Please send your problem here,of china phone!

[ahmed2004]

i need flash tc500+
thanks

[sneha]

If it's software problem.pls try flash again by other CPF-BOX2.;)

:mad::mad::mad::mad::mad::mad::mad::mad::mad::

brother if u not help then say clear that i cant haelp in this thread this is my 5th post but not satisfied answer .. i say u that thaer is a flash file but some language problem i can download from that forum u know chinees language so i say u that u download from there

[arvinddald]

hii buddy... i need china AVI vid conveter...

plz post me here... arvinddal@yahoo.com

i hope u help me... :)

[mekz]

so can anyone help me with this Nokia 5310 or not? i think i just need to format it but i cant find a usb driver that will work on my XP machine...

[Unknown®]

so can anyone help me with this Nokia 5310 or not? i think i just need to format it but i cant find a usb driver that will work on my XP machine...

Hello br!!

Please check here:
http://www.gsmhosting.net/vbb/showthread.php?t=563091

[anz76]

hi telemaster,i need your help wt my n99i dual ,firts its only hung-up problem,after i format using infinty now only white screen wt letter that i cant understand.....

here is the logs:
COM8 [VCP0] selected
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection enabled
eeprom backup enabled, it may takes several minutes !
Action: read NOR flash
Boot...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing[6226:8A02:8A01]...
CPU: MT6226
high speed boot disabled
chip: 0031:655A:99C7
high speed disabled
boot step size: 0002
Release Power button now !
Boot Done
Initialize...
detecting chip #00 in region #00...
flash: 01227E22202200:2AEA0000000000
flash: Amd AMD/Fujitsu std [D 0004x010000 003Ex040000 0004x010000] 16Mb
detecting chip #01 in region #00...
flash: 01227E22202200:2AEA0000000000
flash: Amd AMD/Fujitsu std [D 0004x010000 003Ex040000 0004x010000] 16Mb
number of flash chip/regions detected: 02/01
Initialize Done
Set baud...
921600
Set baud Done
Initialize bootcode...
Initialize bootcode Done
Check firmware integrity...
device parameters autodetection in progress..
detecting chip #00 in region #00...
flash: 01227E22202200:2AEA0000000000
flash: Amd AMD/Fujitsu std [D 0004x010000 003Ex040000 0004x010000] 16Mb
detecting chip #01 in region #00...
flash: 01227E22202200:2AEA0000000000
flash: Amd AMD/Fujitsu std [D 0004x010000 003Ex040000 0004x010000] 16Mb
it's time to stop: 2A0000EA18F09FE518F09FE518F09FE518F09FE518F09FE5
number of flash chip/regions detected: 01/01
total flash region size: 01000000
detect device identification#1...
detection phase #1...
detect device identification#1 finished
identification#1 structure: 2nd [enhanced] generation
security area#1 is Ok
security area#1 backup saved: C:\Program Files\InfinityBox\ChineseMiracle\backup_security\i d.0D418A2D.[NEOTEL26_06B_PCB01_GPRS_MT6226_S01.0860G1_601_V904 9.BIN_6CF19891].rpl
====================
New firmware detected:
NEOTEL26_06B_PCB01_GPRS_MT6226_S01.0860G1_601_V904 9.BIN

- make "Read full flash" operation
- send "backup_system_log_..." file to support: mt62xx@gmail.com
- send flash backup file(s) to support: mt62xx@gmail.com
- include in your e-mail full text from phone back label (phone name etc.)
====================
identification#1 detection finished
device-id: 0D418A2D
identification#1 protocol ver: 04
ver. sw1: NEOTEL26_06B_PCB01_GPRS_MT6226_S01.0860G1_601_V904 9.BIN
ver. sw2: 0860G1_601_V9049, 6E670E93
ffs offset/size: 00E00000/00200000
detect device identification#2...
detection phase #1...
.
warning: optional information not found,
if phone works well just ignore this warning
detect device identification#2 finished
detecting eeprom/ffs area in 1 chip(s)...
standard eeprom/ffs offset detected: 00E00000
flash: 01227E22202200:2AEA0000000000
checking area[00000000]: 00000000-00FFFFFF...
eeprom/ffs found near: 00E00000
detecting eeprom/ffs size...
eeprom/ffs size: 00200000
ffs chip: 00
eeprom/ffs area: 00000000:00E00000-00FFFFFF
Check firmware integrity Done
Check firmware content...
Check firmware content Done
Backup required data...
reading [flash[NEOTEL26_06B_PCB01_GPRS_MT6226_S01.0860G1_601_V904 9.BIN]]...
warning: wrong data size at 0x002A1000, retry...
read error recovered
warning: wrong data size at 0x00825000, retry...
read error recovered
warning: wrong data size at 0x009D3400, retry...
read error recovered
file saved: C:\Program Files\InfinityBox\ChineseMiracle\flash[NEOTEL26_06B_PCB01_GPRS_MT6226_S01.0860G1_601_V904 9.BIN]_20080728-173740.B0M.bin
file saved: C:\Program Files\InfinityBox\ChineseMiracle\system_log_0D418A 2D_NEOTEL26_06B_PCB01_GPRS_MT6226_S01.0860G1_601_V 9049.BIN_6CF19891_20080728-173814.B0X.bin
Finished, time used: 790 sec
Remove/Install battery now !

[mwitamasiaga]

Please send your problem here, I can help you to solve the question of software and hardware of Chinese phone

HOW IS IT ?,please i have ZTC ZT888 N88 i need pinout any body

[Unknown®]

HOW IS IT ?,please i have ZTC ZT888 N88 i need pinout any body

Post details about your set like connector type and cpu?

B.R

[suntysunty]

Post details about your set like connector type and cpu

[nasagih]

try with mtk tool and post result.


Dear sir,

This is MTK FlashTool v3 popup window when trying to reD FLash :


Error : S_BROM_DOWNLOAD_DA_FAIL(2004)

[H/W] Fail to download DA to baseband chip's internal SRAM!

Possible reason:

1. There's an UART communication problem between FlashTool and BootRom.
2. Target might be shutdown unexpectedly.

[ACTION]

1. Try again.
2. Proceed H/W checking in download cable and target side UART path.
3. Monitor if power-drop occured in target side.

.....................please explain me what is the problem..I am newbie..

Thx Tkowsar..

[nasagih]

forgot to write....

The indicator of MTK is still stopped at 76%...same as spiderman..
Sorry with my baD english.

Tx

[kallima]

I having a problem in china s3 phone shows headphone symble no mic and audio please send tracks to my mail ganesan.gnsh@gmail.com please help
me thank's in advance:eek:

[ahmed2004]

i need flash tc500+
thanks
flash this model +c1000/c1000+/c6000.....)

[Unknown®]

If you want help these details are required for wanted flash files or we cant help sorry:

(A) Phone name (all name, because china phone have on front 1 name and under battery have another name)

(B) Phone cpu type and model (exm: MTK6226, infineon 7880, spd 6600M, etc)

(C) Phone flash chip type and model (exm: Samsung K5L2731cam, toshiba tv0057, etc)

(D) Phone original flash file version (exm: ROMINFO : v04 WT26_05C_PCB01_GPRS_MT6226_S01.S600_352_2731_MO4K_ SSD1289.BIN)

B.R

[AZIM_IND]

HEY BRO need flash file for n75 panasonic plzzzzzzzz help
Target code=[6226]HW(8A02)
Nor FLASH dev
Nor FLASH SIZE=0X01000000(16M)code=00EC 257E 2508 2501
NOR FLASH:(SAMSUNG)K5L2731CAM
thanks in advance

[Anghel132]

Hello there!

I've bought a T200+ (KTech/Tellit etc)

I've put many mp3 files on the TFlash card but when I look at it on the phone only 27 show up! But I know I put more there.

Also, can anyone tell me exactly what specifications are required for the MP4 movies on this phone?

What is the frame rate, frame size and format?

[Anghel132]

Also -> (Sorry to double post)

Is there anyway I can change the font of the display? Or change the theme etc?

[honolulu]

i have 2 sigmatel S3 handfree signal plz help

pinky_electronics@rediffmail.com

[Unknown®]

i have 2 sigmatel S3 handfree signal plz help

pinky_electronics@rediffmail.com

Sorry ı dıdınt undersatnd your problem clearly plz explain it more.

B.R

[onieboy]

china mobile model k915+ gprs setting

[ahmed2004]

(A) Phone name (all name, because china phone have on front 1 name and under battery have another name)
tc500+
(B) Phone cpu type and model (exm: MTK6226, infineon 7880, spd 6600M, etc)
I know how phone type Fuda central processing

[kanhan]

Please send your problem here, I can help you to solve the question of software and hardware of Chinese phone

U99 China
Do U have bluetooth U99 pinout plz sand me its urgent

[alnawaz987]

i have pocket pc mobile when i power on mobile he err:

err:audio ver:
r888_320_6680_inf_hy128_v2.2
expected ver:
r888_320_6680_inf_hy128_^v2.2

please tell me how to repair it i have spiderman box

thanks

[erfan_karim]

hi i have n73 musical it is not formatting by both infinity or hk ebox.by the way i formatted many of n73 phones

[hyd9885118583]

hi i have s1 sigmatel insert sim problem
s3 with error message
any help

[tkowsar]

Dear sir,

This is MTK FlashTool v3 popup window when trying to reD FLash :


Error : S_BROM_DOWNLOAD_DA_FAIL(2004)

[H/W] Fail to download DA to baseband chip's internal SRAM!

Possible reason:

1. There's an UART communication problem between FlashTool and BootRom.
2. Target might be shutdown unexpectedly.

[ACTION]

1. Try again.
2. Proceed H/W checking in download cable and target side UART path.
3. Monitor if power-drop occured in target side.

.....................please explain me what is the problem..I am newbie..

Thx Tkowsar..

forgot to write....

The indicator of MTK is still stopped at 76%...same as spiderman..
Sorry with my baD english.

Tx


1. for low power source (use full charge battery or power supply)
2. for tx rx not connect properly
3. phone have short (V+/B+ and GND is same)
4. bad cpu (need to re-hot cpu)

try and post result.

[nas4real]

good day, i have china phone n95 8G it is indicating head phone while head phone is not inserted, as a result of these the phone has no sound completely

[nas4real]

is these a short circuit or ...i need assistance svp

[tkowsar]

hi i have n73 musical it is not formatting by both infinity or hk ebox.by the way i formatted many of n73 phones


what cpu have in this phone?

[tkowsar]

is these a short circuit or ...i need assistance svp


read this and post again-
http://www.gsmhosting.com/vbb/showthread.php?t=567883

[AZIM_IND]

HEY BRO need flash file for n75 panasonic plzzzzzzzz help
Target code=[6226]HW(8A02)
Nor FLASH dev
Nor FLASH SIZE=0X01000000(16M)code=00EC 257E 2508 2501
NOR FLASHSAMSUNG)K5L2731CAM
thanks in advance

[romano76]

i would like to know how to build my own cable for my p168 iphone.

i know there are boxes could help me. but i only own 1 phone so buying a box would just be a waste of money, it would be better if i bought another phone instead of a box, may even be cheaper.

by the way i aresy know the rx and tx of my sellphone.

[taffman1taffman]

i have bought a chiya pda mp3/mp4 digital phone on e bay uk is it possible to get this phone opened up to take an o2 sim card

[InfinitySupport]

i have bought a chiya pda mp3/mp4 digital phone on e bay uk is it possible to get this phone opened up to take an o2 sim card

You must know phone CPU chip name.
If this phone is MT62xx CPU based you can unlock it with one button click f.e. with Infinity-Box.

[InfinitySupport]

i would like to know how to build my own cable for my p168 iphone.

i know there are boxes could help me. but i only own 1 phone so buying a box would just be a waste of money, it would be better if i bought another phone instead of a box, may even be cheaper.

by the way i aresy know the rx and tx of my sellphone.

If you are professional you must buy good tools with support so you will be able to ask questions from professional support persons.
You can see detailed instruction how to build your own cable for Infinity-Box here: http://www.gsmhosting.com/vbb/showthread.php?t=342807 (http://www.gsmhosting.com:80/vbb/\"http://www.gsmhosting.com/vbb/showthread.php?t=342807\")

[InfinitySupport]

hi telemaster,i need your help wt my n99i dual ,firts its only hung-up problem,after i format using infinty now only white screen wt letter that i cant understand.....


Just type *#0044# or *#001# without sim card and you you will see text in English.
You can see more keyboard codes here: http://www.atm-box.com/index.php?id=utilities (http://www.gsmhosting.com:80/vbb/\"http://www.atm-box.com/index.php?id=utilities\")

[InfinitySupport]

try with these br, may your problem will solve-

Nice to see files from Infinity-Box installation attached in this thread ;)
Thanks to you for Infinity-Box support !

[InfinitySupport]

Pls help me . . .
I have got Sigmatel S3 phone . . .
My phone contacts are getting deleted once in 3 days when i try to change the battery and my profile is also getting resetted automatically . . . . could i pls get a solution for this ?

In most cases this means that your phone has some kind of hardware damage. I suggest you to reball flash and CPU chip.

[jhef214]

DUDE, I have a Question were can i find PC SUITE FOR CECT Q380 Iphone?please help me I need a Free download for that or you can email me in my yahoomail here jffryting@yahoo.com.....thank you dude.Please help me dude in my problem thank you again.because I want to use my china iphone to my PC to use as a browser in the internet or as a internet connection.I beg on you.

[frnd_4_gsm]

THE CHINESE TELSDA T088 CAMED FOR RESTART AFTER FORMATING IN SPIDERMAN GONE WHITE LIGHT IF SOME ONE HAVE OK OR READED FLASH FILE PLZ SHARE

CPU:- MTK6226

MODEL LOOK LIKE THESE

http://rapidshare.com/files/133516958/telsT088.jpg.html

[frnd_4_gsm]

Model Look Like These

[xxolaa]

help ZXN95 1*12 socket pinout MT6225
http://kepfeltoltes.hu/view/080730/DSC12_www.kepfeltoltes.hu_.jpg

[rgfelipe]

i bought awang a9000i tv phone,mtk6228,is it possible i put windows mobile 6???

[Unknown®]

i bought awang a9000i tv phone,mtk6228,is it possible i put windows mobile 6???

Not possible with anyway.!!

B.R

[asheezz]

hey,
ive got a zt 866 dual sim phone, whenever i turn it on the display hangs then it restarts. i cant press any keys during this time and the touch screen doesn't work. do i need to flash thins phone.? and if so what are the necessary files needed

[the_planetrider]

I have an iphone clone p168c with chipset MT6225A can i flash it or not because i bought china editor 2.2 and i cant connect phone to flashtool inpossible



is there a tutorial?


thx

[lallyviji]

hello friend china mobile network ok no income no out going

[taffman1taffman]

Sorry ı dıdınt undersatnd your problem clearly plz explain it more.

B.R
how will i find the cpu name on fone

[mobile0786]

chiniese model cect c600 cel phon- all keypad r not working but cell is going on-off

[Unknown®]

how will i find the cpu name on fone

Just open your phone and see the top of cpu that will write there like Mtk, Spreadtrum, Infenion, Skyworks etc.

B.R

[Unknown®]

chiniese model cect c600 cel phon- all keypad r not working but cell is going on-off

I need more details to help you about your set.Example:is your keypad connected to pcb by flex or by connector etc.But simply open your phone check if anything is shorted or clean the keypad connector with good cleaner and post result.

B.R

[patcom23]

Hi I need some help with my dead ciphone.
I really need flash file that support Thai and Chinese and some more language? My current file's UFO318_B_BOOTLOADER_V005_MT6230_APL216_V1_1_200805 30.

Thanks for help?

[FELIPE21]

i have a cect c7000+ and im unable to connect to the internet
how do i go by setting it up

[hosny salam]

china mobile tethin c1000+ has a very limited menu options and a primitive arabic languge display. also it has unknown supported game files. it can identify nes files but cann't play it.even when i tried to install mp4 file format , it replies that this file is unsupported. could you explain what is the prpblem with this bad primitive unkown device. sent two messages to manufactured company but no reply. thank you.
dr_hosny2003,
egypt.

[khanmobiles0003]

sir
how i can spay any phone please give me the complete and best solution
thanx in advance

[kungpaoski]

Hello mates. Need I-phone CECT Q380 schematic diagram. thanks in advance. I have here keypad problem.Anybody have solution for this? Only power, 7,8,9, keys are working. The others are not functioning. Thanks in advance.



b.r.

[Unknown®]

Hello mates. Need I-phone CECT Q380 schematic diagram. thanks in advance. I have here keypad problem.Anybody have solution for this? Only power, 7,8,9, keys are working. The others are not functioning. Thanks in advance.



b.r.

Hello!!

Schematic is not avalibale at the moment but, if you explain your problem with more details ı mean tell me about your keybord connector type is it connected by flex or connector ı will try to help you.

B.R

[rcsum]

pls help i need pinout of my mp4 6188 can u?

rcsum

[AZIM_IND]

HEY BRO need flash file for n75 panasonic china model plzzzzzzzz help
Target code=[6226]HW(8A02)
Nor FLASH dev code=00EC 257E 2508 2501
Nor FLASH SIZE=0X01000000(16M)code=00EC 257E 2508 2501
NOR FLASHSAMSUNG)K5L2731CAM
plz some one have help

[preetpal103]

i have sigmatel v88 pls tell me how to install firmware in it in detail my email is its_me_preet@ymail.com thnks

[RAVICELLCARE]

I Have One Bluetooth A828 Model Hand Set Its Master Sim Works Normal But Slave Sim Have No Network Bar On Display ,i Serch At Manual Mode It Says Sim Network.but Any Calls Out/in Comming This Slave Network.i Formet The Set At Veepro Box. What Is The Problem Tell Me.thank U Brother

[Unknown®]

I Have One Bluetooth A828 Model Hand Set Its Master Sim Works Normal But Slave Sim Have No Network Bar On Display ,i Serch At Manual Mode It Says Sim Network.but Any Calls Out/in Comming This Slave Network.i Formet The Set At Veepro Box. What Is The Problem Tell Me.thank U Brother

Try too full flash set with orjinal version and also are you sure you format second cpu ?if yes also plz check second imei number.

B.R

[ttk7]

looking for mt6225 drivers; didn't find in the search.
TIA

[nacino]

Chinese Phone Charge Himself

[Unknown®]

looking for mt6225 drivers; didn't find in the search.
TIA


Check here and enjoy dear;)

http://www.gsmhosting.com/vbb/showthread.php?t=563091

B.R

[challangesenthi]

my i phone is + & - is dead shot any soliution plz friends

[renz0982]

iphone q380 problem on keypad any solution?

[preetpal103]

pls tell is their vibrater in this phone and where
and how to change menu look in this phone
like in nokia we can change themes what about chinese sigmatel v88

[jhef214]

GUYS help me were can I find the PC suite for my CECT Q380 Iphone?I want to get the PC suite for this can you give me a site for this?that no need to pay anything but free download only?please help me guys.I need PC SUITE FOR Q380 Iphone for free download.or email me in jffryting@yahoo.com

[jhef214]

Any PC suite for CECT Q3870 for free download?can you tell me about the site?Please help me about this matter. thank you in advance hoping that you guys can help me.or you can send here in my email jffryting@yahoo.com

[RAVICELLCARE]

I Am A New User Of Veepro Box. How To Formet 2 Cpu Kindly Tellme .or Any Site To Gaidup Video Avilable To Veepro Box Kindly Guide Me .thank U Brother

[ttk7]

Check here and enjoy dear;)

http://www.gsmhosting.com/vbb/showthread.php?t=563091

B.R
Thanx for the reply.
I have seen that thread before but it does not have mt6225. It has mt6227 & mt6228.

Are both of them compaible with mt6625.
TIA

[yogesh_prj]

insert sim problem in cect v180 china model,
plz tel me

[mwitamasiaga]

Please send your problem here, I can help you to solve the question of software and hardware of Chinese phone

please friend i need pin out 6300 rh 37 pin7

[AZIM_IND]

I Have A China Cell My Proplem Is When I Receive A Call The Phone Atomatically Starts To Recieve The Call
I Have Flashed The Phone But Still The Same Prob ................pllllllllllllz Help If Some One

[asishaker]

hi zhanglei5556 thanx for the topic (http://www.gsmhosting.net/vbb/member.php?u=233259)
i have cect a88 and it dosnt have or supports arabic language
where is the problem and how can i fix that

[shamim ahasan]

zhanglei5556 boss.please gavi me vmi video Converter.Email:tarek0831@yahoo.com

[tlnadar]

Zhanglei5556 Sir i have requsted u to post all china models codes.which is the best chines flashing software

[zhanglei5556]

please friend i need pin out 6300 rh 37 pin7


check 2.1-2.7V .If not ok.u can detect by CPF-BOX2.that's very easy.:p

[zhanglei5556]

hi zhanglei5556 thanx for the topic (http://www.gsmhosting.net/vbb/member.php?u=233259)
i have cect a88 and it dosnt have or supports arabic language
where is the problem and how can i fix that


pls post detials with the model.and i think i can help u found a flash file.but i don't ensure the flash file have arabic lang.;)

[zhanglei5556]

zhanglei5556 boss.please gavi me vmi video Converter.Email:tarek0831@yahoo.com


u can download in www.phones-china.com (http://www.phones-china.com) there have many many Video converters:)

[zhanglei5556]

Zhanglei5556 Sir i have requsted u to post all china models codes.which is the best chines flashing software


If u can open BIN file,u can found ,MTK cpu codes not the same.u can open BIN file by WINHEX and search *#06#.then u can see all codes in there.now i use CPF-BOX2.this is a new box.just released.it's a very strong box.and the box can set universal cable,then can flash other phones.no only Chinese phone.but support Chinese phone is best inthe world.

[Raa_z]

I have a china mp 4 or 5,it on but not properly.we pest some video file on games folder
after pestling it could not on properly,when on dispelled only Loading........... so help me pl z.

Loading...........

[Unknown®]

zhanglei5556 boss.please gavi me vmi video Converter.Email:tarek0831@yahoo.com

There is many many converters in this forum just use search button.

B.R

[chalbi]

search for n82 new pin out

[Unknown®]

search for n82 new pin out

To get your correct pinout ı need these information about ur set:

Phone name and model

Phone connector type and how many pins it have

post ur set two side and very clear picture.

B.R

[patcom23]

This is my CiPhone FW. http://rapidshare.com/files/134060995/CiPhone_MTK6230.rar.html
After I flashed. The phone's dead. I Thing the FW problem. Please help.

[prassana]

Sigmatel S3 in Headset mode..... Plz Help

[Unknown®]

Sigmatel S3 in Headset mode..... Plz Help

Hello!!

First try to format your phone,if doesnt help second open your set try to clean headset connector or change it.

B.R

[mithon]

Please send your problem here, I can help you to solve the question of software and hardware of Chinese phone

w16 charging problem & data remove whit can i do...

[zhanglei5556]

Sigmatel S3 in Headset mode..... Plz Help


Check CPU.good luck to u.

[m c care]

i have chinese mobile in which i changed display after that set is powered on but display not working. i tried flashing via VE Pro still no progress thanks in advance

[Unknown®]

i have chinese mobile in which i changed display after that set is powered on but display not working. i tried flashing via VE Pro still no progress thanks in advance

Probaly display fault or your mistake when changeing lcd try to check it up cleary again.

B.R

[soloman67]

hi there I have a china mobile tk228gd wm5 all networks in uk work except o2 which is the network I need can you help to explain why it does not work vodaphone works fine and is the same bandwith so the phone should be compatable o2 cannot explain why either

[Nacon]

I have a Suny Ericssun M666 mobile phone and my PC can't see it! And also, I don't have the driver. Can You help me please with a PC driver for this phone? Thanks!

[mondy]

okay dude i have anycoll c2000 dead phone and not booting with software i would think it's jardware problem any help please

[preetpal103]

diskfull problem in sigmatel v88 while transferinf file from bluetooth

[goherabbas]

please send me zt588 pinout thankss in advance

[mobile0786]

a chiniese cell phon is dead its not boot with infinity n spiderman box . can u give me a gud solution.plz help

[mobile0786]

i have a chinies cell its show a logo of handsfree n there is no any sound , how can i solve dis problem .plz help

[gowthamsekar]

Hi,
Please tell me, i am connect to the internet via GPRS A898 china phone. Give details

yours
gowthamsekar

[muhammad ali]

please Send Your Problem Here, I Can Help You To Solve The Question Of Software And Hardware Of Chinese Phone


Please Helpmy For This Phone File.
My Phone N95 1sim Made In Finland Rm17
Cpu Mt6226ba
Ic Flash Spansion 71pl127nb162635

162636

162639

162640

162641

[muhammad ali]

i found this same pic withmy n95 phonesRM17 &already download this phone file
but still decrypted fail=>continue=>result=> my N95 phone still white screen.but sound ok.i use spedirman crackV2.188
please help!!!
162643

162644

162645

162646

162647Please send your problem here, I can help you to solve the question of software and hardware of Chinese phone

[jainmunda]

i got sl88 phone which is working good it has 6225a cpu but after wrong charger set is dead any tell me what to do in that case

[the best clr]

insert sim problem in cect v180 china model,
plz tel me
maybe CPU problem re**** CPU ...


good luck :)

[moestly]

[b]first I d like to introduce myself; hallo to everybody here!

my problem is like description in the titel. my phone had the following Hw and SW Version:

HW V: YG718_M6225_V1.0
SW V: YG718-03-SIV 100ASIV100B-IPHONE-EN12-BTNO-900-V007

I don t know if its it a hard or software fault? so I upgraded my firmware to cect p168C DUAL SIM.

HW & SW V: YH718-None-EN1_900-HW_V1.3-SW_V002

Unfortunatly "mono" again. Then I tried "format" with a GSTAR-GM328 flashcable. It did not function either. After that I tried cleaning the output connector. Did nt do it also!

When I connect the phone with pc via USB cable, and open an audiofile

with e.g. vlc player, the output is stereo!

Anyone a solution to this problem?

[sameer918]

Hello sir,
when i try to read flash or eeprom mctool gives error. Please help....
> Cyberflex Access e-gate 32K
> Box S/N : 821902-FFF2DB
> Box Port detected on COM-5
> Box Version : V1.0 - Dec 02 2007
> Current Box settings:
> RX: 5 TX: 6 GND: 10,12 VCC: 11
> Ready to use...
[ 17:00:56 ] [--- Operation Started ---]
[ 17:00:56 ] Press and keep power ON button...
[ 17:00:57 ] Phone detected : MTK CPU
[ 17:00:57 ] Preparing phone for boot...
[ 17:00:59 ] Release power ON button now!
[ 17:00:59 ] CPU Platform : 8A03-6225
[ 17:00:59 ] Loading bootloader...
[ 17:01:14 ] Bootloader loaded OK!
[ 17:01:14 ] Getting flash chip details...
[ 17:01:39 ] Flash chip ID : 002088C4 [00000000]
[ 17:01:39 ] Chip Name : Unknown
[ 17:01:39 ] Flash chip size : [ 0x01000000 - 16MB ]
[ 17:01:39 ] Chip block (0x00) : 1000 * 1000
[ 17:01:39 ] Setting parameters...
[ 17:01:40 ] Initializing phone`s RAM...
[ 17:01:41 ] RAM initialize OK!
[ 17:01:41 ] Detecting EEPROM area...
[ 17:01:43 ] EEPROM area detected : 0x00CB0000 - 0x00FFFFFF
[ 17:01:43 ] Reading EEPROM data...
[ 17:01:43 ] Unknown Error : 0x000
[ 17:01:43 ] [--- Operation Aborted due to an Error! ---]

[bsy6882]

Hello sir,
when i try to read flash or eeprom mctool gives error. Please help....


You can try another box to flash it

[lilv101]

hi i master reset the fone and now when i start the fone up chinese writing cums up and thats it i cannot acces anything and there is a black backgroung thats it plz help

[gagan001s]

Please send your problem here, I can help you to solve the question of software and hardware of Chinese phone



insert sim in china mobile plz send me sol. :confused:

[wangda]

OK!
Zhanglei5556(Tel:+086-21-63532609)!
Thank you very much!

[jamilshaikh5887]

hi brow i have n95 china slider phone phoone showing auto charge help me plz brow

[muhigirwa]

Why my phone N95 won't access my phonebook and it said slave initialing on the screen ?

[smartcoll1]

i have problem with phone ZTC s508.phone is dead after i take sim card,now phone can`t start up.how i get software to flash phone without use flasher box? n what cable i must use to flash phone? help pliss.. :confused:

[himo]

how to full flash china phone;)

please sent raselsarker@live.com

[unnikrishnan]

I want to china SL88 flashfile

[msantar]

please see my problem.here:
http://forum.gsmhosting.com/vbb/showthread.php?t=575668

thank to help.

[hotjayu03]

Pls Sir Help Pawan Model No 2225 Pin Out Rx Tx

[NguyenLinh]

I have a phone Suntek S2229 ( TV mobile , mp3 , mp4, 2 sim, 2 card) my phone locked :( help me by tool unlock for it Thanks

[inforicky]

Hello everyone, my name is Ricardo I do Brazil, bought a Chinese mobile n99i, must change the firware, I have actually 2 appliances, need a backup device and install in another. which program to use to make that change?

[KOBOL]

after try to change imei speadtrum c1000+ dead and don't flashed too. her log can anyone help my

"Spreadtrum Boot Block version 2.0
Loading the boot file to RAM...
Loading SC6600R_FDL11.bin
Waiting for Spreadturm 1st bootloader ack...
"Spreadtrum Boot Block version 1.1
Loading SC6600R_FDL21.bin
[DA] SC6600R bootloader running
Loading C1000+_bkp.bin.000
Loading C1000+_bkp.bin.001
error occur when send file
Can't load OS image file!
[STK] Close COM44 success!

[zhanglei5556]

after try to change imei speadtrum c1000+ dead and don't flashed too. her log can anyone help my

"Spreadtrum Boot Block version 2.0
Loading the boot file to RAM...
Loading SC6600R_FDL11.bin
Waiting for Spreadturm 1st bootloader ack...
"Spreadtrum Boot Block version 1.1
Loading SC6600R_FDL21.bin
[DA] SC6600R bootloader running
Loading C1000+_bkp.bin.000
Loading C1000+_bkp.bin.001
error occur when send file
Can't load OS image file!
[STK] Close COM44 success!


u need check hardware and try flash it by CPF-BOX2

good luck

[zhanglei5556]

Hello everyone, my name is Ricardo I do Brazil, bought a Chinese mobile n99i, must change the firware, I have actually 2 appliances, need a backup device and install in another. which program to use to make that change?

I think this very easy with CPF-BOX2.:)

[zhanglei5556]

I have a phone Suntek S2229 ( TV mobile , mp3 , mp4, 2 sim, 2 card) my phone locked :( help me by tool unlock for it Thanks
i think your phone is MTK or SPD cpu.u can read all lock code by CPF-BOX2.

[mayur7781]

chaina sigmatel t55 ma hand free simbol aave che

[KOBOL]

phone work fine, he dead after change imei bro. not need hardware check. i try whit cpf-box when i bye ;)

[Wallace G. Dias]

Hello I'm Brazilian and bought a cell of china MT6227. but do not come with idoma in Portuguese, someone could help me. How do I post a picture of it?

[jainmunda]

chaina sigmatel t55 ma hand free simbol aave che
http://gsmhosting.com/vbb/showthread.php?t=576185

[Unknown®]

chaina sigmatel t55 ma hand free simbol aave che


First try to format your set if doesnt help open your phone clean camera connector or try to change camera.

B.R

[Wallace G. Dias]

As I attached a picture here?C:\celular1.jpghttp://C:\celular1.jpg

[inforicky]

I think this very easy with CPF-BOX2.:)

:confused:please, I do not know anything about cell, I could explain how is it done? where do I get this program? help me please. thanks:confused:

[inforicky]

please, I do not know anything about cell, I could explain how is it done? where do I get this program? help me please. as I have done only by USB cable and the door of communication?
THANKS

[tripio2000]

hi, i have bought an N96 1:1 clone from china, my problem is that tha phone cant catch any network "no service" on the display. I have tried with 2 diferent operators SIM, and cant doit work.
Please anyone help me !

[kcspp2002]

I have chinnese mobile and now contacts in phone are abput 300. please let me know how I can take backup for my phone numbers on computer . Is there any software so that I can connect through computer and take backup. Please mail me at kcspp2002@gmail.com

[sigamani]

Please send your problem here, I can help you to solve the question of software and hardware of Chinese phone
hai brother i have ZTC T88 ringing sound very slow ,i changed many ringers please helpme.................

[zhanglei5556]

hai brother i have ZTC T88 ringing sound very slow ,i changed many ringers please helpme.................


hi u need change a ring IC.

[tripio2000]

please zhanglei5556 i need your help on my question !! contact me at tripio2002@yahoo.com.ar
thanks

[: ronfreek :]

please help me fined the solution for x-one a windows mobile based phone
which is hang on windows mobile logo have to flash the phone but dont know how and what to use for that
need your help
thank you
br.ron

[FurqanJavaid]

how i put games in china mobile 6500A?

[FurqanJavaid]

how i put games in china mobile 6500A?

[Boytom555]

This forum is very good & Thanks.

[amol_sm]

I have problem with Bluetooth A5 model. Which all keys not working.
Also i change working Keymate from another phone. But not done.


What i do for this phone......?
Thankx in advance.
:p

[chei]

hi i recentry bout a tithan c1000+ duo sim mobile phone and i have problems loading music in my phone,please provide me with the drivers for the phone.

thanks in advance[/quote]

[princce786]

i have problem with chinese phones i want to format or flash phone in spider man but msg shows upgrade to the latest version then try again what to do sir pls reply

[shivamobiles]

:eek: I Hava Sigmatel T33 Camera Not Warking Plz Help

[KOUSALYA]

HI..

I AM USING TELSDA ZTC T 58 MOBILE ..
LIKE THIS SAME MODEL CECT V 180 MODEL PHONE..
SPECIFICATIONS ARE 1.3 MEGA PIXEL CAMERA, DUAL SIM, DUAL CAM IS

THIS IS DUAL SIM AND DUAL CAM GSM PHONE..
BUT MY PHONE ALL FUNCTIONS WORK PERFECTLY...
AND I AM USING VERY CAREFULLY..

AND I DON'T HAVE ANY MANUAL ABOUT MY MOBILE...

MY PROBLEMS ARE ...
I HAVE RECENTLY FACED TWO PROBLEMS...

MY PHONE DESKTOP SCREEN IS VERY CLEAR AND VERY BRIGHTFULL, ALL OF O.K...... BUT

1. VIDEO BRIGHTNESS IS VERY POOR..:confused:

IF ANY 3GP/MPEG4 SONGS AND ANY MOVIES WANT TO SEE IN MY PHONE NOT COME IN BRIGHTFUL PICTURE..IN VIDEO PLAYER OR ANY??
.. LIKE IT'S COME LOW BRIGHTNESS CLARITY.. CAN'T SEE PERFECTLY.

LIKE ITS COME VERY DULL .. LIKE DARK NIGHT PICURE,
CANNOT COME BRIGHTLY...

HOW CAN I ADJUST BRIGHTNESS ..??????
HOW CAN I ADJUST CONTRAST..?????

PLEASE SOLVE THIS PROBLEM FOR GOOD PICTURE QUALITY..

PLEASE SOLVE THIS PROBLEM...

AND MY 2 ND PROBLEM IS :

IF ANY *.GIF IMAGES RUNNING SLOWLY..IN WALLPAPERS/SCREEN SAVER MODE IS VERY DEAD SLOWLY MOVING..

LIKE IT'S START AND STOP .. MOVE AND STOP. MOVE AND STOP... LIKE THIS RUNNING SLOW RUN GIF IMAGES...

HOW CAN I SOLVE THIS PROBLEM...

http://www.interweb.in/other-brands/2765-dual-sim-phone-ztc-t58.html

MY PHONE SUPPORTS SPICE MOBILE CODES..
*66* MODE AND ETC...

PLEASE SOLVE THESE TWO PROBLEMS FRND..
I AM VERY UNHAPPY FOR MY MOBILE VIDEOS...

I AM WAITING FOR YOUR HAPPY REPLY...

[Unknown®]

:eek: I Hava Sigmatel T33 Camera Not Warking Plz Help

Be sure phone is not in flight or headset profile, and try to clean headset connector if doesnt help change it.

B.R

[cellocoelho]

Please ...
I need the driver of COM PORT of my MTK6225 ....

HELP ME

[preetpal103]

can any body tell me that how to set screen resolution of sigmatel v88 . black layer is appearing on 3 ends upper ,left. right.i mean to say that screen width and height has reduced with black layer when i apply any wallpaper then it is surrounded by black layer

[preetpal103]

can any body tell me that how to set screen resolution of sigmatel v88 . black layer is appearing on 3 ends upper ,left. right.i mean to say that screen width and height has reduced with black layer when i apply any wallpaper then it is surrounded by black layer

[KOUSALYA]

Hi..
WHERE IS YOUR REPLY SIR.
Iam Waiting For Your Reply.....

I CAN UPLOAD MY MOBILE PIC ALSO
PLEASE SOLVE MY POST..
BRIGHTNESS COMPLAINT ..
PLEASE REPLY ONLY SOFTWARE SIDE ...http://gadgets.in/images/listings/product/large/mobiles/handset/ZTC/Dual_Sim_Phone_ZTC_T58.jpg

WHY BECAUSE I DON'T KNOW HARDWARE... AFRAID OF MY MOBILE...
IM WAITING FOR YOUR REPLY...

[asishaker]

pls post detials with the model.and i think i can help u found a flash file.but i don't ensure the flash file have arabic lang.;)
thanx for answering
version MAUI.06A.W06.40.F1
BRANCH 06A MTK6226_06A
BUILD TIME 27/04/08

[frnd_4_gsm]

can any body tell me that how to set screen resolution of sigmatel v88 . black layer is appearing on 3 ends upper ,left. right.i mean to say that screen width and height has reduced with black layer when i apply any wallpaper then it is surrounded by black layer


try to flash with other flash file or press *### and try display setting

[frnd_4_gsm]

:eek: I Hava Sigmatel T33 Camera Not Warking Plz Help

try for all sigmatel handset *### go to fifth opption and then second

[MANfaith]

please help me........
i formatted a china mobile with " CPU: MT6223 " and

" chip: 0011:EDB3:000C " ......... after the process it not working.. anybody give me one solution please.....

[MANfaith]

please help me........
i formatted a china mobile with " CPU: MT6223 " and

" chip: 0011:EDB3:000C " ......... after the process it not working.. anybody give me one solution please.....

[MANfaith]

please help me........
i formatted a china mobile with " CPU: MT6223 " and

" chip: 0011:EDB3:000C " ......... after the process it not working.. anybody give me one solution please.....

[frnd_4_gsm]

please help me........
i formatted a china mobile with " CPU: MT6223 " and

" chip: 0011:EDB3:000C " ......... after the process it not working.. anybody give me one solution please.....


give full details about handset which model ,what happen before flash,give picture of handset....etc!!!!!!!!!!!!!!!!!1

[vinayakpot]

how flash china phone

[MANfaith]

please help me........
i am a beginner in mobile servicing........
i formatted a china mobile with " CPU: MT6223 " and

" chip: 0011:EDB3:000C " by using infinity BOX......... after the process it not working.. i mean totally dead.
There is only showing " PDA " on the mobile and a bluethooth sign .

"""" identification#1 structure: 2nd [standard] generation
identification#1 protocol ver: 04
ver. sw1: K600SBYH_PCB01_GPRS_MT6223P_S00.K600_43A_V1_0_1.BI N
ver. sw2: K600_43A_V1_0_1, 00000000
ffs offset/size: 00C00000/00400000
detect device identification#2...
detection phase #1..

The red indicated text i copied from the file named as " operation " from the location--C:\Program Files\InfinityBox\ChineseMiracle.
anybody give me one solution please..... i am in trouble ......help me

[meta-llica]

plz help i forget my iphone password v1.1.4

[vinayakpot]

is thr any code to format

[KOUSALYA]

HI..

I AM USING TELSDA ZTC T 58 MOBILE ..
LIKE THIS SAME MODEL CECT V 180 MODEL PHONE..
SPECIFICATIONS ARE 1.3 MEGA PIXEL CAMERA, DUAL SIM, DUAL CAM IS

THIS IS DUAL SIM AND DUAL CAM GSM PHONE..
BUT MY PHONE ALL FUNCTIONS WORK PERFECTLY...
AND I AM USING VERY CAREFULLY..

AND I DON'T HAVE ANY MANUAL ABOUT MY MOBILE...

MY PROBLEMS ARE ...
I HAVE RECENTLY FACED TWO PROBLEMS...

MY PHONE DESKTOP SCREEN IS VERY CLEAR AND VERY BRIGHTFULL, ALL OF O.K...... BUT

1. VIDEO BRIGHTNESS IS VERY POOR..:confused:

IF ANY 3GP/MPEG4 SONGS AND ANY MOVIES WANT TO SEE IN MY PHONE NOT COME IN BRIGHTFUL PICTURE..IN VIDEO PLAYER OR ANY??
.. LIKE IT'S COME LOW BRIGHTNESS CLARITY.. CAN'T SEE PERFECTLY.

LIKE ITS COME VERY DULL .. LIKE DARK NIGHT PICURE,
CANNOT COME BRIGHTLY...

HOW CAN I ADJUST BRIGHTNESS ..??????
HOW CAN I ADJUST CONTRAST..?????

PLEASE SOLVE THIS PROBLEM FOR GOOD PICTURE QUALITY..

PLEASE SOLVE THIS PROBLEM...

AND MY 2 ND PROBLEM IS :

IF ANY *.GIF IMAGES RUNNING SLOWLY..IN WALLPAPERS/SCREEN SAVER MODE IS VERY DEAD SLOWLY MOVING..

LIKE IT'S START AND STOP .. MOVE AND STOP. MOVE AND STOP... LIKE THIS RUNNING SLOW RUN GIF IMAGES...

HOW CAN I SOLVE THIS PROBLEM...

http://www.interweb.in/other-brands/2765-dual-sim-phone-ztc-t58.html

MY PHONE SUPPORTS SPICE MOBILE CODES..
*66* MODE AND ETC...

PLEASE SOLVE THESE TWO PROBLEMS FRND..
I AM VERY UNHAPPY FOR MY MOBILE VIDEOS...

I AM WAITING FOR YOUR HAPPY REPLY...


please help me..
solve this problem please.........

[soloman67]

hi can you help my china mobile will not work on 02 network in uk but can use vodaphone tmobile and orange is this a software issue ?

[Unknown®]

is thr any code to format

No code for formating on china phones at the moment only way useing box/device or free tools.

B.R

[Unknown®]

please help me........
i am a beginner in mobile servicing........
i formatted a china mobile with " CPU: MT6223 " and

" chip: 0011:EDB3:000C " by using infinity BOX......... after the process it not working.. i mean totally dead.
There is only showing " PDA " on the mobile and a bluethooth sign .

"""" identification#1 structure: 2nd [standard] generation
identification#1 protocol ver: 04
ver. sw1: K600SBYH_PCB01_GPRS_MT6223P_S00.K600_43A_V1_0_1.BI N
ver. sw2: K600_43A_V1_0_1, 00000000
ffs offset/size: 00C00000/00400000
detect device identification#2...
detection phase #1..

The red indicated text i copied from the file named as " operation " from the location--C:\Program Files\InfinityBox\ChineseMiracle.
anybody give me one solution please..... i am in trouble ......help me


Did you get fully backup before your action if yes just full flash your phone if no ı will try to give you your flash file.

B.R

[Unknown®]

plz help i forget my iphone password v1.1.4

Is your iphone chinese branded ı think you are in wrong section go to iphone section and post your problem there.

B.R

[baloo2000]

Is this phone ?I hope to photo information.
http://rapidshare.com/files/46154797/OK_U8800.rar
pls help me with nokia 6300 camera module not ready
thanks

[vanityspell]

Please send your problem here, I can help you to solve the question of software and hardware of Chinese phone
Hi,where can i download games and app;ications for my A8+ touchxcreen phone?:confused:

[Unknown®]

pls help me with nokia 6300 camera module not ready
thanks

Try to format your set first if doesnt help open your set clean camera connector or change camera module.

[Unknown®]

Hi,where can i download games and app;ications for my A8+ touchxcreen phone?:confused:

Use search button already posted many many times.

B.R

[muraliomega]

i need bluetooth jd2008 firmware

[Unknown®]

i need bluetooth jd2008 firmware

Post full details about your original firware version and cpu type.

B.R

[SARFUDINJ]

hai my s3 phone "camera modul not ready" is it eny sollution? pls help me .:(

[frnd_4_gsm]

hai my s3 phone "camera modul not ready" is it eny sollution? pls help me .:(

already told at page 161 press *### go to fifth opption and then second

[amebaa]

Hi Mte,

This is AmebaA New member, then i have Sigmatel T99 Chinaset , the problem is where can i download the games for that.

pls help me

[cellocoelho]

Please...
I need the driver for MTK6225 COM PORT....PLEASE
HELP ME

[arys64]

Good day to all.. I bought my CECT L821 and I am very happy with the phone. I could be happier though if I could change the music player skin. Anyone has an answer to that?

[nice2meetu]

I need the software for Tethin c100+ to reset the mobile,it stopped working only after 1week use :(
thanks alot for ur support

[sandeep246426]

Please send your problem here, I can help you to solve the question of software and hardware of Chinese phone
sir v88 handfree problel c/c ok.

[maqbool9195]

Please send your problem here, I can help you to solve the question of software and hardware of Chinese phone
plz send china phone reset codes

[hp_mobile2002]

Please make it clear you need something OK?
you can post file flash E90 mt6226 BA

[wilsonm]

Please send your problem here, I can help you to solve the question of software and hardware of Chinese phone

Thanks for all

I need the software (Installation Cd)to set the GPRS of the mobile Tethin C6000+ to connect internet with the computer.

Best regards

[virsingh]

hi have n958 and nktel 2800
both of these give meno service when i insert my sim card
it wont connect to the network

[cellocoelho]

Please, someone help me?
I need driver's COM PORT for my MTK6225 ....
HEELP MEEE

[idbl_fanatic]

I just got a CECT A88, and the bluetooth sucks to say the least, I get nothing but static on it, with any headset I use, I have turned the blueooth off, and back on, re-paired the headsets, same thing. What can I do? I even got a new Jawbone II headset same thing.

[poolgoso]

hi to all members.. can you help me about my n95 china dual sim..
the problem is,, NO POWER.. i tried software solution,,i tried format and flashing, then it works..sometimes i can used it about 5mins something,, then he turn in off again,,still no power again.i think the unit less in supply.i think this problem can solved by hardware solution,can u give the whole schematics of this unit?? specially in the back up battery,co'z i think there something problem on the back up battery.. can u help me??plss i need the schematics.. hope your responce of my problem.. i need your help members.. goodluck to all of us.

[m c care]

Originally Posted by zhanglei5556
Please send your problem here, I can help you to solve the question of software and hardware of Chinese phone

i have chinese mobile every thing ok but no display , i have change display but still not working plz need help

[Unknown®]

i have chinese mobile every thing ok but no display , i have change display but still not working plz need help

Try to full flash your set with oriiginal firware version probaly it will solve your problem.

B.R

[Unknown®]

hi to all members.. can you help me about my n95 china dual sim..
the problem is,, NO POWER.. i tried software solution,,i tried format and flashing, then it works..sometimes i can used it about 5mins something,, then he turn in off again,,still no power again.i think the unit less in supply.i think this problem can solved by hardware solution,can u give the whole schematics of this unit?? specially in the back up battery,co'z i think there something problem on the back up battery.. can u help me??plss i need the schematics.. hope your responce of my problem.. i need your help members.. goodluck to all of us.

İts hardware problem , carefully rehot cpu ;)

[KOUSALYA]

HI..

I AM USING TELSDA ZTC T 58 MOBILE ..
LIKE THIS SAME MODEL CECT V 180 MODEL PHONE..
SPECIFICATIONS ARE 1.3 MEGA PIXEL CAMERA, DUAL SIM, DUAL CAM IS

THIS IS DUAL SIM AND DUAL CAM GSM PHONE..
BUT MY PHONE ALL FUNCTIONS WORK PERFECTLY...
AND I AM USING VERY CAREFULLY..

AND I DON'T HAVE ANY MANUAL ABOUT MY MOBILE...

MY PROBLEMS ARE ...
I HAVE RECENTLY FACED TWO PROBLEMS...

MY PHONE DESKTOP SCREEN IS VERY CLEAR AND VERY BRIGHTFULL, ALL OF O.K...... BUT

1. VIDEO BRIGHTNESS IS VERY POOR..

IF ANY 3GP/MPEG4 SONGS AND ANY MOVIES WANT TO SEE IN MY PHONE NOT COME IN BRIGHTFUL PICTURE..IN VIDEO PLAYER OR ANY??
.. LIKE IT'S COME LOW BRIGHTNESS CLARITY.. CAN'T SEE PERFECTLY.

LIKE ITS COME VERY DULL .. LIKE DARK NIGHT PICURE,
CANNOT COME BRIGHTLY...

HOW CAN I ADJUST BRIGHTNESS ..??????
HOW CAN I ADJUST CONTRAST..?????

PLEASE SOLVE THIS PROBLEM FOR GOOD PICTURE QUALITY..

PLEASE SOLVE THIS PROBLEM...

AND MY 2 ND PROBLEM IS :

IF ANY *.GIF IMAGES RUNNING SLOWLY..IN WALLPAPERS/SCREEN SAVER MODE IS VERY DEAD SLOWLY MOVING..

LIKE IT'S START AND STOP .. MOVE AND STOP. MOVE AND STOP... LIKE THIS RUNNING SLOW RUN GIF IMAGES...

HOW CAN I SOLVE THIS PROBLEM...

http://gadgets.in/images/listings/product/large/mobiles/handset/ZTC/Dual_Sim_Phone_ZTC_T58.jpg

MY PHONE SUPPORTS SPICE MOBILE CODES..
*#66* factory MODE AND etc...

PLEASE SOLVE THESE TWO PROBLEMS FRND..
I AM VERY UNHAPPY FOR MY MOBILE VIDEOS...

I AM WAITING FOR YOUR HAPPY REPLY...frnds

any one solve this problems experts also..

[medo_nio]

hi bro , i have "MT6225" chines mobile phone , i need to know it's defult securty code plz

[medo_nio]

hi bro , i have "MT6225" chines mobile phone , i need to know it's defult securty code plz

srry made bad color :((

[mega21]

plz help me china phone cect 1800 no audio......

[jacked]

can you me help change the built-in message tone in 5310 (clone), please?

[vsbalapure]

Hi,
I have chinies IPhone clone G60MTL mobile, i liked all the available features but i need to install some softwares which will work on my phone, can you please let me know any site from wher i can get the softwares.
I also need PC-Synchronization software for the same.

Please help.

[vickytozer]

i bought a phone off of ebay and i am having problems with it. all it says is it is a cect phone. my first phone is set in chinese after setting it back to factory settings. and the second phone doesnt let any sim cards work. i believe it is locked.
please can yu tell me what model it isfile:///C:/Users/Tozers/Pictures/phone.jpg and how can i fix it. i hope the pictures works.file:///C:/Users/Tozers/Pictures/phone.jpg

[vickytozer]

i have 2 phone first one has this inside of it. cect s560 ime number 358639000112898 sn s5600602011205 and on the side it has a blue sticker saying 02-7163-070421 cect s560 pox98poc14t9x40, im not sure what these mean. this phone is not a cect s560 i looked it up on the net and it shows a totally different phone. it does work but is set to chinese, and i need to set it back to english and there is no place on this phone that says language settings. i ave taken it to a chinese shop and they looked and said the samething. the next phone is locked or something my sim card wont work, called my provider and they did the ime number and said it was the phone. in side of this phone it says cect ime 354565002548657 and it has the numbers 24560 on it nothing else.
please can you help me.you can see the phone on ebay, im not sure how to put a picture of it on here,
vickyhttp://cgi.ebay.com/Unlocked-Touch-Screen-PDA-Cell-Mobile-Phone-Camera-P8_W0QQitemZ200245926796QQihZ010QQcategoryZ3312QQs sPageNameZWDVWQQrdZ1QQcmdZViewItem

[m c care]

plz help needed , i have chinese 5310 cpu 6226 after flashing with ve pro set is dead , i had tried orginal flash file also, but still same problem, some body plz help me out i am in great trouble

[nabil_alg]

i have n95 china slider phone phoone showing auto charge help me plz

[nacino]

Chinese Phone Auto Charge Solution Please

[m c care]

i have chinese 5610 cpu 6226 after flashing set is dead , i had tried orginal flash file also, but still same problem, some body plz help me

[akskbn]

Sir, I have a problem with my China N800 as I insert sim card phone is shows doual sim is switch and phone restart and shows insert sim again so sir i didn't understand what is problem mean hardware or software please help me

[murthyy]

hi bro , i have "MT6225" chines mobile phone , i need to know it's defult securty code plz

default user code is 0000,1122,1234,3344

[murthyy]

plz help needed , i have chinese 5310 cpu 6226 after flashing with ve pro set is dead , i had tried orginal flash file also, but still same problem, some body plz help me out i am in great trouble

what was the problem before flashing was it restarting or what if yes then try other flash file
try reheating cpu

[akramkhawaja]

i make new softwar for chines nokiA N95 PUT THE PROBLEM the toutch screen does not work ?
where is the problem

[thyagu2k]

sir 6680 camera feature not supported help

[bazor]

hi i bought a nokia 8800 sirocco gold original from china but when i put my sim card into the mobile and i on the phone no network ,after sometime it appears on the the screen sim registration failed.can you help me pls

[ziplip]

Hi, have n95 8gb china slider phone, i belive cpu mt6227. The problem is that the phone does not recognize the internal memory and also when i connect it to the computer does not recognize the usb mass storage. Also any chance to put the italian language???? ...... PLS HELP.

[dharmendra.dps]

i want to active mobile office setting on my china mobile(model is sigmatel s4)

[dharmendra.dps]

i have china mobile , i want to active mobile office settting
mobile model-sigmatel s4

[m c care]

what was the problem before flashing was it restarting or what if yes then try other flash file
try reheating cpu
before flashing the problem is no network

[i.anas]

any one cleare my doubt my chines nokia n95 sliding Two rx and tx

1) rx a and tx a

2) rx b and tx b what is 2 rx and tx ? how to connect the INFINITY BOX RX AND TX


ALL BROTHER'S THANKS ADVANCED

[tharsan]

i have problem LCD (ecran) for nokia 5610.

[saifali]

yeh im very happy today i have solution for badsoftware problem

[saifali]

hi every body i need help in bad contact charger and ear peace mode

[frnd_4_gsm]

any one cleare my doubt my chines nokia n95 sliding Two rx and tx

1) rx a and tx a

2) rx b and tx b what is 2 rx and tx ? how to connect the INFINITY BOX RX AND TX


ALL BROTHER'S THANKS ADVANCED

just put the cable to rxA and txA ------- one rx-tx(one pair in simple language:D)
or
put (solder) to txB and rxB------------(second pair);)

[anglianman]

I have an L821 with an almost completely unintelligible manual. Can anyone tel me:

(a) how to lock the keypad? Ive tried 1122 and although it says 'phone locked' it isnt
(b) how to connect it to my mac so I can download/upload files from my micro sd card
(c) it doesnt see to read any opf the files from my old micro sd that was in my Nokia N95 - when I click on the file name is says 'folder empty' it wont play videos or mp3's

Any help very gratefully appreciated!

[m c care]

Please send your problem here,of china phone!

--------------------------------------------------------------------------------

Please send your problem here, I can help you to solve the question of software and hardware of Chinese phone

have u got the picture of sky cpu plz help me

[i.anas]

sigmatel S1 white screen
plz help me sigmatel S1 white screen after flashing

fail ver GINWAVE25_06B_PCB01_GPRS_MT6225_S00_1_.FXD-S1-ML_MR106_006_5S01-MC-C01-RF3198_V1_0_017_080226_Sigmat


plz post tested fail & solution

why is phone white screen ?

[mobile0786]

i hv a chiniese cell phone its showing handsfree on display no any sound. can u post me a proper solution at mobile0786@gmail.com

[shaha.iphones]

ihave a prblm in sigmatel s2 in handsfree mod

[eli_avitan]

There is a package of languages that includes Hebrew for mm95?

[jamesnogra]

hi... i have an n95 china phone... it is still 69% free space but everytime i took pictures... it says "disk full". i tried to add songs via usb, it still works... only the pictures... please e-mail me the possible cause and solution at love.gerald@gmail.com... you can also visit me at http://www.friendster.com/babydesertwolf... please...

[rapperranking]

please i need password for my cect v600

[mohyzo07]

Please send your problem here, I can help you to solve the question of software and hardware of Chinese phone
please i very need your help for my phone chinese mpeg CECT with 2 simcard but there is problem of network with 1 simcard.please thankyou

[Nietz]

Hi xkuz me but my english is not fair.so i ve a chinese phone Tecno T880 when i connect with a pc it show mt 6227.my probleme is that when i tried to received data from bluetooth the connection failed and my phone restart.for this moment my phone start for few seconds and shut off.I restore it to factory but it doesn't work.Please help
Thank nietz@live.fr:confused::confused::confused:

[chinna44]

how to play games in ELECTRA M666 CHINA MOBILE :confused:

[keniyoung]

am using spiderman when i click seach phone with mtk(cpu2) it will fine cable but will not flash, will not format. eexample of phne is n72.

[frnd_4_gsm]

am using spiderman when i click seach phone with mtk(cpu2) it will fine cable but will not flash, will not format. eexample of phne is n72.


what the error give while formatting and flashing and what the problem is having in handset give full details?

[tkowsar]

any one cleare my doubt my chines nokia n95 sliding Two rx and tx

1) rx a and tx a

2) rx b and tx b what is 2 rx and tx ? how to connect the INFINITY BOX RX AND TX


ALL BROTHER'S THANKS ADVANCED

maybe your phone have 2 cpu. so here have 2tx and 2rx for both cpu.

tx-a and rx-a for first cpu
tx-b and rx-b for 2nd cpu.

so try with 1st cpu tx rx because its main cpu.

if your phone have 1 cpu, you can connect you phone with tx-a and rx-a.

[fufy78]

Hello,

I have pressed on high speed sim in the engineering mode on my ChangJiang A968 China Phone.

Now, the phone is dead....

I'm reading a lot of message in this forum, but , i'm a novice about it.

Flash the fimware, is the it final solution ?

Someone can help me about the software need (chinesemiracle, MKTtool, SpiderMan....) and the hardware/cable necessary for repair it?

Sorry, but software e hardware are a lot on this forum... a simple manual for a novice user someone can do ?

sorry for my bad english

Thanks, fufy

[zablon]

i have nokia n95 8gb or black one it show headset sign can u tell me what i have 2 do?

[amebaa]

Mate i have Sigmatel T99 handset, then i need games for it, pls post the games and instruct how to instal the games .



pls do the needful

[kkjhgawar]

Dear zhanglei5556 !
Hi, I have China Phone NKTEL C5000, which had option of webcam, the chip is MT6225 can you provide me any kind of help regading webcam driver for windows xp, and any flashing software for the model and how can i connect & flash the phone..? is it required any box or special cable. (not one which supplied by co) or company provided usb cable is enough... Thanks in advance

[anilkumargupta9]

Please send your problem here, I can help you to solve the question of software and hardware of Chinese phone

china mobile is not work key pad and screen touch

[asishaker]

thanx for answering
version MAUI.06A.W06.40.F1
BRANCH 06A MTK6226_06A
BUILD TIME 27/04/08

need new software if possible with arabic language support

[CiptaCom]

dear...

I need flash file ZTC zt268, pls


Thanks

Ciptacom

[1nehee]

I HAVE TRY DIFFERENT TYPES OF AVI CONVERTER TO CONVERT A FAT FILE TO AVI BUT IT DOES NOT WORK WITH THE CHINA PHONE THAT ITS VIDEO FORMAT IS AVI.

PLEASE HELP ME OUT WITH A GENUINE SOFTWARE, PLEASE.
THIS IS MY E-MAIL: 1nehee@gmail.com

NEHEMIAH.

[1nehee]

PLEASE HEAR ME OUT BROTHERS,

I HAVE TRY DIFFERENT TYPES OF AVI CONVERTER TO CONVERT A FAT FILE TO AVI BUT IT DOES NOT WORK WITH THE CHINA PHONE THAT ITS VIDEO FORMAT IS AVI.

PLEASE HELP ME OUT WITH A GENUINE SOFTWARE, PLEASE.
THIS IS MY E-MAIL: 1nehee@gmail.com

NEHEMIAH.

[k babu]

i have sigmatel s3 & sigmatel t33 in this two phone handfree mod problem can help me

[darkspyce]

Hi, I have emobile (anycool) t808 and I want to know how I can back up my contacts. I also am wondering why when someone texted me their name appears but when someone calls me, only their number appeared, even if they're saved on my contacts. any help would do. thanks in advance!

[stratus214]

need help with my I-9 clone
I have an I-9, and it just locked on me for no apparent reason. I tried the 4 default user codes you have listed on this site, but none of them have worked. I tried contacted the person i bought the phone from to see if he might have the code but he will not answer any of my calls or emails.

Is there another universal code i can use? or a way i can reset the whole phone? i tried looking at all that flash stuff you guys have on this site but i do not understand any of it, i have no experience with this type of stuff and i am completely lost... can any one help me? please

[shazrenda]

sir...i need for flash file for 6300 Q7+...NOR flash (samsung) K5L2731CAM.thanks...

[greenspan]

I found the USB and webcam drivers for MT6225 phones there: http://www.chinamanuals.com

[virsingh]

hi i bought 3 china phones from india
and brought them to usa
none of them connect to the network
please help me asap
pm would be great

[jhershee_143]

do you have driver for mt6225? where can i download that driver thank you! pls reply!!!!!

[bebertoap]

;)

HI.

First I must clear i'm a newbie here.

I bought a moible phone CECT S560.

It looks great but first i need the user manual.

Second : it would be great to find the french version of the firmware if it exists. For now I only have choice between english and chinese

Many thanks to help.

:)

[jhershee_143]

hello this is my first time here!
i have a tv phone, dual sim, the model is n99i! china phone. when i plug the usb cable and i switch to com port the computer needs the driver of mt6225. where can i get the driver of that phone thanks
pls reply thanks a lot!!!!!!

[MGauss]

Hello, my name is Miguel and I live in Argentina, this is my first post.

I buy a cell HiPhone A88 (MT6227) and is blocked,:confused: someone can teach me to unlock? Thank you.;)