New user - i have question - please help!!

[fingusio]

Hi

I buy Infinity from my friend. He don't use box so he can't help me.

I install my Infinity Box and when i press on "Device Manager" i have "USB Serial port (COM3)" (like in attached photo) - is it good?

I have Motorola C261 and i want Read Informations just for see how it work. So i run software, select COM3, press in soft "Read information" and:

COM3 selected
Action: read information
Device: C261
Checking data, wait...
Connect...
Press and HOLD Power button...

When i press power button nothing happend. Green led blinking very fast on box.

We must connect all cables to COM1 or USB connector in box?

Any sugestion?

br,
fingusio

[lechan]

com kabel motorola t191,i powinno dzialac.

[fingusio]

I use cable Panasonic G50.

I only have question that i install all ok? In manual write that must example "Infinity usb port (COM3)" in "Device Manager".

br,
fingusoo

[InfinityHelp]

hello!

for motorola phones is better to use regular RS232<>TTL cable.
but if you dont have it- then via box. Plug moto cable to left rj45 connector, this must be your problem if phone battery is ok

[InfinityHelp]

Also if LED blinking that means all ok with port selection

[fingusio]

Yes green LED blinking very fast. You say that plug cable to left connector? you mean there where write USB ?? I'm all time connect to right connector where is COM1.

br,
fingusio

[fingusio]

Ahhh.....

I use cable Motorola T191 from old good UniversalBox 3.0. Select in soft COM1 and press "Read Information" and all work OK now. All work OK now, so thread closed :) thnx for help :)

COM1 selected
Action: read information
Device: C261
Checking data, wait...
Connect...
Press and HOLD Power button...
Connecting...
initial boot phase complete
Release Power button !
Connect Done
Boot...
Boot Done
Set Baud...
115200
Set Baud Done
Check Flash-1...
SW version: 0.1.32
HW version: MOTOROLA_E58S
LP ver: LP8_0132
Flex ver: FLEX_90_64_3P02
cpu id: 08B6
imei eeprom: 358xxxxxxxxxxx
sp-locked: 26001.
Check Flash-1 Done
Check Flash-2...
Finished, time used: 14 sec
Remove/Install battery now !

br,
fingusio