Please send your problem here,of china phone!

[nasro38]

please help , i need pinout for n82i tv 18pin

[wendyn]

Please send your problem here, I can help you to solve the question of software and hardware of Chinese phone
i need to connect my phone to the internet

[wendyn]

my phone cannot see other websits apart from google help

[musai]

i have 2 mobiles and do not know the proper pinouts one is lovme Lm 398 and second is ztc yx 188.

[dk2008]

Hello help me i bought a ciphone with no usb driver please help and other progames if you have.
driver needed mt6229

[Nido_zafar]

Hi Buddy I have 1 cect u8800 key pad jack totally broken can u send me the print of jack
urgent needed

naveed_zafarpk@hotmail.com

[sandeep rudra]

china mobile ztc model t118 problem while receving call normal speaker no out put but as the handfree is switch on the out is heard speaker checked and changed ic used j80 .please help me

[kumbhar.bh]

sigmatel t99 insert sim

[france_dale01]

bossing i have hug celfon china not shorted but no power but when i press the keypad the backlight will response....how can i fix it?pls help me tanx

[amol_sm]

China v90 touch screen is not working. pls help me giving solution.



If it is MT62XX series then u can disable pen calibrate for start the phone.
If NO then u have to change the touch pad of the same type.




Post result.

[jetski-billy]

hi i have a leady mm95 and am currently on vodafone uk pay as you go

where can i find the settings to send/recieve mms messages please?

regards

scott

[jojo_ntm]

hi all .... i need help. i have a problem withe my nokia 1100 in the lighte

[sri000]

gsm (gprs) ZH898 china mobile input phone lock code plc....

[imran gee]

Please send your problem here, I can help you to solve the question of software and hardware of Chinese phone
all china mobile charge in mobile display charge bad connect please solution help

[heynela]

:confused:my C9000 has 2 different imei numbers. I am not getting any service and all the anycool codes that I have found on line are not working. I am trying to change the freq to 1900mhz, but I am unable to. Can anyone help?:mad:

[vish_7670]

I having problem with some china phone Phone is not connect with infinity pinfinder/ testpoint what will we do to connect phone any one know this problem please help me ?????????????????????????????????????????????????? ??????

[heynela]

I have t-mobile. I put the sim card in and I get "no service" on the screen. How do I change the band on the phone to match 1900mhz?:confused:

[THEPUNISHER2008]

I need help getting a Sunpa s200 to accept United States T-Mobile Network. It does not recognize the network, sometimes it says "emergency" other times it says "Network unavailable". It will not let me select another network. Per T-Mobile, the phone should work in the U.S. Any Suggestions??

http://cgi.ebay.com/1GB-TRI-BAND-DUAL-SIM-PDA-CELL-MOBILE-PHONE-UNLOCKED-A_W0QQitemZ360106926214QQcmdZViewItemQQptZAU_Mobil e_Phones?hash=item360106926214&_trksid=p3286.c0.m14&_trkparms=72%3A1205%7C66%3A2%7C65%3A12%7C39%3A1%7C 240%3A1318

[genius2005]

china Bluetooth N88 printout (Rx Tx) need. pls show the Printout.

Thanks

[sri000]

gsm (gprs) ZH898 china mobile input phone lock code plc....
send this Email sinivasmurthy12@gmail.com (sinivasmurthy12@gmail.com)

[IVANNXX]

Please send your problem here, I can help you to solve the question of software and hardware of Chinese phone
ineed unlocking box site to order from china . my email is ,iebconnections@mailbox.co.za . from south africa.

[IVANNXX]

Please send your problem here, I can help you to solve the question of software and hardware of Chinese phone
i am looking to buy unlocking boxes from china . looking for a link or a site. i am from south africa . thanks ivan

[NITESH CHANDAN]

Lcd ok but white model nk83 & spectdrum cpu & 2 sim any solution ?

[kachman]

gsm (gprs) ZH898 china mobile input phone lock code plc....
send this Email sinivasmurthy12@gmail.com (sinivasmurthy12@gmail.com)
what do you want us to send to your email?

[kachman]

Lcd ok but white model nk83 & spectdrum cpu & 2 sim any solution ?
bro if your phone uses lcd flex cable, try using another flex cable

[med elhedi]

please i need a eeprom for blaupunkt GMBH fiat ducato cc 7 643 319 316
bp431953879628
and thank you
my e-mail is medhedi.ncib@yahoo.fr

[robert1029]

i have a q380 china iphone..

the *,0 and # are working but not the number.


kindly tell me where is the keypad IC or any solutions that may help..

thank you in advance

and more power sir

[raj488in]

Hi There,
I have chinese model MT 6225 fone and am unable to connect this on pc since its asking for installation CD i was hoping to get PC Suite from here. Let me know if you can help with the same

Thanks,
raj488in


Please send your problem here, I can help you to solve the question of software and hardware of Chinese phone

[heynela]

I have the anycool. I have T-mobile and I am in the US. The person that sold it to me said that as long as I was on 900/1800/1900mhz freq, the phone would work. I put the sim card in the phone and it reads "no service". When I try to use the Manual Network option, it does not let me in. When I used the anycool code*# to get into the engineer mode, it only gives me "SS unavi.." message. I have taken it to every store, no help there. What so I do net?

[jackobyte]

i am looking to buy unlocking boxes from china . looking for a link or a site. i am from south africa . thanks ivan

I just bought a Spiderman box from sw-box.com

http://www.sw-box.com/spiderman-box.html

Hope this helps

[ekamil]

how can i remove camera module not ready other than s3 4 contac


ekamil@yahoo.com

[/\/\A/\/| DON]

Brother i have a chinese phone it say after some charging bad contact charging:confused:

[tomasek123]

Hi all
please I need help whit my chinese phone.
I not shure white model i user quide is Z998 and for phone is HT898 digital video tv 700. please I need usb driver and some software. I try usb driver and software from here but dosen`t work. help my please.
one more think if I conect cable to phone told me 2 way 1 is pc camera and 2 is USB but if I click to usb phone write me "please use Udisk when power down" I don`t know way? I`m so sorry for my english. please help thanks

[bokerrima]

I have i68+
All Java applications I installed on my phone,
restart when I run them. What can I do?

VERSION MAUI.GEMINI.W08.12
BRANCH:GEMINI
BUILD:BUILD_NO
SERIAL#:
MTO12345678901234567
BUILD TIME
2008/08/26 14:55

[empecinado]

Hi I have bought a V188 hiphone in china and now when I am in Spain I can see that the microphone does not work good. I have to shout because the person in the other phone can not listen to me. Can I change this microphone easily? Where can i bought a new microphone? can I used one from my olds telephones?
Thanks a lot for all
Hello I have not recived any aswer do you need more information?
empecinadocast@hotmail.com

[muthumathi]

plz send china a918 shorting problem heat in total board and full charge after 10 mts low battery problem plz solve my problem
and any diagram or image plz send it thanks in advance

[mabzak]

Hi just bought this phone off ebay from china supposed to be a windows mobile 5 and except java and other files but like most chinese phones it wont i have downloaded the correct driver and pc sync connects up fine untill you try to install java fail. fail. fail. I have read another thread about the flash memory being full can i access this memory and also why does the phone not look like your standard windows mobile all you can do is transfer movies,mp3 and pics through the mass storage connection apart from that its a nice phone shame I cant play games on it.

Any help with this would be great

Its a jinpeng E1680

thanks

[freshwhite]

I hve nokia chines 6500c chines no incoming calss at all i try to restore factory settinng to deactivate call barring no result now iwant to format the phne pls give me pinout

[SAKIYO]

N95 8gb rn159 & ztc tv200 pinout rx tx plz ,.,.,.,.,..,.,.

[raviyadav_del]

Hi,
This is ravi from new delhi, india
i have a nktel c6000 .
yesterday i tried its engineer mode by pressing *#110*01#
and i have selected its sim speed and changed it to high
after this the phone switch off in 5 secs
and now the phone is not restarting.
please help me
i am in a big trouble.

thank you very much

[kachman]

hi, get the boxes from www.gsmserver.com, good customer suport from these guys

[kachman]

Tomasek123...do this, disconect your cable from your phone...turn off the phone, now plug in the cable to ur pc then also conect it to your phone...dont switch on your phone while you do this, then after a few seconds, your pc should show found new hadware

[mobile_mania]

cect p9100 ok for some time after some time shows insert sim card

[kachman]

cect p9100 ok for some time after some time shows insert sim card

try putting a small thick paper between the sim card and the battery, and then put the battery cover back...post result:D

[jacktheone]

hello!
I've been reading your answers and I'd like to thank you for your effort.
I'd like to buy a N99i (chinese model). Every body is telling me that i won't be able to install nothing on it. are they correct?!
I'd like to install some dictionaries and if possible a PDF reader or any other sort of text readers on it . is it possible? and how??
please help me to take a disicion once for all!!

[dineshbasu]

IWANT TO CHINA MOBILE SIGMATEL S3+ PINOUTS :confused: PLEASE HELP :confused:

[jacktheone]

GREAT JOB BUDDY!
can we use it for n99i?
:confused:

[kachman]

can u use what for n99i?

[Mohan71]

Please send your problem here, I can help you to solve the question of software and hardware of Chinese phone


I have LXMobile X 189 phone. There are recorded viedoes. I copied them into my PC but cant play Because they are in .vid format. I used several converters but unsucess. Pl help me

Mohan

[rosan]

any bosy have the solution of chinese n95 mob that the problem is the mob work very propperly but after some time may be45min or 1hour the ph became insert sim in sim 1 and after slliding the ph it became emergency.if we turned off the ph and again on the ph it will work again and same problem

[mastema]

Hi, can you help me? I have entered into eng. mode. How do I raise the volume of the microphone? Other people do not feel me. I have i68+ sciphone.

[harryking55]

hi
my phone is locked and now i forgot the password and because i turned off the phone and then i turn on the and my was locked so could u tell me how to unlock the phone plz reply soon as u do ok thanks.

[segun01]

hi help me out my china mobile K1 auto power when insert batt and all key pad dosnt work. what do i do pls need assisstance

[dattatraya]

how i put games in china mobiles?

i wany a china mobile games

[dattatraya]

i want china mobile games plzzzzzzzzzz send me

[boywaly]

Please send your problem here, I can help you to solve the question of software and hardware of Chinese phone

Hello, thank you for all the answers which you give to people of the forum. I have a tethin c1000+ which does not want to be connected to the network. it's necessary insist for do calling and also as soon as I put double puce, it loses the network. I need your assistance please. Thank you.

[weric]

i have a mtkbt mobile phone or mt6225, i hope it's the same. i can't play java files or jar or jad files. please help

[kachman]

segun01, try deassembling your phone, then remove the plastic keypad and clean it with methylated spirit or thinner, then asemble it, good luck

[lenbytech]

PLs help me with a video tutorial on how to use spyderman box for chinese phones.thank you.

[DILIP_MKPKRB]

sir
tell me how can flash to chines mobile of infinty box and i have no extra adapter..?
please sir help me ..

[honest.global]

1 china n95 shows seaching wethout sim,even with sim.it does,t do like that bluetooth problem that trip off and off with sim card.sir pleace help,from ww.honest.global@yahoo.com

[weric]

hi how do i play java or jad or jar file games on my mt6225 phone? please help

[FasGsm]

PLs help me with a video tutorial on how to use spyderman box for chinese phones.thank you.


Search in forum already some tutorials posted.

[FasGsm]

1 china n95 shows seaching wethout sim,even with sim.it does,t do like that bluetooth problem that trip off and off with sim card.sir pleace help,from ww.honest.global@yahoo.com
Format ur set it will b ok but for safty read backup before formating.

[arnpruthivi]

Hai Brothers
Help ME Nktel C6000 insert card Sim tray ok please help solition

[drama_queen]

my Chinese cell is a TETHIN C1000+ When I try to dial any contact using the SIM that's in the first port it dials perfectly well but whenever I try to dial using my second SIM it doesn't dial:confused::confused:..It just says "call rejected" I tried switching the SIMs thinking that the problem might be in the SIM itself but it didn't work...I tried alot of different SIMs but I got the same answer ..every SIM that's put in the second port doesn't work so the problem is in the 2nd port itself...I think!! what can I do to fix this prob bec. it's really letting me down :(

[kleftakos]

Again a china phone with a couple of preinstalled games but I do not seem to be able to upload new ones... Why? Is the mt6225 semobi songlive compliant with java?

Thanks!

[kleftakos]

my songlive / semobi mobile phone does not play the games! Does it support java?

thanks!

[ttms]

Please send your problem here, I can help you to solve the question of software and hardware of Chinese phone
:)thanks in advance post here some hardware tricks and jumper tracks of chinese nokia clone models specially charging problems

[ttms]

hi
my phone is locked and now i forgot the password and because i turned off the phone and then i turn on the and my was locked so could u tell me how to unlock the phone plz reply soon as u do ok thanks.
:)u can unlock the phone with infinity or et box if u have one

[chandu4ever]

hi i m chandu from india i m using NKTEL 2800 china mobile please tell me how to install software like opera , player ,ganes on that mobile
please tell me for that what should i do. (which software or installer is needed 4 installing software on china mobile)

[maxmix]

Never buy any Chinese handset....

Still no one will help you 2 months later, I still have a usless piece of sh1t !

maxmix

READ HERE ! http://forum.gsmhosting.com/vbb/showthread.php?t=613871&highlight=maxmix

[Artangel]

how about N95 china phone.. when you turn it on, it will appear and hang in, Starts without Sim card? with an icon of midi upside...

[maxmix]

Hilarious this thread..... 5000 Questions with no helpfull answers for the normal person with no unlocking equipment....

Why post Q when you will get no answer lol I wait 2 months now..... :)

maxmix

[darshhot]

how can i do format my phone & how i know my flash my phone tethin c6000+

[mauritz1972]

hello bro thanks for your help in advance. I just bought a CECT K630i I wonder if there is any way to install third party software into it. I appreciate.

[pradeep.k]

Hello Friend Hi This is Pradeep From Andhra Pradesh (INDIA) I Want Solution As soon As Possible My problem is China Mobile NKTEL c5000 Headset Mode ,What I can Do Plz Help Me

[d_shane]

hi,,,i need the cam software for my chinese A968 na....can help someone to me ha?>
http://forum.gsmhosting.com/ubb/smile.gif

[philzfog16]

can some one let me know what a need to flash AMOI WP-S1 skype phones

[maxmix]

No one knows any of your answers.... Return all these phones for refund to China ;)

Only option....

maxmix

[durga_109]

Sir my mobiles is chaina a918 befor mobile is on after fromat&flash but st is dead my sofrware is veprobox any helpme sir

[idrisakyol]

thenk you usta eline sağlık

[micro_hsr]

sigmatel t55 head phone mode help me

[arisonaboy]

i have hang 6300 pls help me
:confused:

[kerwel]

A25_B_V2_L5_PCB01_GPRS_MT6225_S00.GEMINI_1_0.BIN
can iget this flash ineed it realy

[bahandari]

HI
bro i have a problem
with S10 camera module not ready
i m waiting for help
thanx in advance

[m_nobl]

please i have new n 82 with spreadturm Sc6600 and tere is no signal bar appears on the phone
I flash the phone with 64 mega flash file but still no signal
Can u tell me any software solutions
thanks

[Mr. Right]

Sir i have 2 problem,

1st:
When i put battery into chinese phone model C6000, its start atutomatically, there is no shortage,

and

2nd,

Another chinese mobile phone could not play movies because its movie player have been deleted or missed. So can you provide me chinese movie player exe file or other solution,

thanks and regards,

[rraza]

(file name)D8_C860A_ASIAN_PCB01_GPRS_MT6225_S00.SDT_R_D8 _CHR_C860A_ASIAN_V1_2A.BIN

modle no ztc588 only format set daad

plz flash file

asimraza_pk@hotmail.com

[m_prabhu9]

Hi China zh898 display trake digaram printout please

[frk39173]

hi ihave a china XTC Q2280 the phone was dead and i flashed it in SPIDERMAN now the phone is on but no display

[vinhhoa]

hi brother I need file flash mdole sampo GK6200 cpu 6226 flash spantion s71PL127J Rominfo
SZMI26_05C_PCB01_GPRS_MT6226_S01.SZMI26_05C_W0628_ S609PLUS_V4_6 .
pic here!
http://www.vietfones.vn/forum/showthread.php?t=34415
thanks all so much:confused::confused:

[enigma_sphinx]

Sir,

I need a PC suite for my Cect Q380 china phone, I would like to upload games. One more thing is that is there any firmware available for this type of phone or any updates that I can do with this phone. I have two icons on this phone that I can't use, I'm thinking if I can change the icon to something useful, something that will work. Thanks a lot in advance, really appreciate it.

[ciming]

你好！我是中国的，请问你知道teme 脚本吗？想了解下！3q

[asif123456789]

brother i need china files of model (Gaoxinqi n358)
plz hellp me

[howell]

pls help me with my N99i china phone it wont charge..
actiontaken: i clean the intrface but still no luck.. pls help me....

[Mr. Right]

where is the beginer of the this thread?

[turkkkku]

please give me a website to download a pc suite for baixing d95 (z95) please

[hamzawyforever]

n95 8g put - in the place of + when flash
phone now dead neeeeed hlp plz

[FasGsm]

please i have new n 82 with spreadturm Sc6600 and tere is no signal bar appears on the phone
I flash the phone with 64 mega flash file but still no signal
Can u tell me any software solutions
thanks
In software u need to
1=Format ur set

2=Rebuild imei

3=Flash it

If still same problem then try to repair in hardware.

[FasGsm]

Sir i have 2 problem,

1st:
When i put battery into chinese phone model C6000, its start atutomatically, there is no shortage,

Ist try to format ur set .



2nd,

Another chinese mobile phone could not play movies because its movie player have been deleted or missed. So can you provide me chinese movie player exe file or other solution,

thanks and regards,[/quote]

same ist try to format ;)

[FasGsm]

hi ihave a china XTC Q2280 the phone was dead and i flashed it in SPIDERMAN now the phone is on but no display

ist try to flash with another good flash file 2nd check ur lcd can b damaged.

[FasGsm]

brother i need china files of model (Gaoxinqi n358)
plz hellp me

Post ur mobile cpu name and file version.

[FasGsm]

how about N95 china phone.. when you turn it on, it will appear and hang in, Starts without Sim card? with an icon of midi upside...

Read backup and format ur set it will b ok Or post ur cpu name .

[FasGsm]

how can i do format my phone & how i know my flash my phone tethin c6000+

Check sticky threads or search in forum already many tutriols posted.

[FasGsm]

Sir my mobiles is chaina a918 befor mobile is on after fromat&flash but st is dead my sofrware is veprobox any helpme sir
Did u read back up of ur phone before format and flash.

[FasGsm]

i have hang 6300 pls help me
:confused:
Read backup and format ur set.

[saifali]

M260/M100/M1000/M1200/M2000 unlock code #20050209# + send
hi dear i want some help about sky sk1 and sk2 how to reset user code infinity not support is and also wnat pinouts for sk2 plz reply fast thanks

[pradeep.k]

Hello Friend I have Nktel C 5000 Headset Symbol Is Showing on Display What i can i do please Help Me

[pradeep.k]

Plz Send the Secret codes of all Chinese Models

[raulms]

Hi there,

I have a problem with my chinese mobile phone the i9 (quadband) with two SIM slots (iPhone Clone). My i9 was working fine with a mexican cellular provider (telcel). I was using it for more that 3 months, until I put a new SIM Card on it, and now I can not use it, it appear Invalid SIM and no way to make it work, I have also restored factory settings, but nothing happend....

can you please help me to fix my i9?

regards

[perdeky]

I have a Sunpa S200 and I am unable to connect to the Tmobile network. The message states Failed to register! The phone is unable to find any networks in my area. Can you help me get connected to the network.

[punithan]

Sir Sigmatel s4 pinout u:mad:rgent

[kiran]

hi
mobile prblem with short some pins in charging connector, we put charger mobile became dead.
I tried to read full flash with infinity , while press power button unable to read , but press and connect the infinity box pinfinder supply with out press flash reading . so power button not working . please give me solution in hardware section ....

regards

[mobile0786]

firstly change the charging connecter if problem is still then change cpu

[dimag11]

dear can u give me a solution for nokia 3600s camera on standby

[ameho0102]

bro
i have n 75 panasonio its network problem when i on the phone ist showing the network but not showing any network bar and then phone is going in emergency i also chang the ant switch but poblem is not solve any idea what can i do

[naveedgl]

china zt8866 tested flash file need

[sheen_sk]

i have n96 dual sim
356936020251653
N96a080705085


one sim invalid
plz help me be quick i am waitting urs positive good reply


0301-7770345
sheen_sk@hotmail.com

[munirahmad]

my chaina phone MDA touch system can not work

[munirahmad]

my chaina phone MDA touch system can not work
befor damage it is right but a day it is sleped fom me and sown on fursh help me thanks

[mercurymike]

do you have program and flash file for A8+ phone

[sashgraphics]

Hello all people, can perhaps help their me?
What is for a telephone? Is there software for the telephone and driver? What has it for an operating system? tells me which about this telephone, gladly also by email: abtuning@hotmail.de I still attached a few pictures, for identification.

Front http://www.bilder-space.de/show.php?file=03.12xRGPQr743cvk6Fx.JPG

Display http://www.bilder-space.de/show.php?file=03.12bCFLrpVQDmqJpxO.JPG

Keypad http://www.bilder-space.de/show.php?file=03.12iy8wJY6jkWCAp3i.JPG

Open http://www.bilder-space.de/show.php?file=03.12vilOZeyGFdlqSb4.JPG

Open2 http://www.bilder-space.de/show.php?file=03.1282Y93w6pRrh1MmV.JPG

Back http://www.bilder-space.de/show.php?file=03.12GScYLKu60kq3GMH.JPG

[smladenovic]

Please send your problem here, I can help you to solve the question of software and hardware of Chinese phone
Hi,
I'm from Serbia, and I'v got a Chinese mobile phone, which can't identify. It's look like Nokia N76 and have D6000 inside . Programs like MyPhone Explorer and Float Manager say that is a T838 , with MTK2 , I think OS.
Please send my idea for solution.
Sasa
smladenovic@yahoo.com
messenger

[BlaDe987]

Hello i have a Problem with my N96 Tv Fm Handy i have make a mistake and press on HIGHSPEEDSIM in Engineer Mode.I know i have killed my FW but i know this first after i kill it xD.So last solution i can make a new FW on it but there i have some Problems:
With Cable i need can i use to make a new FW on it the modificated Motorola C261 Ringtone cable? or must i use some other.
And Where i get the FW of this phone because i dont can put it on,and all Chips are have Aluminium Case over it. so i dont can check with CPU i have or Chips or so :( only can send the Link of the Mobile phone shop

[kykiske1885]

I have a china phone model: V9+i N99i (mobile tv). It just turned-on the "urgent mode". now i can't turn it off. The music player, tv, ringtone does not play because the "urgent mode" is turned-on. How do i Turn-off the "urgent mode"? Please help. Please email me at jm_jal8@yahoo.com :confused::confused:

[kykiske1885]

Zhanglei, please help. I have a chinese phone model V9+i N99i (mobile tv). I cannot turn-off the "urgent mode". The musicplayer, tv and ringtones does not play because the urgent mode is turned-on. please send me instructions on how to solve this problem. my email is jm_jal8@yahoo.com.
I hope you can help me. Thanks in advance. And also, if you have a copy of the user manual can you send me a copy. Thanks again..:)

Please send your problem here, I can help you to solve the question of software and hardware of Chinese phone

[lallyviji]

please send me cect k300

[portpat]

i want a driver mt6225 for my china mobile

[portpat]

send it to me if possible to piercebusta82000@yahoo.fr please.

[o0amir0o]

need flash file -Mc Tool-
Anycool
M500Z_05C_HW
E553_K5SMCHARAB.01.1_26S01
2005.04.12
MT012345678901234567 ver franch

[hdesign]

I need for 6226 driver. PC suite not works. I have a new LENK I900 ( like omnia i900). The version is:
SW:v.3
BRANCH:07B_V3.0 CT6254
BUILD N°:
BUIL DATE: 2008/10/22
BB CHIP:MT6226,E02
DSP PATCH:1.0
MSBOARD:CENON26_GEMINI_OB_HD
LANGPACK:VERSION0
CUTPACK:VERSION0

Thank you

[humb11luis]

HI

I have a P168C when i put a sim card it says INSERT SIM?

Any solution.

Thanks ??

[amol_sm]

I face restart problem in sigmatel S3.


When i put the battry phone on automatically power on & after that it show battry low phone is shut down.....& phone is off
But
After 3 - 4 second phone is power on automatically & after & after same procedure is started....:confused:



Anyone know where is the problem in hardware . . . :rolleyes:
Please share here ;)



Thankx in advance.
:D

[pedrojau]

Please send your problem here, I can help you to solve the question of software and hardware of Chinese phone

Hola, perdon por mi ingles, tu sabes donde puedo encontrar mas informacion sobre el telefono modelo JC666s marca Jing Cheng (chip mt6225), doble sim card y soporte TV, como se le instalan juegos, temas, que tipo de software hay para modificarle opciones ocultas, etc...

Este telefono no soporta aplicaciones java

Hi, sorry about my english...Do you know where can i find information about JC666s Jing Cheng mobile phone (mt6225 chip), dual sim card and TV support, how install apps into the phone, games, themes, ringtones, what kind of software are available to make modding on the phone, do you know what kind of games is supported by the phone...

This phone does not support java apps...is this truth...?

[youngtsitt]

i need urgent help i have a chineese k630i change the screen but i still dont get the touch screen part workin . somone told me i need to get it flash can somone tell me how to i only hav a usb cable is there any software out there to help me flash it bu usb . here is my address to tell me or post back as soon as possible ... outlawak47_@hotmail.com

[jinjean14]

hi bro do you have any solutions of iphone q380 short circuit it weakens the battery..
please help

[bobgals]

Previously, my computer detect my CECT Nokia 6300 Phone but now it don't. the message MASS STORAGE & COM PORT doesn't appear anymore in my phone. Instead, it says CHARGER CONNECTED? anybody can help me with this concern? thanks!

I already restore my phone to factory settings and i already check my computer regarding sharing but still it doesn't detect my phone and my phone doesn't detect my computer also. I already restart my phone including my computer but still no communication between my phone and my computer. The computer still doesn't detect my phone instead my phone detect it as USB Charger..

i need your help!

Thanks

[kadritelecom]

Please send your problem here, I can help you to solve the question of software and hardware of Chinese phone
phona canek karneke lia kya karna pade ga

[jhoxs]

hi mates i need a power key hints
for n78 dual sim

thanxs in advance.......

[sjni]

I face restart problem in sigmatel S3.


When i put the battry phone on automatically power on & after that it show battry low phone is shut down.....& phone is off
But
After 3 - 4 second phone is power on automatically & after & after same procedure is started....:confused:



Anyone know where is the problem in hardware . . . :rolleyes:
Please share here ;)



Thankx in advance.
:D

brother i have same problum i tink it s cpu problum rehot or rebal and befor rehot and rebal cpu u find resstinsr104 behind batrey coneter u find r104 chang it try ok (r104 joint 4 resstins)

[sjni]

HI

I have a P168C when i put a sim card it says INSERT SIM?

Any solution.

Thanks ??chek sim point first

[shahidur rahman]

china phone disply problem.there are some spot on display.spots are like raindrop.it is increacing day by day like lines.please give me the solution urgent.i am very concius about problem.help me brother.my e mail address is- shahidurrahman90@yahoo.com

[mercurymike]

i need reset code format code or something for A8+ touch screen dual sim card shake phone or how can i flash it with usb charger my problem is i listen to my music on my phone then i unplugged headset but headset never disconnected now its stuck on headset in user profile when someone calls i can only use hands free please help email spinningcaprice@yahoo.com if anyone can help

[FasGsm]

HI

I have a P168C when i put a sim card it says INSERT SIM?

Any solution.

Thanks ??

Ist format ur set 2nd resold sim jacket and area around it.If still same problem post ur pcb pic here.

[FasGsm]

I face restart problem in sigmatel S3.


When i put the battry phone on automatically power on & after that it show battry low phone is shut down.....& phone is off
But
After 3 - 4 second phone is power on automatically & after & after same procedure is started....:confused:



Anyone know where is the problem in hardware . . . :rolleyes:
Please share here ;)



Thankx in advance.
:D

In some cases, check C110, C111.R103.R104 --> 2nd rehot or reboll cpu.

[FasGsm]

i need urgent help i have a chineese k630i change the screen but i still dont get the touch screen part workin . somone told me i need to get it flash can somone tell me how to i only hav a usb cable is there any software out there to help me flash it bu usb . here is my address to tell me or post back as soon as possible ... outlawak47_@hotmail.com

Serch in forum already many threads about touch screen and free flashing,formating softwares.

[FasGsm]

hi mates i need a power key hints
for n78 dual sim

thanxs in advance.......

Mostly it is from cpu.

[jinjean14]

hi bro do you have solution bout the keypad problem of iphone Q380

[forkanmiah]

hi boss
i have chaina tgl . model no=n300i . speaker and ringer ok. ringer and speaker track is ok but i can not get any sound.
when i play fm radio then get sound. solved me quickly.

[vinod dahiya]

Please send your problem here, I can help you to solve the question of software and hardware of Chinese phone
pls send china theam vinod2u4u@yahoo.com

[Czechman]

Hello,
I am a begginer here... I have some question about my S603 china mobile. I have several problem, for example. If somebody calling me, I hear him nice, but he hear himself twice time. The other problems is, whem somebody send me photo using bluetooth i can't open file...open file fail (propably file is big). The same problem is, when I make photo with this phone, concretely picture size bigger then 320 on 240..... I thing it's must be software problem...Other problem i have with internet browser. When i would like join some pages, it's show me not supportet file types. Main vodafone pages working, other not...And the last problem is with MMS settings. I should send MMS, but when somebody send MMS to me, it not comes. I have to go to the internet and look at it here...I am from Czech republic...:D
I will be very grateful for every answer.
Ps: i am sory for my english

[DonPiargoExpert]

Hey whats up? just asking if there's a way to password protect the CECT i9 slider so atleast no one buy myself can enter and use my phone?
Much appreciated thanks.

[sanku]

http://forum.gsmhosting.com/vbb/showthread.php?t=629801


help me

[JHGA]

Hi, I need that someone please help me. I am a reseller of anycool an chinese phone in my country, and i have problem with anycool phones and cect because most of their modl do not sipport java, and when i try to navigate through internet all pages are in Chinese... PLEASE HELP ME THANKS

[mdashrafy]

Zt888 gp converter mp4 video not suported = help me plaisse

[mdashrafy]

Bluetooth tv mobile[/img] help me plaise............................................ .................................................. .................................................. ...............s

[patcom23]

Need Help with N95 8GB 1sim 2Camera CPU MTK6226 NOR S71PL256N
RATECH26_06A_PCB01_GPRS_MT6226_S01.A95_10_1_2T02S0 726.BIN

Thanks....

[FasGsm]

hi bro do you have solution bout the keypad problem of iphone Q380

Check here
http://forum.gsmhosting.com/vbb/showthread.php?t=563971

[FasGsm]

hi boss
i have chaina tgl . model no=n300i . speaker and ringer ok. ringer and speaker track is ok but i can not get any sound.
when i play fm radio then get sound. solved me quickly.

U try to format ur set?

ur set is in handfree mod?

[Andyjain]

Hii Friend's Can Any One Help Me To Solve Sigmatel S3 Hands Free Mode.....

[afaque]

Hello I have sigmatel T55 when I insert the sim card it restart I try to formate with infinity but it dont connect it go to directly on.pls help me

[InfinitySupport]

Hello I have sigmatel T55 when I insert the sim card it restart I try to formate with infinity but it dont connect it go to directly on.pls help me

Hello,

If phone can not be connected with Infinity-Box this means that you have used wrong pinout. Double check your cable.

Also here is Infinity-Box support forum: http://forum.gsmhosting.com/vbb/forumdisplay.php?f=425

[azhar014]

hi , i need mt6225 drivers if u have please send me thanks

[Ampulamaresima]

hy !
I have a getek mobile (tk806) and i want to know how i make data transfer whit usb cable... i don`t have any driver for pc to make this and when i connect the mobile to pc is appears on display (optimizer charger) and that`s all.. I want to get my music on card memory...what driver i need ? pls help me !

[Czechman]

Hello,
i am looking for any other user of this china cellphone...I have some problem a want to talk about this phone. Thank's

[Czechman]

Hello,
i am looking for any other user of this china cellphone...I have some problem a want to talk about this phone. Thank's

[manule]

need change language nokia 8600 china

help via jaf

[saycool.anand]

Dear sir,
Pls give me the solution for it.I have china s3+. I tried for full flash for china but the problem is same till. phone is dead.

Thanks in advance

SAJ_2008

[sagar696]

pls help me sir i want this mobile flash file
it's urgent for me

[rifponsel]

anyone have a reconnect charger solution with picture for chineese phone (TV mobile) please... :confused:

[spsapre]

HI,
I have a chinese cect V98 DUAL CDMA/GSM MOBILE the cdma sim card works fine but phone resets if i put a gsm card and starts all over again This happens frequently
pls let me know the problem

[tommazone]

hi could you please check this
http://forum.gsmhosting.com/vbb/showthread.php?t=646477

[ezeua]

Hi guys,

I have chinese TV phone. the model is TVK 8000

It does not work with fido or rogers. it gives error message
"NETWORK CONNECTION FAILED"
I suspect that the phone is not unlocked.

Do any one know how to unlock china phone??

PLease help!!!!

[oaks]

pls snd me the pinouts of 5310 chinaphones. tnx a lot bro....

[capsio]

Good morning to all participants of the forum.
I need P168c firmware version in June 2008, 2 sim, camera, bluetooth, triband 850 - 900/1800/1900, MTK processor 6225.
target code 6225 HW (8A03) SW (8A00)
Tanks

[titanic]

Need Help


http://forum.gsmhosting.com/vbb/showthread.php?t=647153

BR,

[punithan]

sir

phone=sigmatel s4
cpu =mtk6225
file=v04BOWAY25_GEMINI_PCB01_GPRS_MT6225_S00.S4_TO SHIBA_ETFIHAP_V030.BIN

for s4 i tried 4 to 5 files but all files the set was on but no audios white screen
pls send the file r good solutation

Regards
puni

[hershie_22]

Hi! Where can i download themes for a china phone?
How do you use PC Sync Manager?
Thanks!

[shazrenda]

my n77 china all keypad not working...need ur help

[Anantmalpani]

Hello,

I have formatting a Sprint mobile which model is: 7700; With MTK-Box. The result that phone is dead. That phone problem was 'Phone Code Lock", So what's wrong with me? Please let me know and I need solution. Please help.

wbr
sir format it with oter tool it will be ok

[jactheripper]

can someone plz tell me where ican find games and applications(mostly applications) for my Chinese Hantel HL phone..... and i would also like to know if there are any modulators for java....coz my phone supports only .nes format...................................... plz heeeeeeeellllp:)

[juliobernal]

Hi I get an INVALID SIM meesage on a sciphone i9 when using 2 SIMs, is there a fix for this?

[spam99]

the operating system in my a88 hiphone is corrupt as i can send and recieve text but cant ring out or recieve phone calls can anyone help

[hershie_22]

Hi! Where can i download themes for a china phone?
How do you use PC Sync Manager?
Thanks!
BuMp
I need big help here.. puhleez!
Thanks!

[zeeshan tayyab]

Please send your problem here, I can help you to solve the question of software and hardware of Chinese phone

bro,i have mobile which get off with sim, i format the mobile with infinity and spider,after that it is on blinking,
here is flashfile
,
Files\InfinityBox\ChineseMiracle\backup_security\s ystem_log_F5AA7B3A_E550P_Y2VIRUAR_E550P_GPRS_MT622 6_S01.01_1.BIN_E66B1FB3_20081213-180744.B0X.bin

[hershie_22]

can someone plz tell me where ican find games and applications(mostly applications) for my Chinese Hantel HL phone..... and i would also like to know if there are any modulators for java....coz my phone supports only .nes format...................................... plz heeeeeeeellllp:)

that's my problem too! Ahuhuh...

I wanna change the themes of my phone too...

[kabul]

plz help me urgent
plz send me (TECNO model:S669) RX.TX




thanks in advance

[ianblakeshack]

when I turn on the Hiphone the apple Logo comes out the menu appears , but when I touch the screen nothing Happens, and it's brand New

[harryking55]

hi its harry i have china phone i put the lock on the phone and i forgot the password and when restart my phone and the phone was locked and now i can't unlock the phone because i forgot the password so tell me wht i have to do plz reply me as soon as possible

[harryking55]

hi its harry i have china phone i put the lock on the phone and i forgot the password and when restart my phone and the phone was locked and now i can't unlock the phone because i forgot the password so tell me wht i have to do plz reply me as soon as possible

[sebY7676]

Hi, i have a MT6227, but it loose the signal frequently, in first 5 seconds, the call is ok, but after 5-10 seconds, my voice is verry slow.Please, help me.

[kachman]

hi its harry i have china phone i put the lock on the phone and i forgot the password and when restart my phone and the phone was locked and now i can't unlock the phone because i forgot the password so tell me wht i have to do plz reply me as soon as possible

read the code with infinitybox or multibox with padfinder

[freud04]

PLZ i need help for my nokia n95 8gb RM320, V10.0.021
when i connect it to PC via usb cable it switches off automaticaly and i can't make connection with PC to transfer music and so on.
can any one have some help, thanks in advance.

[quickgsm]

I'll share here all the pictures and the method, that can help you easily connect your China phone and more than that, Samsung, Sie, OKWap, LG, Innostream...can connect to PC, to flash, Unlock, Read, Write, Format(China Phone option only)

Prepare:
-01 USB cable, that has USB to Virtual COM card, using PL-2303, ARK3116S, or C261 USB Cable, that you have it with driver( These cables packed with some kinds of phone)
-01 RJ-45 port, that you can buy at Computer service or from a discard LAN Card or Net switch, or box, PC mainboard...
Doing:
For easy to explain, I'll use PL-2303. And to take all advantage of UFS cable kit, we make all kind of phone self-made Cables following UFS standard, so that, we can use UFS cable with this Virsual COM, like C19x Moto, 2xx Sie, 4xx Sie...
Solder RX, TX, GND as this Picture:

http://i125.photobucket.com/albums/p64/trinhtrung/USBtoUFS.jpg

All done of the main part!
For the other part(Connect to phone part), you can use Connector from USB cable of the phone, Die Charger to modify them, that fix the pinout, for example:
Cect-S560
Cect-Q618
Nokia-N73
Nokia-N83
Nokia-N95
Nokia-N730

connector_2x6_mini
1:
2: Vcc
3: Vcc
4: USB D+
5: USB D-
6: Rx
7: Tx
8: Gnd
9: HF ear
10: HF ear
11: HF mic

(Just care of RX, TX, and GND)

Then, using nutcracker make the male RJ-45 (Following UFS cable standard) for each kind of the phone. The result is here:

http://i125.photobucket.com/albums/p64/trinhtrung/China8Pin.jpg



Now, you can read, write, format MP4 China Phone, using your self-made USB to Virtual Com
Note: Somebody said, MTK tools can't run without MTK box! That is not true! It can run well, need no box, Just with a COM cable, or a USB to COM like that, you can run all Ver. Of MTK tool!
I'll add here some pictures of Phone connecting to PC through my self made cable, tomorrow, i'll take some of China phone connecting screen shot pictures! If you interesting, call at my site, it's an Vietnamese 4r, but you can post reques for China Pinout, flash file or any solution in English, I'll help you!

Here's the pictures:

Inno90

http://i125.photobucket.com/albums/p64/trinhtrung/Inno90_Flashing_Done.gif

SIE A65

http://img201.imageshack.us/img201/7610/a65tz4.jpg

SamE900

http://i125.photobucket.com/albums/p64/trinhtrung/UnlockE900_OK.gif


LG (Vygis cr**ck)

http://i125.photobucket.com/albums/p64/trinhtrung/LG1100.gif


OKWAP

http://img384.imageshack.us/img384/3984/readingokwapbf9.gif

I'll capture some China Phone connecting to MTK tools through this USB cable and post here soon!

Goodluck!






thanks good job !!!!!!!!!!!!!!!!!!!!!!

[Sagar Saha]

what is the devise i can flash or formet all china mobile set easyle?

[shashank bawa]

Please send your problem here, I can help you to solve the question of software and hardware of Chinese phone
I hav ztc999 chinese mobile it is not playing n e vedios or games

[shashank bawa]

Please send your problem here, I can help you to solve the question of software and hardware of Chinese phone
I hav ztc999 chinese mobile it is not playing n e vedios or games

[spider62]

i need a pc software for the cect 599 i search the net but i didn't find any and my pc does not recognize it automatically

[Walslayer]

Hello, I come up to my PDA Chinese problem. Not long ago I bought a PDA on e-bay. My problem is that it is in English, I would be in French, someone could help me. The PDA is branded "SAMSING" I think it is a vulgar copy. Behind the PDA is inscribed "netstream." Thank you for your help.

[ianblakeshack]

I just Bought Two Hiphone 3g , One of the phones is Fine , But the other One Is dead , Doesn't Charge , Doesn't Turn ON , What it Could Be , Please someOne , HELPP

[Rafhan]

Hello guy.. i really need some help abt chinese phones,
i having some chines phones.

"Flying69" can put2 sims and a micro sd, the problem is its getting auto aswer wile sombody call, its a big problem to me in my country (Sri Lanka) i fully searched but no any option in the phone.
so what can i do...

Please help.....

[france_dale01]

gudpm boss i have n95 chinaphone the problem is i drop it into the ground and thje power is corrupting can u give me a hardware pix solutiong tanx

[NITESH CHANDAN]

chaina cdma & gsm mobile
problem incoming voice in gsm ok but cdma no voice can any body sollution

[NITESH CHANDAN]

D120_A112_PCB01_GPRS_MT6227_S01.D120_A112_1_07_0.B IN]_20081215-120057.B0E.bin new flash file urgent

[gouseahmed4u]

i have bought sigmatel s4 model chinese phone and connected it with USB port and installed drivers MT6225 and working fine.
But how will i know that my phone supports with java application or not?
and how can i convert video files of PC (.dat,.mpeg,.avi,.wmi) to sigmatel S4 video player compatable version format? Please give me video converter software.
and recently i have downloaded game file with ".nes" format and copied in memory card GAMES folder and restarted and tried but the file is showing as file and there is no option to open it?

[NITESH CHANDAN]

D120_A112_PCB01_GPRS_MT6227_S01.D120_A112_1_07_0.B IN]_20081215-120057.B0E.bin new flash file urgent

[zeeshan tayyab]

need flashfile
\ChineseMiracle\backup_security\system_log_B9F3E38 8_E506_B27_PCB01_GPRS_MT6226_S01.00_0.BIN_19873E0C _20081216-140015.B0X.bin

[idoko]

please help me to solve my chinese phone problem.whenever i put a sim card into the phone,it will switch on to the level of nokia logo i.e hand shaking and immediately the phone switch off itself.but if there is no sim card,the phone will switch on without off.The model of the phone is nokia-N79.what can i do?

[mdashrafy]

TrueMpeg4 BLUETOOTH TV MOBILE MALTIMEDIA CONVERTER MP4 PLAISE... HELP ME

[mokter]

ZTC-ZT588 Chip Chipnuts C625 "Phone restart"
which tool flash the phone
How to flash & where found flash file????????????????????????????????????:confused:

[DoEds]

I cant connect my CECT iPhone Q380 to PC...Can u help me how to connect it?., Please... I really need ur help...
PM me ur help pls...

[arnpruthivi]

sIR,
Sigmatel S1 Phone Touch not work phone hangup i am flash Flash After Phone Dead ..........please help me......By Pruthivi. From
INDIA

[rudolfmelissa08]

i have placed a pdf file in ny f888 phone but it does not open nor read..can u help me?

[MARNIC]

hi sir! Im new here I need help on how to use spiderman crack using Jaf Box?? i really got no idea, even i follow the pinouts.,

[mohamedsamir_04]

PLZZZZZZZ zhanglei5556 HELP MPE I HAVE N95 MAD IN CHINA N59 SLIDER ONE SIM TEAM WANNA KNOW HIS PINOUT PLZZZZZZ

[wagonr]

sigmatel s3 camera module not ready pls help its urgent

[Drajad]

Please send your problem here, I can help you to solve the question of software and hardware of Chinese phone
Beyond B530 all key not working.
How to repair ?http://www.ponseljakarta.com/iklan/beyond/530.gif

[wxtroy]

n99i qui fait après formatage du carte mémoire insérer carte de stockage

[mercurymike]

Hope that the publication of the telephone when you pictures and models of the chip to here !

is there any codes to format a8+ also known as g60mtl

[Nietz]

Pls help me after flashing my Tecno T880 (mt6227) i can not reply with the sim2 and i cannot cancel when calling me.pls help

[tashirao]

Please send your problem here, I can help you to solve the question of software and hardware of Chinese phone

need master reset code of my china divice modle zt999
TIA

[tashirao]

pleas post any body master code of china mobile zt 999
thanx in advance

[danielmonro]

hello mate i have this chinese mobile ( GTmobile Q718 Mobile Phone, Dual SIM, 2.8" TFT, Touchscreen, 2.0 ) do u have any software for this mobile

[sklnh3ad]

Hi Zhanglei5556,
,
Could you tell me if there is any possibility to install games or other application on this mobile phone..BTW this is the photohttp://www.sourcinggate.com/images/big/12178403975Bally%20K28%2006.JPG?osCsid=873b5a2035c c3ee686c630e436a826b3.... I can't install any file as .jar, .jad, .sis or .nes - i suppose because i don't have neither java, nore nintendo emulator....The mobile phone is connected to the pc throughout pc-sync manager via bluetooth(I can send sms, see the files, the phonebook)...
Under Fun&Games section there is only one game - Mahjong(vsmj:confused::confused:)-I couldn't see what kind of file(I mean the extension) was that.... was this game installed with the flash? :eek:

Thanks a lot ...and keep up the good work

[firose]

Please send your problem here, I can help you to solve the question of software and hardware of Chinese phone

:confused:sigmatel s3 camera module problem

[eli_avitan]

There are Hebrew
Language
to leady mm 95?

[saifali]

i want full flash files for cect 828 pda

[azhar014]

Hi, Dear i need mt6225 drivers i search him alot but no ware i found
them u have mt6225 drives please send me i m thankful 2 u

azharali_014@hotmail.com

i waiting ur reply_
i have bought sigmatel s4 model chinese phone and connected it with USB port and installed drivers MT6225 and working fine.
But how will i know that my phone supports with java application or not?
and how can i convert video files of PC (.dat,.mpeg,.avi,.wmi) to sigmatel S4 video player compatable version format? Please give me video converter software.
and recently i have downloaded game file with ".nes" format and copied in memory card GAMES folder and restarted and tried but the file is showing as file and there is no option to open it?

[noslenfa]

hello... I have a CECT N99i and i have a problem that is my voice is changed randomly and sound like a robot when i'm speaking to someone. When this happens the H-Free that appears when everything is allright doens't appear in the right bottom side of the phone. Is there any solution for this? or anyone knows why this happens?
Tks and sorry for my english...

[sulaiti]

Hi
i have a enmac Q8200 phone problem is any keypad not working after switch on.
any solution please.

Thank you.

[amdadsab]

i have problem lg kg 195 no charge and warning batery

[amdadsab]

Originally Posted by zakiyyboss
Hello Friends
I have an N95 china made with 2 SIM card enable. But when i insert a sim card in it it start RESTARTING but when there is no sim card the phone operate perfectly. Please can you help me on that PROBLEM i think when i try to get the network then it restart...

Please help me ... if you can help me on that ISUUE!!!!

[pit22]

sorry my english is very bad.The dual sim phone Daxian X788 isa clone of other phone.when install games?and more things....

[laura_jaye]

i am also searching for MT6225.... please let me know if you find it.... will do same... thx

[ram.chow99]

flash files for mt6218

[saifali]

Please send your problem here, I can help you to solve the question of software and hardware of Chinese phone
I WANT TO FLASH MP4 PLAYER ITS HANG ON START AND ONE MORE PEACE IT IS DEAD HOW TO REPAIR THEM PLZ HELP ME:confused:

[olcayerda]

hello, chinese 8800 arte not charging. please help me? what can i do? thanks for answers

[RevATC]

I got a Lenk i900 today, and been trying and failling to install .cab files and such.. I can transfer stuff to it, but it just wont give me the option to install.. What am I missing?!

[TUNEPiPE]

Hi.. need info about jinke e100 china phone, can i put themes? how can i replace the message alert tone?? coz i only replace the ringing tone. where can i download software for this phone? THANKS!


Please send your problem here, I can help you to solve the question of software and hardware of Chinese phone

[afaque]

Hello sir,I have china 6300 when I start the camera it show camera module not ready.Video player & bluetooth also not working.Pls give me solution .Thanks

[lucky4bakky]

insert sim for china phone

[Red Blade]

I have a samsung F480 clone (Sanshaun F480) that I want to change language on. It has english and chinese right now but, I want to have swedish on on to. And how do I do if I want to put games on it?

Need help please!!

[mdakck]

Please help, we purchased a Dual sim Bluetooth Camera Touch PPA phone on ebay that originated from Hong Kong for our son for Christmas. It says it is GMS/GPRS and that it has been unlock for AT&T it says the brand is EDIT. The problem is it will not allow us to connect to the AT&T network, when it ask us to select a network and we choose AT&T it says unable to connect. What is funny is that we took it to the AT&T store for help and the minute we walked in the store it started working! But when we drive away it stops? Can you help? If so can you give us step by step instructions on how to set it up for him?

[virus_in_brain]

first thing first: thanks to all geeks of http://forum.gsmhosting.com

hi i have surfed through many forums & gathered som info.but stuck after finding pins ..i have attached file below.

Phone Model:Bossh D111(I know it sounds new one)
Cable:2x7 usb cable
conections:
________________
/ 1 2 3 4 5 6 7 \
| 8 9 10 11 12 13 14 |
----------------------
usb cale - Mobile Pins
balck(gnd) - 2
red(vcc) - 1
white(d-) - 14
green(d+) - 7
i think internal cpu or chip whatever u geeks tell it is MT 6218 bcoz wen i install driver PC tells me it is "umPhone" and 6218 modem driver is installed.when i simply connect it for data transfer it is recognized as "umPhone Flash disk 801d device"..so far pins of usb cable with phone connections found by me are below shown in images.

I have tried Spiderman and several other software but no success..

only one success till now :i can cahnge imei of my mobile
now i m facing problem of uploading iimage so will post in net reply

tHnKssss in advance

[JunioX]

Can anyone help me? a have this problem!

http://forum.gsmhosting.com/vbb/showthread.php?t=655948

[virus_in_brain]

hey sorry for my bad eng...
but images of my mobiles Bossh d111 whats th problem i dnt know but im giving rapidshare links
http://rapidshare.com/files/177036854/bossh_d111.jpg.html

http://rapidshare.com/files/177035907/IMG0025A.jpg. (http://rapidshare.com/files/177035907/IMG0025A.jpg.html)html (http://rapidshare.com/files/177035907/IMG0025A.jpg.html)

http://rapidshare.com/files/177035908/IMG0019A.jpg.html

http://rapidshare.com/files/177035909/data_cable_opened.jpg.html

http://rapidshare.com/files/177035910/data_cable_mobile_end__close.jpg.html

[bigjohnjh]

Please send your problem here, I can help you to solve the question of software and hardware of Chinese phone


I have a CESIM V50,ZOYE Cell phone and my cable connection is broken. I can't find any were to purchase a new cable for it. HELP Please:confused:

[remcalv]

Please send your problem here, I can help you to solve the question of software and hardware of Chinese phone
Hallo I bought an MT6225 GSM PDA cell Phone(LUCK DISNEY) [/B]from China for use in Germany,unfortnatelly i cant get the MMS(multmedia messaging service) configuration because my phone wont be recognised by my network allthough i can use it to make calls and send SMS through the same network.Please help me solve this.Am using O2 germany as network.Thank you.

[baker69]

please send your problem here, i can help you to solve the question of software and hardware of chinese phone

my n82 .when i enter the camera the phone say the module not ready. Help please.