N73 o2s dead after reflash. !

[ticoichip]

2 Phones working fine. It's only problem with Camera hang !

Now i flash phone with flash file in support area.

Phone cant create ASK

Phone name : Nokia N73-RH54 and O2s-K808

This is link download flash backup and system log ( N73 and o2s) :

ftp://ftp.saigonmobile.com.vn/Messi%20soft/soft%20computer/
username : fu0004
password :hoangthong

And this is my log flash :

------------------------------------------

Log opened: [5/8/2007] [2:49:30 PM]
App: C:\Program Files\InfinityBox\ChineseMiracle\ChineseMiracle.ex e
Loading data, wait...
[Infinity Box] v1.28
S/N: 2277:010A
Wait...
Current device: Autodetect
Done
Loading file v.02...
CM_adv_Nokia-N73d_SZMI26_05C_RUIXINGXING_PCB01_GPRS_MT6226_S01[1].SZMI26_05C_W0624_M300TS_V1_0_16m_En_Vn.B0M.bin Loaded
COM13 selected
Device: Autodetect
Checking data, wait...
Action: Flash write
Write: Firmware
Skip: Customization
Skip: Language Pack
Skip: Eeprom
Boot...
Press and HOLD Power button now !
Connecting, wait...
Initializing[6226:8A02]...
Release Power button now !
Boot Done
Initialize...
detecting chip[00] in region[00]...
flash: 01227E22202200
flash: 29EA0000000000
flash: Amd PL127J D 16Mb
number of flash chip/regions detected: 01/01
Initialize Done
Set baud...
slowest
Set baud Done
Check space...
operation mode: Fast detection mode
device parameters autodetection in progress..
detecting chip[00] in region[00]...
flash: 01227E22202200
flash: 29EA0000000000
flash: Amd PL127J D 16Mb
number of flash chip/regions detected: 01/01
total flash region size: 01000000
detecting eeprom area in 1 chip(s)...
flash: 01227E22202200
flash: 29EA0000000000
checking area[00000000]: 00000000-00FFFFFF...
eeprom found near: 00E00000
detecting eeprom size...
eeprom size: 00200000
eeprom chip: 00
eeprom area detected[00000000]: 00E00000-00FFFFFF
detect device identification, method #1...
detection phase #1...
protocol version: 0004
2nd [enhanced] (or higher) generation model detected
Attention: read full flash backup before any action !
warning: probably identification data damaged, power-on problem possible
Probably identification data damaged,
id: [B3419E62]
version: [SZMI26_05C_RUIXINGXING_PCB01_GPRS_MT6226_S01.SZMI2 6_05C_W0624_M300TS_V1_0.BIN_2B1D50C5]
Do you want to write RPL file (RPL file must be in current folder) ?
RPL file declined by user
Probably identification data damaged,
Do you want to create ASK file ?
error: ASK file can't be created due to communication fault,
repeat "Detailed information" operation
identification detection finished
device-id: B3419E62
version sw1: SZMI26_05C_RUIXINGXING_PCB01_GPRS_MT6226_S01.SZMI2 6_05C_W0624_M300TS_V1_0.BIN
version sw2: SZMI26_05C_W0624_M300TS_V1.0
detection phase #3...
error: no any expected answer
error: unexpected termination/freez: 00000000
detect device parameters finished
error: no any expected answer
file saved: backup_system_log_B3419E62_[SZMI26_05C_RUIXINGXING_PCB01_GPRS_MT6226_S01.SZMI2 6_05C_W0624_M300TS_V1_0.BIN]_2B1D50C5_20070508-145725.B0X.bin
Finished, time used: 367 sec
Remove/Install battery now !
-----------------------------------------

[InfinitySupport]

error: ASK file can't be created due to communication fault, repeat "Detailed information" operation


Also you must check phone hardware !

[ticoichip]

What do think, when phone only had problem with camera.
I try to flash another flash but not success. Now i reflash with original flash---> phone dead. Is that hardware? 2phones has same problem.

[InfinitySupport]

Sometimes even 3 phones (not only 2) can be with the same hardware problem.

btw, did you tried to use this good idea: use other flash files

[ticoichip]

Thanks, I'm trying. Nice supporter !