101730&d=1175433844

i will be thankful
i have try to find pinouts through Team method but unable to find