The New Tornado Infra Station In Market

[akshay]

here the new infra station product launch by ........ tornado team...... erveryone knows abt.... tornadod team... so no need to say abt..... this product..... its rocking... i use it..... its perfect...... equipment..... chk it out.... its web....... nothing to say more abt... it... .simply good product... with good rate......... product of mr... narry.....


http://www.tornadoinfra.com/eng/class/photos

[Fre3 Crack3r]

Hello

Look interested . . any info about price and reseller ??

Regards . . :D

[Trion]

I'd like to hear some user testimonials. Also am curious about the price, build and service.

[ARC]

looking for it's price

[SALIMUS]

very nice look interesting
many sagem will be unlocked lol
br

[Raskal]

here the new infra station product launch by ........ tornado team...... erveryone knows abt.... tornadod team... so no need to say abt..... this product..... its rocking... i use it..... its perfect...... equipment..... chk it out.... its web....... nothing to say more abt... it... .simply good product... with good rate......... product of mr... narry.....


http://www.tornadoinfra.com/eng/class/photos

Tornado team should first replace all damaged UB boxes sold to crying customers. Customers are not guilty if tornado team aka naresh versace is using cheap cheap parts makeing hardware.

[Syed]

good results i tested on some PCB and was good to see the way it worked.

WBR
Syed

[Gobi]

The TornadoInfrared station is working like a charm in my service.

No more connectors dammaged like from hotair station. It looks like the handheld IRDA unit from Tornado will replace the hotairstations in time.


regards,
Gobi
www.GSM-TOOL.com

[Hams]

A True Revolution.
Wth the New Lead free Pcb we have no other option but use a Infra Machine.
We need a Machine :
- which does the job without damaging the Pcb.
- reasonably priced
- not complicated
- easy to handle

Vistors to Dubai - for a live Demo you can visit our showroom.

[unlocker35]

great machine.Every service centre needs one of these things.Cant see why theres always stupid arguments on here.Let customers make up there mind and mines been made up!

[**RAJESH**]

Hii
ITS REMOVE GLUED CPU?????


Where To Buy In India.....??????????????//

[GsmMunna]

Hii
ITS REMOVE GLUED CPU?????


Where To Buy In India.....??????????????//


Yes It can Easily Remove Glued Cpu, Uem, Flex Cable's, Battry Connecter's Sim Jack's Without Any Damage Of Pcb..

Tested Many Time On Cpu's, Uem & Flash Ic's (Glued)

1. Nokia
2. Samsung
3. Motorola
4. Sony Erission

Also Tested Sucessfully On

6600 Uem

http://i80.photobucket.com/albums/j190/GSMMUNNA/6600Uem.jpg



3230 Board Flex After Removing

http://i80.photobucket.com/albums/j190/GSMMUNNA/3230Flex.jpg


3230 Board Flex Sucessfuly Fixed An Working


http://i80.photobucket.com/albums/j190/GSMMUNNA/3230Flex-1.jpg


To Buy You May Contact MobileClinic (Delhi)

For Detail's Visit Link

http://www.tornadoinfra.com/eng/class/officials-distributors


Regard's
Munna Bhai

[mobileclinic]

@all Indian user,
You can contact us for live demo in our New Delhi office.No need to say for its feture,you can see with your eyes.
BR.
Ashok Garg
+91-9811158555

[Triminity]

where can i find live demo in india ?

Br.

[GsmMunna]

where can i find live demo in india ?

Br.

Contact:-

MobileClinic
Ashok Garg
+91-9811158555

[calvinpower]

where to buy it in china

[calvinpower]

where to buy it in china?

[Tele-way]

it can also see the demo from youtube:
http://www.youtube.com/watch?v=ECT5HJR2ml4
http://www.youtube.com/watch?v=CeYbQX8Q-ao
http://www.youtube.com/watch?v=3H_JY4YE1Yg

[Tele-way]

where to buy it in china?

we are one of the resellers providing that machine:
http://www.one-stop-china.com/pdetail.jsp?productid=12632

[John(LMT)]

Where can i get a SMD Station Aoyue 909?
If Somebody knows please tellme!!!


Thanks.-:confused:

[coolmax]

any resellers the uk?....looks great.
please contact me.
I WANT IT!!:) :) :)

[fonefun]

CoolMax

Contact us on monday

[shaikhboy]

Great , Great , Great . This thing is a miracle and a big revolution has started with this at level 3 and 4 hardware repairs . Works excellent .
thats all i can say .
For demo or preview , you are most invited at my office in Mumbai , India . contact me on 09819551144 .

Mobile Dot Com ,
Manish Market , shop no:24 ,
Mumbai-01

[THE ZEUS]

Hello,

looks very cool.

Can I buy it in Germany? What the price in Euro?

ZEUS

[the new]

hi
bye posting all this
what u expect to gain and why are u alway interested in what business i do i guess is jeolousy
what right do u have to say i am analphabet
infact i would like to ask what is u education level expect post bla in forum
are u even a enginner:D
as far as ub is concerned we are replacing the bad boxes threw resellers
also if people feel the ub box is bad the sales will go down and they will loose the market is simple
but all this what diffrence does it make to me:D
i am not author for UB box
not even producer:D also the money got bye selling ub boxes does not go to my pocket
goes to ub team
any way u will never understand:D
narry:D

small correction bye=good bye :D and by(=With the use or help of)
I think you love bye bye than by :D :D
pliz d.ont think for bad thing( I am too not soo good in english but) ,I constated that you love this world "bye "

[::.imeimate.::]

does any1 knows the price


BR

[darie cruz]

glad here to have one.........it's really nice

thanks to narry's & his team

br

[GsmMunna]

does any1 knows the price


BR

Please Find Your Nearest Distributor

http://www.tornadoinfra.com/eng/class/officials-distributors


Regard's
Munna Bhai

[::.imeimate.::]

tell us the price ppl


BR

[vin79]

yeah me too need the price of this product :))

[Don_R]

A True Revolution.
Wth the New Lead free Pcb we have no other option but use a Infra Machine.
We need a Machine :
- which does the job without damaging the Pcb.
- reasonably priced
- not complicated
- easy to handle

Vistors to Dubai - for a live Demo you can visit our showroom.Hi there can you tell how much does it cost?

[Don_R]

A True Revolution.
Wth the New Lead free Pcb we have no other option but use a Infra Machine.
We need a Machine :
- which does the job without damaging the Pcb.
- reasonably priced
- not complicated
- easy to handle

Vistors to Dubai - for a live Demo you can visit our showroom.Hi can u tell me how much does it cost

[GsmMunna]

Tested On 3250 Sim ic Exelent Result's In 7 Sec Ic Removed


http://i80.photobucket.com/albums/j190/GSMMUNNA/3250sm-1.jpg


Video Of Samsung 220

www.gsmmunna.com/R-220.zip

Note Use DVD Player


Regard's
Munna Bhai

[alex12345]

yes, this tool is cool and lower price. tested by me also ;)

with best regards
alex

[vin79]

hi all of u guys. can u tell us what the price, why so hard to tell about the price. n where do u get it, any reseler on indonesia or singapore or malaysia also can.

[mccm]

then the jovy system dead .no handheld stupid machine

so many ppl asking for price now US$200 / .

can get cheaper if buy in bulk

[[Rod]]

where did u saw?

regards

[tornadoinfra]

then the jovy system dead .no handheld stupid machine

so many ppl asking for price now US$200 / .

can get cheaper if buy in bulk
HI
donot spread lyies this machine is not sold for 200 usd
end user price is 550 usd
also we caN OFFER U JOY MACHINE also both machines is diffrent
regards
tornadoinfra:D

[mccm]

sorry ,i means no selling here .For my own use only at this point .

jovy is slow ,this handheld is fast no regards ,quality wise is jovy offcourse .

I push away ppl wanted to buy from me ,but i refer them to the official site ,550us .

Again i have no right to sell here ,sorry from my statement .

dont pm me ,thank you .

[nanu]

does any1 knows the price

[Gobi]

Price is arround 550$ about, depending on reseller .

regards,
Gobi

[pinoy_gsm]

does any1 knows the price


$550 and buy it from an official distributor.

[Raskal]

How about warranty and replacement of this machine in case it goes damaged?

This machine is more HEAVY and this machine cost more in manufacturing than a UB box, and we see the UB box exist many hunderts of them wich is refused to be replaced by manufacturer.

Manufacturer is same, this is why i make comparation with UB box. Only need read the UB forum and know what i mean:

http://www.gsmhosting.com/vbb/forumdisplay.php?f=305

I don't konw how u guys are handling it, but for us, our customers, in case they have damaged box within 6 months we replace box free of charge, we also pay the shipment for the replacement, also our resellers do same.

[Raskal]

@Narry, Gobi

no answer about warranty and warranty handling in case the infrared station damage?

[amar181]

very very thankx brother

[hakumatsuo]

hello,friends,


we can offer the repair tools for you. The brand of repair tools we have is AOYUE series: AOYUE 968; AOYUE 808;AOYUE738....

we can offer you the best price and soupport.

We are dedicated to offering you exclusive, innovative and quality poducts at affordable prices. Whatever products or services you are looking for, Taurus Electronics strive to offer it.

If you are interested, pls do not hesitate to contact us:).

you can visit us at: www.gsm-taurus.com

msn/email ID: gsm_taurus@hotmail.com
gsm-taurus@hotmail.com

Best regards
Ran

[mccm]

hello,friends,


we can offer the repair tools for you. The brand of repair tools we have is AOYUE series: AOYUE 968; AOYUE 808;AOYUE738....

we can offer you the best price and soupport.

We are dedicated to offering you exclusive, innovative and quality poducts at affordable prices. Whatever products or services you are looking for, Taurus Electronics strive to offer it.

If you are interested, pls do not hesitate to contact us:).

you can visit us at: www.gsm-taurus.com

msn/email ID: gsm_taurus@hotmail.com
gsm-taurus@hotmail.com

Best regards
Ran


whats wrong with your site cannot open ???

[hakumatsuo]

whats wrong with your site cannot open ???

hi,mccm,

just try again. i can open it just now;)

if you still can not open it, pls contact me.

emai me: gsm-taurus@hotmail.com
gsm_taurus@hotmail.com

[LOSKERLY]

very nice station....what's the price and spec

[GsmMunna]

very nice station....what's the price and spec

Price is $550 USD An For Spacification's You May visit http://www.tornadoinfra.com

For More Detail's You May Contact to Your Nearest Officials Distributor


Regard's
Munna Bhai

[mccm]

i think loskerly are asking for the Aoyue models .

yah ,site working ,thank you .

[hakumatsuo]

very nice station....what's the price and spec

hi,LOSKERLY,

Can you tell me the model you want?

you can also email me: gsm_taurus@hotmail.com
gsm-taurus@hotmail.com

regards
ran

[GsmMunna]

@hakumatsuo

This Is not A Sell Section Also Read thred Name....


Regard's
Munna Bhai

[monsterpassword]

what about the guarantee? Raskal amde a point here. u buy a machine for 550 usd, u pay for shipping and if it fuc x in 2 months ! what do you do? u buy another one?
what about spare parts? what about the infra device. can it be bought separately afterward. i heard it get burn after a while .......
so where is the guarantee.

[Gobi]

The warranty is AT THE RESELLER. Nor me or anybody will run arround the world to fix the resellerproblems, if the resellers don't do theyr jobs.

I will, LIKE USUAL, solve any warranty problems with the boxes THAT I AM SELLING, and FOR MY OWN CUSTOMERS, and so should any reseller do.

So, GENERALLY, BEFORE buying ANY PRODUCT from ANY RESELLER, ask him what warranty he offers for the product, and then buy or don't buy.

At the end it is the customers choice in a free market...

regards,
Gobi

P.S.
About the heater element - you will be surprised how long his life is.
ONLY - AS DESCRIBED IN THE MANUAL: it must NOT be used at full power for long time, since it will do his job verry well at about middle of the scala.
If it will be used at full power for longer time, or if you will drop it on the floor, or hit it - then of course it will get dammaged.

[jak2812]

hi
does anybody knows if there is reseller in spain?, i aks this because i have send am email to the reseller in spain but not answer.
thanks

[Raskal]

@hakumatsuo

This Is not A Sell Section Also Read thred Name....


Regard's
Munna Bhai

and this is same rule for you, too

THIS IS NOT A SALES SECTION

http://www.gsmhosting.com/vbb/showpost.php?p=2483128&postcount=54

[Raskal]

i think loskerly are asking for the Aoyue models .

yah ,site working ,thank you .

you must excuse GSMMUNA, he can not read and write... with other words, he is an analphabet

[gail18]

Nice INFRA station..but i watch the 3gp demo2..when removing the CPU it damage the other parts of the board.... i think you have to be fast in removing glued cpu or UEMs...see this one :)

http://www.youtube.com/watch?v=b3ioM6_laBk
http://www.tornadoinfra.com/eng/videos/tornado-infra-station-demo-video-01

[GsmMunna]

and this is same rule for you, too

THIS IS NOT A SALES SECTION

http://www.gsmhosting.com/vbb/showpost.php?p=2483128&postcount=54


All world Can See The Temp Of Your Mind



HeHeHe hahahaha.... lol

[yashtel]

reseller in india?????????????????????????????????

[tornadoinfra]

reseller in india?????????????????????????????????
hi
email me at tornadoinfra@gmail.com
for more infos
tornadoinfra:)

[CHAPRAN]

it for 25000 ..............................rs

[GsmMunna]

reseller in india?????????????????????????????????

Check Here

http://www.tornadoinfra.com/eng/class/officials-distributors


Regard's
Munna Bhai

[hakumatsuo]

hello,friends,


we can offer the repair tools for you. The brand of repair tools we have is AOYUE series: AOYUE 968; AOYUE 808;AOYUE738....

we can offer you the best price and soupport.

We are dedicated to offering you exclusive, innovative and quality poducts at affordable prices. Whatever products or services you are looking for, Taurus Electronics strive to offer it.

If you are interested, pls do not hesitate to contact us:).

you can visit us at: www.gsm-taurus.com

msn/email ID: gsm_taurus@hotmail.com

Best regards
Ran

[pinoy_gsm]

How about warranty and replacement of this machine in case it goes damaged?

This machine is more HEAVY and this machine cost more in manufacturing than a UB box, and we see the UB box exist many hunderts of them wich is refused to be replaced by manufacturer.

Manufacturer is same, this is why i make comparation with UB box. Only need read the UB forum and know what i mean:

http://www.gsmhosting.com/vbb/forumdisplay.php?f=305

I don't konw how u guys are handling it, but for us, our customers, in case they have damaged box within 6 months we replace box free of charge, we also pay the shipment for the replacement, also our resellers do same.


How many machines have you bought and tested already? DO they fail you? If failed, whats the failure?


I can see that you are so mad on this product, can you tell us whats wrong with it?

You may use it for a while and take a look at its performance.

Then if it fails you, come back here and tell us whats really wrong with it.


br,

[mccm]

so this handheld at 299 dollars ,good price .

But without preheating base ,i think its not very useful after all .

[Gobi]

It is same usefull like a Hotair station that don't melt your plastic connectors, don't **** your components away from the pcb and heat only the tracks on the flexes, without burning the rest.

You can even remoove metal shields with it by raising the power-temperature level from the Potentiometer - but be carefull to go back to normal power- temperature when returning to normal PCB work -- else it can even heat up to 900 degree Celsius the PCB and tost it :).
Also you can use the Tip on the heater - to do more delicate work, like working on flexes.
At the end the Tool offers everything needed to do the job, but the repairer still need to have the necessary skills for the job - since hardware don't have 1 button press-solutions.


Usefull enaugh for you ?

regards,
Gobi

[mccm]

yo ,i knew that ,

any video to show this junior yet powerful in lifting leadfree bga ic ?

please take some video to showcase ,thank you .

[Gobi]

http://www.tornadoinfra.com/eng/videos

You see there videos, most made by our beta-testers and customers - some using also the preheater, and some only the handheld.

regards,
Gobi

[mccm]

ok ,video 4 n 5 are infrared without preheat .For sure a longer time to remove or replace .

Question you should advice ppl put on protective gears while using your products .

It will cause skill cell n eyeball to breakup ,you know what I means ?

Here I attention user ,use gloves n goggles .

[Gobi]

According to the Infra -heater producer there is no need for googles - so far you don't stay looking alltime into the heater.
A laser pointer for the keychain is more dangerous for the eyes as this element, if you compare ...

The reflection comming back from the pcb is not dangerous.

As sayed - the operator should not look directly into the heating element for longer time and not stay with his eyes few centimeter away from the element.

But if somebody wants google - then any plastic-lens googles are ok - no need for any special material.

regards,
Gobi

[jodge]

@Gobi
how much it of the infrabulb and the pre-heater lifetime, approximately and how much his replacement costs?

thank you

[Gobi]

The infrared heater is ceramic, and not a bulb.
The lifetime, according to the manufacturer is over 3000 hours.
This means in a normal usage - about more then 1 year !!!

The replacement cost at this moment is still high, since the heater is custom-made, but will decrease fast in parallel with the rising nr of units in production.

regards,
Gobi

[GsmMunna]

wowwwwwwwwwwwww my tornado infra station is free now .... i repair lots of phones..... without damaj chips .... i cover my machin cost...

Good...!! Like You Many Other Using Tornado Infra An Solving Problam of those Handset's Which Were Not Repairable Before.


Many Handset Of Motorola An Samsung Handset Repair Sucessfully... Before It Was Not Possible To Remove Glue Ic's An Led Free Ic's...(Due To Board Damage) But After Using Tornado Infra This Become Very Easy...!!

1. Removing Uem Appox 40 Sec Without Any Damage...!!
2. Samsung Flex Connecter's In 10 Sec Without Damage...!!
3. Removing Any Board Connecter 15 Sec Without Damage..!!
4. Removing Sim Ic Display ic Keypad ic Crystel's Led Free P.A (P.f)..!!
5. Removing Display With Flex 30 Sec...!
6. Tested On Many CDMA Handset....!! Nokia Samsung Kyosera L.G

Most Important You Can Re-Use All Connecter Again....!!! Tornado Infra Have Unbelievable Result's.....!!! All I Can Say It's Need Of Every Hardware Person. Most Impo It's handHeld So Do Not wait Contact Your Nearest Distributer For Live Demo & Price



Big Thanks To Tornado Infra Team For Making It Easy To Use...!!!


Regards
Munna Bhai

[elbachir]

any resseler in france or belguim ?

[candra_yus]

btw are there any reseller in indonesia??

[eeusebiu]

any resseler in france or belguim ?

in sales section you can find our promotion for:
- Infra Red HANDHELD Station
- Furious Gold Special Bling Bling Edition

1 day delivery in Europe by Ups

look here (http://www.gsmhosting.com/vbb/showthread.php?t=412838)

good luck ,

[electrosoft]

any resseler in tunisia or libya

[candra_yus]

are there any reseller in indonesia or in singapore?or are there any reseller that can deal with cash on delivery??

[ren77]

are there any reseller in indonesia or in singapore?or are there any reseller that can deal with cash on delivery??

For reseller info, visit http://www.tornadoinfra.com/eng/class/officials-distributors


Or you can get it from us direct.

[vin79]

i wan to buy one. but all distributor to far from my country. any singapore reseller.

@ren77
Where is ur location?, how do i contact u.

[ren77]

i wan to buy one. but all distributor to far from my country. any singapore reseller.

@ren77
Where is ur location?, how do i contact u.


Here:

http://forum.gsmhosting.com/vbb/showthread.php?t=414123

[neo_49]

Good...!! Like You Many Other Using Tornado Infra An Solving Problam of those Handset's Which Were Not Repairable Before.


Many Handset Of Motorola An Samsung Handset Repair Sucessfully... Before It Was Not Possible To Remove Glue Ic's An Led Free Ic's...(Due To Board Damage) But After Using Tornado Infra This Become Very Easy...!!

1. Removing Uem Appox 40 Sec Without Any Damage...!!
2. Samsung Flex Connecter's In 10 Sec Without Damage...!!
3. Removing Any Board Connecter 15 Sec Without Damage..!!
4. Removing Sim Ic Display ic Keypad ic Crystel's Led Free P.A (P.f)..!!
5. Removing Display With Flex 30 Sec...!
6. Tested On Many CDMA Handset....!! Nokia Samsung Kyosera L.G

Most Important You Can Re-Use All Connecter Again....!!! Tornado Infra Have Unbelievable Result's.....!!! All I Can Say It's Need Of Every Hardware Person. Most Impo It's handHeld So Do Not wait Contact Your Nearest Distributer For Live Demo & Price



Big Thanks To Tornado Infra Team For Making It Easy To Use...!!!


Regards
Munna Bhai
PLEASE GUIDE US ABOUT TEMPERATURE SETING U USED FOR ALL THIS WORK
REGARDS

[neo_49]

Akshay
Thanx But What Tesmerature U Use For Handheld For Removing Hard Solder

[candra_yus]

after i check the website, i can't find any reseller in singapore or in indonesia, so disappointed!

[Bloedman]

Hi,

how about CE approvel?

cya

[Bloedman]

Why CE approval???
http://en.wikipedia.org/wiki/CE_mark
Getting cancer isn´t so funny.
If this product is so safe, there is no problem to do a CE approval.

Maybe in your country it´s also ok to change fuel rods in a nuclear plant.

[HONEY]

Why CE approval???
http://en.wikipedia.org/wiki/CE_mark
Getting cancer isn´t so funny.
If this product is so safe, there is no problem to do a CE approval.

Maybe in your country it´s also ok to change fuel rods in a nuclear plant.

Did u read "This infrared heating element contains the CE marking.
The CE marking indicates conformity with the relevant European safety directive(s). " in official site ? the direct link is here (http://www.tornadoinfra.com/eng/specifications)



BR.

[HONEY]

@candra_yus

if u need u can deal with ... HONEY... really good support .... or send payment theough paypal.
i m done business with him from last 6 years.... no prob...........



GSM: +919811615306
ICQ: 201958478
E-mail: honeymidha@hotmail.com
Web Page: www.mobilemasters.org

Thanks for this :D



BR.

[strangerboy]

Europe u guys can contact us:

www.bus-n-tech.biz

we have real stock of tornado infra

[Gobi]

Hi,

how about CE approvel?

cya

At least the most "Sensible" elements like the Infra Heater and the INSULATION materials are made by the European leaders in theyr fields and have CE certification.

For the rest, remains the PCB and the Case of the power unit made from ABS material. Well, if you need CE certification for that also ...

However, For anybody interested in doing his job at 299$, EMS delivery included, we have PHYSICAL Stock INSIDE the EU at www.gsm-tool.com.

regards,
Gobi

[ren77]

Infrared technology is used on some luxurious saunas, so why can cause skin cancer? Just dont expose it too much to your skin at longer time and that would not be a problem.

[Bloedman]

Did u read "This infrared heating element contains the CE marking.
The CE marking indicates conformity with the relevant European safety directive(s). " in official site ? the direct link is here (http://www.tornadoinfra.com/eng/specifications)



BR.

Sorry, didn´t see it.
Everthing fine now.
I think i will buy now this tool.

cya

[Bloedman]

everyproduct no need ce approval..... everyone can understand... that....

tell me which hot air station .. ur using..... ? is it ce approval..... ?

How old are you?12?
It´s a big difference if you work with a simple heater or IRDA!
Hope you now that UV waves cause cancer!

[wal_ph]

great works mr.francis
keep it up:D

[falak]

its fantastic tool to work with




br falak

[ngvuanh]

I have a question.
I do repair a lot of ultralight laptops. Motherboard has many plastic connectors or headers that can be harmed with hot air. So my question is with IR, all plastic parts will be harmed during reflow BGA chips, or if I can remove some connectors or header with this IR that it could not with hot air station.
Thanks

[ren77]

Yes, team is making good and cheaper solution for gsm community and more...

We have also a preaheater specially made for bigger pcb's or motherboards. Pictures attached.



If need more info and purchase about the products, all of you can always contact us.


regards.

ren


ym: renatoinso
msn: renatoinso@hotmail.com
icq: 92443695
sonork: 100.112355

[Raskal]

Why CE approval???
http://en.wikipedia.org/wiki/CE_mark
Getting cancer isn´t so funny.
If this product is so safe, there is no problem to do a CE approval.

Maybe in your country it´s also ok to change fuel rods in a nuclear plant.

You will not get answer from Narry or Gobi about such "strange" questions like warranty, exchange policy or any eu compliance. This kind of questions are simply ignored.

Ask them how to send them money, and they will reply you immediately. Of course if you plug in this tool in 220v and it will explode you can not suit any one.

Best is to ask from this 2 cheaters before buy the product, a certificate of provenience from a LEGAL COMPANY, since if any accident happens, they will say simply "it is not me" i have nothing to do with this, because as you see NONE OF THE BOTH CHEATERS are selling goods in this forum under real company name, this happens to avoid paying taxes and to avoid to take responsablity in case of any accident happens, because they know 220v is little bit more than 5v from usb port

@bloedmann
hoever, if you want to buy this tool, buy it from one of their reseller INSIDE EU since if anything happens (warranty problem, accident, etc...) keep the proove of purchase (official sales invoice and make sure this is existent company) you can suit the reseller since it is resellers duty to take care all this when he start sell this tool to public. U know the rules are very strickt and and u can not loose in this case. You can read below regarding this.

http://www.dihk.de/index.html?/inhalt/informationen/news/schwerpunkte/innovationsjahr/artikelserie/cekennzeichnung.html

[Raskal]

Did u read "This infrared heating element contains the CE marking.
The CE marking indicates conformity with the relevant European safety directive(s). " in official site ? the direct link is here (http://www.tornadoinfra.com/eng/specifications)



BR.

the whole tool must have a CE certification not only the parts used in the product

[ren77]

The tornado infra station is doing great on its production and sales. It is a wonderful equipment that had helped a lot of technicians in their daily work in the shops. Removing glued IC's and lead free IC's is easier using this. Flex removing and installing is like charm, no more ****n small parts, no more sign of burns like most hot air stations do.

Since June 2006 all PCB’s made all over the world are already lead free that has a high melting temperature. So there's a great need for all gsm servicing to use Infra station for their work. By using hot air to repair these PCB's can damage its tracks and damage the PCB.

Tornado infra station is a good investment for all serious GSM servicing centers. With its price and efficiency, you'll increase your income and productivity.

[liliantoram]

Since June 2006 all PCB’s made all over the world are already lead free that has a high melting temperature. So there's a great need for all gsm servicing to use Infra station for their work. By using hot air to repair these PCB's can damage its tracks and damage the PCB.

.

Please don't say information without knowledge about LEAD FREE !!!!

The problem in Lead Free PCB not to reach high tempreature ,can't you reach 300 C with normal hot air ??

The problem in lead free is to control the tempreature of the PCB not to reach melting point fast and not to reach it slow also because of oxidation .

so to work with Lead Free PCB your system must have control unit with tempreature sensor and pre-heater all connected together (closed loop technology )

you can check ERSA , Metcal, Jovy ,Zevac to improve your knowledge .

[ren77]

Please don't say information without knowledge about LEAD FREE !!!!

The problem in Lead Free PCB not to reach high tempreature ,can't you reach 300 C with normal hot air ??

The problem in lead free is to control the tempreature of the PCB not to reach melting point fast and not to reach it slow also because of oxidation .

so to work with Lead Free PCB your system must have control unit with tempreature sensor and pre-heater all connected together (closed loop technology )

you can check ERSA , Metcal, Jovy ,Zevac to improve your knowledge .

Tornado infra station(full set), includes a preheater and a thermometer on its package, which is a must when working with lead free PCB's. You can always monitor the temperature of the PCB. For more information you can always visit the official products website = http://www.tornadoinfra.com/


And btw, ERSA, Metcal, Jovy, Zevac etc.. are good equipments but they have great, great, great prices too!

Our product has a price and efficiency that will increase your income and productivity with lesser investments. And easier to use too. :)

Thanks for your good informations.


regards,

ren

[Raskal]

Please don't say information without knowledge about LEAD FREE !!!!

The problem in Lead Free PCB not to reach high tempreature ,can't you reach 300 C with normal hot air ??

The problem in lead free is to control the tempreature of the PCB not to reach melting point fast and not to reach it slow also because of oxidation .

so to work with Lead Free PCB your system must have control unit with tempreature sensor and pre-heater all connected together (closed loop technology )

you can check ERSA , Metcal, Jovy ,Zevac to improve your knowledge .

LOL :D :D :D

man i know this narry and his gang (gobi can co) since long time, he is just an analphabet, ignore this, of course he have no ideea about any electronics, neither about any saefty rules or regulations regarding selling those kind of products.

B.R.
Raskal

[Gobi]

Some people need to take an ERSA rework station for 5000-6000 Euro, some other a Jovy for 2000 Euro, and again other people take a Tornado Indra Station or in many cases the 250$ TORNADO INFRA HANDHELD and DO THE SAME JOB !!! At the end it depends all on the SKILLS OF THE PERSON THAT WORK with the rework station.
So, everybody can use whatever suits him most, and what he can afford

The Infrared element is CE certified, and that is most important for health and safety, of course. Whoever need also CE certification for the cables operating at low voltage and the power supply, can wait or buy the expensive stuff...

Over 1000 pieces was sold out, and 99% of the customers are happy with the device and MAKING MONEY.

regards,
Gobi

p.s.
Of course porky raskal, the gsm bacylus imbecilus will bark you half the forum full now because TORNADO Infra station is a Narry team product, and with his education in Catering- and - food technology he is the expert ....for packing the food into a Lufthansa airplane :D:D:D
Non technical photo removed



He is so honest, by closing support for Jaf boxes for the endcustomers, just because he is for the 1000-th time in some personal war with the one or other resellers...

[Raskal]

The Infrared element is CE certified, and that is most important for health and safety, of course. Whoever need also CE certification for the cables operating at low voltage and the power supply, can wait or buy the expensive stuff...

Over 1000 pieces was sold out, and 99% of the customers are happy with ..

If you are so honest and you trust this product so much and you guarantee for its passed safety regulations, you will have no problems for units sold into EU to give a invoice with your company name based in EU, right?

i will ask some one from EU to buy one from your company based in Romania (also eu now) asking all this papers, let's see what he will get.

and about your team knowlege about Lead Free technology, there are also other users remarked that you are selling something and you don't know what you sell REN77=Narry http://forum.gsmhosting.com/vbb/showpost.php?p=2574487&postcount=127

[ren77]

and about your team knowlege about Lead Free technology, there are also other users remarked that you are selling something and you don't know what you sell REN77=Narry http://forum.gsmhosting.com/vbb/showpost.php?p=2574487&postcount=127



I guess he is just comparing his newly bought Jovy System with Tornado infra. Its it's known that it's much different. It only depends on the user's technical knowledge.
http://forum.gsmhosting.com/vbb/showpost.php?p=2573961&postcount=13

Tornado Infra is good, and those Jovy System, ERSA, Metcal, Zevac ETC.. are better but again with great, great prices.

That's all.


br,
ren

[Gobi]

As expected - barking and barking porky running arround. Everybody duck ...
Hihihih - porky, porky think he knowe all, but as usual he talks bulls.hit.
With his education level (qualified catering agent), it is at least nothing surprising.
This is why he allways run against walls and allways bark arround like the village idiot. Dream on porky!
But it is not up to me to mape porky-school ... :D


About the Tornado Infra station -- In matter safety; it is more secure and safe then the Chinese Hotairstations used by 99% of the service people.
The only part in the TornadoInfra that was needed to check carefully, because it is a radiant element - was the Infrared element, and ThAT WAS TESTED AND HAS CE CERTIFICATION.

Here again TECHINCAL PHOTO of what part of the TORNADO INFRA UNIT HAS CE CERTIFICATION :

Non technical photo posted

Getting CE certification for the complete tool, take some time and will be done too.

regards,
Gobi

[liliantoram]

@ Ren77

I apologize if i made trouble for you . I was just corecting your technical information .

sorry again

[ren77]

@ Ren77

I apologize if i made trouble for you . I was just corecting your technical information .

sorry again

It's no big deal for me, I know who I am, what I can do and what I can't. No hard feelings, we are here to discuss. We live in a free world... :)

And BTW, i think my info is right that with hotair, you will have problems on lead free PCB's (without using pre heater). When working with lead free, PCB should be preheated to around 100 degree C and then use hotair to rework on it. You can work it with hot air but infra is better. Tornado infra has preheater on it. And has better heating/melting of lead than hotair.


Quote:
Originally Posted by ren77 View Post

Since June 2006 all PCB’s made all over the world are already lead free that has a high melting temperature. So there's a great need for all gsm servicing to use Infra station for their work. By using hot air to repair these PCB's can damage its tracks and damage the PCB.



regards,

ren

[huzsolt]

I think the sollution is quite simple. It is a cheap device, and it is working good (especially with flex bands, it is much better than hot air), so it is a device that alot of us can afford. If you are interested, or do you like other users feedback, buy it, you won't regret it. If you are satisfied with your hot air station, than don't buy it. It is so simple. Every new product has pro's and contra's, but it isn't a nuclear reactor for G0D's sake, it doesn't has harmfull E's , and if you don't put it in your mouth, nothing wrong will happen.
If you are afraid from radiations than don't use mobile phone's in the first place, amer-indian smoke will be better for you.

[stanner_austin]

@Gobi
u shuld respect member of the forum when ur talking..
raskal is member and product supportor..

talking like on tecnical forum not good for u stuts.
and agains to rules of this forum.

[Gobi]

However barking and fighting --> untill now over 1000 Tornado Infra Stations sold and the big big majority of the users are happy with it and doing theyr job.

The Handheld Unit is a 250$ Tool that is helping profesional electronic service people a lot. (but don't get confused - because a good tool can not transform a wannabee into a profesional).
The Preheater is also verry helpfull, even it cost extra.
The presented tool is a more then 4 - 8 times cheaper alternative to the expensive automated Infra stations in the market. The choice is allways yours !!!

It is tested by many people who do HARDWARE repairs for a living, and anybody can check here how it is working:

http://www.tornadoinfra.com/eng/videos

regards,
Gobi

P.S.
Just for info: Me personally give 6 month warranty for ALL devices i am selling personally. My OWN customers you have not seen complaining about warranty or support issues... Somehow "interesting" that only the COMPETITION is complaining (barking actually) ....hihihihi

[chiragp]

@supporter

i am the user of torndo ir in india and also reseller of mnay products infra is good product launched but as a user want to say that the magnet in some model r so weak that can not handel the circuit ,till know i have seen 3 or 4 types of diff size and quality of ir on my hand and also some glass break up complain

though it is not easy to get the glass and magnet n market of india also there should stand on pre heater to make stable circuit on pre heater

also the handle black module innner black coil name [narry] is becoming white after some use

ONCE AGAIN I SAY THAT TORNADO INFRA IS MUST IN EVERY REPAIRING CENTER PLS MAKE SOME PRICE PROTECTION

[GsmMunna]

@supporter

i am the user of torndo ir in india and also reseller of mnay products infra is good product launched but as a user want to say that the magnet in some model r so weak that can not handel the circuit ,till know i have seen 3 or 4 types of diff size and quality of ir on my hand and also some glass break up complain

though it is not easy to get the glass and magnet n market of india also there should stand on pre heater to make stable circuit on pre heater

also the handle black module innner black coil name [narry] is becoming white after some use

ONCE AGAIN I SAY THAT TORNADO INFRA IS MUST IN EVERY REPAIRING CENTER PLS MAKE SOME PRICE PROTECTION

We Naver Face Such Problam With Tornado Ir..! Can You tell Us Those Model's On Which Problam Have Bin Seen So We Can Check..!!


Regards
Munna Bhai

[techgsm]

Where can i get a SMD Station Aoyue 909?
If Somebody knows please tellme!!!


Thanks.-:confused:

Hi

We have it - contact me via email I`ll give you price, meanwhile You can see also other SMD station on our site.

P.S. We also have tornado infra station in stock.

Best regards
Jakub

[Gobi]

Yes, THE TOOL ROCKS !!!

http://www.gsm-tool.com/infra.gif

regards,
Gobi

[strangerboy]

Is it possible to post here a manual for it???

[strangerboy]

already have :D many tks friend....

[mdoscorpio]

Is there any reseller of that item here in the Philippines?

[ren77]

Is there any reseller of that item here in the Philippines?
You can buy from the listed official distributors from the official site:
http://tornadoinfra.com/eng/class/officials-distributors

Or you can contact me:

regards,

ren

ym: renatoinso
icq: 92443695
www.NarryGsm.com (http://www.narrygsm.com/index.php)

[Bloedman]

You will not get answer from Narry or Gobi about such "strange" questions like warranty, exchange policy or any eu compliance. This kind of questions are simply ignored.

Ask them how to send them money, and they will reply you immediately. Of course if you plug in this tool in 220v and it will explode you can not suit any one.

Best is to ask from this 2 cheaters before buy the product, a certificate of provenience from a LEGAL COMPANY, since if any accident happens, they will say simply "it is not me" i have nothing to do with this, because as you see NONE OF THE BOTH CHEATERS are selling goods in this forum under real company name, this happens to avoid paying taxes and to avoid to take responsablity in case of any accident happens, because they know 220v is little bit more than 5v from usb port

@bloedmann
hoever, if you want to buy this tool, buy it from one of their reseller INSIDE EU since if anything happens (warranty problem, accident, etc...) keep the proove of purchase (official sales invoice and make sure this is existent company) you can suit the reseller since it is resellers duty to take care all this when he start sell this tool to public. U know the rules are very strickt and and u can not loose in this case. You can read below regarding this.

http://www.dihk.de/index.html?/inhalt/informationen/news/schwerpunkte/innovationsjahr/artikelserie/cekennzeichnung.html

Thanks,

a very good advise to buy it from a EU Resseler with a registered company name.
I think will buy it in next couple of months, after first machines are "tested".

regards

[Raskal]

Thanks,

a very good advise to buy it from a EU Resseler with a registered company name.
I think will buy it in next couple of months, after first machines are "tested".

regards

if you can and want to do me one favour, you can order plz 2 pices, try to order from gobi or his best friend koksi, gobi has a company in romania but he is hiding it, koksi have also company, he have no reason to hide nothing since he is working legal, than send one pieces for me to my brother in Offenbach or direct to VDE in Offienbach, i am really curious about this "instrument" ...

I am willing to pay both tools, and the shipping costs. Contact me by PM if you agree.

B.R.,
Raskal

p.s. vde adress http://www.vde-institut.com/vde_pi/

[Raskal]

You can buy from the listed official distributors from the official site:
http://tornadoinfra.com/eng/class/officials-distributors

Or you can contact me:

regards,

ren

ym: renatoinso
icq: 92443695
www.NarryGsm.com (http://www.NarryGsm.com)

mr narry,

can i unlock a N73 with the tornado microscope? YES or NO?

awaiting answers from "experts"

[ren77]

mr narry,

can i unlock a N73 with the tornado microscope? YES or NO?

awaiting answers from "experts"


Good day Mr. Raskal,

First of all i am not narry, i'm ren from the Phillipines working here. If you care to give us the testpoint picture for the N73 and we will test it here. It's a new solution so we should test before we say Yes or No.




regards,
ren

[ren77]

mr narry,

can i unlock a N73 with the tornado microscope? YES or NO?

awaiting answers from "experts"



This microscope is used to view the testpoint pins to be able to connect the tp pins properly. This is not the software that is used to unlock BB5. I hope it is clear to you and you understand now.


regards,
ren

[Raskal]

This microscope is used to view the testpoint pins to be able to connect the tp pins properly. This is not the software that is used to unlock BB5. I hope it is clear to you and you understand now.


regards,
ren

Hello Mr. Narry,

my question was wrong composed, sorry. I will ask again:

It is possible to see the N73 test points with the Tornado microscope?

B.R,
Raskal

[Raskal]

Good day Mr. Raskal,

First of all i am not narry, i'm ren from the Phillipines working here.

ren

Yes sure, and my name is Huszolt from Tirgu Muresh and i am Romanian...



This microscope is used to view the testpoint pins to be able to connect the tp pins properly. This is not the software that is used to unlock BB5.




if this is a new solution, how can Gobi and You assume that you can use this tool all BB5 phones?
i have one ideea. To be honest i know you and your team from 1996 so i must say open i do not belive you. Actualy is a fair deal and in case this works, you just proove the good quality of this tool.

I have fair suggestion; I offer you 500 usd cash here in HK, if you can use this tornado microscope unlocking 1 pcs N73, in case you loose, you just need to pay me 5 usd.

Deal? Sir, boss?

B.R.,
Razvan din Budapesta

[Gobi]

Loool, and there are still BB5 phones where the TP information is not avaiable now and more BB5 to come in future....
N73 TP you have also seen TODAY for the first time ...:D:D:D
http://www.gsmhosting.com/vbb/showpost.php?p=2584315&postcount=7
The information was also for few MTBOX Pro users avaiable before - since MTBOXPRO by GRIFFIN TEAM, was the FIRST ONE to release support for this model, actually.

So, it is new TP avaiable and will be tested. It the microscope is helpfull with this ok, else i will for sure add the correct info to the product description after testing, and IF NECESSARY looking for an alternative ... This we do however with or without barking and circus here :D
And future BB5 TP info will come at its time too - and same everytime we will have to test it WHEN IT WILL BE AVAIABLE ...

So much bla bla for nothing ...
Seems some people have no other ocupation then barking ...

[Gobi]

But BACK TO THE THREAD TOPIC - ABOUT TORNADO INFRA STATION :

http://www.gsm-tool.com/infra.gif

New stock will be avaiable in 1-2 days again ;)

regards,
Gobi

[sDinesh]

Does this Infra has PCB temperature measuring display to measure the temp on PCB please advice.

Br

[sDinesh]

@sdinesh

u got one thermometer with package.... for measuring pcb.. temp....

Which type of Thermometer I would like to hear from supporters.

Br

[Gobi]

Hi

The thermometer included now in the package, is comming as free gift, and is intended to help the Tornado Infra user to check what temperature he apply on the PCB.

It is a thermometer using K type thermocouple.
Temp range -50 C to 1300 C

and looks like in the atached picture

regards,
Gobi

[Gobi]

And, as promised TORNADO TP MICROSCOPE and the N73 TP Test results:

http://www.gsm-tool.com/N73.jpg

http://www.gsm-tool.com/tornadoN73.jpg

Conclusion:YES, with TORNADO TP MICROSCOPE the N73 Testpoint is good visible and can be used for Unlocking this phone in addition to one of the BB5 Unlocking boxes.
Of course some skills and a good staddy hand is also needed for the job too :D

And so, here the modified TORNADO TP MICROSCOPE product description:

http://www.gsm-tool.com/poster2.jpg



regards,
Gobi

[snsoftkiller]

@Gobi
About your microscope, you need also to have advanced skills in software using.
After you buy this tool, you need to download last version of AMCAP (just use google), set pin filter to resolution 800x600 to get a good picture cause zoom function is not working anymore (tested and confirmed). After uncheck all auto settings, try manual settings for picture, open lens with the key, then activate 60hz if your video card allow you. Dont foget to save you settings cause you will need to reaload anytime when you restart software.
I did my 1st 6280 after doing all this settings.

[Gobi]

For me it was working directly with the software and drivers that was comming with the microscope. If i would have experienced the same problems like you, then i could have searched for the solution also.

However, i am happy that it is now working also for you, because that is most important...

regards,
Gobi

P.S. Your description will help us in future to solve similar problems with customers. Thx for the feedback ;)

[Raskal]

For me it was working directly with the software and drivers that was comming with the microscope. If i would have experienced the same problems like you, then i could have searched for the solution also.

However, i am happy that it is now working also for you, because that is most important...

regards,
Gobi

P.S. Your description will help us in future to solve similar problems with customers. Thx for the feedback ;)

so you see how stupid you are? you had just to use google and some of your time and your problem with your customers would be solved, but instead u insulting me and others.... As you see this man just helped you out from your probelm and here in this post u just accusing him when he asking for help.

http://www.gsmhosting.com/vbb/showpost.php?p=2580014&postcount=18

[techgsm]

Hi

Using this stereoscopic microscope you will gain the same results:
http://j.techgsm.com/pi/1153141994microskop%20150.gif

It has 40x zoom. It`s tested here in Poland with BB5 unlocking and reparing other phones...

I dont say that your one is not good - but it`s nothing special instead it has same name as infrared station which is very popular in GSM lastly ;)

Br
Jakub

[huzsolt]

Yes sure, and my name is Huszolt from Tirgu Muresh and i am Romanian...


Razvan din Budapesta

Analphabet from Budapest :D

[Gobi]

so you see how stupid you are? you had just to use google and some of your time and your problem with your customers would be solved, but instead u insulting me and others.... As you see this man just helped you out from your probelm and here in this post u just accusing him when he asking for help.

http://www.gsmhosting.com/vbb/showpost.php?p=2580014&postcount=18

Hey Idi.ot ; you can send thru mr Ali the 500$ to Narry ... so much about N73 TP that cannot be viewed ... boah ... looser !!!

I am curious, now that the customer (actually not even my own direct customer) has found out what was in his particular case the problem, and could use the microscope --> what other "problem" you will invent to the TORNADO DEVICES ...

boah, ... such a looser ...
ratatule

[neo_49]

Dear Sir What Is The Temprature For Prehiter When Removing 3230 Flex & What Time Its Take To Remove The Flex.
Regards

[ren77]

DEAR SIR WHAT IS THE TEMPRATURE FOR PREHITER WHEN REMOVING 3230 FLEX & WHAT TIME ITS TAKE TO REMOVE THE FLEX.
REGARDS

The maximum temperature of the preheater is around 100 degrees C, it cannot do alone in removing the flex. You need the handheld station to heat and remove it.The temperature varies to what kind of pcb you have, depends on its melting point. For safety set first the temperature of the handheld to a lower one, else increase it but not too much.


regards,

ren

[ren77]

@Gobi
About your microscope, you need also to have advanced skills in software using.
After you buy this tool, you need to download last version of AMCAP (just use google), set pin filter to resolution 800x600 to get a good picture cause zoom function is not working anymore (tested and confirmed). After uncheck all auto settings, try manual settings for picture, open lens with the key, then activate 60hz if your video card allow you. Dont foget to save you settings cause you will need to reaload anytime when you restart software.
I did my 1st 6280 after doing all this settings.


Thanks for the information.

As we selling this kind of tools expects that all who do BB5 testpoint unlocking has enough knowledge on both software and hardware. This box worths around €2000 - €6000, plus the price of each phone it unlocks which is normally high end models. It has big risks, so a qualified pro unlocker is highly recommended to do the task.

Happy unlocking.:)



regards,

ren

[candra_yus]

hi, i just purchase tornado infra handheld from one of reseller in indonesia, i've question to ask mr gobi or mr ren:
1. how much exactly temp that it work to pick up connector, glued ic?coz last time i pick up the batt connector, the tornado damage the connector(e.x. in dct4+ board like 1110,1600,etc)
2. i only purchase the handheld without the preheater, does it mean so much for the result?can i combine it with lukey preheater?
thx for the answer


P.S. the temp that i use is 30.65!

[candra_yus]

hi, i just purchase tornado infra handheld from one of reseller in indonesia, i've question to ask mr gobi or mr ren:
1. how much exactly temp that it work to pick up connector, glued ic?coz last time i pick up the batt connector, the tornado damage the connector(e.x. in dct4+ board like 1110,1600,etc)
2. i only purchase the handheld without the preheater, does it mean so much for the result?can i combine it with lukey preheater?
thx for the answer


P.S. the temp that i use is 30.65!

[ren77]

hi, i just purchase tornado infra handheld from one of reseller in indonesia, i've question to ask mr gobi or mr ren:
1. how much exactly temp that it work to pick up connector, glued ic?coz last time i pick up the batt connector, the tornado damage the connector(e.x. in dct4+ board like 1110,1600,etc)

2. i only purchase the handheld without the preheater, does it mean so much for the result?can i combine it with lukey preheater?
thx for the answer


P.S. the temp that i use is 30.65!



@candra_yus

For the battery connector, you should put some good flux to decrease the melting point, and set the temperature to around 30 on your handheld station. Too much temperature can burn the pcb, so start from low first.

For glued ic and lead free PCB's, a preheater is a must. This is to preheat the pcb first with temperature around 100 degrees C before you rework using the the handheld station.

More practice on how to use it can achieve better results.

For more technical info's you can contact or pm me here.



regards,
ren

[neo_49]

[quote=ren77;2599603]@candra_yus

For the battery connector, you should put some good flux to decrease the melting point, and set the temperature to around 30 on your handheld station. Too much temperature can burn the pcb, so start from low first.

For glued ic and lead free PCB's, a preheater is a must. This is to preheat the pcb first with temperature around 100 degrees C before you rework using the the handheld station.

More practice on how to use it can achieve better results.

For more technical info's you can contact or pm me here

WHAT KIND OF FLUX WE NEED TO USE (WHICH BRAND IS GOOD FOR MOBILE REPAIR)
REGARDS

[ren77]

[quote=ren77;2599603]@candra_yus

For the battery connector, you should put some good flux to decrease the melting point, and set the temperature to around 30 on your handheld station. Too much temperature can burn the pcb, so start from low first.

For glued ic and lead free PCB's, a preheater is a must. This is to preheat the pcb first with temperature around 100 degrees C before you rework using the the handheld station.

More practice on how to use it can achieve better results.

For more technical info's you can contact or pm me here

WHAT KIND OF FLUX WE NEED TO USE (WHICH BRAND IS GOOD FOR MOBILE REPAIR)
REGARDS


There is a flux (lead free) included in the package specially made for tornado infra for better results.

Picture:
http://www.narrygsm.com/ren77/tornadoflux.jpg


regards,
ren

[ren77]

today,i'm so dissapointed!my tornado handheld suddenly cannot working, the heat element doesnt heat anymore!i received the tornado today and not in 24 hour already not working!where is the quality control????

Please contact me regarding your handheld station. I need more info's about that.


regards,

ren

[THE ANT]

Thanks For
AshOk Garg Ji May Be This Weak I,ll Come In Yrs Office
I Want Buy This Divce
I Bought Universal Box

I Am Sanjay Bhatt
From Rishikesh

[Gobi]

.......... sorry - internet problem ...

[ekel]

Hi dear ;)

I will help u to solve ur problem, chat by Yahoo ok? or send me back to me, as I am ur reseller (in Indonesia) :D Thanks

br
anang
scpgsm

thank`s to mr. anang resseler from indonesia:D
i`ve already try with this infra. first very dificult to use it. after some experiments, it`s very easy & usefull. i`m haven't buy preheater yet(maybe it can be more perfect if we use preheater), but i can pull out 6600 uem and rap3g n70 so easily :D. but it takes time & skill. i`m trying to makes some manual in indonesian. as i promise to mr anang, for helping other people in indonesia.but 'cause my wife just give a birth to my son,maybe i need more time to accomplished it.i'm sorry before :D

[Small_boy]

hi SCPGSM, I'm interested to get the station from you! I've sent you email please read... thanks

[rajiv007]

today,i'm so dissapointed!my tornado handheld suddenly cannot working, the heat element doesnt heat anymore!i received the tornado today and not in 24 hour already not working!where is the quality control????


i also had the same problem 3 days before that time that time i remove yellow cable from control box and refit again now its ok

i also think they need to take care of quality

[ren77]

i also had the same problem 3 days before that time that time i remove yellow cable from control box and refit again now its ok

i also think they need to take care of quality



That problem was already addressed, only crimp and problem resolved.


regards,

ren

[scpgsm]

hi SCPGSM, I'm interested to get the station from you! I've sent you email please read... thanks

ok got it, already replied. Thanks:D

[tanh]

it good or not good for you

[Small_boy]

Can you guy manufacture a stand for your infra-red station as well? A simple one that can hold the infrared and a small clamp below to hold the PCB. I think that would be great! :)

[Gobi]

We are glad to announce by this that the Tornado Infra station, both the Handheld as also the Preheater (complete station) has sucessfully passed the CE Certification tests, and are confirmed to fullfit this standard requirements.

http://forum.gsmhosting.com/vbb/showthread.php?p=2632370#post2632370


regards,
Gobi

[akshay]

hi everyone.. .... tool still rocking .......... i m surprised..... whn...... i take dead N73 for repair... i m just just trying .. to open .. upper body .. that time one sound come out from phone ... speaker.. pls....pls...... pls....... dnt repair me with HOT AIR STATION.. i dnt like hot air stations... pls... pls.... :o :o :o

i like only TORNADO INFRA STATION... .cause i m loving it... ;) ;) ;)

means.. i wnt to say to all my friends.. this phone or comming .... technology....not repair with hot air stations.... really....

ONLY WITH TORNADO INFRA STAION.............. :cool: :cool: :cool:

if anyone dnt belive thn... take demo at nearest reseller anywhere in world...casue all most everywhere u got this fantastic... tool ... in world...

bye,,,, again.. my n95 buzz me .. hey @kki come on.....start reapir... me with tornado...infra...... :cool:

[rehan hayder]

im very happy with tornado infra station. its work perfect if u know how to play with it.

[Tapanhaz]

I am From North East region Of India and like to see the live demo. what is the nearby place i can see it

[akshay]

@Tapanhaz

there is no need to watch video.... just take it .. & u feel it whts... u miss... from a long time ago.. .

[HONEY]

I am From North East region Of India and like to see the live demo. what is the nearby place i can see it

If you can come to new delhi, can show you its working ...



BR.

[kidgz]

anothe great gadgets to use
thanks very much...