View Full Version : V3 No display
katalyst
04-02-2007, 23:27
Hi guys...
When I power on the razor both screens are blank (no light). I'm pretty sure there's nothing wrong with it's keypad flex cable and LCDs because I've tested them with another PCB. And I'm positive that it's not a software issue because the phone can still call. Can anyone please be kind and provide me with a solution?? :confused:
Thanks in advance
Umbabaraumba
04-02-2007, 23:55
Use SmartClip - make Repair PDS and write fuullflash with checked "Overwrite boot area"!! After make unlock!!
Umbabaraumba
04-02-2007, 23:59
If no success,may be hardware problem!! Try this method - see the picture!!!
katalyst
04-03-2007, 20:24
Umbabaraumba:
Thank you so much for looking out!!!!!! So awesome to have cool people like you on this forum. I'll definitely try the solutions you provided and post the results.
Thanks again.
amirbutt
04-05-2007, 05:23
Hy cool guy i also have problem with 3V
My phone is not booting
i have flashed my set by smart clip. sold its cpu and other Ic's but it is still not working
nizou_gsm
08-18-2007, 12:53
gooooooooooooood jumper solution
pradeep.k
08-19-2007, 20:50
my v3 is not working keypad plz post me
meo786pk
08-20-2007, 07:54
Dear brother, check it, try it and post the results.
my v3 is not working keypad plz post me
katalyst
08-21-2007, 06:54
Wow... finally had a chance to try the V3 no display pic posted by Umbabarumba and it worked 100%!!!!!!!!!!!!!!!!!!!!!!!!!!
bluejack22002
08-30-2009, 02:35
I have made the jumper in the picture, and flash, the flex cable is good, and the lcd too. and my v3 is black display. please any advice??
zakiyyboss
09-02-2009, 02:28
I have made the jumper in the picture, and flash, the flex cable is good, and the lcd too. and my v3 is black display. please any advice??
Might be the SOCKET is DAMAGE take a MICROSCOPE and see if all pins are GOOD !!
olwal cleophas
09-02-2009, 18:25
thnx it waks hpy 4 u