N76 usb flashing ok!

[DAVI_1]

Searching for phone...Detected P-KEY: 9000****
P-key nokia module version 01.00
Init usb communication...
Found
Reading battery value...4087 mV
Init usb flashing...
Reading flashid... CMT: 003000EC, APE: 00000000
Verifing ADL communication... Status byte 7
Using 006.044.048
Elf2flash 07.02.000 RAW loader...
Patching RAW boot step1...
Patching RAW boot step2...
Patching RAW boot step3...
Sending RAW Loader...
....................Loader Sent!
Stage 2 starting..............Phone prepared OK!
Waiting for the phone to boot...
Phone is in flash mode...
CMT blocks: 557, APE blocks: 0
Erasing cmt...
Processing C:\Program Files\Nokia\Phoenix\Products\RM-135\RM135_10.0.035_prd.C00...
Erasing cmt zone 00040000 - 00082FFF ...
Erasing cmt zone 00083400 - 0087FFFF ...
Erasing cmt zone 00B80000 - 07B3FFFF ...

Processing C:\Program Files\Nokia\Phoenix\Products\RM-135\RM135_10.0.035_prd.V14...
Erasing cmt zone 03D80000 - 0537FFFF ...
Processing C:\Program Files\Nokia\Phoenix\Products\RM-135\RM135_10.0.035_022_000_U01_uda.fpsx...
Erasing cmt zone 05380000 - 07B3FFFF ...
Writing cmt...
Processing C:\Program Files\Nokia\Phoenix\Products\RM-135\RM135_10.0.035_prd.C00...
Sending CMT HASH for ADA
Sending CMT HASH for KEYS
Sending CMT HASH for PRIMAPP
Sending CMT HASH for RAP3NAND
Sending CMT HASH for PASUBTOC
cmt->PAPUB_CERTIFICATE_DATA_BB5 block detected
cmt->PAPUB_CERTIFICATE_DATA_BB5 block detected
cmt->PAPUB_CERTIFICATE_DATA_BB5 block detected, sending...
cmt->PAPUB keys already sent...
Sending CMT HASH for SOS*UPDAPP
Sending CMT HASH for SOS*DSP0
Sending CMT HASH for SOS*ISASW
Sending CMT HASH for SOS*CORE
Sending CMT HASH for SOS+ROFS
Processing C:\Program Files\Nokia\Phoenix\Products\RM-135\RM135_10.0.035_prd.V14...
Sending CMT HASH for SOS+ROFX
Processing C:\Program Files\Nokia\Phoenix\Products\RM-135\RM135_10.0.035_022_000_U01_uda.fpsx...
Rebooting...
Pooling phone...
MCUSW: V 06wk41v21.4
05-04-07
RM-135
(c) Nokia
APESW: 10.0.035
VariantSW: 10.0.03514.01
Prodcode: 0543089
DCT4/BB5 counter: ***
Done!
THANKS JAF ...
;)

[..::Sunil::..]

Thanks for sharing...:)



B.r.
Sunil.:)

[galactob]

where i find flash for n76 10.0.035?????????

thnks

[Fast Unlocker]

Nice sharing but flash file is currpoted so From where did you get that

RGDS

[..::Sunil::..]

Yes this version is not available on support...Hope viru sir will upload soon...



B.r.
Sunil.:)

[DAVI_1]

:) it was available before about 2 days...
so i was lucky , and download it...
but only APAC... not EMEA...:(
so JAF team do something about this error...
thanks...

[vid]

I have problem with NEW N76 flashing,2day before flash a phone(N76) ok with 1.98.20,but after update to 1.98.22 have this problem.

some 1 have flashing success N76 with 1.98.22???

Here is my LOG with USB flashing.

FILES SET FOR FLASHING:
MCU Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-135\RM135_10.0.032_prd.C00
PPM Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-135\RM135_10.0.032_prd.V14
CNT Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-135\RM135_10.0.032_022_000_U01_uda.fpsx
APE Variant file: NONE
Languages in ppm: English,Simpl Chinese,Trad Chinese,APAC1,Singapore,Malaysia
Done!
Backing up CRT...
Detected P-KEY: 9000xxxx
P-key nokia module version 01.00
Init usb communication...
Reading IMEI...
C:\Program Files\ODEON\JAF\ProgData\3539540xxxxxxxx_CRT_backu p_183xxxx.pm
Done!
Backup CRT OK!
Searching for phone...Detected P-KEY: 9000xxxx
P-key nokia module version 01.00
Init usb communication...
Found
Reading battery value...4033 mV
Init usb flashing...
Reading flashid... Error getting flash id...

[vipermsq]

I have the same problem, any have idea about it ??? the following is my log

JAF version 1.98.29
Detected PKEY: 90008CD4
Card life counter: 94.03%
P-key nokia module version 01.00
Detected version: 01.AE, Driver version: 0, Library version: 0
JAF DCT4/BB5 LOADERS DIR: C:\Archivos de programa\ODEON\JAF\Flash\
JAF DCT4/BB5 PRODUCT DIR: C:\Archivos de programa\SarasSoft\UFS\UFS_DCTxBB5\Products\
JAF USB LOADERS DIR: C:\Archivos de programa\ODEON\JAF\FlashUSB\
JAF DCT3/DCTL LOADERS DIR: C:\Archivos de programa\ODEON\JAF\Flash3\
FILES SET FOR FLASHING:
MCU Flash file: NONE
PPM Flash file: NONE
CNT Flash file: NONE
ADSP Flash file: NONE
APE Variant file: NONE
APE User Flash file: NONE
Switching to serial...
Powering the phone...
Failed! Aborting!
Searching for phone...Detected P-KEY: 90008CD4
P-key nokia module version 01.00
Init usb communication...
Found
MCU SW version: V 06wk41v21.3
30-03-07
RM-135
(c) Nokia
HW version: 0500
PCI version:
RFIC version:  17141714
DSP version: dsprap_pb06w41v23
APE SW Core version: 10.0.032
APE Variant version: 10.0.03214.01
APE Test version: rm135_ENO_x_2007wk07v0.040
Retu version: 15
Tahvo version: 22
APE HW version: 256
APE ADSP SW version: 256
APE BT version: HCI Version 8 (rev. 0). LMP Version 32 (rev. 4127). Manufacturer 13064.
Production serial number: CXA164399
Product code:
Module code:
Basic production code: 0530835
Flash code:
Order number:
Product specific data:
Long production SN: 0
ATO:
Default SN type:
IMEI plain: 353954010605427
IMEI spare to net: 3A 35 59 04 01 06 45 02
IMEI SV to net: 33 35 59 04 01 06 45 02 F8

LOCK STATUS:

CONFIG KEY: 2440700000000000
Provider: AT&T;U.S.A. (3650)
Key Code count: 0

Block 1:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
Block 2:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
Block 3:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
Block 4:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
Block 5:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
Block 6:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
Block 7:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN

Loading INI list...
Detected P-KEY: 90008CD4
P-key nokia module version 01.00
Init usb communication...
Reading product code...
Product Code:

FILES SET FOR FLASHING:
MCU Flash file: C:\Archivos de programa\SarasSoft\UFS\UFS_DCTxBB5\Products\RM-135\RM135_10.0.035_prd.C00
PPM Flash file: C:\Archivos de programa\SarasSoft\UFS\UFS_DCTxBB5\Products\RM-135\RM135_10.0.035_prd.V10
CNT Flash file: C:\Archivos de programa\SarasSoft\UFS\UFS_DCTxBB5\Products\RM-135\RM135_10.0.035_022_000_U01_uda.fpsx
APE Variant file: NONE
Languages in ppm: English,Chinese
Done!
Changing flashing settings...
Detected P-KEY: 90008CD4
P-key nokia module version 01.00
Init usb communication...
Reading...
FILES SET FOR FLASHING:
MCU Flash file: C:\Archivos de programa\SarasSoft\UFS\UFS_DCTxBB5\Products\RM-135\RM135_10.0.035_prd.C00
PPM Flash file: C:\Archivos de programa\SarasSoft\UFS\UFS_DCTxBB5\Products\RM-135\RM135_10.0.035_prd.V01
CNT Flash file: C:\Archivos de programa\SarasSoft\UFS\UFS_DCTxBB5\Products\RM-135\RM135_10.0.035_022_000_U01_uda.fpsx
APE Variant file: NONE
Languages in ppm: English,French,Italian,Spanish,German,Portuguese
Backing up CRT...
Detected P-KEY: 90008CD4
P-key nokia module version 01.00
Init usb communication...
Reading IMEI...
C:\Archivos de programa\ODEON\JAF\ProgData\353954010605427_CRT_ba ckup_233308.pm
Done!
Backup CRT OK!
Searching for phone...Detected P-KEY: 90008CD4
P-key nokia module version 01.00
Init usb communication...
Found
Reading SW version...06wk41v21.3 10.0.032
Reading battery value...3776 mV
Init usb flashing...
Reading flashid... Error getting flash id...

[stefanusrudy]

@vipermsg:
put sim card into phone,
do not select offline mode,
flash with sim card inside.

regards

[vipermsq]

i tried with the simcard inside but it didn´t work

i returned the phone to the client

thanks a lot


VIPER

[damabib]

i tried with the simcard inside but it didn´t work

i returned the phone to the client

thanks a lot


VIPER

SEEMS HAVE HARDAWARE MIXUP...

[viru]

i tried with the simcard inside but it didn´t work

i returned the phone to the client

thanks a lot


VIPER
This is sure prob with offline mode is used for flashing.


B.R.,
Viru