Cect D900-V666 Dead !

[ticoichip]

I try to flash Firmware + Eeprom in support area:
-----------------------------------------------------
1. CM_adv_Samsung-D900-E900_SZMI26_05C_PCB01_GPRS_MT6226_S01.S630RUS_V01_ 16m_En_Ru.B0M
2. CM_eeprom_Samsung-D900-E900_SZMI26_05C_PCB01_GPRS_MT6226_S01.S630RUS_V01_ 16m_En_Ru.B0E.
----------------------------------------------------
i have problem.But i dont understand what is this .!
Pls explain to me
Thanks
P/s: First is same picture.When i click YES . I have log:
--------------------------------------------------
COM6 selected
Device: Autodetect
Checking data, wait...
Action: Flash write
"smart write" active
Write: Firmware
Skip: Customization
Skip: Language Pack
Write: Eeprom
Boot...
Press and HOLD Power button now !
baud autodetection active
19200
Connecting, wait...
Initializing[6226:8A02]...
Release Power button now !
Boot Done
Initialize...
detecting chip[00] in region[00]...
flash: 90009000900090
flash: 39EA1000000000
flash: B000B000B000B0
flash: 39EA1000000000
flash: Sharp LRS1386, LRS1395-F2, LRS1828-F2, LRS1392 T 8Mb
detecting chip[01] in region[00]...
flash: 5A535018101810
flash: 5A535000000000
flash: 5A535018101810
flash: 5A535000000000
total number of flash chip detected: 01
Initialize Done
Set baud...
slowest
Set baud Done
Check space...
operation mode: Fast detection mode
device parameters autodetection in progress..
detecting chip[00] in region[00]...
flash: B000B000B000B0
flash: 39EA1000000000
flash: B000B000B000B0
flash: 39EA1000000000
flash: Sharp LRS1386, LRS1395-F2, LRS1828-F2, LRS1392 T 8Mb
detecting chip[01] in region[00]...
flash: 5A535018101810
flash: 5A535000000000
flash: 5A535018101810
flash: 5A535000000000
total number of flash chip detected: 01
total flash region size: 00800000
detecting eeprom area in 1 chip(s)...
flash: B000B000B000B0
flash: 39EA1000000000
flash: B000B000B000B0
flash: 39EA1000000000
checking area[00000000]: 00000000-007FFFFF...
Can't detect eeprom area
Do you want to use standard eeprom address[00700000] ?
standard eeprom address selected by user
detecting eeprom size...
eeprom size: 00100000
eeprom chip: 00
eeprom area detected[00000000]: 00700000-007FFFFF
detect device identification, method #1...
detection phase #1...
.
detection phase #2...
.................................................. ..............
Err: device identification detection failed, no any information found
flash: B000B000B000B0
flash: 39EA1000000000
flash: B000B000B000B0
flash: 39EA1000000000
reading [eeprom]...
file saved: backup_eeprom_20070412-040646.B0E.bin
Check space Done
Manipulation...
Manipulation Done
Finalization...
Finalization Done
Write...
Area: Firmware
flash: B000B000B000B0
flash: 39EA1000000000
flash: B000B000B000B0
flash: 39EA1000000000
Write: Firmware
Err: no any expected answer
Err: flash write error: 00000000:00002000
Err: wrong answer[3B]
Err: flash write error: 00000000:00002000
Err: no any expected answer
Err: flash write error: 00000000:00002000
Err: wrong answer[3B]
Err: flash write error: 00000000:00002000
Err: wrong answer[3B]
Err: flash write error: 00000000:00002000
Err: wrong answer[3B]
Err: flash write error: 00000000:00002000
Err: wrong answer[3B]
Err: flash write error: 00000000:00002000
Err: wrong answer[3B]
Err: flash write error: 00000000:00002000
Write Fail
Finished, time used: 396 sec
----------------------

[InfinitySupport]

Hi,

1. go to "Settings" page
2. change state (make it On or Off) of "advanced chip detection" box
3. make "smart write" enabled (it's need for faster operation)
4. flash phone again

[ticoichip]

i try to do with your help.But i stil have problem.
This is new picture about my problem and my log:
-------------
COM6 selected
Device: Autodetect
Checking data, wait...
Action: Flash write
"smart write" active
Write: Firmware
Skip: Customization
Skip: Language Pack
Skip: Eeprom
Boot...
Press and HOLD Power button now !
baud autodetection active
19200
Connecting, wait...
Initializing[6226:8A02]...
Release Power button now !
Boot Done
Initialize...
detecting chip[00] in region[00]...
flash: 90009000900090
flash: 39EA1000000000
flash: B000B000B000B0
flash: 39EA1000000000
flash: Sharp LRS1386, LRS1395-F2, LRS1828-F2, LRS1392 T 8Mb
detecting chip[01] in region[00]...
flash: 5A535018101810
flash: 5A535000000000
flash: 5A535018101810
flash: 5A535000000000
total number of flash chip detected: 01
Initialize Done
Set baud...
230400
Set baud Done
Check space...
operation mode: Fast detection mode
device parameters autodetection in progress..
detecting chip[00] in region[00]...
flash: 99881100110011
flash: B000B000000000
flash: B000B000B000B0
flash: 39EA1000000000
flash: Sharp LRS1386, LRS1395-F2, LRS1828-F2, LRS1392 T 8Mb
detecting chip[01] in region[00]...
flash: 5A535018101810
flash: 99881100000000
flash: 5A535018101810
flash: 5A535000000000
total number of flash chip detected: 01
total flash region size: 00800000
detecting eeprom area in 1 chip(s)...
flash: 99881100110011
flash: B000B000000000
flash: B000B000B000B0
flash: 39EA1000000000
checking area[00000000]: 00000000-007FFFFF...
Can't detect eeprom area
Do you want to use standard eeprom address[00700000] ?
standard eeprom address selected by user
detecting eeprom size...
eeprom size: 00100000
eeprom chip: 00
eeprom area detected[00000000]: 00700000-007FFFFF
detect device identification, method #1...
detection phase #1...
Err: no any expected answer
Err: unexpected termination/freez: 00000000
detection phase #2...
Err: device identification detection failed, no any information found
Err: no any expected answer
Finished, time used: 189 sec
Remove/Install battery now !
---------

[InfinitySupport]

It looks like your phone has damaged flash chip and maybe other hardware problem, f.e. water inside. Probably need to reball flash chip.

[ticoichip]

Phone dead by format = MTK-super doctor.
I try to reball CPU, Flash chip IC but i still have problem.

[InfinitySupport]

Try to install other flash chip (16 Mb size). According to information from log there is a big chance that flash chip dead.