PDA

View Full Version : W220 DEAD with INFINITY


Umbabaraumba
04-23-2007, 11:07
I have 4 phones W220 for unlock and change language!! First I tryed to unlock!! When make PREPARE phone died and program displayed many error!!! I try flash and again displayed error!! Please help me!! The phones are new and wokred perfect!! This is log file prom program:

COM3 selected
Device: W220
Checking data, wait...
Action: Flash write
"smart write" active
Write: Firmware
Write: Flex
Write: Language Pack
Write: FFS/File system
Write: Images
Write: Melody
Write: Eeprom
Boot...
Phone should be Switched OFF !
Press Power button now !
Connecting...
Boot Done
Check Connection...
Check Connection Done
Set Baud...
Set Baud Done
Check Flash...
SW ver:
HW ver:
Check Flash Done
Check Parameters...
Check Parameters Done
Check Space...
Flash: 0089:886400010001
flash: Intel 28F640W18-T T 8Mb
Check Space Done
Check Data...
Check Data Done
Erasing...
erase operation not required
Erasing Done
Writing...
Write: Firmware
Flash: 0089:886400010001
flash: Intel 28F640W18-T T 8Mb
Err: answer#00
try#1 to recover write error at 00000000
Err: error checksum
try#2 to recover write error at 00000000
Err: error
try#3 to recover write error at 00000000
Err: answer#00
try#4 to recover write error at 00000000
Err: answer#00
try#5 to recover write error at 00000000
Err: answer#00
try#6 to recover write error at 00000000
Err: answer#00
try#1 to recover write error at 00002000
Err: answer#00
try#2 to recover write error at 00002000
Err: answer#00
try#3 to recover write error at 00002000
Err: answer#00
try#4 to recover write error at 00002000
Err: answer#00
try#5 to recover write error at 00002000
Err: answer#00
try#6 to recover write error at 00002000
Err: answer#00
try#1 to recover write error at 00004000
Err: answer#00
try#2 to recover write error at 00004000
Err: answer#00
try#3 to recover write error at 00004000
Err: answer#00
try#4 to recover write error at 00004000
Err: answer#00
try#5 to recover write error at 00004000
Err: answer#00
try#6 to recover write error at 00004000
Err: answer#00
try#1 to recover write error at 00006000
Err: answer#00
try#2 to recover write error at 00006000
Err: answer#00
try#3 to recover write error at 00006000
Err: answer#00
try#4 to recover write error at 00006000
Err: answer#00
try#5 to recover write error at 00006000
Err: answer#00
try#6 to recover write error at 00006000
Err: answer#00
try#1 to recover write error at 00008000
Err: answer#00
try#2 to recover write error at 00008000
Err: answer#00
try#3 to recover write error at 00008000
Err: answer#00
try#4 to recover write error at 00008000
Err: answer#00
try#5 to recover write error at 00008000
Err: answer#00
try#6 to recover write error at 00008000
Err: answer#00
try#1 to recover write error at 0000A000
Err: answer#00
try#2 to recover write error at 0000A000
Err: answer#00
try#3 to recover write error at 0000A000
Err: answer#00
try#4 to recover write error at 0000A000
Err: answer#00
try#5 to recover write error at 0000A000
Err: answer#00
try#6 to recover write error at 0000A000
Err: answer#00
try#1 to recover write error at 0000C000
Err: answer#00
try#2 to recover write error at 0000C000
Err: answer#00
try#3 to recover write error at 0000C000
Err: answer#00
try#4 to recover write error at 0000C000
Err: answer#00
try#5 to recover write error at 0000C000
Err: answer#00
try#6 to recover write error at 0000C000
Err: answer#00
try#1 to recover write error at 0000E000
Err: answer#00
try#2 to recover write error at 0000E000
Err: answer#00
try#3 to recover write error at 0000E000
Err: answer#00
try#4 to recover write error at 0000E000
Err: answer#00
try#5 to recover write error at 0000E000
Err: answer#00
try#6 to recover write error at 0000E000
Writing Fail
Finished, time used: 415 sec
Remove/Install battery now !

Please tell me the way to repair phone!! I want flash with BUlgarian language!! Which files must selected to flash???

InfinitySupport
04-23-2007, 11:25
Hi,

1. use latest Moto02
2. charge battery completely
3. files: http://www.infinity-box.com/download/index.php

Flash Files and Language Pack description: you can see how to select correct flash files and what files to use to install language that you need.
Available flash files for all World regions.

Infinity-Box_FlashFilesDescription.rar (30 KB)


btw, it's good way to make your thread very good visible to write
"DEAD with". Why not write "dead WITH" ?

Umbabaraumba
04-23-2007, 11:52
I load 5 flash files to program (FFS/File system and Eeprom files not loaded):

W220_Flex_0340-062_RTLGRC_2V41.6AF.bin
W220_Images_0220-005_T678AT_2V25.6AG.bin
W220_LP_0310-028_CMCS_0V00_V1_En_Gr_Ru_Bg_Ro.6AP.bin
W220_Main_7-1130-000_2006-Sep-14.6AM.bin
W220_Melody_0210-005_T678AT_2V25.6AG.bin

Battery full charge!!Program again displayer errors!! Must I load FFS/File system and Eeprom files and which??
This is log:

COM3 selected
Device: W220
Checking data, wait...
Action: Flash write
"smart write" active
Write: Firmware
Write: Flex
Write: Language Pack
Skip: FFS/File system
Write: Images
Write: Melody
Skip: Eeprom
Boot...
Phone should be Switched OFF !
Press Power button now !
Connecting...
Boot Done
Check Connection...
Check Connection Done
Set Baud...
Set Baud Done
Check Flash...
SW ver:
HW ver:
Check Flash Done
Check Parameters...
Check Parameters Done
Check Space...
Flash: 0089:886400010001
flash: Intel 28F640W18-T T 8Mb
Check Space Done
Check Data...
Check Data Done
Erasing...
erase operation not required
Erasing Done
Writing...
Write: Firmware
Flash: 0089:886400010001
flash: Intel 28F640W18-T T 8Mb
Err: answer#00
try#1 to recover write error at 00000000
Err: error checksum
try#2 to recover write error at 00000000
Err: error
try#3 to recover write error at 00000000
Err: answer#00
try#4 to recover write error at 00000000
Err: answer#00
try#5 to recover write error at 00000000
Err: answer#00
try#6 to recover write error at 00000000
Err: answer#00
try#1 to recover write error at 00002000
Err: answer#00
try#2 to recover write error at 00002000
Err: answer#00
try#3 to recover write error at 00002000
Err: answer#00
try#4 to recover write error at 00002000
Err: answer#00
try#5 to recover write error at 00002000
Err: answer#00
try#6 to recover write error at 00002000
Err: answer#00
try#1 to recover write error at 00004000
Err: answer#00
try#2 to recover write error at 00004000
Err: answer#00
try#3 to recover write error at 00004000
Err: answer#00
try#4 to recover write error at 00004000
Err: answer#00
try#5 to recover write error at 00004000
Err: answer#00
try#6 to recover write error at 00004000
Err: answer#00
try#1 to recover write error at 00006000
Err: answer#00
try#2 to recover write error at 00006000
Err: answer#00
try#3 to recover write error at 00006000
Err: answer#00
try#4 to recover write error at 00006000
Err: answer#00
try#5 to recover write error at 00006000
Err: answer#00
try#6 to recover write error at 00006000
Err: answer#00
try#1 to recover write error at 00008000
Err: answer#00
try#2 to recover write error at 00008000
Err: answer#00
try#3 to recover write error at 00008000
Err: answer#00
try#4 to recover write error at 00008000
Err: answer#00
try#5 to recover write error at 00008000
Err: answer#00
try#6 to recover write error at 00008000
Err: answer#00
try#1 to recover write error at 0000A000
Err: answer#00
try#2 to recover write error at 0000A000
Err: answer#00
try#3 to recover write error at 0000A000
Err: answer#00
try#4 to recover write error at 0000A000
Err: answer#00
try#5 to recover write error at 0000A000
Err: answer#00
try#6 to recover write error at 0000A000
Err: answer#00
try#1 to recover write error at 0000C000
Err: answer#00
try#2 to recover write error at 0000C000
Err: answer#00
try#3 to recover write error at 0000C000
Err: answer#00
try#4 to recover write error at 0000C000
Err: answer#00
try#5 to recover write error at 0000C000
Err: answer#00
try#6 to recover write error at 0000C000
Err: answer#00
try#1 to recover write error at 0000E000
Err: answer#00
try#2 to recover write error at 0000E000
Err: answer#00
try#3 to recover write error at 0000E000
Err: answer#00
try#4 to recover write error at 0000E000
Err: answer#00
try#5 to recover write error at 0000E000
Err: answer#00
try#6 to recover write error at 0000E000
Writing Fail
Finished, time used: 405 sec
Remove/Install battery now !

PLEASE TELL ME STEP BY STEP TO REPAIR!!!

Umbabaraumba
04-23-2007, 12:01
This is operation log from program(I change manual Infinity SN to: xxxx:xxxx)!!!

InfinitySupport
04-23-2007, 12:33
PLEASE TELL ME STEP BY STEP TO REPAIR!!!

Hello,

I respect your request in capital letters.

Yes, I read your first message good and I see your explanation that phone is new.

What to do: please, open phone and check that phone hardware is Ok. Probably flash chip bad soldered, probably water inside or something else.

What files to use: please, see my previous message and follow documentation. In fact flash process dont depends on selected files so I think you have selected right files already.

Umbabaraumba
04-23-2007, 12:58
Brother,the phones is NEW and hardware OK!!! I tryed to another phones and again phone died!!! Now I have 2 dead phones!! PLEASE HELP ME URGENT!!!

Umbabaraumba
04-23-2007, 14:11
I READ FLASH from worked and unlocked phone!! Others 2 phones I unlocked via codes!! Can I make write fullflash to died phone??And which windows must checked to select the file??? Read file is: backup_full_part_1_of_1_20070423-145534.6AX.bin (3.66MB)

service4gsm
04-23-2007, 15:00
@Umbabaraumba

I was have totaly same problem before 3m as you have, on new phone and unlock operation.After that phone refuse to be flashed with that error.
After many trys suddenly phone accept flashing and unlock.
So do not open phone just keep trying and also try pc reboot.

wbr.

InfinitySupport
04-23-2007, 17:19
@Umbabaraumba
flash process not depends on selected files so there is no difference what files to use.
As I can see from log it's problem with flash process, not a problem with files, backups or something else. It's a problem with writing data into flash chip.
Remove battery from phone, leave it for some time, try to flash phone again.

Umbabaraumba
04-23-2007, 21:43
Problem is not with writing data into flash chip!!! I repair both phones with PC ReDownload Version 4.3.3 and use T191 COM cable!!! Phones flashing and working perfect!!! I try many many times with Infinity,but not success!!! Please fix this bug!!!

hassan tawrirti
04-23-2007, 21:55
can you upload this soft br

Umbabaraumba
04-24-2007, 08:56
Use this link: http://rapidshare.com/files/27616386/W220_C168_PC_ReDownload.rar

.::koolfriend4u::.
05-10-2007, 22:01
THNKS @ Umbabaraumba FOR THIS SOFT..

DID D INFINITY-TEAM SOLVD THIS PROBLM NOW WTH ITS LATST EXE??

BCOZ,IM HAVING FEW PHONES TO GET UNLOCK!!

THOUGH,IM HAVING SMART CLIP..I WNT TO CONFIRM THT,WHTHR ITS W220 UNLOCK BUGS FREE IN INFINITY??
THNKS...

soki1981
05-30-2007, 10:30
i confirm this problem in infinity. It kills W220, i have to try to repair this with attached by Umbabaraumba software. Please infinity team FIX this BUG!

InfinityHelp
05-30-2007, 10:57
hello!
will check this ASAP

hackerbd
05-30-2007, 18:20
Infinity is the best flasher for w220.I m already recover 15 or more w220 phone.If you want to recover your phone follow up infinity flash file description.


BR
!!bdlshohel!!

yashtel
05-31-2007, 18:18
Mr. Infinity Support as you said to "Umbabaraumba " to check hardware if there is a hardware problem then shouldn't be on 4 sets, but what is the final solution to solve it????????????????????????

benguetcowboy1
06-15-2007, 09:40
i think theres a bug with the latest nersion of moto02....always enter imsi if unlocked with it and will result to FAILED to decrypt data when unlock with smartmoto.......REMEDY WRITE BACKUP EEPROM THEN UNLOCK WITH SMARTCLIP.INFINITY PLS CHECK BUG

dividpl
07-19-2007, 14:55
I Have This Same Problem Change Speed Flashing FROM 812500 To 406250 Now Everything It't Ok!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!

lacasapc
07-22-2007, 00:38
hello!
will check this ASAP

i need solution as well,
one of this phones died with same errors when unlocking,

please help me asap

Infinity-Box
07-22-2007, 10:09
i need solution as well,
one of this phones died with same errors when unlocking,

please help me asap


Change flashing speed from 812500 To 406250
post the result here

lacasapc
07-28-2007, 01:14
Change flashing speed from 812500 To 406250
post the result here
i did what says in other posts
removed battery and after some time put it back,
fully charged, then whote a whole pack (main, flex, lp, melody and images)
it came back to life, but with pack error,
then i flashed with another pack and came back to life but personal locked,
i read it in infinity and gave me lock number, put it and voila, everything alright,

but yesterday encountered another problem, that the phone was band 1900 and now its just 1800 (no signal in my country)(dominican republic)

i read a post that someone flashed his phone with sca 109a pack and its alright with spanish language an 1900 band, but when i go to support only main downloads, all other like flex, melody, images and lp are imposible to download, if someone has this files to share please let me know:D

Infinity-Box
07-28-2007, 09:54
[QUOTE=lacasapc;2605637]i did what says in other posts
removed battery and after some time put it back,
fully charged, then whote a whole pack (main, flex, lp, melody and images)
it came back to life, but with pack error,
then i flashed with another pack and came back to life but personal locked,
i read it in infinity and gave me lock number, put it and voila, everything alright,

but yesterday encountered another problem, that the phone was band 1900 and now its just 1800 (no signal in my country)(dominican republic)

i read a post that someone flashed his phone with sca 109a pack and its alright with spanish language an 1900 band, but when i go to support only main downloads, all other like flex, melody, images and lp are imposible to download, if someone has this files to share please let me know:D[/QUOTE

hi what do u mean flex , melody , lp are impossible to download?