*** DCT4/WD2/TIKU FREE RPLs ***

[Bph&co]

Dear Forum Users,

We have decided to make a small contribution to the user comunity of this
great Forum. We have gained so much during the years, it's time to give back.

For a limited time we offer FREE rpl files for repair of bad imei (or full uem write).
Just make plain .ask file with your favourite flasher in Phoenix 2002 format,
and send as attachment to logs@b-phreaks.co.uk

You will get your rpl in 2-3 minutes.

Conditions:

1. We can give limited support, but if you have problems, post here please.
2. Not sure for how long will keep this online, depends on many factors.
3. Supported ASICs - 2,5,6 and 7

Best Regards, B-phreaks

[fonec]

u will make with u box or with any box support nokia

[Farrass]

the Best RPL service from b-phreaks

Regards .

[GALAXY*gsm]

very nice....

allready sent asick file and replay on moment by RPL

but need More details about that sir

regards
Galaxy

[WALEED@MOBITEC]

good!!! many thanks!!!!
but i have the compilation plz

[actGsm]

Hay , what's going up :0

good move , hope will last forever

best regards for ur team

www.actgsm.com

[Bph&co]

very nice....

allready sent asick file and replay on moment by RPL

but need More details about that sir

regards
Galaxy


Well simple,

If your imei is ??????????????? or phone resets after 32s, just read an .ask
file with any dct4 nokia flasher, compose new e-mail, attach the .ask file, then
send to logs@b-phreaks.co.uk

Then in few minutes, when you got an e-mail back, it will have an attachment -
the rpl file that will repair the phone. Just upload with your flasher and
your phone will be repaired.

If you have blank uem, just type any imei in the ask, tick the uem changed
option in your flasher, and then with the rpl you can have both imeis rebuild - uem and flash.

All DCT4/WD2/TIKU and DCT4PLUS are supported. It will not work on Asic11 - 2610, 6060 and obviously BB5.

Regards, B-phreaks

[Sparagna]

Rpl is for rapaire ?????????????????? than why?:

This message was automatically generated by the B-phreaks Log Calculator Ver. 3.0.369

Your mail was not processed because:

Wrong ASK format - '?' symbol found in Imei string !

Thank you for choosing our services and Best Regards
B-phreaks Team

[Bph&co]

Rpl is for rapaire ?????????????????? than why?:

This message was automatically generated by the B-phreaks Log Calculator Ver. 3.0.369

Your mail was not processed because:

Wrong ASK format - '?' symbol found in Imei string !

Thank you for choosing our services and Best Regards
B-phreaks Team

Yeah, but the server have no way of knowing your UEM imei. Your flasher
should read it and insert in the file, or you can put it manually.

[SER_PROG_DATA_IN]
IMEI_ESN=??????????????????? -> bad

[SER_PROG_DATA_IN]
IMEI_ESN=123456789012345 -> good

Hope this helps

[qwerthj]

Well simple,

If your imei is ??????????????? or phone resets after 32s, just read an .ask
file with any dct4 nokia flasher, compose new e-mail, attach the .ask file, then
send to logs@b-phreaks.co.uk

Then in few minutes, when you got an e-mail back, it will have an attachment -
the rpl file that will repair the phone. Just upload with your flasher and
your phone will be repaired.

If you have blank uem, just type any imei in the ask, tick the uem changed
option in your flasher, and then with the rpl you can have both imeis rebuild - uem and flash.

All DCT4/WD2/TIKU and DCT4PLUS are supported. It will not work on Asic11 - 2610, 6060 and obviously BB5.

Regards, B-phreaks


Hi!

For me very interesting that can repair the phone reset after 32s problem. I was think this problem by uem data is damaged. Than this problem only by damaged flash imei data?

WBR

PS: Sorry for my bad english

[qwerthj]

u will make with u box or with any box support nokia


The answer is in the first post:

Just make plain .ask file with your favourite flasher in Phoenix 2002 format,
and send as attachment to logs@b-phreaks.co.uk

[:: Micron ::]

Well simple,

If your imei is ??????????????? or phone resets after 32s, just read an .ask
file with any dct4 nokia flasher, compose new e-mail, attach the .ask file, then
send to logs@b-phreaks.co.uk

Then in few minutes, when you got an e-mail back, it will have an attachment -
the rpl file that will repair the phone. Just upload with your flasher and
your phone will be repaired.

If you have blank uem, just type any imei in the ask, tick the uem changed
option in your flasher, and then with the rpl you can have both imeis rebuild - uem and flash.

All DCT4/WD2/TIKU and DCT4PLUS are supported. It will not work on Asic11 - 2610, 6060 and obviously BB5.

Regards, B-phreaks


It think he - GALAXY*gsm - don't ask about how get the ask and write the rpl .

[Bph&co]

Hi!

For me very interesting that can repair the phone reset after 32s problem. I was think this problem by uem data is damaged. Than this problem only by damaged flash imei data?



Hi,

Yes sure. The reason is mismatch between uem and flash imei data. To repair
you need to calculate correct flash imei data. You can not correct the uem data because the uem
flash 'sits' behind custom logic, and we don't know how to change data once the flash has been
written.

BR

[hassan1975]

it,s very good work
no need to change money for ask to rpl .very nice :D







B.R.

[chardex]

nice move ....keep it up...

[nhepz_1980]

nice to hear ..more more

[daltontech_ph]

oh great....i hope it last forever for :Dfree

[ab media]

Dear Forum Users,

We have decided to make a small contribution to the user comunity of this
great Forum. We have gained so much during the years, it's time to give back.

For a limited time we offer FREE rpl files for repair of bad imei (or full uem write).
Just make plain .ask file with your favourite flasher in Phoenix 2002 format,
and send as attachment to logs@b-phreaks.co.uk

You will get your rpl in 2-3 minutes.

Conditions:

1. We can give limited support, but if you have problems, post here please.
2. Not sure for how long will keep this online, depends on many factors.
3. Supported ASICs - 2,5,6 and 7

Best Regards, B-phreaks

I hope more hopefully B-phreaks remain to give best don't for the time being give FREE RPL but further..
Thanks...nice work...:)

Best Regards, AB MEDIA PATI

[akhil_bbsr]

i hope B-phreaks will support us in this regard.....nice..work ..hope soon

[UnLoCkit]

wow it's nice info.............. i test to my 1100 ???????????......
and 2 to 3 second the rpl will send to my email......

step 1
read the imei using jaf check first if the imei is same in the back housing..

http://www.pics.romanticsingles.com/out.php/i14852_neo1.jpg

save the ask file using ufs..

step 2..

send your ask file to logs@b-phreaks.co.uk. by email
and this is the rply...

http://www.pics.romanticsingles.com/out.php/i14744_neo3.jpg


step 3..
write the rpl using ufs.....

http://www.pics.romanticsingles.com/out.php/i14743_neo2.jpg

and done....
the result is!!!

http://www.pics.romanticsingles.com/out.php/i14745_12062007.jpg

regard's to Bph&co and allsow galaxy gsm for this good info...
I hope is free forever !!!!!!
try now....

[beega]

can you do it free/forever for f1 owners?

[shahzad-0004]

good work man thanksssssssssssssssss


shahzad

[soft touch]

Wow!!!It's really a good news to us...Having IMEI problem...And it's for FREE!!!

Much thank to B-phreaks and CO,for your generousity...

[macoyski_14]

thanks for the info sir...nice post.

[Irfangk786]

YAh it's good contribution .It's Helpfull for all this gr8 forum member
Keep it up for long time.....

[rea1One]

thanks B-phreaks Team

it works for my 3230 ?????????????? imei


Power on the phone...
Reading imei...
???????????????
Opening RPL file...
Inspecting...
IMEI: 35709900xxxxxxx
DATA2 key is missing....Will be skiped!
Booting phone...

MCU ID: 0x1081
Sending algo...
Algo is ready...
Writting UEM...
UEM Write OK.
Powering the phone...
Unlocking...
IMEI: 35709900xxxxxxx
ASIC: 5
SW version: 5.0604.0
Checking locks...

Block 1:
Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN

Done!
DCT4 unlock counter: 1



br

dezel

[LHOT]

Hi is there any chance for asic11 coz i have four units here all ????????????

[Bph&co]

Hi,

Regarding the Asic11, we can do those, but manually, its not automated yet.
I don't think will have free time to add this. About free files for F1 users - its
best to use this service for now, otherwise i have to recompile the NSS server
same problem - too busy.

Regards

[HaNiNi Gsm]

Dear Forum Users,

We have decided to make a small contribution to the user comunity of this
great Forum. We have gained so much during the years, it's time to give back.

For a limited time we offer FREE rpl files for repair of bad imei (or full uem write).
Just make plain .ask file with your favourite flasher in Phoenix 2002 format,
and send as attachment to logs@b-phreaks.co.uk

You will get your rpl in 2-3 minutes.

Conditions:

1. We can give limited support, but if you have problems, post here please.
2. Not sure for how long will keep this online, depends on many factors.
3. Supported ASICs - 2,5,6 and 7

Best Regards, B-phreaks

it s really a big contribution...thanks..for this decision

[irobuang]

thank you very much b-phreaks

[r_o_v_i]

nice work!! thanks a lot!!

big help!!

[Bph&co]

Hi,

Somebody asked me how to get DATA1(UEM data) in the file. To get this,
please make sure you have key with correct value in the ask file:

CHANGED=1

BR

[CxVj]

Hi,

Regarding the Asic11, we can do those, but manually, its not automated yet.
I don't think will have free time to add this. About free files for F1 users - its
best to use this service for now, otherwise i have to recompile the NSS server
same problem - too busy.

Regards

nice update from f1 by b-phreak and many thanks for this contributions.

how long can make this free? forever or just a short time for this service?

[Tanvir]

Nice work .... Great Support from Bph&co :)

Regards,
Tanvir !
www.tanuelectronics.com

[::.imeimate.::]

good on you mate :)


BR

[stanner_austin]

service is tested and fully working..
in any type of box..
ufs3 ,ufs4 ,jaf box,prodigy ,mt box

all are tested..

but you must have uem imei for data1...

thanks goes to bhp&co i tested many time..acsii 2 ascii 5 and ...

[A1 Cell Solution]

can this service also repair bad/corrupted esn data of nokia cdma phones

[stanner_austin]

can this service also repair bad/corrupted esn data of nokia cdma phones
u must have correct esn ..
i tested 2112

[A1 Cell Solution]

u must have correct esn ..
i tested 2112


thanks for reply
can u explain this a little more

if i m not mistaken u mean to say that we should be sure that the esn printed on the label should be of the same pcb

[atiefoo-gsm]

hi,you 've done well about the free rpls files,congratulations
but i would like to know if you can do something about the
bb5 rpl files?just wanna know if you can reduce the price to 7$
i would be very much pleased with that and it will be ok with everybody
thanx.

[rontekgsm]

Nice & great work..Thaks bphreaks team

[Lhick]

Nice Move! Hope to avail the Free service.

[meisam]

Real great offer for all GSMHOSTING members.I really appreciate ur idea about giving back the benefits to gsmhosting.it's ur generosity.
Hope all GSM members try to be fruitfull for other members.
Thanks amillion times.

PS:Hope it last long.

[debeliamark]

Service work perfect - mail response is near a few seconds... on MT log must be only changed CHANGED=UEM ( FLASH ) with CHANGED=1 ( 0 ) ... Tested on 5140i with changed flash IC. Phone is OK now.

Realy good work, B-Phreaks team...

WBR, DebeliaMark, BG

[.:Nocturne:.]

Thanks b-phreaks team

Great work

[Bph&co]

hi,you 've done well about the free rpls files,congratulations
but i would like to know if you can do something about the
bb5 rpl files?just wanna know if you can reduce the price to 7$
i would be very much pleased with that and it will be ok with everybody
thanx.

Hi,

The price for BB5 files is high because there are still too many dishonest
people that buy with stolen credit cards, and keeping the price high
is the only way to keep this service running.

BR

[CxVj]

Hi,

The price for BB5 files is high because there are still too many dishonest
people that buy with stolen credit cards, and keeping the price high
is the only way to keep this service running.

BR

hi bph&co

dct4 plus asic 11 can calculate ask2rpl for free at this time now?
thanks in advance

[Fre3 Crack3r]

Thanks for this nice gift :)

Keep up good work !

Regards . . :D

[2lits]

Good Work BPh&Co... Many Thanks...

[stefanusrudy]

Hi,

Somebody asked me how to get DATA1(UEM data) in the file. To get this,
please make sure you have key with correct value in the ask file:

CHANGED=1

BR

sir, i try to make back up DATA1 and DATA2 for my phone (it's working normal).
[SER_PROG_DATA_IN]
IMEI_ESN=35152000080249
BTVAL=
DONGLE=SRN12349
CHANGED=1
DATA=0005A94AA47BA6E263BC57CB26F9E4D317C447E57F3D0 989FF2CACCD4574776B173DE036BDEE1C0330AF72E72F114F2 F3E0DE5856F6C14BB636C66CF31007FF05F2E5552FF5898C9E EC1

but i only got this :

[SER_PROG_DATA_OUT]
IMEI=351520000802490
DATA1=DCF84C2802BF43491CD05EFC012081C59AFC038D7CC6 0BD076026423A3859D685D919610A1243ADF
CHECKSUM=-12115

thanks in advance and regards,
stefanusrudy

[Jhay-r]

what a move... i'm now selling my d@mned UB and buy F1.....
that team is grasping opportunity to earn more while this team is starting be grateful to customer...

I am now switching for good....

[Dilip_Nath]

Yes its a nice support. Thanks.

[gsm4iran]

nice working thanks.

[gyuszko]

Tested on an NPL-2 , imei: ????????... and switch off after 30 sec. After writing generated RPL, phone is fixed now ;) Thanx Bhp&co

[gbluez]

Yesterday i post this about thread on this link..... (http://www.gsmhosting.com/vbb/showthread.php?t=410909). Yes, the most "loggy" team after GT :D. Guess what,,, they deleted it..huhauhauhaua..

@Bph&co:
You're the nokia man! :cool:

Salute Prodigy!

[Skiem_24]

heres my corrupt ASK file please calculate for my RPL let me try if its works well....

[ChIcO*GsM]

i just wanna know (Y now) u offer it for free
it's really a BIG QUESTION???



br/ChIcO

[marekom]

Data1 is no UEM data, this is a flash (pm208)!!!!!!!. UEM data is Data2.

[beega]

Hi,

Regarding the Asic11, we can do those, but manually, its not automated yet.
I don't think will have free time to add this. About free files for F1 users - its
best to use this service for now, otherwise i have to recompile the NSS server
same problem - too busy.

Regards

thank you sir, please spare time for your f1 users because any box could use the free service you give, we pay for f1 box and they(w/o f1 box) earn money from this free service. f1 owners own other boxes as well it would be nice to give them priority from *.ask -> *.rpl service.

with this, it makes no sense to buying f1 box if everybody else can use the service freely.

wbr,

[mehedi.h.j]

Thanks..................................Br.

[celluniversal]

This service is running still?
Becaz today i sended one Ask file for 3120 no reply still????

[..::AppleLinks::..]

yes i think service is stop.bcz i also send u files but no responce frm server.

[celluniversal]

b-phreaks Pls reply.According to u r reply only i want to decide wait or use payment service

[jerieves]

i already send mine.. then its an hour ago an no reply yet..

[Bph&co]

Hi,

The service is up again, the server was temporary overloaded.

Just to clarify: this is not some PR trick to get people hooked and then start
asking money. The time of selling RPLs is long time gone.

Just use and enjoy.

BR

[rea1One]

Bph&Co
thank you for your free ask to rpl service

[celluniversal]

Hi,

The service is up again, the server was temporary overloaded.

Just to clarify: this is not some PR trick to get people hooked and then start
asking money. The time of selling RPLs is long time gone.

Just use and enjoy.

BR

Bph&co
For me no reply still can u help me

[Bph&co]

Bph&co
For me no reply still can u help me


Try to send again. The server is running fine.

BR

[CxVj]

Hi

i think we need this software B-phreaks Log
Calculator Ver. 3.0.369

if you don't mind bph&co

thanks in advance

CMIIW

[pakmobile]

yes server working thanks bph&co thanks

pakmobile

[emso]

i got this when readed from mt box the ask file can i repair it nad please tell me how because i tried imei flas and imei flash+uem calculate and again i get imei with ?????????????
is it repairable and if yes how???

Configuration Info (9F):
Number of Flashes: 2
ADR 01 : 0001277E 00027111,SectorSize:10
ADR 02 : 00000001 00000000,SectorSize:00
ExtBUSC: AD7E B61A 1BBE 0BE2 7D58 6BE4 DBEE 6514
Read successfull!
UEM IMEI is: 356:1804>=8249

[nadeem_75]

Hi ,

I made ask file with JAF and sent E-mail but i got following message

This message was automatically generated by the B-phreaks Log
Calculator Ver. 3.0.369

Your mail was not processed because:

Wrong ASK format - '?' symbol found in Imei string !

Thank you for choosing our services and Best Regards
B-phreaks Team

Best regards

[mohA™]

i just wanna know (Y now) u offer it for free
it's really a BIG QUESTION???



br/ChIcO

first i have 2 say thanks 4 Bph&co offer



it's really a BIG QUESTION???


no brother
its not big question
he want from all new users 2 know thats him have abig and trustable server with low price
and realy i trust him

[RNC_EBM]

Hi,

Regarding the Asic11, we can do those, but manually, its not automated yet.
I don't think will have free time to add this. About free files for F1 users - its
best to use this service for now, otherwise i have to recompile the NSS server
same problem - too busy.

Regards

Thanks for the FREE RPL.

Hope you'll add this FEATURE TO FEDERALONE (NSS) on the NEXT UPDATE and HOPE IT WILL NOT BE ONLINE LOG, I mean STANDALONE.

Again, THANK YOU VERY MUCH


br

RNC_EBM

[golden_gsm]

Thank you team,the log was calculated for me for 2 mins.Very fast service.Thank you one more time!

[cyahus2k]

got in 2 minutes thanks for your ask to rpl services works like a charm..

[..::AppleLinks::..]

I ahve 3 nokia 2300, i take ask frm these phones and send to server .server gived me 3 rpl files but after uploding rpl files they are still same ??????. i try so many times for nokia 2300,but same, i done 1100 and 7610.

[Bph&co]

I ahve 3 nokia 2300, i take ask frm these phones and send to server .server gived me 3 rpl files but after uploding rpl files they are still same ??????. i try so many times for nokia 2300,but same, i done 1100 and 7610.

Hi,

Two possible reasons:

1. You have put wrong imei in the ask file (not UEM imei).

2. The imei in UEM has been written wrong, for example if IMEI(not ESN format)
you have diff then digit (0-9) simbol in the first 7 bytes.

BR

[..::Sunil::..]

I ahve 3 nokia 2300, i take ask frm these phones and send to server .server gived me 3 rpl files but after uploding rpl files they are still same ??????. i try so many times for nokia 2300,but same, i done 1100 and 7610.

Uem ic is damage...So change uem n read ask file n send it n try i m sure u will success...



B.r.
Sunil.;)

[bestncheap]

any body succes with imei dan uem data?
i try
changed=0
changed=1
changed=uem
all same only get data 1

br

bnc

[ozeracar]

i have the same problem

data2 not found

i write rpl and ufs say uem writing done but reading uem again

??????????????4 :eek:

how can i write this rpl to phone

[gbluez]

Tested on CDMA. Done smoothly.

To repair a corrupted flash imei, you don't need data2.
Data2 will be needed, if you're using a new BLANK uem.

@mod, please stick this thread.

BR

[ozeracar]

Tested on CDMA. Done smoothly.

To repair a corrupted flash imei, you don't need data2.
Data2 will be needed, if you're using a new BLANK uem.

@mod, please stick this thread.

BR



yes we need rpl for new uem

[ozeracar]

Tested on CDMA. Done smoothly.

To repair a corrupted flash imei, you don't need data2.
Data2 will be needed, if you're using a new BLANK uem.

@mod, please stick this thread.

BR



yes we need rpl for new uem

this solisuon not supported new uem ?

[Bph&co]

any body succes with imei dan uem data?
i try
changed=0
changed=1
changed=uem
all same only get data 1

br

bnc

Hi,

Sorry my fault, DATA2 generation was dissabled. Now the server is updated.

Please send again and report.

BR

[Janus2]

Hello, i try your service couple of minutes ago, but I receive an automated response which says:Calculation Failed! Reason: Not supported Asic Type.When I verify what Twister says when she reads from phone, it says ASIC 34, what can I do, the phone it's a 6310i, NPL-1, ASIC 2:confused:

[mobilecraker]

hi
thanx for this free service
but i try with one 6100 npl2 but no sucess
here the log after writing rpl
IMEI: ??????-??-??????-?, ASIC: 2
RPL File Info:
IMEI: 351535000993530
Warning: No SER_PROG_DATA_OUT CHECKSUM Record
Warning: No DATA2 Record
IMEI: ?
PROD: ?
1st Boot Ok, DCT4, UPP: 1120
Fl0: 0x01000000-0x017FFFFF,0001277E,Amd 29BDS064J
Algorithm: u_amd.fia, Ver: 4.52.0
UEM Writing Done, Time: 00:02

[sharaz191]

I sent the email before 1 hour still didnt get any response from server

[bestncheap]

GREAT!! NOW SUPPORT DATA 1 and DATA 2..
Altought its to late.. cause just using ub to create data 1 and data 2.. cause cust don't want to wait...
but no problem...

THANK mr Bph&Co :)

for getting data 1 and data 2 using this format:
CHANGED=UEM

BR

BNC

[..::AppleLinks::..]

Hi,

Two possible reasons:

1. You have put wrong imei in the ask file (not UEM imei).

2. The imei in UEM has been written wrong, for example if IMEI(not ESN format)
you have diff then digit (0-9) simbol in the first 7 bytes.

BR
i try so many times.i have 3 2300 phones..all have imei ?????.but after uploading rpl file the remain same.

[Bph&co]

i try so many times.i have 3 2300 phones..all have imei ?????.but after uploading rpl file the remain same.

Hi,

Read UEM imei with NSS and attach screenshot together with calculated RPL
please.

BR

[sharaz191]

@Bph&co (http://www.gsmhosting.com/vbb/member.php?u=1024) Is it sever working..I didnt get any reply from yours server....

[hrcell]

Dear Forum Users,

We have decided to make a small contribution to the user comunity of this
great Forum. We have gained so much during the years, it's time to give back.

For a limited time we offer FREE rpl files for repair of bad imei (or full uem write).
Just make plain .ask file with your favourite flasher in Phoenix 2002 format,
and send as attachment to logs@b-phreaks.co.uk

You will get your rpl in 2-3 minutes.

Conditions:

1. We can give limited support, but if you have problems, post here please.
2. Not sure for how long will keep this online, depends on many factors.
3. Supported ASICs - 2,5,6 and 7

Best Regards, B-phreaks

be the best, thank u so much

br
hr cell

[LHOT]

Free rpl still working???????????

[Bph&co]

Free rpl still working???????????

Hi,

Sure since i started this thread 4 days ago more then 1100 logs have been
calculated on our server.

Regards

[gbluez]

wow!
if... 1100 x $1 = just thrown away,,,, at least some bucks for saturday nite :)

[sakka]

i have jaf and ufs please can you give detail how to create with ask file because when i send to server i have this message

Wrong ASK format - '?' symbol found in Imei string !

[Bph&co]

wow!
if... 1100 x $1 = just thrown away,,,, at least some bucks for saturday nite :)

There are better pleasures in life then money :) You're here since 2004, so you
should know better.

BR

[usernome]

i have nokia 2300 imei ??????????4
i build rpl imei is ok, but is off after 30s.
this is uem bad or bad data?

i rebuild with data 1 + data 2

[CxVj]

i have nokia 2300 imei ??????????4
i build rpl imei is ok, but is off after 30s.
this is uem bad or bad data?

i rebuild with data 1 + data 2

me too i'm also got this problems any solution without uem change?

[usernome]

this is a poll question
one say is need rpl, another say is uem bad!

[richcell]

There are better pleasures in life then money :) You're here since 2004, so you
should know better.

BR


i like this word... you are the best people. money is nothing and it isn't all everything.

[celluniversal]

Dear Forum Users,

We have decided to make a small contribution to the user comunity of this
great Forum. We have gained so much during the years, it's time to give back.

For a limited time we offer FREE rpl files for repair of bad imei (or full uem write).
Just make plain .ask file with your favourite flasher in Phoenix 2002 format,
and send as attachment to logs@b-phreaks.co.uk

You will get your rpl in 2-3 minutes.

Conditions:

1. We can give limited support, but if you have problems, post here please.
2. Not sure for how long will keep this online, depends on many factors.
3. Supported ASICs - 2,5,6 and 7

Best Regards, B-phreaks



I thanks to Bph&co specially becaz i got 3 RPL files for free

ONCE AGAIN

http://img521.imageshack.us/img521/5192/thanxrn3mh2xr2.gif

[gsnbhagawan]

thanks
but i had problem with dct4 6070/3100-6610i
all 32 sec off after rpl and valid imei

and 6600 ngage all ok no problem
whats wrong with me

[mc_2k5]

mates, what does this mean?
what is the IMEI for this log..

READ UEM.. using jaf:

Booting phone...

MCU ID: 0x1120
Sending algo...
Algo is ready...
P-key nokia module version 01.00
Reading...
UEM ESN HEX: 5EFF0157, ESN PLAIN: 94/16712023

[cell-xp]

:D its really great service ... thx B-phreaks for this wonderful gift .... it took only 1 min and i got the rpl reply ..it also worked fi9

thx again
keep up the good work b-phreaks

BR

[Bph&co]

thanks
but i had problem with dct4 6070/3100-6610i
all 32 sec off after rpl and valid imei

and 6600 ngage all ok no problem
whats wrong with me


Hi,

Please attach log with uem imei read and calculated rpl, so i can check.

BR

[sharaz191]

guyz i sent two mails..But i dont get any reply.Why is that?Am i did anything wrong.I sent by yahoo.

I entered email address and attached ask as Ex: 353383000207574.ask
am i correct

[baywalker]

Yesss...it works to my 6020 cellphone today, thanks for your kindness sir B-phreaks I hope you can extend this service for long time.

I salute you and to your team.

My best regards.

[Bph&co]

Hi,

Just a reminder to all: if you use some crap e-mail service like Yahoo, Hotmail,
Gmail note that maybe you will not receive the mail back. Its possible that
is filtered, the attachments is included in the mail body as text or simply
blocked as spam.

For best results use proper e-mail: POP3 mail account + POP3 mail client(
example Thunderbird).

BR

[thanhit]

Bph&co please help
[SER_PROG_DATA_IN]
IMEI_ESN=35508200536097
BTVAL=
DONGLE=CD55ECB4
CHANGED=0
DATA=000555192AA562463D73D2BBA67F2FBA3F8D8A6D5A771 6BBC61B6A679A1CDB0229ABBB3F072087C68B9FBDB24B57E3F 419D0D5B88EF783192A40BF7BC3585EF9F326994BC009F46F4 935
DATE=2007-06-17 05:02:46

if CHANGED=0 RPL can working ??

[acay]

Thanks b-phreaks team!!!!!!!!!!!!!!

this very great!!!!!!!

[CxVj]

Hi,

Just a reminder to all: if you use some crap e-mail service like Yahoo, Hotmail,
Gmail note that maybe you will not receive the mail back. Its possible that
is filtered, the attachments is included in the mail body as text or simply
blocked as spam.

For best results use proper e-mail: POP3 mail account + POP3 mail client(
example Thunderbird).

BR


how about attach at here bph&co because so many using this email service like yahoo, hotmail, gmail.

thanks in advance

[Bph&co]

how about attach at here bph&co because so many using this email service like yahoo, hotmail, gmail.

thanks in advance

Hi,

Sorry, we have a lot of work, no time to make files manually.

BR

[sharaz191]

Sometimes if customer bring phone with different back cover.How can i get IMEI?I read from jaf and i didnt get last number.What is the solution for this?
for Ex: 35338300020757X

[Yuvi]

helllo sir,
i ha the rpl fileve mailed you a ask file but i havent get the rpl file
please help me its urgent. imei is =355034001641679

b.r.
yuvi

[mmgtco]

hi,
i am a beginner in this forum and need help please.
if i have a new phone and want to change the imei, so if i make a ask file with (tick the uem changed) and enter the new imei , so rpl can make a new imei for me or not?
beacuse it have to rewrite the new ume
B.R.
mmgtco

[mmgtco]

Dear Forum Users,

We have decided to make a small contribution to the user comunity of this
great Forum. We have gained so much during the years, it's time to give back.

For a limited time we offer FREE rpl files for repair of bad imei (or full uem write).
Just make plain .ask file with your favourite flasher in Phoenix 2002 format,
and send as attachment to logs@b-phreaks.co.uk

You will get your rpl in 2-3 minutes.

Conditions:

1. We can give limited support, but if you have problems, post here please.
2. Not sure for how long will keep this online, depends on many factors.
3. Supported ASICs - 2,5,6 and 7

Best Regards, B-phreaks


i write last pm beacuse of this.

B.R.
mmgtco

[gsnbhagawan]

Hi,

Please attach log with uem imei read and calculated rpl, so i can check.

BR


ask with griffin
[SER_PROG_DATA_IN]
IMEI_ESN=35179000738754
BTVAL=
DONGLE=
CHANGED=FLASH
DATA=0002CC0C9C4AFD23A4D392CCC5ECF2ACAFAB2E61CB214 1FAF613F7D0AD5478619C4BB3BE32356FCE21052ADB44A9291 B2F8B4159AEB39FD3AAC4665DAD523DCA94E24002DC195E97A F97
DATE=2007-05-09 19:54:23

rpl
[SER_PROG_DATA_OUT]
IMEI=351790007387542
DATA1=8168BD098E69F9ECD0A32918B61F3D7729423E4E6B00 4D556DFB964E6DD4C593C15898033AAC5DD6
CHECKSUM=19903

[cetech]

Tested mine 1100 ????????????4 with b=phreaks free logs reply in one second.

[zipzap_kill]

ok sir i will try ur service thanks in advance

[darmiles]

ok i try it tomorow! tanks to b-breaks

[trycktill]

hello i get the rpl from server but i cant write it in to phone using jaf nd n-box always error

[andre128]

for my 3100

IMEI: ??????-??-??????-?, ASIC: 2
RPL File Info:
IMEI: 355014009394290
Warning: No SER_PROG_DATA_OUT CHECKSUM Record
Warning: No DATA2 Record
IMEI: ?
PROD: ?
1st Boot Ok, DCT4, UPP: 1120
Fl0: 0x01000000-0x017FFFFF,00EC22FA,Sam K8S6415ETA
Algorithm: u_amd.fia, Ver: 4.61.0
UEM Writing Failed: Wr_UEM Wuem 15

[andre128]

if try uem changed=1

IMEI: ??????-??-??????-?, ASIC: 2
UEM Write Aborted
Init Local Mode Failed
Warning, Cannot Read Info from Mobile !
RPL File Info:
IMEI: 355014009394290
Warning: No SER_PROG_DATA_OUT CHECKSUM Record
IMEI: ?
PROD: ?
1st Boot Ok, DCT4, UPP: 1120
Fl0: 0x01000000-0x017FFFFF,00EC22FA,Sam K8S6415ETA
Algorithm: u_amd.fia, Ver: 4.61.0
UEM Writing Failed: Wr_UEM Wuem 10
UEM Write Failed

[harim_1981]

for me...

after sending the file it gives me failure notice....

what may be fault....

[harim_1981]

yes i got 2 RPLs.... thanks for your great services....

thank...

[Formingus]

gr8 man thks for support

[Bph&co]

ask with griffin
[SER_PROG_DATA_IN]
IMEI_ESN=35179000738754
BTVAL=
DONGLE=
CHANGED=FLASH
DATA=0002CC0C9C4AFD23A4D392CCC5ECF2ACAFAB2E61CB214 1FAF613F7D0AD5478619C4BB3BE32356FCE21052ADB44A9291 B2F8B4159AEB39FD3AAC4665DAD523DCA94E24002DC195E97A F97
DATE=2007-05-09 19:54:23

rpl
[SER_PROG_DATA_OUT]
IMEI=351790007387542
DATA1=8168BD098E69F9ECD0A32918B61F3D7729423E4E6B00 4D556DFB964E6DD4C593C15898033AAC5DD6
CHECKSUM=19903


Hi,

Thanks, but i don't see uem imei. 35179000738754 - this is your string imei,
you can find on the back label. I need the imei written in UEM, it has the

zz zz zz zz zz zz zz Fz format (where z is 0-9). Your box can't read that ?

BR

[..::GsmEasy::..]

thanks brother its working with my 1100

[..::GsmEasy::..]

with my 2300 turn off after 32 second help me please

[CxVj]

with my 2300 turn off after 32 second help me please

try full erase first using jaf, ufs, f1 etc then fullflash again after that write pm then unlock.

CMIIW

[gufo]

how to read nokia 3586i esn?

[power2005]

thank u so much i get 3 rpl

[ttpower]

is the (free) service still working?I tried some times...no reply :(

[Bph&co]

Hi,

The server was temporary offline last night, but now is online again and all
queued mails are sent with delay.

BR

[ttpower]

Hi,still no reply,maybe it's my mistake..I made the .ask file with griffin box,the phone is a 7610/rh-51,the uem is new,so I write manually the new imei in griffin interface(the imei is different from the original),then select "calculate IMEI flash and UEM areas" and "read" option.Just re-sent again,still no reply.Can you help me?
Best regards

[..::GsmEasy::..]

try full erase first using jaf, ufs, f1 etc then fullflash again after that write pm then unlock.

CMIIW

i will do this butt same problem not solved

[gufo]

how to calc 010235006090062.ask?

[CxVj]

i will do this butt same problem not solved

change ic uem your old uem is bad.

CMIIW

[CxVj]

Hi,still no reply,maybe it's my mistake..I made the .ask file with griffin box,the phone is a 7610/rh-51,the uem is new,so I write manually the new imei in griffin interface(the imei is different from the original),then select "calculate IMEI flash and UEM areas" and "read" option.Just re-sent again,still no reply.Can you help me?
Best regards

i attach for you at here rpl file, but wait i must send an email to logs@b-phreaks.co.uk

i'll try my best as i can

Br

[CxVj]

Hi,still no reply,maybe it's my mistake..I made the .ask file with griffin box,the phone is a 7610/rh-51,the uem is new,so I write manually the new imei in griffin interface(the imei is different from the original),then select "calculate IMEI flash and UEM areas" and "read" option.Just re-sent again,still no reply.Can you help me?
Best regards

here is this your rpl files just in 1 minutes i got that rpl.

thanks bph&co for quick reply servers, using thunderbird very fast.

Br
CxVj

[CxVj]

if you one to calculate your ask file just send it an email to ultracomm@gawab.com and i will send to logs@b-phreaks.co.uk and i attach at here or send to your mail again. i'll try do my best as soon as possible.

thanks bph&co the rpl services is still working.

br
CxVj

[DAVI]

hi,
tried with 1100 and 2300 but always got error during writing..

http://i93.photobucket.com/albums/l61/Davi_edz/errorimei.jpg

[trashed]

@DAVI

hi,

open your rpl in notepad and see if it contains DATA2...

if yes, remove DATA2 and save it, try to write that RPL and see if it works...

[DAVI]

@trashed

tried removind data2 but got this error..

IMEI: ??????-??-??????-?, ASIC: 2
RPL File Info:
IMEI: 010500004774094
CHCK: 16083
Error: Bad SER_PROG_DATA_OUT Checksum
UEM Write Failed

[DAVI]

also tried making another .ask

uem chandge: 0

http://i93.photobucket.com/albums/l61/Davi_edz/error2.jpg

but after succesfull write uem..imei still ?????

http://i93.photobucket.com/albums/l61/Davi_edz/error3.jpg

[sharaz191]

Thnks for RPL service.I got rpl for 2600.Sucessfully wr UEM.IMEI is ok network ok .BUt phone getting off after 30 seconds.Why is that?

[CNW]

maybe you should try with another box like Mt-Box etc...

@b-phreaks,

many thank's, waiting for BB5 :D

[sharaz191]

Is that UEM can write only once?

[tajinder]

hi updating 1100 ask file pls send me rpl file

[CxVj]

hi updating 1100 ask file pls send me rpl file

here is your rpl, next time send email do not attach at here.

Br

[gufo]

how to calc cdma esn?

[mobilagy]

Greeeeeeeeeeeeeeeeeat JOB, tested more than one time successfully, more power to your hands, it shows how your goodness is, many thanks ...

[tajinder]

sir uem writing done but imei still ??????????????????????????????????

[tajinder]

IMEI: ??????-??-??????-?, ASIC: 2
RPL File Info:
IMEI: 355385005625500
Warning: No SER_PROG_DATA_OUT CHECKSUM Record
IMEI: ?
PROD: ?
1st Boot Ok, DCT4, UPP: 1201
Fl0: 0x01000000-0x011FFFFF,00208823,St M58MR016
Algorithm: u_st_i.fia, Ver: 4.52.0
UEM Writing Failed: Wr_UEM Wuem 10
UEM Write Failed

[mobilagy]

sir uem writing done but imei still ??????????????????????????????????

IMEI: ??????-??-??????-?, ASIC: 2
RPL File Info:
IMEI: 355385005625500
Warning: No SER_PROG_DATA_OUT CHECKSUM Record
IMEI: ?
PROD: ?
1st Boot Ok, DCT4, UPP: 1201
Fl0: 0x01000000-0x011FFFFF,00208823,St M58MR016
Algorithm: u_st_i.fia, Ver: 4.52.0
UEM Writing Failed: Wr_UEM Wuem 10
UEM Write Failed

May be it's UEM hardware faulty, anyway try to erase full flash then flash again with latest software version then try to write .rpl file again, if worked then OK & if still the same then it's UEM faulty & i have faced same problem before & it was like that, B.R ...

[descovery_gsm]

many thanks
and verry good

[jwalant]

Hi...
here is ask... need rpl for the same....
Thnks...

[Bph&co]

Hi...
here is ask... need rpl for the same....
Thnks...

Hi,

Please find your file attached.

BTW, we can no longer provide the free service. I think it was great help,
i checked the server logs, since i made the posting some 7000 logs were
calculated. I hope everyone who had a chance to repair his phone is happy.

If you have F1 device, please download the latest version of NSS and you
will be able to continue to enjoy using the free service.

BR, B-phreaks

[mobilagy]

@ Bph&co , it was working fine till at once it replies to me telling:

"Your mail was not processed because: Your e-mail address has not be registered to any account!"

although it was working before with the same e-mail address, but now it always replies with the previous msg, so what is the problem ???

Hi,

Please find your file attached.

BTW, we can no longer provide the free service. I think it was great help,
i checked the server logs, since i made the posting some 7000 logs were
calculated. I hope everyone who had a chance to repair his phone is happy.

If you have F1 device, please download the latest version of NSS and you
will be able to continue to enjoy using the free service.

BR, B-phreaks

Oh, sorry, i havn't read this post yet, now i got it, anyway thx for the free service that was ...

Another small question; if someone have F1 device so he we be able to enjoy using free service forever or what ???

[jwalant]

@@@Bph&CO
Thnks....it works.....
Again i should say THANKS

[bestncheap]

GREAT WORK!!!
At Last.. Free DCT4 RPL is FINISH!!
Thank For Ur Kindness Mr Bph&Co

that mean for all F1 user will always get free rpl??

BR

BNC

[CxVj]

Thanks for free rpl services bph&co.. Long Life for the king

[rea1One]

thank you Bph&co for free rpl

[harim_1981]

thanks for your great services...

[CellM@n]

wanna say thanks for free rpls so far..

thx

[harim_1981]

sir,

when i send the ASK file it replies me as " CHeck your Account"

what to do sir....

[nimanima]

service stoped
we lost free rpl?????

[jwalant]

Sir,

need rpl for the same.

Thnks....

[nelv]

thanks for your very great services

[trashed]

hi,

CAN'T you read?

b-phreaks already told that his free RPL server is FINISHED!

if you want to repair your phone, go to sales section...

no more FREE this time...

[simomex]

plz rpl dct4 rh-18 1100

[jwalant]

@@trashed.....
if rpl service is not free than mod will defenatly close this thread.
I think Bph&co will decide to give or not give free rpls....

[HAROON's]

Then This Thread Should Be Closed




Br
Gsmcrazy1

[RD7]

@jwalant
Here's your rpl :)

[RD7]

@simomex

Here's your rpl :)

[jwalant]

@jwalant
Here's your rpl :)


thnks for support.....

[jwalant]

Igot this error when i write rpl to 1100


IMEI: ??????-??-??????-?, ASIC: 2
RPL File Info:
IMEI: 353378000661507
CHCK: -11490
Error: Bad SER_PROG_DATA_OUT Checksum
UEM Write Failed


if u want rpl dtail it is......


[SER_PROG_DATA_OUT]
IMEI=353378000661507
DATA2=95A2209858F599E0BDD909839FF1F169D7826F6BBE87 B07C819E7760FCF3AB1C36532A5161EDC6BA661F844550568B 95B44D4B342022CE2CA438DF2CC1603C0B2B5B29BEF840C855 E2A1751A741FFCF88E53739FEE6FC990
DATA1=93DAA9EAE5505BEC260690467D05B489E4D55FA98041 635310C5C584B4803C0542211D23634C9220
CHECKSUM=-11490

Do needfull....

[ozgur]

show tıme fınısh no free now

Our Latest Log prices:
2000 logs x 0.35 USD = 700 USD
1000 logs x 0.50 USD = 500 USD
500 logs x 0.60 USD = 300 USD
250 logs x 0.80 USD = 200 USD
100 logs x 1.50 USD = 150 USD
50 logs x 2.00 USD = 100 USD
10 logs x 5.00 USD = 50 USD

[wajda3]

hey my phone is death and i need rpl for new flash ic
my imei is 356241007646268
thanx very much :)
ggsm@poczta.fm

[hedayat]

its a good for all but piopel need a few dayes

[harim_1981]

sir,

anyway they have finished their service i think....

thnaks for giveng these many days free service...:)

[gsmservices]

yes was a good service helped us a lot . . .
hope to see this free service again
thanx. . . . . .

[jwalant]

Need help for post #180 plz........

[descovery_gsm]

I Send Many Time Many Ask And Reseved ManY Rpl
But Now Isend Many Ask But Don.t Reseved Any Rpl
Why....why....why

[mobilagy]

I Send Many Time Many Ask And Reseved ManY Rpl
But Now Isend Many Ask But Don.t Reseved Any Rpl
Why....why....why

*********** man, read carefully ***********


we can no longer provide the free service. I think it was great help,
i checked the server logs, since i made the posting some 7000 logs were
calculated. I hope everyone who had a chance to repair his phone is happy.

If you have F1 device, please download the latest version of NSS and you
will be able to continue to enjoy using the free service.

BR, B-phreaks

[gsmstroong]

Thanks B-phreaks..............

Best Regards
Gsm Stroong

[descovery_gsm]

thank you man
thank you dear

[andy_con]

could someone explain how new uem's and rpl's work?

so you put a new UEM chip in the phone then what???

[mobilagy]

could someone explain how new uem's and rpl's work?

so you put a new UEM chip in the phone then what???

after UEM replacement it depends; if you want to keep the same IMEI as the one on the set's label sticker you will have to read .ask file then to buy credits to convert it to .rpl file then to write it to the phone, if you don't care about IMEI matching or you want to save money from buying logs then you can write any saved .rpl file from your PC but to be same asic type, that's all, hope you got it, B.R ...

[andy_con]

yes very simple.

so why cant we convert our own ask files to rpl??

how do you put what ever imei you want into the rpl then???


after UEM replacement it depends; if you want to keep the same IMEI as the one on the set's label sticker you will have to read .ask file then to buy credits to convert it to .rpl file then to write it to the phone, if you don't care about IMEI matching or you want to save money from buying logs then you can write any saved .rpl file from your PC but to be same asic type, that's all, hope you got it, B.R ...

[andy_con]

yes very simple, thanks

so why cant we convert our own ask files to rpl?

how do you put what ever imei into the rpl, if you take the ask files from the phone???


after UEM replacement it depends; if you want to keep the same IMEI as the one on the set's label sticker you will have to read .ask file then to buy credits to convert it to .rpl file then to write it to the phone, if you don't care about IMEI matching or you want to save money from buying logs then you can write any saved .rpl file from your PC but to be same asic type, that's all, hope you got it, B.R ...

[mobilagy]

it's not that simple you imagine !
.ask to .rpl file conversion is a logarithmic matter & just few people all over the world know it & they are investing a lot of money from it.

[andy_con]

it's not that simple you imagine !
.ask to .rpl file conversion is a logarithmic matter & just few people all over the world know it & they are investing a lot of money from it.

oh ok then.

so where can you buy uem from??

[gobindopura]

i have a nokia 2300
Default SN type:
IMEI plain: ???????????????
IMEI spare to net: FA FF FF FF FF FF FF 0F
IMEI SV to net: F3 FF FF FF FF FF FF 2F F4

ask=
[SER_PROG_DATA_IN]
IMEI=??????/??/??????/?
PRODUCTCODE=
DONGLE=00000000
CHANGED=0
DATA=0002DF0C3C6935146D1BD77FB9652FEC3D1C0AADB23B5 78E0892400216038FA839A90657D8887AC2B4F2B461D33A3A6 A414F2AB145C51F4C4EA9F5DB9394CEA90F049FA3ECC094A15 466
DATE=13.07.2007 05:17:53
CHECKSUM=0

[SIM_PROG_DATA_IN]
TYPE=2
IMEI=??????????????0
PRODUCTCODE=
DONGLE=00000000
CHECKSUM=0

[Badra]

please i neeed rpl please i neeed rpl

[jwalant]

@@ RD7 can u help me for......??

If yes here ask for the same.

Waitting for rpl from your side....

Thnks for great support....

[gobindopura]

Please Help

[ser_prog_data_in]
Imei_esn=35504700363078
Btval=
Dongle=00038442
Changed=flash
Data=0002894168b24bf9d9e44d91d24fa562133560cfc7b98 70052b2af9fd924345053920973d6d3c3a41f8858b5f099ff5 2320e56b4948b16dcba5fc3982d977e7f0a11995569a3fc576 607
Date=7/29/2007 5:03:49 Pm

[CxVj]

Hi,
Free rpl services is game over so don't attach again it here useless, bph&co will not respond to you.

Moderators close this thread please.

thanks in advance

[adeelsaeed60]

Plzz give that rpl file plz post on there plzzzzzz

[mobilagy]

What's wrong with you guys !!!
Can't you understand !!!

!!! It's OVER !!!

[Syed]

time to close it
anyway if anyone still expect to get their rpl they should mail to the e-mail provided on first post, not post on forum.

WBR
Syed