Manual Unlock SE DB2020 Ilustrated CID49, 51 CID49, 51 Using COM Cable *ONLY* [Archive]

kikodog

06-16-2007, 15:39

http://img243.imageshack.us/img243/7521/image002ie6.jpg (http://imageshack.us)

Procedure of unlock DB2020 CID49, 51

1. Download kulandi client http://gsminfo.home.pl/_ftp/guar/KK_Client/KKClient.exe

http://img243.imageshack.us/img243/2659/image006zd3.jpg (http://imageshack.us)

2. Open KKClient , it will create directory "SLF_FILES"

http://img243.imageshack.us/img243/9245/image008mr5.jpg (http://imageshack.us)

3. Download all SFL files from http://gsminfo.home.pl/_ftp/guar/ and unpack into directory "SFL_Files"

http://img243.imageshack.us/img243/1038/image010ch7.jpg (http://imageshack.us)
Files must be in "SFL_Files" directory like for example X:\path_to_KKClient\SFL_Files\*.sfl where x: is your hard drive letter

4. Now KKClient is ready to work. Connect USB Cable DCU 60 e and power on phone and install drivers

http://gsminfo.home.pl/_ftp/guar/Data/DB2020_USB_Drivers.zip

5. Press read info

http://img521.imageshack.us/img521/9199/image012al3.jpg (http://imageshack.us)

6. Hold C and Plug cable.

http://img521.imageshack.us/img521/1183/image014mp0.jpg (http://imageshack.us)

6.1 If says Firmware supported for patch unlocking, you can unlock.

http://img521.imageshack.us/img521/3563/image016fh1.jpg (http://imageshack.us)

6.2 If Says to update UROM in alert message, please update, press ok.

(i don´t have any image of this J)

6.3 When KKclient with show not supported firmware and client can wait some time then good thing is to READ INFO by USB cable and send to us all information, we will try to find fimrware and add to support.

You can solve this flashing phone, with other firmware, for this you will expend one more credit .

http://img521.imageshack.us/img521/5348/image018oc2.jpg (http://imageshack.us)

6.4 If says UROM CID 52, you cannot unlock for now… wait more updates hehe. From version 1.57 kkclient will show message for CID52 phones: "Warning!!! CID is not supported"

7. Be sure, that software says supported firmware. Now connect you COM Interface (cruiser cables, box, usb-smart or other…)

8. Press in main software -> Settings

http://img101.imageshack.us/img101/7654/image020yc6.jpg (http://imageshack.us)

9. Press detect, Choose your COM interface, and pretend speed (we recommend 921600), select “Use RS232 communication”

http://img101.imageshack.us/img101/6222/image022mt6.jpg (http://imageshack.us)

10. Press Accept

kikodog

06-16-2007, 15:53

11. Press Read Info and On on phone.

http://img101.imageshack.us/img101/9953/image024jt8.jpg (http://imageshack.us)

If says support and all ok, now you can unlock mobile phone. Please re-check CID, if UROM CID is 52, do not unlock.

12. Select SIMLock 49, 51

http://img101.imageshack.us/img101/9932/image026ad7.jpg (http://imageshack.us)

13. Press Flash phone and press ON on phone. Wait until program finishes - it can take around 50 seconds.

http://img505.imageshack.us/img505/739/image028bo0.jpg (http://imageshack.us)

http://img505.imageshack.us/img505/6613/image030kc5.jpg (http://imageshack.us)

Done!!!!!!!!!

Thanks Kulandi and GsmInfo for good or *** J support.

Support -> http://forum.gsmhosting.com/vbb/forumdisplay.php?f=390

http://img505.imageshack.us/img505/4711/image004ce5.jpg (http://imageshack.us)