About read backup Chinese Miracle

[ticoichip]

This is log when i backup phone

-------------------

COM6 selected
Device: Autodetect
Checking data, wait...
Action: Read flash
Boot...
Press and HOLD Power button now !
Connecting, wait...
Initializing[6226:8A02]...
Release Power button now !
Boot Done
Initialize...
detecting chip[00] in region[00]...
flash: 89880F00010001
flash: 89880F00000000
flash: Intel I28F128L18B85 B 16Mb
number of flash chip/regions detected: 01/01
Initialize Done
Set baud...
115200
Set baud Done
Check space...
operation mode: Fast detection mode
device parameters autodetection in progress..
detecting chip[00] in region[00]...
flash: 89880F00010001
flash: 89880F00000000
flash: Intel I28F128L18B85 B 16Mb
number of flash chip/regions detected: 01/01
total flash region size: 01000000
detecting eeprom area in 1 chip(s)...
flash: 89880F00010001
flash: 89880F00000000
checking area[00000000]: 00000000-00FFFFFF...
eeprom found near: 00E00000
detecting eeprom size...
eeprom size: 00200000
eeprom chip: 00
eeprom area detected[00000000]: 00E00000-00FFFFFF
detect device identification, method #1...
detection phase #1...
protocol version: 0004
2nd [enhanced] (or higher) generation model detected
Attention: read full flash backup before any action !
identification data Ok
identification data backup saved: id.D3789EF4.[DS6226_PCB01_GPRS_MT6226_S01.M416_H001_62260612CV1 2_C01_005.BIN_36128BA8].rpl
identification detection finished
device-id: D3789EF4
version sw1: DS6226_PCB01_GPRS_MT6226_S01.M416_H001_62260612CV1 2_C01_005.BIN
version sw2: M416.H001.62260612CV12.C01.005
detection phase #3...
.................................................. ..............
detect device parameters finished
flash: 89880F00010001
flash: 89880F00000000
reading [flash[DS6226_PCB01_GPRS_MT6226_S01.M416_H001_62260612CV1 2_C01_005.BIN]]...
Err: checksum mismatch: 00074800, retry... <<-----------What's problem?Sometimes i saw 2, 3, or 4 times
file saved: backup_flash[DS6226_PCB01_GPRS_MT6226_S01.M416_H001_62260612CV1 2_C01_005.BIN]_20070421-000459.B0M.bin
file saved: backup_system_log_D3789EF4_[DS6226_PCB01_GPRS_MT6226_S01.M416_H001_62260612CV1 2_C01_005.BIN]_36128BA8_20070421-000500.B0X.bin
Finished, time used: 199 sec
Remove/Install battery now !

----------------------------------------

Phone is working. I dont know how about this file. Is that good for rewrite?

I try to tick on/off "Boot baudrate autoselect" and "use advance chip detection method"

B.R

Ticoichip

[InfinitySupport]

@ticoichip

the main words in this log: "Err: checksum mismatch: 00074800, retry..."

This log show that software detected error and REPAIRED this this error during reading.

[ticoichip]

Thank you very much.