PDA

View Full Version : Nokia Tool by Jordik v3.03 free....

schwantz
05-08-2002, 08:10
With this program you can unlock, repair 4 locks closed, activat net monitor, calculate faid, change imei etc....


Thanks to FG for the program

download (http://www.schwantz.hpg.com.br/zip/nokia_tool_303.zip)


Schwantz
legija
05-08-2002, 09:38
Thanks, but i have it too.:D
schwantz
05-08-2002, 22:03
http://www.schwantz.hpg.ig.com.br/web/jordik1.gif
gsmsoftwares
05-09-2002, 00:23
nice
Copperhead
05-09-2002, 02:33
Originally posted by schwantz
With this program you can unlock, repair 4 locks closed, activat net monitor, calculate faid, change imei etc....


Thanks to FG for the program

download (http://www.schwantz.hpg.com.br/zip/nokia_tool_303.zip)


Schwantz

I ALREADY USED IT IN CHANGING 3210 IMEI...... =
success in changing 6210 imei, to think it is my own unit whew!

but i didn't try clearing sp locks yet...

and to think it is capable of changing BOTH imei!

my phone has network and works properly no problem!

i am at a loss for words because i tried changing imei with other soft and it is very difficult...with jordik's it is a cinch in changing!
i can breath easily after....

thanks to jordik! for the soft and dedication!

thanks to schwantz for the webspace and patience!
farry
05-09-2002, 06:28
another good job from schwants
bye the way how do u repair the four lockes closed ? do u just click on open?

br

farry
pks
05-09-2002, 07:29
is this software compatible with windows 2000? (i doubt it) :(
smartymarti
05-09-2002, 07:50
once again top marks
schwantz
05-09-2002, 09:37
Just push CLEAR SIM LOCKS

and all for locks gona be open:)
Kole64
05-09-2002, 16:51
Great :) this software works fine with Win2000!
pks
05-09-2002, 18:17
yeh it does work with win2000 :D

now i'm waiting for a flasher to work perfectly under win2000. anyone? :rolleyes:
KATOUE
05-09-2002, 19:20
Great this software works fine with WinXP!:D :D
kostin
05-09-2002, 20:31
Clear SIM Locks - Don't work
May Be I do Somthing wrong - Please Explain
Telephon - Nokia 3210,
MCU SW - V 06.00 03-10-00 NSE-8 (c) NMP.
IMEI - 449150102867910
Origin IMEI - 449150102867910
MSID - 821BD62B6854283ABCB3302AC3
ROM - 4
PPM - B
______________
ICQ 94722220
A. Kostin kostin@senrgy.ru
kostin
05-09-2002, 20:34
E-Mail is kostin@senergy.ru
k_tytek
05-09-2002, 23:10
Soft yes is great but what different is betwen it and Rolis 1.7b ?
I think that Rlis 1.7b is one of the best soft with have ever been written .:p
But of course this soft is ok and great job has been done, so congratulation. :cool:

To Kostin if it not work try Rolis sw or nk_cal.;)
mudboy
05-10-2002, 00:37
Hi,
SP clean not worked for me,too.
Tested on 3210 6.00
regards
aspog
05-10-2002, 01:11
Nice Soft! but..... clear all 4 simlocks not working.... maybe needed few modifications...

Cheers!
nab
05-10-2002, 19:37
difference between this and older such software is that it allows you to apply UI factory settings to reset security code etc ...
kostin
05-10-2002, 20:08
Where to Get nk_calc?
____________
ICQ 94722220
A. Kostin kostin@senergy.ru
nab
05-10-2002, 20:30
email me and i will send it to you :)
SeEbOy
05-10-2002, 23:26
send me the soft

PLZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZ



seeboy50@hotmail.com
simlockapd
05-10-2002, 23:39
clear locks works fine for me..
but you must click SW reset after it..
then read phone again and you'll see.. all locks open..

tested it on 5110, 5510, 3310, and 8850

no problems

i'm running windows ME
nab
05-11-2002, 00:40
i have sent it to you :)
FG_FG
05-11-2002, 07:52
The soft is fully working with original/factory fbus/mbus cables (gnd, tx, rx and mbus).
It was I that gave it to schwantz.
It doesn't work only on 5110/6110 DSP ROM 3. If you click on "Clear Sim locks" on this version phones, you'll get 4 locks closed in EEE... and FFF.... You can sove this problem with b-phreaks soft or with Windls 3.1/3.4.
Some times, in some PC's you need to turn off and turn on phone again.
But in general it works fine.
Copperhead
05-12-2002, 02:32
Originally posted by FG_FG
The soft is fully working with original/factory fbus/mbus cables (gnd, tx, rx and mbus).
It was I that gave it to schwantz.
It doesn't work only on 5110/6110 DSP ROM 3. If you click on "Clear Sim locks" on this version phones, you'll get 4 locks closed in EEE... and FFF.... You can sove this problem with b-phreaks soft or with Windls 3.1/3.4.
Some times, in some PC's you need to turn off and turn on phone again.
But in general it works fine.

the best part i like is the changing of imei....

i hope you will release a version which will support change product code too!

thanks for a great software!
gamalabel
05-13-2002, 09:12
This software unlock 5210 and 5510???
hanoon
05-13-2002, 11:34
working with me for 6250 and good work...


good luck!
Copperhead
05-16-2002, 14:44
Originally posted by FG_FG
The soft is fully working with original/factory fbus/mbus cables (gnd, tx, rx and mbus).
It was I that gave it to schwantz.
It doesn't work only on 5110/6110 DSP ROM 3. If you click on "Clear Sim locks" on this version phones, you'll get 4 locks closed in EEE... and FFF.... You can sove this problem with b-phreaks soft or with Windls 3.1/3.4.
Some times, in some PC's you need to turn off and turn on phone again.
But in general it works fine.

sir,

can you change 5110 dsp rom 3 imei? on jordik?

thanks

i like jordik because it is easy to change both imei at the same time no problem....but i hope it will do rom3 too?
Abe
05-17-2002, 11:29
When u have all 4 locks clkosed you must CHANGE IMEI first...........not really change...just click on change ime and leave original imei......
after that turn phone off and back on and do update faid....thats all......
3axap
05-20-2002, 18:45
mates do not write here you imei numbers.
qatareye
05-23-2002, 11:00
when i want to start Nokia Tool by Jordik v3.03 this massage come that there is a " MSCOMM32.OCX" IS MISSING CAN ANY BODY TELL ME CAN I FIND IT
kostin
05-23-2002, 12:35
http://www.filesearching.com
fofodaman
05-26-2002, 22:36
guys, there was a solution for 8210 with rom5, nkcalc does not work, & rolise's did not do the job also,, was it b-freaks that did the simlock & faid ?
mc1_mc2
05-28-2002, 15:47
:confused:
i'm having trouble starting the NOKIA TOOL by JORDIK 3.03, my computer displays "component 'MSCOMM32.OCX' or one of its dependencies not correctly registered: a file is missing or invalid"

can anybody help me sort things out...thanks in advance.
mc1_mc2
05-28-2002, 15:49
by the way i already have MSCOMM32.OCX in my system but still the problem remains...........................:confused:
TechSonic
05-28-2002, 22:57
Check your mail ...

Regards
Permonik
05-29-2002, 19:45
Here is MSCOMM.... HERE (http://www.gymzr.cz/gsm/gsm.zip)

I have tested Jordik's SW (for Jordik) - from version -0,00000001 :D
Everything works 100% (sometimes are troubles with 33x0 - ERROR, but the phone is unlocked....)

If you need to unlock something, you should open the lock and then press Open locks (MUDBOYi, jsi z Čech,tak se klidně obrať na mě (ales@bohdalov.cz) -dělám Jordikovi občas testy,tak mám nějaký zkušenosti....).....

If you have still any troubles, you can contact me (permonik@bohdalov.cz)

Jordik has more useful SW - you can visit Jordik's web (http://www.unlock.sk)
mc1_mc2
05-30-2002, 12:20
:) :) :) :)
thank you very much for the help.............IT WORKS.........:)
Permonik
05-30-2002, 14:51
...of course...!!!
If you have any troubles, contact me (permonik@bohdalov.cz) ...
;)
qatareye
05-30-2002, 18:31
FAINALY THANK YOU VERY MUCH ITS .....WORKS
BufferMess
05-30-2002, 18:35
Thanks Jordik for the great soft! Tested with 8210, 3310, 5110. Works well!

Good Luck in your later studies
BufferMess
Permonik
05-30-2002, 20:40
Jordik has too useful SW for Siemens and any others...
But for Siemens it cost cca 2000,- SVK (=50,- USD?)
If you are intersting in it, you can contact me (ales@bohdalov.cz)
¨
Good day!!!
KATOUE
05-30-2002, 21:52
Do you have Soft for Siemens C45 ..

Thanks .