703 SH,stops on flashing 2nd patch flash

[Ryuken]

Hello,does anybody encounters this problem on 703sh,stops on 2nd part of unlock_patch_flash?Also tried in cruiser the same result..

Check logs,any help would be much appreciated :)

GUI v0.91380076/UNI
Card serial:0000
Loaded 51 flash descriptors
Open COM port OK
Abort all operations.
Elapsed:23 secs.
Open COM port OK
ChipID:7100,EMP protocol:0301
PHONE IS BROWN
FLASH CID detected:24
Speed:921600
DB2000 only supports 460800,fallback.
OTP LOCKED:1 CID:24 PAF:0 IMEI:35028900136796 CERT:BROWN
Loader:040622 1339 LLECXC1325712_PRODUCTION P2J
Flash ID check:B00B
Flash props sent ok
Switching to USB...
Phone stays at current interface.
writing G:\ryuken\GSM-Devices\SETool\SE_TOOL3\Flashfiles\Sharp\703\703 Patch Unlock\ch703patch\ch703patch_part1.ssw
CURRENT FLASH FILE CID:254
SSW uses dynamic hash, dynamic hash len is:528
Will flash 528 blocks...
SSW loading returns:0
writing G:\ryuken\GSM-Devices\SETool\SE_TOOL3\Flashfiles\Sharp\703\703 Patch Unlock\ch703patch\ch703patch_part2.ssw
CURRENT FLASH FILE CID:254
SSW uses dynamic hash, dynamic hash len is:232
Will flash 232 blocks...
verify block error
last blk:22240000,00010000
Elapsed:971 secs.