Desciption ChineseMiracle !

[ticoichip]

I creat topic for Mp3/Mp4 phone with software problem.If supporter dont like it,pls delete it !
------------
I have D900i (phone working ) chip 6219.Phone cant dectect infomation . But with N66i,phone can dectect infomation. Why ?.Can you explain to me !
----------------------------------
COM6 selected
Device: Autodetect
Checking data, wait...
Action: Read flash
Boot...
Press and HOLD Power button now !
baud autodetection active
Err: boot error[01] can't detect device
Release Power button now !
In case of initial connection problem: on/off "Boot baudrate autoselect" box.
Boot Fail
Finished, time used: 3 sec
Remove/Install battery now !
COM6 selected
Device: Autodetect
Checking data, wait...
Action: Read flash
Boot...
Press and HOLD Power button now !
baud autodetection active
19200
Connecting, wait...
Initializing[6219:8A01]...
Release Power button now !
Boot Done
Initialize...
detecting chip[00] in region[00]...
flash: 01227E22212200
flash: 29EA0000000000
flash: AMD/Fujitsu std [0004x010000 003Ex040000 0004x010000] 16Mb
total number of flash chip detected: 01
Initialize Done
Set baud...
115200
Set baud Done
Check space...
operation mode: Fast detection mode
device parameters autodetection in progress..
detecting chip[00] in region[00]...
flash: 01227E22212200
flash: 29EA0000000000
flash: AMD/Fujitsu std [0004x010000 003Ex040000 0004x010000] 16Mb
total number of flash chip detected: 01
total flash region size: 01000000
detecting eeprom area in 1 chip(s)...
flash: 01227E22212200
flash: 29EA0000000000
checking area[00000000]: 00000000-00FFFFFF...
eeprom found near: 00E00000
detecting eeprom size...
eeprom size: 00200000
eeprom chip: 00
eeprom area detected[00000000]: 00E00000-00FFFFFF
detect device identification, method #1...
detection phase #1...
.
detection phase #2...
.................................................. ..............
Err: device identification detection failed, no any information found <<<-------- What is my problem ?
flash: 01227E22212200
flash: 29EA0000000000
reading [flash_part_1_of_1]...
file saved: backup_flash_part_1_of_1_20070413-092746.B0X.bin
Finished, time used: 1892 sec
---------------------------------
B.R
Ticoichip
p/s: sorry about my english !

[ticoichip]

When i read back o2s dopod chip6226. Software cut 2 part.
IF i wanna write backup.How to do?

+This is 2 file of 2part:

##. backup_flash[M500TV_I7_PCB01_GPRS_MT6226_S01.00_0_0607.BIN]_part_1_of_2_20020101-002459.B0X {5.286MB}
##. backup_flash[M500TV_I7_PCB01_GPRS_MT6226_S01.00_0_0607.BIN]_part_2_of_2_20020101-003256.B0X {4.834MB}



B.R
Ticoichip

[InfinitySupport]

Hi,

thread about mp3/4: what you talk about ?

If you want to write back 2 parts phone backup:
1. load in software first part and flash it
2. load in software second part and flash it
backup file contain flash data and address data so each part will be written in correct flash part.

About your working D900i. What is the problem with working phone and what you need to repair in working phone ?

About error that you see: it's just information message and this information message not affect to softwware functionality. it depends on phone firmware.

[ticoichip]

Thank for your reply !

About D900i is working fine. I wanna backup flash file.
I always have that problem with chip 6219. Before i have same problem with Ê80 chip 6219. But chip 6226 is all ok

B.R
Ticoichip

[ticoichip]

Thank for your reply !

Mp3/Mp4 same name Chinese Miracle i think !

About D900i is working fine. I wanna backup flash file.
I always have that problem with chip 6219. Before i have same problem with E680 chip 6219. But chip 6226 is all ok

B.R
Ticoichip

[ticoichip]

Is that bugs in software?
Only chip 6219 cant infomation! I tested 2phones ( D900i, E680 )

B.R
Ticoichip

[InfinitySupport]

It's not a bug !
The only reason that you see this message: your phone has no special "identification area" inside eeprom so software can't detect something that not exist in phone !

[ticoichip]

Thank for your reply. This is GREAT TEAM support !

B.R
Ticoichip