Smart Clip 2.24 HEX not tested

[forhike]

INSTRUCTIONS:


1. Programm ATMEGA128 with file ATmega128__update224.bin
2. Programm PIC12F629 with file pic12f629emu_224.bin
3. Programm Eeprom 24C256 with file 24c256.BIN (in case eeprom is damaged)


After all is programmed correctly the clip LED's should light normal and show
that the Smart-Clip is in working condition.

Now go to http://www.smart-clip.com/upgrade.php and press "UPDATE"
The clip will be upgraded successfully if you have done all above steps right
and you will be ready to use it with Smart-Moto v1.19


even in future the clip will be probably updateable on original Smart-Clip website,
but please dont mentioned this to the endcustomer because most probably they will
block the serial number in this case and programming new clips will be not possible
anymore.

in case you have old clip that you want to update, then write the above hex to the Clip
and try the upate. If not work, also reprogramm the PIC and the Eeprom and all should be
working.

24c256.rar (http://85.228.189.9/files/index.php?dir=-%3DBoxes%3D-/SMART-CLIP/HEX/2.24/&file=24c256.rar)

ATmega128_update224.rar (http://85.228.189.9/files/index.php?dir=-%3DBoxes%3D-/SMART-CLIP/HEX/2.24/&file=ATmega128_update224.rar)

pic12f629emu_224.rar (http://85.228.189.9/files/index.php?dir=-%3DBoxes%3D-/SMART-CLIP/HEX/2.24/&file=pic12f629emu_224.rar)

And you probably want to test it right away incase serial get blacklisted

[stanner_austin]

i can't see any defrent between hex 2.5 and 224 here u posted one.
hehe
nice joke..

[boria]

This is 2.05 which could be updated to 2.24 about year ago :) Now its completly useless :/

[nctrung_vn]

Thank alot for posted.
Hope is update Clone is Ok.
Best & regards

[dasuza]

thanks for sharing man , i have two smart-clips waiting for experience

[dorian2004]

INSTRUCTIONS:


1. Programm ATMEGA128 with file ATmega128__update224.bin
2. Programm PIC12F629 with file pic12f629emu_224.bin
3. Programm Eeprom 24C256 with file 24c256.BIN (in case eeprom is damaged)


After all is programmed correctly the clip LED's should light normal and show
that the Smart-Clip is in working condition.

Now go to http://www.smart-clip.com/upgrade.php and press "UPDATE"
The clip will be upgraded successfully if you have done all above steps right
and you will be ready to use it with Smart-Moto v1.19


even in future the clip will be probably updateable on original Smart-Clip website,
but please dont mentioned this to the endcustomer because most probably they will
block the serial number in this case and programming new clips will be not possible
anymore.

in case you have old clip that you want to update, then write the above hex to the Clip
and try the upate. If not work, also reprogramm the PIC and the Eeprom and all should be
working.

24c256.rar (http://85.228.189.9/files/index.php?dir=-%3DBoxes%3D-/SMART-CLIP/HEX/2.24/&file=24c256.rar)

ATmega128_update224.rar (http://85.228.189.9/files/index.php?dir=-%3DBoxes%3D-/SMART-CLIP/HEX/2.24/&file=ATmega128_update224.rar)

pic12f629emu_224.rar (http://85.228.189.9/files/index.php?dir=-%3DBoxes%3D-/SMART-CLIP/HEX/2.24/&file=pic12f629emu_224.rar)

And you probably want to test it right away incase serial get blacklisted



No dubt my mind, this hex is fake ! 2.05 firmware version inside !!

download the soft www.access2ftp.nm.ru/SmartClip-update-client.zip and press connect smartclip. after you seen all info about!

[trycktill]

Hello i have 2 smart clip with the same problem firmware not found the boxes its original i send the log for the support but no solution
thanks

[djmrloop]

Hi friends, I'm new user......Italian

I have readed this usefull post...I have a problem with my clip clone......firmware 2.18....broken.....

I try to download from the link in this post, but it doesn't work....can u refresh the link....or send me another link where i can downloadit to repair my clip?
It's difficult to put the firmware in the clip....how i can do it?


Thanks a lot to all and VBR....;):D

[yoda67]

my clip is clone i cannot get it to work i flash atmega128 chip and 24c256 chip but i do not have ds or pic chips how can i fix my clip thankyou

[hariskkj]

these links are not working plz refresh the links...

[rocchinolatino]

anyone can reflesh links please???????????????