PDA

View Full Version : How To Unlock LG u900 11b - 11e - 11g with Furious Gold !!

Dengel
05-10-2007, 15:32
Hi my friends.
This is the answer to all that asked me "How to unlock Lg u900 version 11b - 11e - 11g with Furious Gold".

Let's Start



Attach Furious Gold and Original USB CABLE without phone connected
Press 2 + 5 and then attach cable to phone without release
Now let's start out QFG module, that can be found in support area ( you need to get LAST VERSION, not the installer one)]
Com port is yet selected, then click on jobs and select Full Flash
Remove the point on "Enable Warning Box"
http://i55.photobucket.com/albums/g137/PmBForum/u900%2011g%20gold/fullandenable.png
Now Click on Do Jobs and Select Unlock Patched Flash (available in support area)
http://i55.photobucket.com/albums/g137/PmBForum/u900%2011g%20gold/selectunlock.png
If all is ok, flashing is started. You're Seeing Emercengy mode. Is only to remove errors and blinking problems.
http://i55.photobucket.com/albums/g137/PmBForum/u900%2011g%20gold/start.png
When finished, phone will be resetted and display will become Yellow
Now Media will be written...Let's Wait
http://i55.photobucket.com/albums/g137/PmBForum/u900%2011g%20gold/mediafile.png
At the end, phone will be rebooted and reset, will wait 130 seconds...Finished
http://i55.photobucket.com/albums/g137/PmBForum/u900%2011g%20gold/resetand130sec.png
Now we have to select "NV Write" in jobs
http://i55.photobucket.com/albums/g137/PmBForum/u900%2011g%20gold/nvmwrite.png
Select correct NV file ( that can be found on support area )
http://i55.photobucket.com/albums/g137/PmBForum/u900%2011g%20gold/selectnv.png
let's "Do Jobs"
Wait finish and...
http://i55.photobucket.com/albums/g137/PmBForum/u900%2011g%20gold/writingnv.png
Congratulations, You have unlocked you LG u900 any version !
http://i55.photobucket.com/albums/g137/PmBForum/u900%2011g%20gold/finished.png



Thanks Furious TEAM !!!

Original Topic (http://pmbforum.forumcommunity.net/?t=6570233&st=0#entry66473852)
.:hack3r2k:.
05-10-2007, 15:44
Thank you Dengel for doing this great tutorial !

Br;)
lord of rings
05-10-2007, 15:52
good work many thanks
fabio84
05-10-2007, 15:53
furious the best :-D; thx dangel...
Dengel
05-10-2007, 15:56
Hope can be really helpful :)
Naz66
05-10-2007, 16:23
really great job man....this fourm is alive by such people like u,whose aim is helping us.
thanks man really nice job.:)
atulgsm
05-10-2007, 16:32
of of the great suppotting team, we r happy with fg gold.............
tolski
05-10-2007, 16:33
thanks for the tutorial..also for reference.
Dengel
05-10-2007, 16:50
really great job man....this fourm is alive by such people like u,whose aim is helping us.
thanks man really nice job.:)



really thanks to all :D

seems that was helpful like i want :)

Have a good work with your F-gold :D
mamirza
05-10-2007, 17:19
Hope can be really helpful :)

Hello:

Excellent Job and very helpful !

BR.:)
upgrader
05-10-2007, 17:52
nice post very informartive!!!
SGHGSM 3
05-10-2007, 20:00
Thank you Dengel ......................
damabib
05-10-2007, 20:44
nice and good tutorial here...
zolla
05-10-2007, 21:02
10x 4 tutorial
wbr
Dengel
05-11-2007, 04:07
Hello:

Excellent Job and very helpful !

nice post very informartive!!!

Thank you Dengel ......................

nice and good tutorial here...

10x 4 tutorial
wbr



Thanks to all, my friends...and thanks to them that appreciate in private messages, too :D
sheikhje
05-11-2007, 07:09
good job.
great work.
regards
::.::RAMJAN::.::
05-11-2007, 08:01
thanks buddy good work ............!
arimob
05-11-2007, 10:22
So using this method will U900 workk in 32KB sim or still not

thanks
Ari mob
Naz66
05-11-2007, 13:33
HELLO DEJAL HOPE U WILL BE FINE,I NEED UR HELP IF U CAN.
ONE CUSTOMER BRING PHONE U900. PHONE IS FROM ITLAY 3G NETWORK.
I PUT 3G UK SIM CARD IT DOSNT WORK OBIVIOUSLY FONE NEED UNLOCKING.
I FOLOWED UR INSTRUCTION AS U SAID.I USED COM USB CABLE AND FLASH THE FONE WHITH U9OO_V11_UNLOCK_IT.sex FILE. FONE GOT FLASHED FULLY, TOOK NEARLY 45 MINUTES.AFTER THAT I USED NVM WRITE OPTION WITH U900_NV.nv2 file.FOLLOWING IS THE LOG.

Searching phone ...

MODEL : U900
COMPILED DATE : May 10 2006 16:23:00
RELEASE DATE : May 10 2006 12:00:00
FIRMWARE INFO : U900-MSM6250A-V10b-MAY-10-2006-H3G-LatIT
IMEI : 3593*****78466-2
BLUETOOTH ADDR : 00 12 56 37 F6 1B

MEMORY ID : 0098:0079
MEMORY NAME : toshiba_ty9000ac10aobg
MEMORY SIZE : 105MB

U900 NV FILE VERSION 2 WITH 416 RECORDS.
WRITING NV ...
RESETTING ...
Time needed - 00:00:09

AFTER ALL THIS PROCIDURE I PUT 3G SIM CARD FROM UK....:confused: FONE IS STILL SAYING....USIM bloccata.

BUT THANKS *** FONE IS STILL ALIVE:D

CAN U PLZ HELP THAT WAT IM DOING WRONG AND WAT SHALL I DO TO UNLOCK THIS FONE.

THANKS FOR ALL UR HELP:)
Gozha
05-11-2007, 13:40
man i am interested... i can clone sim cards.. if i buy new sim cards with 128kbit.. and copy to it a sim card with 32kb.. will u900 see this cloned card?
Naz66
05-11-2007, 22:43
DENJAL I STILL GOT THE CUSTOMER FONE CAN U PLZ TELL WAT SHALL I DO IF FONE DONT GET UNLOCK PLZ AS SOON AS POSIBLE IF U GOT ANY SOLUTION.

:confused:
electrolandgsm
05-11-2007, 23:34
DENJAL I STILL GOT THE CUSTOMER FONE CAN U PLZ TELL WAT SHALL I DO IF FONE DONT GET UNLOCK PLZ AS SOON AS POSIBLE IF U GOT ANY SOLUTION.

:confused:

press sos call key, phone will restart and unlocked
electrolandgsm
05-11-2007, 23:35
@DENGEL thx man for this nice tutorial.
really apreciated:)
faisi
05-12-2007, 11:49
Hi my friends.
This is the answer to all that asked me "How to unlock Lg u900 version 11b - 11e - 11g with Furious Gold".

Let's Start



Attach Furious Gold and Original USB CABLE without phone connected
Press 2 + 5 and then attach cable to phone without release
Now let's start out QFG module, that can be found in support area ( you need to get LAST VERSION, not the installer one)]
Com port is yet selected, then click on jobs and select Full Flash
Remove the point on "Enable Warning Box"
http://i55.photobucket.com/albums/g137/PmBForum/u900%2011g%20gold/fullandenable.png
Now Click on Do Jobs and Select Unlock Patched Flash (available in support area)
http://i55.photobucket.com/albums/g137/PmBForum/u900%2011g%20gold/selectunlock.png
If all is ok, flashing is started. You're Seeing Emercengy mode. Is only to remove errors and blinking problems.
http://i55.photobucket.com/albums/g137/PmBForum/u900%2011g%20gold/start.png
When finished, phone will be resetted and display will become Yellow
Now Media will be written...Let's Wait
http://i55.photobucket.com/albums/g137/PmBForum/u900%2011g%20gold/mediafile.png
At the end, phone will be rebooted and reset, will wait 130 seconds...Finished
http://i55.photobucket.com/albums/g137/PmBForum/u900%2011g%20gold/resetand130sec.png
Now we have to select "NV Write" in jobs
http://i55.photobucket.com/albums/g137/PmBForum/u900%2011g%20gold/nvmwrite.png
Select correct NV file ( that can be found on support area )
http://i55.photobucket.com/albums/g137/PmBForum/u900%2011g%20gold/selectnv.png
let's "Do Jobs"
Wait finish and...
http://i55.photobucket.com/albums/g137/PmBForum/u900%2011g%20gold/writingnv.png
Congratulations, You have unlocked you LG u900 any version !
http://i55.photobucket.com/albums/g137/PmBForum/u900%2011g%20gold/finished.png




Original Topic (http://pmbforum.forumcommunity.net/?t=6570233&st=0#entry66473852)

i do the same procedure as u describe....but it give me error like this..(sorry i recognized my mistake...)

Br.
Faisal.
Opal Mobiles.
Naz66
05-12-2007, 12:14
press sos call key, phone will restart and unlocked

THANKS FOR UR RESPONCE @ELECTROLANDGSM,,,,AS U SAID I PRESS SOS KEY WITH 3G UK SIM CARD PHONE GOT RESTART AND ITS WORKED WITH THE THREE NETWORK,BEFORE IT WASNT WORKING,ITS GOOD ACHIVEMNENT:)

BUT WHEN I PUT 2G NETWROK SIMCARD LIKE VODAFONE,TMOBILE,VIRGEN etc PHONE SHOWING.....INSERT USIMCARD....EVEN THE SIMCARD WAS IN PHONE,,,,,,,,ITS MEANS PHONE IS ONLY COMPATIBLE TO WORK WITH 3G SIMCARD.M I RIGHT:confused:
Dengel
05-12-2007, 14:41
Faisi, remove cable and battery.
Then attach phone without battery to cable, holding 2+5.

Retry.

All must work :)
ChuckyIT
05-12-2007, 14:42
Pandemonio if you have a working u900 you can read nv and put in the unlocked phone ;)
bamogil
05-12-2007, 18:04
please help me. I just got a U900 version 11 to unlock. before unlock process I put a 64k simcard in the phone and it displayed "usim blocatta"(sim locked I suppose). Now after unlock process describe by Dengel when I put the 64k simcard it asks me to insert simcard. what I understand in this is that after unlock phone can not support 64k simcards anymore. am I wrong?
Pandemonio100
05-12-2007, 18:41
please help me. I just got a U900 version 11 to unlock. before unlock process I put a 64k simcard in the phone and it displayed "usim blocatta"(sim locked I suppose). Now after unlock process describe by Dengel when I put the 64k simcard it asks me to insert simcard. what I understand in this is that after unlock phone can not support 64k simcards anymore. am I wrong?

This phone don't support 64k sim card only 128k.;)
bamogil
05-12-2007, 18:53
This phone don't support 64k sim card only 128k.;)
but why is iut that before unlock process when I put sim card the phone say usim blacatta? it means that the phone in that case can see the simcard but only that it is locked. now after unlock process it say "insert simcard" with 64k sim. it means that unlock process has change something...
electrolandgsm
05-13-2007, 22:21
but why is iut that before unlock process when I put sim card the phone say usim blacatta? it means that the phone in that case can see the simcard but only that it is locked. now after unlock process it say "insert simcard" with 64k sim. it means that unlock process has change something...

i don't think this is true..maybe u messed up sims:)
some 64k sims..it may happen to be detected by phone(rare case) but phone will restart..no signal..hang up and many other problems.
so use only with 128k sim card..follow DENGEL instructions..and all will be OK
ras
05-13-2007, 22:55
This is really nice tutoria, many thanks mate
Unlocker AL
05-15-2007, 14:00
tested today by me
work with SIM operator TIM 128 KB
magixian
05-16-2007, 01:21
After Unlock, This Phone Never Recorgnize Nigerian Sim (32k I Think)

But It Recorgnizes Some Of Other Country Sim Card!
Why?
Dengel
05-16-2007, 09:49
as you can read in all the forum, u900 does support only 128k :)

try to find one of them, and phone will work !
das100
05-23-2007, 12:53
pls somebody post nv file,its not in support
UnlockBR
05-25-2007, 04:53
Hi,

I unlocked an U900 v11 using FG. Great job.... BUT after inserting 128k sim-card (2G) phone asks to insert code.

How do I fix that??

BR,

UnlockBR
shahzad-0004
05-25-2007, 04:59
good work many thanks
Dengel
05-25-2007, 08:04
pls somebody post nv file,its not in support

nv is in support area ;)

Hi,

I unlocked an U900 v11 using FG. Great job.... BUT after inserting 128k sim-card (2G) phone asks to insert code.

How do I fix that??

BR,

UnlockBR

my friend, you have only to insert sim-card, and press SOS
UnlockBR
05-26-2007, 03:50
my friend, you have only to insert sim-card, and press SOS

Tried that. Didn't helped :( Same msg was displayed again :(
mr.Dubai
05-26-2007, 05:10
Hi my friends.
This is the answer to all that asked me "How to unlock Lg u890 v

with Furious Gold
Dengel
05-26-2007, 07:40
Tried that. Didn't helped :( Same msg was displayed again :(

Remember that you have to insert 128k sim-card ;)
hackerbd
05-26-2007, 18:36
Thats a grate news for us.Thanks furious team.


BR
!!bdlshohel!!
UnlockBR
05-29-2007, 03:34
Remember that you have to insert 128k sim-card ;)

Of course I did that.

Phone shows 3 Logo, then goes to:

Inserire scheda USIM

Then I press SOS (menu right key)

Phone shows 3 logo again and returns to msg:

Inserire scheda USIM

BTW,

Already checked and phone was sucessfully downgraded to V10b. But temporary unlock is not working :(
.:hack3r2k:.
05-29-2007, 21:49
Of course I did that.

Phone shows 3 Logo, then goes to:

Inserire scheda USIM

Then I press SOS (menu right key)

Phone shows 3 logo again and returns to msg:

Inserire scheda USIM

BTW,

Already checked and phone was sucessfully downgraded to V10b. But temporary unlock is not working :(


This happens because maybe u tried this with usb cable conected or charger !

Br;)
UnlockBR
05-30-2007, 05:40
Hummmm, and what cable should I use? I really used original USB cable... as stated at 1st post of this thread (http://forum.gsmhosting.com/vbb/showpost.php?p=2430839&postcount=1)
.:hack3r2k:.
05-30-2007, 15:39
Hummmm, and what cable should I use? I really used original USB cable... as stated at 1st post of this thread (http://forum.gsmhosting.com/vbb/showpost.php?p=2430839&postcount=1)


You understood totally wrong. I told you not to have USB or Charger conecetd while u press SOS key.

Br;)
Dirdan
05-30-2007, 16:13
I have tried to unlock a U900v11, but for two times, the soft write the time needed but the flah not is complete, and i must restart the flsh... Why?

I use Furious II with upgrade dongle to gold.

I don't think that is normal!

Thanks
Dirdan
05-30-2007, 16:14
I have tried to unlock a U900v11, but for two times, the soft write the time needed but the flah not is complete, and i must restart the flsh... Why?

I use Furious II with upgrade dongle to gold.

I don't think that is normal!

Thanks
Dengel
05-30-2007, 20:34
I have tried to unlock a U900v11, but for two times, the soft write the time needed but the flah not is complete, and i must restart the flsh... Why?

I use Furious II with upgrade dongle to gold.

I don't think that is normal!

Thanks


For that i suggest to flash phone in emergency mode.

- Press 2+5+ Power on
- connect phone
- and then flash ;)
.:hack3r2k:.
05-30-2007, 21:04
For that i suggest to flash phone in emergency mode.

- Press 2+5+ Power on
- connect phone
- and then flash ;)

And also be sure u use one of latest versions of QFG !

Br;)
UnlockBR
05-30-2007, 22:05
You understood totally wrong. I told you not to have USB or Charger conecetd while u press SOS key.

Br;)

Ok, got you... but neither charger or USB were connected :(
Dirdan
05-30-2007, 22:16
I have flashed the phone only in emergency mode. About the version, i have installed FSG_15.04.2007.rar, is OK or i must use another version?

Thanks
.:hack3r2k:.
05-30-2007, 22:35
I have flashed the phone only in emergency mode. About the version, i have installed FSG_15.04.2007.rar, is OK or i must use another version?

Thanks

Is ok if flashing process completed ok. All latest exes are in BETA folder.

Br;)
Dirdan
05-31-2007, 00:29
NO the flashing, for two times, not is been completed, but i reflash and result OK.

IN the Beta Folder what is the last working version?

BR
UnlockBR
05-31-2007, 00:54
Tried again. Same result....

Sim card is 100% 128k 2G from TIM Brazil.
UnlockBR
06-01-2007, 02:50
So... maybe a problem with sim card brand (as I tried some others from TIM Brazil and none worked) :( :(
.:hack3r2k:.
06-01-2007, 09:20
So... maybe a problem with sim card brand (as I tried some others from TIM Brazil and none worked) :( :(


Definetly.

Br)
maryajne
06-05-2007, 06:19
can i ask have to change language english lg u8500
colombia gsm
06-08-2007, 13:57
please need U900_NV.nv2 file.
please upload it here for me please
electrolandgsm
06-08-2007, 15:29
please need U900_NV.nv2 file.
please upload it here for me please
u have in suport area in nv files section.
you can also use SEARCH function from site
wilpinto
06-15-2007, 00:50
hello I finish aser lg u900 but after releasing it to not lle me no chip some solution
wilpinto
06-15-2007, 01:45
its not read sim 128 after unlock inserire scheda usim
nishaon
06-15-2007, 13:13
Please make any way to use 64k sim..........
mrfixit
06-21-2007, 22:50
did with u900_v11_unlock_it.sex but now only 3 come on and off.
.:hack3r2k:.
06-22-2007, 06:54
did with u900_v11_unlock_it.sex but now only 3 come on and off.


reflash in emergency mode and check battery level.

Br;)
nishaon
06-22-2007, 20:02
did with u900_v11_unlock_it.sex but now only 3 come on and off.


Same thing happens with USTPRO II
electrolandgsm
06-26-2007, 19:08
just reflash phone in engineering mode..and will be all ok
rubeltelecom
06-27-2007, 12:41
Searching phone ...

MODEL : U900

INIT FLASHING ENGINE ... OK;
NV READ SKIPPED;
UPLOADING STARTED;
WORKING IN EMERGENCY MODE;
Error ... !
Time needed - 00:00:04

I try to 2+5 em mode but whats problem
hassan1975
07-07-2007, 02:58
for MR .:hack3r2k:.

u990 can owrk with sim 64k ?
or only 128k
hassan1975
07-07-2007, 03:01
sorry i mean u900





thx
rajan nishchal
07-14-2007, 14:19
Sucessfully Unlocked U900 v11g

But Only 128k Sim Works Airtel.
lokdid123
07-15-2007, 06:46
can i unloch LG U300 and U890 without furious gold tell me plz
electrolandgsm
07-15-2007, 22:19
can i unloch LG U300 and U890 without furious gold tell me plz

YES..go to someone who own f-gold
or...you could use other sections from forum...for finding out.
here is only f-gold support section:)
cykada
08-08-2007, 13:42
Thank you very much Dengel. Your solution bring to life mine damaged U900 :)
mrfixit
08-08-2007, 13:56
Quote:
Originally Posted by mrfixit
did with u900_v11_unlock_it.sex but now only 3 come on and off.


reflash in emergency mode and check battery level.

BrBr;)

thank you that fixed my u900 but as posted before only128k sim.
lypen17
08-15-2007, 09:41
greate tutorial/...........
ahmertelecom
08-16-2007, 14:49
how can i check u900 its 11 version or 10 version plz give ma code to check this help me thnx in advance
.:hack3r2k:.
08-16-2007, 15:14
how can i check u900 its 11 version or 10 version plz give ma code to check this help me thnx in advance


Use READ NV function of furious and ull see in soft log the fw info. Anyway you can unlock both version using furious.

Br;)
TOZE
09-01-2007, 15:03
still no solution to use with 64k sim card??
.:hack3r2k:.
09-01-2007, 15:05
still no solution to use with 64k sim card??


If there would be one then would be announced with BIG LETTERS. SO NO.

Br;)