@ INFINITY !! (-_-) wana support for TREND

[Faisal_Computer]

hello Brother ..... Please give us support for TREND mobiles specially TREND T100 wana support for flashing and user code

hope soon we will flashing of TREND T100 with infinity and as i know that no any box can flash it ( sory if i wrong )

Br

Faisal_Computer

[chiragp]

@faisal

if u have phone in hand then post all inside ic details

thanks

[zinoubinabil]

Question-4: I have new phone model and I want to see this model supported by Infinity-Box. What to do ?

Answer-4:
1. open phone, find CPU chip and Flash chip
2. send e-mail to InfinityHelp@yahoo.com.hk with the next info:
2.1. CPU chip name
2.2. Flash chip name
2.3. phone bottom connector type (photo, if available)
2.4. Gnd, Charge, +Battery pins location on phone connector
2.5. full text from phone back label (label under battery)
2.6. phone photo (or link to phone photo)
2.7. is it sp-locked or simfree phone
2.8. is it exist original data/com/usb cable in phone package
2.9. is it exist CD with original drivers in phone package
2.10. estimated phone price
2.11. any additional information
We will check your information and will tell you is it posible to make support for this model or not.

[Faisal_Computer]

@ infinity

PLEASE see this picture this is all info about that TREND T100

on next post see more pictures

Br

Faisal_Computer

[Faisal_Computer]

NEXT....

Br

Faisal_Computer

[Faisal_Computer]

infinity !!

i had posted all info that i have now Please tell us when we will flash and reset user code ?

Br

Faisal_Computer

[Infinity-Box]

infinity !!

i had posted all info that i have now Please tell us when we will flash and reset user code ?

Br

Faisal_Computer


we will get back to you shortly

[InfinitySupport]

@Faisal_Computer
this phone can be supported. If you still have this phone on hands please, try to find on PCB test points with names like "RXD, TXD, GND" and let me know about results.

also probably Rx and Tx can be found on this picture:
http://www.gsmhosting.com/vbb/attachment.php?attachmentid=109716&d=1180766346
1st pin from right: Gnd
2nd and 3rd pins from right: Rx/Tx
pls, try to use these pins and try to read flash from phone with "ChineseMiracle" software, lets see results (maybe need to try change Rx <-> Tx wires).

[Faisal_Computer]

@Faisal_Computer
this phone can be supported. If you still have this phone on hands please, try to find on PCB test points with names like "RXD, TXD, GND" and let me know about results.

also probably Rx and Tx can be found on this picture:
http://www.gsmhosting.com/vbb/attachment.php?attachmentid=109716&d=1180766346
1st pin from right: Gnd
2nd and 3rd pins from right: Rx/Tx
pls, try to use these pins and try to read flash from phone with "ChineseMiracle" software, lets see results (maybe need to try change Rx <-> Tx wires).

yes i have mobile on hand and yes i am trying now and will inform you soon !!

Br

Faisal_Computer

[Faisal_Computer]

YES ITS READING !!!

Brother any thing you need from this mobile ?

BR

Faisal_Computer

[Faisal_Computer]

COM5 selected
Device: Autodetect
Checking data, wait...
advanced flash detection active
Action: reset
Boot...
Press and HOLD Power button now !
baud autodetection active
19200
Connecting, wait...
Initializing[6205:8B00]...
Release Power button now !
Boot Done
Initialize...
detecting chip #00 in region #00...
flash: 01227E22022201
flash: 18E59F00000000
flash: Amd, AMD/Fujitsu std [0008x002000 007Ex010000 0008x002000] 8Mb
detecting chip #01 in region #00...
flash: 01227E22022201
flash: 18E59F00000000
flash: Amd, AMD/Fujitsu std [0008x002000 007Ex010000 0008x002000] 8Mb
number of flash chip/regions detected: 02/01
Initialize Done
Set baud...
921600
Set baud Done
Check space...
operation mode: Fast detection mode
device parameters autodetection in progress..
detecting chip #00 in region #00...
flash: 01227E22022201
flash: 18E59F00000000
flash: Amd, AMD/Fujitsu std [0008x002000 007Ex010000 0008x002000] 8Mb
detecting chip #01 in region #00...
flash: 01227E22022201
flash: 18E59F00000000
flash: Amd, AMD/Fujitsu std [0008x002000 007Ex010000 0008x002000] 8Mb
it's time to stop: 18F09FE518F09FE518F09FE518F09FE518F09FE518F09FE5
number of flash chip/regions detected: 01/01
total flash region size: 00800000
detecting eeprom area in 1 chip(s)...
flash: 01227E22022201
flash: 18E59F00000000
checking area[00000000]: 00000000-007FFFFF...
eeprom found near: 00700000
detecting eeprom size...
eeprom size: 00100000
eeprom chip: 00
eeprom area detected[00000000]: 00700000-007FFFFF
detect device identification, method #1...
detection phase #1...
.
detection phase #2...
.................................................. ..............
warning: identification information not found, possible reasons:
.old firmware type w/o identification
.damaged firmware
.damaged hardware
detection phase #3...
.................................................. ..............
detect device parameters finished
flash: 01227E22022201
flash: 18E59F00000000
reading [eeprom]...
file saved: backup_eeprom_20070602-164737.B0E.bin
Check space Done
Manipulation...
Manipulation Done
Finalization...
Finalization Done
Write...
formatting...
flash: 01227E22022201
flash: 18E59F00000000
Write Done
Finished, time used: 140 sec
Remove/Install battery now !


Br

Faisal_Computer

[Faisal_Computer]

COM5 selected
Device: Autodetect
Checking data, wait...
advanced flash detection active
Action: read flash
Boot...
Press and HOLD Power button now !
baud autodetection active
19200
Connecting, wait...
Initializing[6205:8B00]...
Release Power button now !
Boot Done
Initialize...
detecting chip #00 in region #00...
flash: 01227E22022201
flash: 18E59F00000000
flash: Amd, AMD/Fujitsu std [0008x002000 007Ex010000 0008x002000] 8Mb
detecting chip #01 in region #00...
flash: 01227E22022201
flash: 18E59F00000000
flash: Amd, AMD/Fujitsu std [0008x002000 007Ex010000 0008x002000] 8Mb
number of flash chip/regions detected: 02/01
Initialize Done
Set baud...
921600
Set baud Done
Check space...
operation mode: Fast detection mode
device parameters autodetection in progress..
detecting chip #00 in region #00...
flash: 01227E22022201
flash: 18E59F00000000
flash: Amd, AMD/Fujitsu std [0008x002000 007Ex010000 0008x002000] 8Mb
detecting chip #01 in region #00...
flash: 01227E22022201
flash: 18E59F00000000
flash: Amd, AMD/Fujitsu std [0008x002000 007Ex010000 0008x002000] 8Mb
it's time to stop: 18F09FE518F09FE518F09FE518F09FE518F09FE518F09FE5
number of flash chip/regions detected: 01/01
total flash region size: 00800000
detecting eeprom area in 1 chip(s)...
flash: 01227E22022201
flash: 18E59F00000000
checking area[00000000]: 00000000-007FFFFF...
eeprom found near: 00700000
detecting eeprom size...
eeprom size: 00100000
eeprom chip: 00
eeprom area detected[00000000]: 00700000-007FFFFF
detect device identification, method #1...
detection phase #1...
.
detection phase #2...
.................................................. ..............
warning: identification information not found, possible reasons:
.old firmware type w/o identification
.damaged firmware
.damaged hardware
detection phase #3...
.................................................. ..............
detect device parameters finished
flash: 01227E22022201
flash: 18E59F00000000
reading [flash]...
file saved: backup_flash_20070602-165606.B0M.bin
Finished, time used: 377 sec
Remove/Install battery now !


file saved 4.7 mb and its backup_flash_20070602-165606.B0M

Br

Faisal_Computer

[Faisal_Computer]

COM5 selected
Device: Autodetect
Checking data, wait...
advanced flash detection active
Action: read flash
Boot...
Press and HOLD Power button now !
baud autodetection active
19200
Connecting, wait...
Initializing[6205:8B00]...
Release Power button now !
Boot Done
Initialize...
detecting chip #00 in region #00...
flash: 01227E22022201
flash: 18E59F00000000
flash: Amd, AMD/Fujitsu std [0008x002000 007Ex010000 0008x002000] 8Mb
detecting chip #01 in region #00...
flash: 01227E22022201
flash: 18E59F00000000
flash: Amd, AMD/Fujitsu std [0008x002000 007Ex010000 0008x002000] 8Mb
number of flash chip/regions detected: 02/01
Initialize Done
Set baud...
921600
Set baud Done
Check space...
operation mode: Complete detection mode
device parameters autodetection in progress..
detecting chip #00 in region #00...
flash: 01227E22022201
flash: 18E59F00000000
flash: Amd, AMD/Fujitsu std [0008x002000 007Ex010000 0008x002000] 8Mb
detecting chip #01 in region #00...
flash: 01227E22022201
flash: 18E59F00000000
flash: Amd, AMD/Fujitsu std [0008x002000 007Ex010000 0008x002000] 8Mb
it's time to stop: 18F09FE518F09FE518F09FE518F09FE518F09FE518F09FE5
number of flash chip/regions detected: 01/01
total flash region size: 00800000
detecting eeprom area in 1 chip(s)...
flash: 01227E22022201
flash: 18E59F00000000
checking area[00000000]: 00000000-007FFFFF...
eeprom found near: 00700000
detecting eeprom size...
eeprom size: 00100000
eeprom chip: 00
eeprom area detected[00000000]: 00700000-007FFFFF
detect device identification, method #1...
detection phase #1...
.
detection phase #2...
.................................................. ..............
warning: identification information not found, possible reasons:
.old firmware type w/o identification
.damaged firmware
.damaged hardware
detection phase #3...
.................................................. ..............
detect device parameters finished
detecting firmware version...
................................
................................
...........................
firmware version: B,E00S2003.07.30`MAUI.05B.W06
detecting languages...
...............
language parameters detected
detected languages: En Ar
flash: 01227E22022201
flash: 18E59F00000000
reading [flash[B,E00S2003.07.30`MAUI.05B.W06]]...
file saved: backup_flash[B,E00S2003.07.30`MAUI.05B.W06]_20070602-172228.B0M.bin
Finished, time used: 460 sec
Remove/Install battery now !


Br

Faisal_Computer

[Faisal_Computer]

@ Infinity we are waiting for your !!

Br

Faisal_Computer

[zinoubinabil]

@ Infinity we are waiting for your !!

Br

Faisal_Computer
hi
pls if you have flash readed with seccess try to send it to InfinityHelp@yahoo.com.hk

[Faisal_Computer]

ok i will send

Br

Faisal_Computer

[Faisal_Computer]

Please check mail .....

Br

Faisal_computer

[InfinitySupport]

Hello,

mail received.
if you need to remove user code just press "user code" button in software that you have used for flash reading.
Flash file will be converted/uploaded in support area ASAP.

please, send me actual pinout description that you used for flash reading.

[Faisal_Computer]

Hello,

mail received.
if you need to remove user code just press "user code" button in software that you have used for flash reading.
Flash file will be converted/uploaded in support area ASAP.

please, send me actual pinout description that you used for flash reading.

Brother thanks for reply mail sended ! Please check it out

Br

Faisal_Computer

[paklink]

Hello,

mail received.
if you need to remove user code just press "user code" button in software that you have used for flash reading.
Flash file will be converted/uploaded in support area ASAP.

please, send me actual pinout description that you used for flash reading.

great work

can we repair dead mobile by this flash or u need flash from any dead mobile for check it ?

mobile only trun on power light when press power sw & hang on this point

[InfinitySupport]

Flash file in support area:
Trend-T100_MAUI.05B.W06.08.T100.V2.0.D_HEDY05_05B_HW_200 7-01-17_8m_En_Arabic

you can repair bugs/freez by "ffs format" and flashing with good firmware.

[alvis]

Brother thanks for reply mail sended ! Please check it out

Br

Faisal_Computer

plz upload the pinouts which u use to read the flash thanx
br
.::SARMAD ALVIS::.

[InfinitySupport]

plz upload the pinouts which u use to read the flash thanx
br

How about this:
http://www.gsmhosting.com/vbb/showpost.php?p=2490358&postcount=20

[99026]

is this true?>?? you gona suport psp flashing???? rx tx gnd via rj45

[InfinitySupport]

@99026
sorry but I don't understand your question. Could you, please, make more detailed description.

[Faisal_Computer]

@ InfinitySupport


REALLY THANKS !!!

Br

Faisal_Computer

[Faisal_Computer]

pin out that i tested is

1 = GND
2 = Rx
3 = Tx

TESTED by me and tell us here that this pin out works ?

Br

Faisal_Computer

[Faisal_Computer]

make this thread to stickly or creat a new thread by name ( now you can flash or repair TREND MOBILE with infinity )

hows that ?

Br

Faisal_computer

[Faisal_Computer]

when that flash file mobile is alive but hang on start up !!

i do all things but .......
Br

Faisal_computer

[shahjee]

in my hand TREND t181 fone,

will read flash and send ,

fone blinks and then off problem,

waitting for reply

[InfinitySupport]

when that flash file mobile is alive but hang on start up !!

i do all things but .......
Br

Faisal_computer

it was not found any problems in your backup file.
if phone still freez after "format ffs" you must check phone hardware.

[Faisal_Computer]

it was not found any problems in your backup file.
if phone still freez after "format ffs" you must check phone hardware.

Brother as you told me on ICQ i was sended flash file to yours mail Please check it out tell me !!

Thanks

Br

Faisal_Computer

[.:Tanveer.:]

i just remove t100 user code it's realy working thanks infinity box team and thanx br faisal computer for request trend support infinity team.

br tanveer

[IBMOBILES]

thanks alot , really its great work

[musa_bahi]

it is cool work thanks guy ;)

[sahil00150]

infinity support plz we need trend t100 flash files.......

[InfinitySupport]

infinity support plz we need trend t100 flash files.......

Just go to Infinity-Box support area and download Trend T100 files from \\flashfiles\\ChineseMiracle\\Trend folder

[r_irfankhan]

the easy way if you have vepro or xintel box connect it and format it or flash it. i did a lot or connect to vepro or xintel box then open your infinity box and change there port where your vepro port. and do it every thing with your trend.