Mtk/flash Tool Of Chineese Miracle!

[Jr Telecom]

HI every body

FREE ALL FLASH TOOL OF CHINEESE MIRACLE!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Read/write Flashing & unlocking.
__________________________________________________ _________

If you wanna make cable, try to find TX,RX,GND in phone's mainboard.



DOWNLOAD HERE

http://savefile.com/projects/808505671



Best Regards
jrtelctg@yahoo.com

Required password-01819620300

[JHON_DREAM]

Hi SIR JRTEL_CTG.
sir u r not only good u r the best.
very very nice share . Its like gift for us.
thanks for sharing.
realy good job.


BEST OF LUCK.
BR,
JHON.

[faresmonmon]

thank u very very goooog

[doller]

jrtel nice solution for gsm unlocker
thanx from "rehan"

[tuhingr]

Just post here which is working properly.

[Cvetocheck]

@jrtel_ctg
What i need install for normal fonts? i have "?????" buttons, no words.
please help

[mohamed75]

thx for sharing but where to find flash files

[Jr Telecom]

Its will be help u & others___________________

[mrmisudnjbd]

which calbe i use to flash it can u tell me mrdinmisu@yahoo.com

and where i get the china flash file pls:)

[minhtrimobile]

eng ver here!

http://dalatgsm.com/forums/showthread.php?t=2888

[Jr Telecom]

Which model flash file u need? please post....
I will try 2 help u......if possibe post a picture.





Thanks all
_________

[cdma-india]

can u help me , i required flash file for this model

[ihsanali]

this is better post if flash files share here

[segun01]

i need flash file for n99i pls. dis phone when insert sim card keep rebutting

[Jr Telecom]

Just lit a bit////N99 flash file
__________________
HERE

http://www.4shared.com/file/17306592/c20f8999/N99_CKT26_05C_PCB01_GPRS_MT6226_S01BB07_VIETNAM_V1
http://www.4shared.com/file/17306348/93f96278/N99_F06_XSH_V2_PCB01_GPRS_MT6227_S01F06_XSH_V2_R61

ENJOY

All the best

[ruslanuz]

i need flash file for n99i pls. dis phone when insert sim card keep rebutting

Just make a format of your phone , thats all!!!

[Cvetocheck]

eng ver here!

http://dalatgsm.com/forums/showthread.php?t=2888

those software need dongle!

[hackerbd]

Hmm.Thats good.But work with own risk.I m not interested.


BR
!!bdlshohel!!

[Cvetocheck]

2bdlshohel
u know software without risk?!?!?
just no flash any phone, use screwdriver & vender's service center

[sallu]

what is MTK. Is it some type of chip??
All mp3/mp4 players , chinese based nokia sony erricson modelsa are mtk based??

How i can determine mobile is mtk based??

Any one can explain clearly?

[Cvetocheck]

2sallu
the most chines phones based on MTK processors!
mtk based mobile has processor type ''mt****' (mt6226ba; mt6226m; mt6218.)

[Jr Telecom]

SOME FLASH FILE ADDED
............HERE............JUST CLICK & SEE DETAILS
http://www.4shared.com/file/17306888/3319c295/Nokia_N76i_CectM608_G01_PCBV1_1_GPRS_MT6226_S01ZXT
http://www.4shared.com/file/17322152/9c11aa7e/CECT_N95_M878TL2_PCB01_GPRS_MT6226_S01M878TL2TOS_0 0_10_VE.html
http://www.4shared.com/file/17325538/b0407483/n95_cect__q610_M500ZT_B1_PCB01_GPRS_MT6226_S01MAUI _05C_W06_01_01_VE.html
http://www.4shared.com/file/17325908/9277de24/K808_CKT26_05C_PCB01_GPRS_MT6226_S01BB07_VIETNAM_V 1_6_070110_TSB.html
http://www.4shared.com/file/17344567/6a740f92/N73c_M503T_D31_PCB01_GPRS_MT6227_S0000_1.html
http://www.4shared.com/file/17325908/9277de24/K808_CKT26_05C_PCB01_GPRS_MT6226_S01BB07_VIETNAM_V 1_6_070110_TSB.html
http://www.4shared.com/file/17344919/cb974d36/N73G_GZX860_THLVIE_PCB01_GPRS_MT6226_S01ZX860_THLV IE_1_5_VE.html
http://www.4shared.com/file/17345318/9bb9f13/N91-CKT26_05C_PCB01_GPRS_MT6226_S01WOLF6B_YX_LMU_201_0 61228_EPSON_OV0_SS75_CTF.html


ENJOY!!!!!!!!

[hackerbd]

2bdlshohel
u know software without risk?!?!?
just no flash any phone, use screwdriver & vender's service center
I don' get you,what the ....r you saying.Always try to good post next time.


BR
!!bdlshohel!!

[himu_mm]

thanks for sharing.
realy good job.
HIMU, Khulna, Bangladesh.

[nagval]

to jrtel_ctg:

may be you have flash 6226-toshiba(th50vpf5782aasb, th50vpf6782aasb) 16mb
models: cect v668, nokia n9

tnx

[minhtrimobile]

to jrtel_ctg:

may be you have flash 6226-toshiba(th50vpf5782aasb, th50vpf6782aasb) 16mb
models: cect v668, nokia n9

tnx


all chinese flash file, you can find here with small fee!:)

www.dalatgsm.net

[Jr Telecom]

Some pinout HERE
It can Helps..................

[JHON_DREAM]

all chinese flash file, you can find here with small fee!:)

www.dalatgsm.net

bro,
why u talk about small fee. here SIR JRTEL_CTG gives us all flash file free so why we spend some small fee there.if u want to wast of your money than u go there.

BEST OF LUCK.
JHON.

[vodafone_banha]

i have cect t688 pda

any one have tested pinout

[janar_jk]

Hi guys. I have here some dead cect`S but is this tool able to flash dead phones too? Also one Dsney q7 where to get flashfile and drivers.

BR Janar

[JHON_DREAM]

Hmm.Thats good.But work with own risk.I m not interested.


BR
!!bdlshohel!!

sir bdlshohel.
Every soft have some risk. In other device or soft when u accidiently damaged any set than who got the risk ?
so risk is nothing in this soft.
& you r not interested its your personal mater.but always appreciated a good work & bravier person who knows how to takle the risk.

BEST OF LUCK.
JHON.

[DVD B@ppy]

sir bdlshohel.
Every soft have some risk. In other device or soft when u accidiently damaged any set than who got the risk ?
so risk is nothing in this soft.
& you r not interested its your personal mater.but always appreciated a good work & bravier person who knows how to takle the risk.

BEST OF LUCK.
JHON.

Everybody must have right to say there commant.Actually a soft without model and info.Info raise but little.If anyone like to earn money form chinees model choose mtk box.support is more than price.Its commertial purpose.
As a home little tool is good like it but make at first about suitable.
This forum contain good information and also wrong information by user.
so Be carfull
Also china made ufs8 has some chines model for free also with cable.Chake gulistan patal market.

I think China made mobile capture hole world very soon.Already captueared vast area.

[JHON_DREAM]

Everybody must have right to say there commant.Actually a soft without model and info.Info raise but little.If anyone like to earn money form chinees model choose mtk box.support is more than price.Its commertial purpose.
As a home little tool is good like it but make at first about suitable.
This forum contain good information and also wrong information by user.
so Be carfull
Also china made ufs8 has some chines model for free also with cable.Chake gulistan patal market.

I think China made mobile capture hole world very soon.Already captueared vast area.

yah bro everybody right to say there commants but i said that always apperecited the good work.if u apprecited them u got better work from them next time coz its sharing & helping site for gsm world.
this forum contain good information & also wrong information by user,take the good information & for bad information ADMIN & MODERATOR handel that.
yah i know about UFS8 & patal market.not only patal market u also find it at the whole world.

thanks for your accelent co opration & some useful informationhere.

BEST OF LUCK.
JHON.

[jimm07ct]

good work jrtel,
but anybody success ?????

try and send us.

[DVD B@ppy]

good work jrtel,
but anybody success ?????

try and send us.
Its Old Version But work well

[cdma-india]

requred song a168 flash file if any one have plz post it

[JHON_DREAM]

Its Old Version But work well

BROTHER DVD B@ppy,
which model u work ?
& have u any new version ?
pls post here new ver & share your experince with us which model u work before.its helpfull post for us.

BEST OF LUCK.
JHON.

[shahzad-0004]

Thanks man nice work

shahzad

[halongmobile]

all free http://www.halonggsm.com/diendan/index.php
ENG http://www.halonggsm.com/diendan/index.php?langid=1

[kashi4gul]

but wat abt unlocking..............?

[mkwatis]

@jrtel_ctg;

COLOR="Cyan"]JUST CLICK & SEE DETAILS[/COLOR]
http://www.4shared.com/file/17306888/3319c295/Nokia_N76i_CectM608_G01_PCBV1_1_GPRS_MT6226_S01ZXT


we appreciate your donation to the forum on this,and my need is how to reset this chinese phone and how to put/configure TV,and finally how to reset to english*any code please?

[mkwatis]

@jrtel_ctg
does normal rs 232<normal t191cable,/ is capable for flash?thse chinese phone

[doller]

i want to flash file chines nokia6300 and its cable pinout

[mobile star]

thx for this tool ;)
do u have flash file for cect v668

thx

[tuhingr]

good work jrtel,
but anybody success ?????

try and send us.

Thats the point!!!!
Who was successed plz. post here.

[tuhingr]

good work jrtel,
but anybody success ?????

try and send us.

Thats the point!!!!
Who was successed plz. post here details.

[kanwal]

it is very good info and files for all of us keep it up thankssssssss

[TWISTER_FLasher]

HI ALL ...
I HAVE Ma Bao 99 - 1 Dual SIM Card Phone, AND IT'S WORK FINE AT OFFLINE MODE BUT WHEN I INSERT SIM CARD IT RESTART ALWAYS.WHAT IS THE PROBLEM ?

W.B.R
TWISTER

[Jr Telecom]

Try 2 format ur phone
Not yet Hardware problem...

[kanwal]

jrtel_ctg brother can u give me cect 668 nokia6211 mtk 6226a flash file i neede it very much waiting and loocking diffren sites and forums but fail to find

[gsm_wrold2007]

jrtel_ctg can u give me maximus or itel flash soft or flash file

[halonggsm.com]

HI ALL ...
I HAVE Ma Bao 99 - 1 Dual SIM Card Phone, AND IT'S WORK FINE AT OFFLINE MODE BUT WHEN I INSERT SIM CARD IT RESTART ALWAYS.WHAT IS THE PROBLEM ?

W.B.R
TWISTER


download here
http://www.ehalonggsm.com/Upload1/download.php?file=8b5d9fc8377c845d0ecaae123db2a492

and format your phone by mtk box

[halonggsm.com]

Free flash file for mtk box

http://www.halonggsm.com/diendan/showthread.php?t=2691

login

name:hacker2601
pass:123456

[gsm_wrold2007]

jrtel_ctg can u give me maximus or itel flash soft or flash file

[Heather_88]

download here
http://www.ehalonggsm.com/Upload1/download.php?file=8b5d9fc8377c845d0ecaae123db2a492

and format your phone by mtk box

This is really helpfull information, I think. But unfortunately the file was infected by the virus, please check and clean that file, so I can download it also.

Thanks to much to HalongGSM

[tuhingr]

Here is latest downloader.
http://www.mtk-box.com/mtk2.asp

[gibelcom]

Hi All!
I'm looking for full flash image HUAYU CL189 (dual SIM).
Phone image: http://www.114ku.com/tradeinfo/tra/w10/200752317322550451.html
Pinout (2*6)
mic ? RxD ? TxD gnd

Vbat ear1 D- ear2 D+ +5V
Master:
CPU: MT6226BA
FLASH: TV00570003ADGB (Toshiba)
Slave:
CPU: MT6205BA
FLASH: K5A6317CTM-D770 (Samsung)
SW:
MTK2
MAUI.05C.W06.16, released in april 2007.
I have full flash image readed by MTK Flash Tool v.4.0.0.0; but any version of MTK Decrypt etc. cannot recover this file :(
My ICQ: 294695950.

[gsm_wrold2007]

http://www.114ku.com/tradeinfo/tra/w...322550451.html

where is file how can i download it

[gibelcom]

where is file how can i download it
You can find flash image file here:
http://www.gsmforum.ru/attachment.php?attachmentid=10271&d=1185174526

[lucefer]

thanks alotttttttttt

[psp_ps2_2005]

i have nec v668 dual sim...the phone works properly offline..but when i insert
sim the phone resets after 5 sec. how can i format this phone without using
mtk box??????

thx in advance

[chronic]

HI every body

FREE ALL FLASH TOOL OF CHINEESE MIRACLE!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Read/write Flashing & unlocking.
__________________________________________________ _________

If you wanna make cable, try to find TX,RX,GND in phone's mainboard.



DOWNLOAD HERE

http://savefile.com/projects/808505671



Best Regards
jrtelctg@yahoo.com

Required password-01819620300 sir help to change tool language from chines to english

[Dilip_Nath]

I need CECT V-90 flash file for MTK-Box, do anybody give me a better link?

Thanks all.

wbr

[Raa_z]

CECT U8810 china cet .Problem is:memory card not support mp-3,mp-4 but card is ok.pls help meeeeeeeeeeee.

[/ARIF/]

boss thanks your link but i cant download any soft and file
my user name is arif5050
pass 123456
i need nokia chinan79 free soft and flash file
please boss help me
thanks

[/ARIF/]

any one please help me how to flash china n79
where i am found its free soft and flash file please help me argent

[md3862]

Dear Sir,
May I know where I can purchase a set of the cable to work with the program?

Thanks.

Ashley

[TriddicK]

HI every body

FREE ALL FLASH TOOL OF CHINEESE MIRACLE!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Read/write Flashing & unlocking.
__________________________________________________ _________

If you wanna make cable, try to find TX,RX,GND in phone's mainboard.



DOWNLOAD HERE

http://savefile.com/projects/808505671



Best Regards
jrtelctg@yahoo.com

Required password-01819620300



Thanx, Bro!
You-MAN,you-REAL MAN!!!

[md3862]

Dear Sir,
Actually I have some fds got the CECT V6 Veptu phone using in UK and France, it works perfect at the beginning, however, after using this phone for some time like 1~2 months, it started to say the sim card registration is failed.

after that, no matter what sim card they insert inside the phone are all the same saying sim registration fail.

May I know is that reason of phone lock or Imei Lock?

Regards,
Ashley

[supportbox]

i need free tools for support chinamobile tv format and repair

[jignesh_1000]

can u pls upload pinout for n-77 china pls and flash file pls

[jignesh_1000]

pin out for ktectch N8899 flash file flasher pin-out and format pls sir

[chubbie]

@jrtel_ctg;

COLOR="Cyan"]JUST CLICK & SEE DETAILS[/color]
http://www.4shared.com/file/17306888/3319c295/Nokia_N76i_CectM608_G01_PCBV1_1_GPRS_MT6226_S01ZXT


we appreciate your donation to the forum on this,and my need is how to reset this chinese phone and how to put/configure TV,and finally how to reset to english*any code please?

CHINESE MODELS:
default user code: 1122, 3344, 1234, 5678
Engineer mode: *#110*01#
Factory mode: *#987#
Enable COM port: *#110*01# -> Device -> Set UART -> PS Config -> UART1/115200
Restore factory settings: *#987*99#
LCD contrast: *#369#
software version: *#800#
software version: *#900#
set default language: *#0000# Send
set English language: *#0044# Send
set English language (new firmware): *#001# Send

[bdzeus]

we are proud of you.


thnx boss

[Jr Telecom]

EASILY MAKING UR JOB
___________________
cable making pinout here

Download please

www.firmwaregsm.com/thiengiathi/newpinout.rar

[supportbox]

Plz Help Me For Pinout And Tools Zt 6618

[Jr Telecom]

ADDED NEW MTK FLASH TOOL V3.1.02
____________________________

Download here
http://www.4shared.com/file/23759325/cac04783/FlashTool_v3102.html?dirPwdVerified=d53cc1a2




Best wishes
JR (jrtelctg@yahoo.com) TELECOM

[Jr Telecom]

ALSO ADDED

MTK FLASH TOOL _V2.9.1007

HERE
http://www.4shared.com/file/23760720/870b2e8a/FlashTool_v291007.html?dirPwdVerified=d53cc1a2




ENJOY!!
JR TELECOM

[anastamir]

hi,
i need to the new version of mtk box ,i saw the version mtk 3.7.1007

[宁国徽]

HI every body

FREE ALL FLASH TOOL OF CHINEESE MIRACLE!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Read/write Flashing & unlocking.
__________________________________________________ _________

If you wanna make cable, try to find TX,RX,GND in phone's mainboard.



DOWNLOAD HERE

http://savefile.com/projects/808505671



Best Regards
jrtelctg@yahoo.com

Required password-01819620300

MTK can brush the chip writing a data , being able to distinguish a machine voluntarily as long as guiding a document correctly even if some machines of series not knowing definition's words is the same

[squidmaster]

anything for CECT P168?

[imtiaz]

realy good job going on thanks to share everyone

[mazhar_dha]

hi i need maximus EX 60 Flash File plz help me

[elkirf]

..........thks for the soft. good share.

[.:KHALIFA:.]

need n73 flash file urgent

[systemworm]

This flash tool became like mobimb.Many users edit something in software and afterwards they post it as a new version.If you search carefully u can find fourth version of this soft too :D

[remso69]

hi
i have a sony-ericson cect t689
my probleme is : my phone shut down an power on all time
i want to get the firmware update
thanks excuse my inglish im an Ivorian

[systemworm]

hi
i have a sony-ericson cect t689
my probleme is : my phone shut down an power on all time
i want to get the firmware update
thanks excuse my inglish im an Ivorian
U need to make right cable afterwards format phone.No need to change firmware

[Jr Telecom]

Just Format ur phone
all will be ok




hi
i have a sony-ericson cect t689
my probleme is : my phone shut down an power on all time
i want to get the firmware update
thanks excuse my inglish im an Ivorian

[panadol]

how to flash the phone?

any manual i using usb cable the port setting what should chose?

[systemworm]

how to flash the phone?

any manual i using usb cable the port setting what should chose?
U can't flash using usb cable.U need to modify it to rs-232 interface cable

[thenorthstar]

I have chinese miracle samsung D900.how to flash the phone? I am use R232 and Mtk/flash Tool Of Chineese Miracle but not dedect D900.How to backup and load flash?
and I need to full flash file for chinese miracle samsung D900.
plz help me

CPU: MT6226

http://www.imagehack.eu/tr/uploads/5dc07d10ce.jpg

http://www.imagehack.eu/tr/uploads/6c831b2765.jpg

[InfinitySupport]

@thenorthstar
be careful with MT6226 and flashtool, in some cases you can make your phone damaged

[bdzeus]

jrtel_ctg


gr8 job..


zeus
kushtia

[master138]

realy good job going on thanks to share everyone

[GeorgeT]

MTK CECT P168

Would like to locate pinouts for the usb cable and a source for the flash file.

Thank you

[ansari123]

good work man its realy usefull for all

[minhtrimobile]

VeMtk V3.1b english support cpu mt6228! some small big fixed! and some new tool!

http://dalatgsm.com/forums/showthread.php?t=2888&page=6

[systemworm]

VeMtk V3.1b english support cpu mt6228! some small big fixed! and some new tool!

http://dalatgsm.com/forums/showthread.php?t=2888&page=6
It's for Hintel box I think or works without Hintel dongle?

[Niaz Hussain]

Need N95s P168+ china pinout

[Jr Telecom]

HERE N95s
"""""""""""""""""""""""""""""""
Nokia-N95s
Nokia-N95-PDA
Cect-P168
connector_2x5_mini
4: Phone Rx (RJ45 pin 2)
5: Phone Tx (RJ45 pin 3)
6: Gnd
""""""""""""""""""""""""""""""""

[tuhingr]

@thenorthstar
Always Batter with Infinity Chiness Miracle latest tools.
Its safe!

[masterbirth]

do you have flash file for K666?

[waskareem]

please bros can i use usb cable to format i yes please can any one give understandable configuration

[towhidbd]

Some pinout HERE
It can Helps..................


Boos,

I have MULTI BOX, Can I sucess china mobile flash using Multi BOx?

[towhidbd]

Some pinout HERE
It can Helps..................


Boos,

I have MULTI BOX, Can I sucess china mobile flash using Multi BOx?

[Jr Telecom]

Yes, If U Have Good Cable

[yellowperil]

Is there a version like the Chinese Cocktail that will allow you to read and write files with a file manager interface ?
for the CECT P168.

[yellowperil]

Is there a version like the Chinese Cocktail that will allow you to read and write files with a file manager interface ?
for the CECT P168, without the need for a dongle, just a straight rs232 com port adapter ?

[yellowperil]

Can someone please post a cect P168 iphone (clone) firmware with the bluetooth and triband support please BIN FULL firmware file.

[Master Soft]

Can someone please post a cect P168 iphone (clone) firmware with the bluetooth and triband support please BIN FULL firmware file.

I need too, can someone post this Bin file please.

For this phone please
http://img177.imageshack.us/img177/4360/39132343md4.jpg

[ufs3]

please I need MTK/flash tool I ca not find it in links help plz I need too n95 pinout thx

[PTA]

HI every body

FREE ALL FLASH TOOL OF CHINEESE MIRACLE!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Read/write Flashing & unlocking.
__________________________________________________ _________

If you wanna make cable, try to find TX,RX,GND in phone's mainboard.



DOWNLOAD HERE

http://savefile.com/projects/808505671



Best Regards
jrtelctg@yahoo.com

Required password-01819620300

Software is down, please REUPP, thz

big thz, PTA

[mcclinic]

hi jrtelctg(Tontu bhai) thanks for nice posting here. i format few china set(cect,suny ericssum) but steel these problem.this problem is when power on the mobile few words(chinese or english) stay in the display.what can i do?

[gsm3rdG]

need flash language (china) for:
n95 cpu 6227 _618
thks

[kabirhossain]

hi jrtelctg(Tontu bhai) thanks for nice posting here. i format few china set(cect,suny ericssum) but steel these problem.this problem is when power on the mobile few words(chinese or english) stay in the display.what can i do?
your problem toch pad check pen celibration.

[Jr Telecom]

New Chinese Flash tool...4.1

Download HERE http://www.savefile.com/files/1174233

Pass-01819620300



Regards

Jr Telecom

[JHON_DREAM]

hi jrtelctg(Tontu bhai) thanks for nice posting here. i format few china set(cect,suny ericssum) but steel these problem.this problem is when power on the mobile few words(chinese or english) stay in the display.what can i do?

your problem is Chk touchpad pen celibration.when u Formate any pda based set than u need to chk the touchpad pen celibration.
to solve your problem Just click any where your pen in lcd touchpad.after full match the celibration Data chaking than you entered the phone.



BEST OF LUCK,
JHON.

[Jr Telecom]

Link is all right......Chk ur intenet connection setting
anyway use another link http://www.savefile.com/files/1174233






HI every body

FREE ALL FLASH TOOL OF CHINEESE MIRACLE!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Read/write Flashing & unlocking.
__________________________________________________ _________

If you wanna make cable, try to find TX,RX,GND in phone's mainboard.



DOWNLOAD HERE

http://savefile.com/projects/808505671



Best Regards
jrtelctg@yahoo.com

Required password-01819620300

Software is down, please REUPP, thz

big thz, PTA

[Martinix]

i have a zt6688 phone which reboots every time i switch it on can u pliz help

[Jr Telecom]

Use right cable,format the phone........ALL RIGHT



i have a zt6688 phone which reboots every time i switch it on can u pliz help

[ahmed_massoud]

Hi:
i heard ther is program can flash the shina mobile dirct from pc with norma cable any news


Try 2 format ur phone
Not yet Hardware problem...

[Jr Telecom]

Yes, if u make good cable then u can
Just flash backup from ur phone (edit the flash file by hex editor)
Then write backup......

[HUM]

is this possible to repair china phones with cracked software using com port cable,if possible than plz upload the software with complete guidence and how to modify cable, also flash files,thnx in advance...............!

..::HUM::..

[calvinpower]

i can not download mtk tool please upload it somewhere else

[csramesh]

Hi, my model is 3GSM TV Y390 - chinese mobile. i have a very big problem. that i can't view the call history. there is a option of call history, but if i go inside and see it, it says no entrys. even i can't able to get dialled - missed - recieved call history.

if any oprions is there can you send it my mail id. which specified below this msg.

pls help me in this regards

thanks in advance
c.s.ramesh
csrameshkumar@gmail.com

[waleedy]

do i need a box or this software work without it,i need answer very urgent

[GSM SKILS]

i can not download mtk tool please upload it somewhere else
where are you find here !!!!!

[waleedy]

Guy's ,very urgent,do i need box 4 this software or it work without it?

[.:SUBRATA:.]

No need any box. it works with normal com port cable. for pin out search for it in forum.

B.R
Subrata

[Tune_HOuse]

[quote=Jr Telecom;2543278]SOME FLASH FILE ADDED

i need help with cect N528
Ineed (1) Flash File (2) Cable pinout
(3)dvers for usb cable to com
urgent PLz
Thnx in advance

[atozkhokon]

i need maximus v 90 flash file pls.

[GSM SKILS]

pls a new program needed if u have zt 199 cant format in this 4.1 here its pinout

[humayun]

very very thaxxx sir

[adnanali]

dear PLZ upoad here the file /link for V12 plz guide for this model V12 what is this we know this is china but ???????????model and flash file plz thanks

[tkowsar]

good support and share, keep up br.

[Jr Telecom]

There r some Chinese mobile pinout help here
Hunt them!!!!!!!! http://www.savefile.com/files/1262426

http://www.savefile.com/files/1262426

[c_ahmad79]

There r some Chinese mobile pinout help here
Hunt them!!!!!!!! http://www.savefile.com/files/1262426

http://www.savefile.com/files/1262426
brother i cant download this
can you upload this to any site.. like rapid share...
thanks

[infogsm]

any french flash file for this chinese N70 ? (cpu 6226)

br

[Jr Telecom]

brother i cant download this
can you upload this to any site.. like rapid share...
thanks

Brother ,Write here exactly which type of probs to download.
I chked now and b4 ,its ok still now
Anyway http://www.savefile.com/download/1262426?PHPSESSID=7984879fa861ea13390c7441237cd048 Click here (http://www.savefile.com/download/1262426?PHPSESSID=7984879fa861ea13390c7441237cd048 Click%20here)

[biddut1979]

sir ,cable pic pls...........

[nishaon]

Me too badly need flash file for chinese V12, please share if anyone have.

[Jr Telecom]

Released!!!!!!!!!!
Also solution avaiable of Infenion cpu(Chinese) base phone
""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""

contact with any msnger

[9A7PNB]

i need flash
mt 6226 (128mb+32mb)spansion S71PL127N 32 MB SRAM NOR INFO id(OOO1,227E,2220,2200)CSO
thats is from mtk tool
6800 luna copy

[ms_ervin]

can any1 help me with a idea for cect t689.. phone is dead i mean it does work without sim.. which prog i have to use?