Please send your problem here,of china phone!

[h82bm3]

guad day guys i have this phone from china the model is g618+ and i want to flash it because the OS sucks... somebody from a forum says that the OS of this phone is Linux based. in that case, is there a chance that this phone would probably flashed with Motorola roms since they are also linux based phones or if this is not possible can somebody modified its rom because there are lots of bugs.

also i would like to ask whats wrong with my phone. because if i turn on the slave sim it says "no service" or "emergency" i tried all networks in my country (Philippines) but i have no luck

i hope you could answer my questions....
Please.... guys......

[lacom]

Good News lacom! :)

The code is : 1039 :)

He send me too :)

nice

[yokoweel]

common guys...all the pro or at least got a clues bout what kinda software/application that suitable with TV pda(touch screen) PHONES using MT6227 chips....i hv tried jar,jad,sis,sisx,java so far none working....

cheers

[jaggy]

wantz cect t688i flash file

[donybellini]

Hello people!

For modifications on my phone, a mt6227 based, need i a hardware box? Or only a cable modified cable and the softwares/tools?
Modifications in the system, for example making a backup and altering language, putting java or flash lite to accept games and aplications,and so put back the flash image altered for me on the phone.Exist something that seem like this or the flash tools, hardwares are only for repair and recovery?

Thank you

[zhanglei5556]

anybody give me chines n 95 pin out.thanks
look here! (http://www.phones-china.com/viewthread.php?tid=1805&extra=page%3D2&page=1):)

[zhanglei5556]

How do i unlock the Nokia N96i? Is there a code i can use to unlock the phone?
If it's a mtk chip phones.format it .pls!!:D

[zhanglei5556]

http://anunturi.mobilissimo.ro/imagini-anunturi-telefoane/711_1.jpg
what CPU AND FLASH CHIP MODAL?

[moonstone]

china moblies software is available in infinity box

[tkowsar]

any one have this phone CECTQ2628 pinout it is 12 pin

[sdedo71]

what CPU AND FLASH CHIP MODAL?
MT6226EA, full firmware flash (if possible).
Thanks

[.::NaNTeC::.]

any help ........... i have nokia chinese n95 slider (same of orginal model)was dead http://www.gsmhosting.com/vbb/attachment.php?attachmentid=129090&stc=1&d=1193910184


any one can give flash file that work in free mtktools (bin file)


i wait

& thank for u

[PARANNJMF]

im need china ZT588" mobile video converter

formate- .mp4
per song- 4/5 mb


any one post the converter


thanks in advance.

[KASAM]

please visit my problam
thank you in advance

[KASAM]

http://www.gsmhosting.com/vbb/showthread.php?t=461991

[h82bm3]

gud day guys i have this phone from china the model is g618+ and i want to flash it because the OS sucks... somebody from a forum says that the OS of this phone is Linux based. in that case, is there a chance that this phone would probably flashed with Motorola roms since they are also linux based phones or if this is not possible can somebody modified its rom because there are lots of bugs.

also i would like to ask whats wrong with my phone. because if i turn on the slave sim it says "no service" or "emergency" i tried all networks in my country (Philippines) but i have no luck

i hope you could answer my questions....
Please.... guys......


HELP...............

[wippi24]

Hello i´m Newcomer

I have read the pages from this site and i need language package for this Handy (MT6228) in German!
Can you help me and can you give me an instructions do to install on the MT6228 !
I have download the Flashtool 4.1 !
Please help me members!!


PS: My English is not so good sorry !:D

[Nippo]

any help ........... i have nokia chinese n95 slider (same of orginal model)was dead http://www.gsmhosting.com/vbb/attachment.php?attachmentid=129090&stc=1&d=1193910184


any one can give flash file that work in free mtktools (bin file)


i wait

& thank for u





You must use Infinity-Box for flashing and the calculate ASK/RPL. It's the only way for now to get completely working phone. All types of "patcher", "decrypter", "decoders" etc. that you can find make firmware version patch. Probably phone can power-on after this "patch" but in many cases phone will be very bad (camera not work etc.). I tested by myself and I had this result wit "decryptor" (phone work bad) but after I make ask/rpl with infinity-box phone become completely Ok. So, you have an advice now...

[mahesh_patel361]

please post games for chaina mobile

[coldblooded]

Hi,
I bought CECT Q638 dual sim phone from Shanghai last week. Both sim A and B are running properly in China. But now I am in my home country Turkey.Sim A is okey,but sim B gives the message 'invalid sim' and turn to 'emergency'. I guess sim lock should be unlocked.
Could you please help me?

[uzas]

HI, i've chinese n95, which is OS? Are there an apps for these cell? Thanks

[systemworm]

HI, i've chinese n95, which is OS? Are there an apps for these cell? Thanks
I don't think so that anything is available for it for now even simple games

[coldblooded]

Hi
I bought a CECT Q638 (MT6227) dual sim mobile phone from CHİNA. Both sim cards were running in China,When I am back to my home country,sim A is running but sim B is not. Sim B is giving the message 'invalid sim'.
So I need to solve this problem in order to use both sim cards at the same time.
Please help

[Peterjoseph]

cect n99i dual sim standby but only one network it reads, what can be done

[Nippo]

cect n99i dual sim standby but only one network it reads, what can be done


probably 2nd imei is wrong.
read this in infinity-box support forum http://www.gsmhosting.com/vbb/showthread.php?t=444679

[Peterjoseph]

in my country we have two network 900/1800 & 850/1900 my phone only pick up 900/1800 network, however the phone i brought (cect n99i) works fine on all network. How do i configure this phone to work on the second network as well, Help:confused:

[Peterjoseph]

probably 2nd imei is wrong.
read this in infinity-box support forum http://www.gsmhosting.com/vbb/showthread.php?t=444679

this link doesn't tell a thing, how to get to the 2nd imei

[Peterjoseph]

Please send your problem here, I can help you to solve the question of software and hardware of Chinese phone

cect n99i
cect n99i dual sim standby but only one network it reads, what can be done
Attached Thumbnails http://forum.gsmhosting.com/vbb/attachment.php?attachmentid=129456&stc=1&thumb=1&d=1194123806 (http://forum.gsmhosting.com/vbb/attachment.php?attachmentid=129456&d=1194123806)

http://forum.gsmhosting.com/vbb/images/buttons/report.gif (http://forum.gsmhosting.com/vbb/report.php?p=2842997) http://forum.gsmhosting.com/vbb/images/buttons/quote.gif (http://forum.gsmhosting.com/vbb/newreply.php?do=newreply&p=2842997)

[zhanglei5556]

http://www.gsmhosting.com/vbb/showthread.php?t=461991


you need flash file at here! (http://www.phones-china.com/viewthread.php?tid=103&highlight=n95)

[zhanglei5556]

any help ........... i have nokia chinese n95 slider (same of orginal model)was dead http://www.gsmhosting.com/vbb/attachment.php?attachmentid=129090&stc=1&d=1193910184


any one can give flash file that work in free mtktools (bin file)


i wait

& thank for u







flash file at here! (http://www.phones-china.com/viewthread.php?tid=1793&highlight=n95):D

[zhanglei5556]

Hello i´m Newcomer

I have read the pages from this site and i need language package for this Handy (MT6228) in German!
Can you help me and can you give me an instructions do to install on the MT6228 !
I have download the Flashtool 4.1 !
Please help me members!!


PS: My English is not so good sorry !:D
Sorry, no German language!

[zhanglei5556]

Hi,
I bought CECT Q638 dual sim phone from Shanghai last week. Both sim A and B are running properly in China. But now I am in my home country Turkey.Sim A is okey,but sim B gives the message 'invalid sim' and turn to 'emergency'. I guess sim lock should be unlocked.
Could you please help me?
check sim card ways!now i'm at shanghai!:D

[zhanglei5556]

HI, i've chinese n95, which is OS? Are there an apps for these cell? Thanks
all chinese n95 at here! (http://www.phones-china.com/search.php?searchid=30&orderby=lastpost&ascdesc=desc&searchsubmit=yes):D

[zhanglei5556]

in my country we have two network 900/1800 & 850/1900 my phone only pick up 900/1800 network, however the phone i brought (cect n99i) works fine on all network. How do i configure this phone to work on the second network as well, Help:confused:
the phone support network 900/1800 only.:D

[andr3_jc]

hi br
can u help me for this phone?
in front write N80 and back side write DB6588
is this a chinese phone too?
use 12 pin from usb left side phone.
i have infinity box .can i repair it with infi?
tis is the pic:






im new in chinese miraclephone
thx 4u help
br

[Peterjoseph]

how do find the specs for this phone (cect n99i), its not picking up one network but both sim slots work

[zhanglei5556]

hi br
can u help me for this phone?
in front write N80 and back side write DB6588
is this a chinese phone too?
use 12 pin from usb left side phone.
i have infinity box .can i repair it with infi?
tis is the pic:






im new in chinese miraclephone
thx 4u help
br


flash file at here!2 LCD version. (http://www.phones-china.com/viewthread.php?tid=1952&page=1&extra=page%3D1#pid3574):)

[Peterjoseph]

the phone support network 900/1800 only.:D

i brought as a tri-band (900/1800/1900) the before this one works very well

[andr3_jc]

thx for rep br zhang
but can i repair with infinity box? or another one box?
please tellme what box/s ware can do to repair this phone
thx

[ddish]

I have A380 MT6227 chip and am wondering if it is possible to change frequency so I can use them in U.S.
Thanks

[Nippo]

thx for rep br zhang
but can i repair with infinity box? or another one box?
please tellme what box/s ware can do to repair this phone
thx



Infinity-box is the best solution today for Chinese models, it's the real fact and I am sure that everybody agree with me. I have repaired many Chinese models with Infinity. Also small info: better use Infinity ask/rpl calculation and never use any free chinese "decryptors" and "patchers" because this software can make phone alive but phone become buggy (due to not good patch method), f.e. camera work not good etc. It's fact too.

[yokoweel]

common guys...all the pro or at least got a clues bout what kinda software/application that suitable with TV pda(touch screen) PHONES using MT6227 chips....i hv tried jar,jad,sis,sisx,java so far none working....

cheers


Hi Zhang...can u help me.....i just need to know what app n software....???

[mcclinic]

hi zhang. thanks for nice posting here. i format few china set(cect,suny ericssum) but steel these problem.this problem is when power on the mobile few words(chinese or english) stay in the display.what can i do?

[coldblooded]

what do you mean by saying 'check sim card ways?
I have a friand in Shanghai.If you can help me, I can send my mobile to Shanghai to my friend and he will take take.But just tell me how can you help me,can you solve that problem

[coldblooded]

check sim card ways!now i'm at shanghai!:D
what do you mean by saying 'check sim card ways?
I have a friand in Shanghai.If you can help me, I can send my mobile to Shanghai to my friend and he will take take.But just tell me how can you help me,can you solve that problem

[armamun]

Dear Sir,

I Baught a mtk box, but i have no idea haw can i format & falsh chainess mobile as like "nokia 6300" use by mtk box, i have no updated setup file, pls help me regarding this issue details.

thanks

armamun

mail: ataurr2002@yahoo.com

[enzawigroup]

hi infinity team i have this prob
COM8 [VCP4] selected
Phone should be Switched OFF !
Press and HOLD Power button now !
19200
error: boot phase#2/1 failed
Can't initialize test mode !
Possible reasons:
1. communication fault, repeat required operation
2. eeprom serious damaged, use repair eeprom files or use other unlock/format method
Operation failed !
Finished, time used: 6 sec
Remove/Install battery now !

[zhanglei5556]

thx for rep br zhang
but can i repair with infinity box? or another one box?
please tellme what box/s ware can do to repair this phone
thx
This is box can flash it. (http://www.phones-china.com/viewthread.php?tid=99&extra=page%3D1):D

[zhanglei5556]

Hi Zhang...can u help me.....i just need to know what app n software....???
jar format,only support some china phone!:D

[zhanglei5556]

what do you mean by saying 'check sim card ways?
I have a friand in Shanghai.If you can help me, I can send my mobile to Shanghai to my friend and he will take take.But just tell me how can you help me,can you solve that problem
That's Ok.i'm at
Tian mu xi Road, 99, di ping xian mobile market, 5 F B37.:) waiting fro you!:D

[zhanglei5556]

Dear Sir,

I Baught a mtk box, but i have no idea haw can i format & falsh chainess mobile as like "nokia 6300" use by mtk box, i have no updated setup file, pls help me regarding this issue details.

thanks

armamun

mail: ataurr2002@yahoo.com
post pic and CHIP model at here!or find it at here (http://www.phones-china.com/index.php):D

[zubairahmed77]

help me

http://forum.gsmhosting.com/vbb/showthread.php?t=460476

[Nippo]

hi infinity team i have this prob
COM8 [VCP4] selected
Phone should be Switched OFF !
Press and HOLD Power button now !
19200
error: boot phase#2/1 failed
Can't initialize test mode !
Possible reasons:
1. communication fault, repeat required operation
2. eeprom serious damaged, use repair eeprom files or use other unlock/format method
Operation failed !
Finished, time used: 6 sec
Remove/Install battery now !

You have used wrong pinout. Just use correct Rx, Tx, Ground wires and your pone will be repaired in seconds with Infinity-box. Also you may need to try to make other "ffs format" method, make "complete" format instead of "safe".
I have repaired many phones with Infinity-box and everything it works fine.

[Martinix]

which kinda cable is used to flash china phones. i try using cable supplied with fon but fon not detected

[Anam Ayyub]

i have XINGTAI S560
now m having various problems
it get slower
the other one is whenever i connect it with my computer through data cable the memory card is shown but the folders inside it could not b opened

and whenever any file is rcvd through bluetooth n saved in memory card it wont b displayed
plz figure out that what problem my mobile is having
n what if i wana reset my settings and software
from where i can get

thanking u in anticipation

[firrozkhan_00]

cect v180 pinout with picture

[firrozkhan_00]

cect v180 pinout with picture

[Andrew_sh]

cect v180 pinout with picture

may be at http://pinouts.ru/cgi-bin/view_filt.cgi?text=chinese ??

[pilipi]

s it posible to change imei of china phones???????

[PARANNJMF]

im need china ZT588" mobile video converter

formate- .mp4
per song- 4/5 mb


any one post the converter


thanks in advance.



pls help me.
here "TrueMpeg4" video song (today i collect it one customer ZT588 mobile)
http://rapidshare.com/files/68255982/TrueMpeg4.rar.html

[maka_gsm]

i have this touch screen Sands P908 its auto-off any solution Guys?

[simplyvicks]

I Need CECT U90 Video Convertor... i dont think who will help me ... i am totally hopeless

[esmaeelali]

i have a cect t689 and for flashing it what things i must know.
for file flashes where i can find and what program we can install on it.:cool:

[yokoweel]

jar format,only support some china phone!:D


oh man....! at last ! ...thanks Bro Zhang !!


;)

[pedrobrazil]

Hi,
Im really a noob in china phones, i bought mine two day ago.
The first problem is to know the model
In the box it written "CECT" and have the "168" in the upside right.
photos:
http://img476.imageshack.us/img476/9573/frontcectfi3.th.jpg (http://img476.imageshack.us/my.php?image=frontcectfi3.jpg)
and
http://img468.imageshack.us/img468/5162/backcectxz2.th.jpg (http://img468.imageshack.us/my.php?image=backcectxz2.jpg)
So, after that, id like to ask you guys for the driver :MT6227. This driver is missing for me to instal the webcam and COM function from the cell phone.

Thanks in advance and keep up the good work,
Pedro Aragão
Rio de Janeiro,Brazil

[pedrobrazil]

Hello,
I have anothe doubt, whitch program/configuration do i use to capture the webcam in cect"s phone?

[johns_com2003]

pls I need flashfile for nokia china phones like 3230 3250 N70 N90 6280 etc and a compactible software

[intervix]

pls could you tell me how to set the Cect U8800 in English...
http://www.1314sj.com/images/upfile/...0405495193.jpg (http://www.1314sj.com/images/upfile/2007061900405495193.jpg)

[Infinity-Box]

[QUOTE=enzawigroup;2848995]hi infinity team i have this prob
COM8 [VCP4] selected
Phone should be Switched OFF !
Press and HOLD Power button now !
19200
error: boot phase#2/1 failed
Can't initialize test mode !
Possible reasons:
1. communication fault, repeat required operation
2. eeprom serious damaged, use repair eeprom files or use other unlock/format method
Operation failed !

its 100% cable proble, use correct pinout check for pinout.rar in support area of infinity box

[aboud]

i have a nokia 9900 Diamond MTK cpueverytime i switch it on appears chrging by itself withoout the charger attached and than tells me usb removed.
any idea?

[hcomp]

plz
CECT 808 Restart when put the SIM card in it
can you hellp or are you have code to format it

thank

[siam123]

Hi All,

I need the pc syncronization software and usb modem driver for the Maximus v90 mobile phone on vista platform.

Thanks.
Siam

[frank100]

Please send your problem here, I can help you to solve the question of software and hardware of Chinese phone



I need to connect to the internet using this phone.sands a203 but i dont have the software,pliz help.

[zhanglei5556]

help me

http://forum.gsmhosting.com/vbb/showthread.php?t=460476
china phone. if it not support JAR,i think other it not support!:D

[zhanglei5556]

i have XINGTAI S560
now m having various problems
it get slower
the other one is whenever i connect it with my computer through data cable the memory card is shown but the folders inside it could not b opened

and whenever any file is rcvd through bluetooth n saved in memory card it wont b displayed
plz figure out that what problem my mobile is having
n what if i wana reset my settings and software
from where i can get

thanking u in anticipation
try format your memory card!:)

[zhanglei5556]

i have a cect t689 and for flashing it what things i must know.
for file flashes where i can find and what program we can install on it.:cool:
post u phone info.CPU and FLASH model .:D

[Nippo]

plz
CECT 808 Restart when put the SIM card in it
can you hellp or are you have code to format it

thank

You cant repair this kind of damage with codes, you must use special software and special procedure:
http://forum.gsmhosting.com/vbb/showthread.php?t=447277

[zhanglei5556]

pls I need flashfile for nokia china phones like 3230 3250 N70 N90 6280 etc and a compactible software
find here (www.phones-china.com):p

[zhanglei5556]

pls could you tell me how to set the Cect U8800 in English...
http://www.1314sj.com/images/upfile/...0405495193.jpg (http://www.1314sj.com/images/upfile/2007061900405495193.jpg)
look here! (http://www.phones-china.com/viewthread.php?tid=1825&highlight=code)try use these code!good luck to u!:D

[zhanglei5556]

i have a nokia 9900 Diamond MTK cpueverytime i switch it on appears chrging by itself withoout the charger attached and than tells me usb removed.
any idea?
Check CPU,Additional welding and replacement.:p

[zhanglei5556]

plz
CECT 808 Restart when put the SIM card in it
can you hellp or are you have code to format it

thank
If phones of MTK chip.try use tools format it.

[Nippo]

pls could you tell me how to set the Cect U8800 in English...
http://www.1314sj.com/images/upfile/...0405495193.jpg (http://www.1314sj.com/images/upfile/2007061900405495193.jpg)

Very good site with free codes and software is here:
http://www.atm-box.com/index.php?id=utilities

[Nippo]

pls I need flashfile for nokia china phones like 3230 3250 N70 N90 6280 etc and a compactible software


Many flash files you can see here:
http://www.infinity-box.com/download/idx/index.php?user=demo&pass=demo&key=demo&cdate=demo

[LUCK268]

Dear all. I have a Chineese O3 (838) N66 Mobile with PHONE LOCK CODE. Can some one help me with MASTER CODE like thing so that i can reset the code. Waiting for quick reply.
Thanks in advance.

[jln310]

have cetc dual sim cellphone sometimes line 2 have signal sometimes no signal is that the phone problem or network problem

[alamgarh]

many time when i flash a dead or on set after flashing i have done ask/rpl but it show white lcd any solution.

[Peterjoseph]

how can i find what band(s) this phone operate on?:confused:

[steven88]

If it's a mtk chip phones.format it .pls!!:D


How do i check if its an mtk chip phone? Should formating it do the trick if thats the case?

[steven88]

Ok its an Mtk chip phone but how do i format it?

[Kryss05]

If phones of MTK chip.try use tools format it.

Hi all guys and plss. I have a phone G618+ http://goldfly.en.alibaba.com/product/50420643/200209625/Mobile_phone/China_mobile_phone_Model_G618_.html
and microphone is very low sound!!!
Plss hellp me !!... How to check my sw version??

[steven88]

Well my initial problem was how to unlock the Nokia N96i and be able to use it in Canada. Formating did nothing, is there a code i can possibly use?I know its not a real Nokia but it works perfectly and i would like to be able to use it in Canada.

[csramesh]

Hi, my model is 3GSM TV Y390 - chinese mobile. i have a very big problem. that i can't view the call history. there is a option of call history, but if i go inside and see it, it says no entrys. even i can't able to get dialled - missed - recieved call history.

if any oprions is there can you send it my mail id. which specified below this msg.

pls help me in this regards

thanks in advance
c.s.ramesh
csrameshkumar@gmail.com

[Peterjoseph]

need flash file for this phone, thx

[daalibi]

:o I have dual gsm CECT 689 MT6227. The command *#8375# give me this informations:
Version: E550_A5FRENCHBT.01.1_26S01
BRANCH: 05C
BUILD: BUILD_N0
BUILD TIME : 2007/06/14 19:27
My problem is sim B. he make error! when i want to pick a phone. sms sim B, phonebook B make error! to. but sim B is connect to the operator and ring.
How can i resolve this problem?
Help me please

[borndevils81]

[helo Sir Am Having Chinese N95 Sliding One.its Getting Restating.so I Need To Format.am Havinh N95 Datacable.how To Alter Ths Cable To FormaT Ths Handset.rx,tx,gnd Plz Gve The Pin Out Also.http://www.lonllida.com/photos/s200785201625.jpg

[ifamrm]

need pinout for Cect T689

[KASAM]

need pinout for Cect T689

use this:)..................

[KASAM]

[helo Sir Am Having Chinese N95 Sliding One.its Getting Restating.so I Need To Format.am Havinh N95 Datacable.how To Alter Ths Cable To FormaT Ths Handset.rx,tx,gnd Plz Gve The Pin Out Also.http://www.lonllida.com/photos/s200785201625.jpg


use this.............................

[borndevils81]

i opend the cable thn i find 4 cables inside green,black,white,red.which is rx,tx,grounds

[KASAM]

i opend the cable thn i find 4 cables inside green,black,white,red.which is rx,tx,grounds


you take motorola t191 serial cable
use this pinout to repair n95.........

[/ARIF/]

china 6300 formate ok but power not on .............................

[/ARIF/]

and i need china 6300 rx tx and gnd..............................

[KASAM]

and i need china 6300 rx tx and gnd..............................


use this...............pinout:)

[borndevils81]

ya i did it but it asking tht cable usb driver




you take motorola t191 serial cable
use this pinout to repair n95.........

[32574]

Regard, I from Russia, bad talk in english, I need firmare cect p168 (copy IPHONE) Please help!!!
http://195.97.24.60/p168/cectp168.jpg

[/ARIF/]

china n95 auto charging .i need to real solution..................

[32574]

Regard, I from Russia, bad talk in english, I need firmare cect p168 (copy IPHONE) Please help!!!
http://195.97.24.60/p168/cectp168.jpg

http://www.phoneservice.spb.ru/forum/attachment.php?attachmentid=4147&thumb=1&d=1195118328

[ufs3]

hey all ... please I need help I have n95 chinese with one sim card ... SIM CARD REGESTRATION FAILED . plz help (INVALID SIM)

[mcclinic]

If phones of MTK chip.try use tools format it.
Brother zhanglei china nokia n73(daxian x728) mobile i can't format with super doctor cable .what can i do ?please help me.

[daalibi]

I have dual gsm CECT 689 MT6227. The command *#8375# give me this informations:
Version: E550_A5FRENCHBT.01.1_26S01
BRANCH: 05C
BUILD: BUILD_N0
BUILD TIME : 2007/06/14 19:27
My problem is sim B. he make error! when i want to pick a phone. sms sim B, phonebook B make error! to. but sim B is connect to the operator and ring.
How can i resolve this problem?
Help me please

[tienemi]

Please "HELP ME" I have a chinese 6300 ...

it reboot with sim ..

and i cant format it with Infinity..

it have been error....

i used T191 cable.....

How can I Format it Please Help Me... I will wait you....

[ufs3]

hey all ... please I need help I have n95 chinese with one sim card ... SIM CARD REGESTRATION FAILED . plz help (INVALID SIM)

[zhanglei5556]

Dear all. I have a Chineese O3 (838) N66 Mobile with PHONE LOCK CODE. Can some one help me with MASTER CODE like thing so that i can reset the code. Waiting for quick reply.
Thanks in advance.
format it or backup flash file for search code!:)

[zhanglei5556]

have cetc dual sim cellphone sometimes line 2 have signal sometimes no signal is that the phone problem or network problem
If it have dual cpu and RF.check RF for MT6205.pls:cool:

[zhanglei5556]

many time when i flash a dead or on set after flashing i have done ask/rpl but it show white lcd any solution.
Trying flash other version for it!:)

[zhanglei5556]

How do i check if its an mtk chip phone? Should formating it do the trick if thats the case?
The use of CPF-BOX, it can automatically search chip model!:D

[zhanglei5556]

Well my initial problem was how to unlock the Nokia N96i and be able to use it in Canada. Formating did nothing, is there a code i can possibly use?I know its not a real Nokia but it works perfectly and i would like to be able to use it in Canada.
trying backup flash file.and formating address 0×0000000-0×01000000 for your phone.:p

[zhanglei5556]

Hi, my model is 3GSM TV Y390 - chinese mobile. i have a very big problem. that i can't view the call history. there is a option of call history, but if i go inside and see it, it says no entrys. even i can't able to get dialled - missed - recieved call history.

if any oprions is there can you send it my mail id. which specified below this msg.

pls help me in this regards

thanks in advance
c.s.ramesh
csrameshkumar@gmail.com
Trying flash it!
Hope can help you!
:D

[zhanglei5556]

need flash file for this phone, thx
search in the here (www.phones-china.com).pls:D

[zhanglei5556]

:o I have dual gsm CECT 689 MT6227. The command *#8375# give me this informations:
Version: E550_A5FRENCHBT.01.1_26S01
BRANCH: 05C
BUILD: BUILD_N0
BUILD TIME : 2007/06/14 19:27
My problem is sim B. he make error! when i want to pick a phone. sms sim B, phonebook B make error! to. but sim B is connect to the operator and ring.
How can i resolve this problem?
Help me please
flash it,hope can help you!:)

[zhanglei5556]

[helo Sir Am Having Chinese N95 Sliding One.its Getting Restating.so I Need To Format.am Havinh N95 Datacable.how To Alter Ths Cable To FormaT Ths Handset.rx,tx,gnd Plz Gve The Pin Out Also.http://www.lonllida.com/photos/s200785201625.jpg
Flash file at here (http://www.phones-china.com/viewthread.php?tid=1033&highlight=n95).u can flash it.:D

[zhanglei5556]

and i need china 6300 rx tx and gnd..............................
search in the www.phones-china.com (http://www.phones-china.com):D

[zhanglei5556]

china n95 auto charging .i need to real solution..................
repair the cpu,and change the cpu.can help you!:D

[zhanglei5556]

Please "HELP ME" I have a chinese 6300 ...

it reboot with sim ..

and i cant format it with Infinity..

it have been error....

i used T191 cable.....

How can I Format it Please Help Me... I will wait you....
Use CPF-BOX ,hope it can help you.:D

[zhanglei5556]

Brother zhanglei china nokia n73(daxian x728) mobile i can't format with super doctor cable .what can i do ?please help me.
use CPF-BOX too.try format again!:D

[zhanglei5556]

hey all ... please I need help I have n95 chinese with one sim card ... SIM CARD REGESTRATION FAILED . plz help (INVALID SIM)
what chip for your phone?post more detail at here.and phones pcb pic!:cool:

[NguyenLinh]

HI all. I have a phone Cect668 MT6226 SPANSION S71PL127N ram 32M there is 2 sim and the bluetooth who is have FullFlash Please kindly what a the credit to help my give all right. Every people the thank!

[tienemi]

Use CPF-BOX ,hope it can help you.:D
Thanks for all but i dont have CPF-BOX how can i do that?

[ufs3]

hey all ... please I need help I have n95 chinese with one sim card ... SIM CARD REGESTRATION FAILED . plz help (INVALID SIM)

[serseg.gsm]

Originally Posted by ufS3
hey all ... please I need help I have n95 chinese with one sim card ... SIM CARD REGESTRATION FAILED . plz help (INVALID SIM)

I have same problem with chiness N73. any help please. Zhanglei5556 why not answer this.

[elgato]

i need pinout cable for this phone N92:)

[zenithgsm]

My Suntek Everfo 863 Not Boot In Infinity Box Please Help Me

[Nippo]

Thanks for all but i dont have CPF-BOX how can i do that?


You can do it with Infinity-Box: www.infinity-box.biz

[Nippo]

My Suntek Everfo 863 Not Boot In Infinity Box Please Help Me


You must ask your question regarding Infinity-Box in Infinity-Box support forum but not in this forum. Here is link to Infinity-Box support forum:
http://www.gsmhosting.com/vbb/forumdisplay.php?f=425

[Nippo]

I have same problem with chiness N73. any help please. Zhanglei5556 why not answer this.


You have used sim card that was rejected by network (zero balance) or probably your phone is sp-locked (you can unlock it with Infinity-Box).

[rafiqnth]

My CGC SET Not Boot In Infinity Box Please Help Me



cgc
model:-c313
s/n: u313t203d070921
imei:354411000226101

[ufs3]

please I need help I have n95 chinese with one sim card ... SIM CARD REGESTRATION FAILED . plz help (INVALID SIM)

[zhanglei5556]

I have same problem with chiness N73. any help please. Zhanglei5556 why not answer this.
Not that your question, please release detailed information problems!

[zhanglei5556]

please I need help I have n95 chinese with one sim card ... SIM CARD REGESTRATION FAILED . plz help (INVALID SIM)
REGESTRATION ??what's meaning?:confused:

[Nippo]

My CGC SET Not Boot In Infinity Box Please Help Me



cgc
model:-c313
s/n: u313t203d070921
imei:354411000226101

You must ask your question regarding Infinity-Box in Infinity-Box support forum but not in this forum. Here is link to Infinity-Box support forum:
http://www.gsmhosting.com/vbb/forumdisplay.php?f=425

[Nippo]

please I need help I have n95 chinese with one sim card ... SIM CARD REGESTRATION FAILED . plz help (INVALID SIM)


You have used wrong sim-card (card not accepted by netwok), f.e. zero card balance, also it it possible damaged RF phone hardware part.
can you make emergency call with this phone ?

[ufs3]

(INVALID SIM) n95 chinese 1-sim please help . need to unlock

[gsmxpert]

hoping to find a free site to get all chinese flash files

[agron]

need flashin cect689 and oother model cect china please help

[宁国徽]

need flashin cect689 and oother model cect china please help

please the :http://www.phones-china.com

[ufs3]

please I need help I have n95 chinese with one sim card ... SIM CARD REGESTRATION FAILED . plz help (INVALID SIM)

[mcclinic]

China nokia 6300 format ok but not power on.I used super doctor box cable and 4.1 flash tool. How can i solve this problem.pls any body help me.

[johnny_liang]

use mtk, yesterday i successful format 6300 and phone become alive

[Nippo]

(INVALID SIM) n95 chinese 1-sim please help . need to unlock


man... why you ask questions if you did not read answers ?
http://www.gsmhosting.com/vbb/showpost.php?p=2881803&postcount=650

[Nippo]

please I need help I have n95 chinese with one sim card ... SIM CARD REGESTRATION FAILED . plz help (INVALID SIM)

do you know the meaning of word "read" ?

http://www.gsmhosting.com/vbb/showpost.php?p=2885412&postcount=658

[Nippo]

use mtk, yesterday i successful format 6300 and phone become alive


Exist many different phone with name "6300", just check picture and you will see. So method that good for one "6300" probably not good for other "6300"

[vodafone0218]

I have a vodafone125 with imei: 355861016556546, It made from china, Can you give me the unlock code? I really grateful, best regards and thx so much!http://www.gsmhosting.com/ubb/smile.gif I have been waiting for unlock code for a long time, but .............http://www.gsmhosting.com/ubb/frown.gif

[tienemi]

Hi All .... I have a SED AK606 Chinese Phone and it reboot with sim... and i cant format it.. photo of the phone.

Anybody can help me for that... How can I format that?




http://img20.imageshack.us/img20/1120/errorma1.th.jpg (http://img20.imageshack.us/my.php?image=errorma1.jpg)

[zhanglei5556]

HI all. I have a phone Cect668 MT6226 SPANSION S71PL127N ram 32M there is 2 sim and the bluetooth who is have FullFlash Please kindly what a the credit to help my give all right. Every people the thank!
71pl127 size is 16MB.not 32M.have it 2 flash ?:confused:

[zhanglei5556]

I have same problem with chiness N73. any help please. Zhanglei5556 why not answer this.
Tell me ,what's meaning REGESTRATION??i cann't understand!sorry SIR!:confused:

[zhanglei5556]

(INVALID SIM) n95 chinese 1-sim please help . need to unlock
China phones not have network lock!don't need unlock.what chip with N95?

[zhanglei5556]

Hi All .... I have a SED AK606 Chinese Phone and it reboot with sim... and i cant format it.. photo of the phone.

Anybody can help me for that... How can I format that?




http://img20.imageshack.us/img20/1120/errorma1.th.jpg (http://img20.imageshack.us/my.php?image=errorma1.jpg)

Try writing flash file for your AK606.flash file download at version 1 (http://www.phones-china.com/viewthread.php?tid=695&highlight=ak606)and version 2 (http://www.phones-china.com/viewthread.php?tid=112&highlight=ak606).Good luck to you!
:D:D

[agron]

need software for CECT 689 NEED FLASHING THIS MODEL

[ss.com]

i have problem cect v668 when i in the shim after emargency solv plz.......

[bjadani]

hi,

i need the software upgrade for baby g g100

[ufs3]

man... why you ask questions if you did not read answers ?
http://www.gsmhosting.com/vbb/showpost.php?p=2881803&postcount=650


sorry bro yeah I can do emer calls

[ufs3]

I need n66 pinout too thx.

[doorcarlos]

Hello, I am Brazilian and I not have BOX
I wonder if there is any program for my phone that can change themes and language
Only using a Serial or USB cable and my PC?

The CHIP:
MT6601T
0720-ANEL
BAJ6TN
AD34HP

Mo Chip silver above :
T320
BeSO

This phone is called too:
- tecknet a706
- Mob--31

PICTIRES

http://www.plusgsm.com.br/forums/attachment.php?attachmentid=19971&d=1193252496

http://www.plusgsm.com.br/forums/attachment.php?attachmentid=19970&d=1193252496

http://www.plusgsm.com.br/forums/attachment.php?attachmentid=19969&d=1193252496

http://www.phones-china.com/attachment.php?aid=6365&noupdate=yes

[mcclinic]

China nokia 6300 flash files

NOKIA Q7+(MT6226Ba,71PL127NBOHFW4B)COPY 6300

HERE (http://www.phones-china.com/viewthread.php?tid=1763&highlight=q7)
Brother this link need credit .Give any free link .Thanks 4 reply.

[mcclinic]

I need cect n770 pin out any body help me?

[Svetli]

i have for repair one Amoi A203 and need service manual ?

[bebsi12000]

please i need format code for anycool d66

[ullo]

Hi zhanglei5556,

thank you for your Help, its nice that Somebody help us with our Chines Mobiles.
I Hope you know the Iphone Clone Cect P168, we have an big problem (German Forum) we cant Flash this mobile because we dont know, what we need?! Can you help us. Somebody Said to me that we need an Ifinitiy box is this right?

Our big Problem is that the Software on the CECT P168 is very bad, the german has to much errors. And we need JAVA because (The Games on the Phone are Horrible :D). I Hope you can Help us please contact me.
I Say Thanks in the name of the German Cect Community.
The other problem is that the infinity box is not very cheap (About 250$) and if we dont know if this work, its to much for only play ^^


ullo

[raggy]

i need your help in hardware.
i have a CECT T828 cdma error, could you provide me the schematic diagram? or just give me the hint where is the point?

[agron]

I have problem with CECT 689 model i need flash this i dont have a box do you have a free version for this

pls
and how security code have this cect689 phones pls request me

[zhanglei5556]

(INVALID SIM) n95 chinese 1-sim please help . need to unlock
what u phones chips?CPU and FLASH model?

[zhanglei5556]

China nokia 6300 format ok but not power on.I used super doctor box cable and 4.1 flash tool. How can i solve this problem.pls any body help me.
only one ways!try flash it!:p

[zhanglei5556]

Hi zhanglei5556,

thank you for your Help, its nice that Somebody help us with our Chines Mobiles.
I Hope you know the Iphone Clone Cect P168, we have an big problem (German Forum) we cant Flash this mobile because we dont know, what we need?! Can you help us. Somebody Said to me that we need an Ifinitiy box is this right?

Our big Problem is that the Software on the CECT P168 is very bad, the german has to much errors. And we need JAVA because (The Games on the Phone are Horrible :D). I Hope you can Help us please contact me.
I Say Thanks in the name of the German Cect Community.
The other problem is that the infinity box is not very cheap (About 250$) and if we dont know if this work, its to much for only play ^^


ullo
Sorry SIR.I not have the phones.if i have it.i think i can help u.but don't worry.u can use CPF-BOX backup a good P168 phones flash file.writing the flash file to the bad phones after!i think it can help you solve your problem!Good lock!:D

[zhanglei5556]

I have problem with CECT 689 model i need flash this i dont have a box do you have a free version for this

pls
and how security code have this cect689 phones pls request me
Free tools find at here (www.phones-china.com):D

[zhanglei5556]

please i need format code for anycool d66
Not code for d66 format.u can use CPF-BOX format it!

[zhanglei5556]

I need cect n770 pin out any body help me?
U can use CPF-BOX (http://www.phones-china.com/viewthread.php?tid=99&page=1&extra=page%3D1).the box can auto search cable pinouts.:D

[heartrob_jade]

can you help how to fix about the problem of my fon which is about the camera "operation failed"... i guess due to a lot of times it falls.. pls help me.. do i need to reset my fon? any suggestion...pls reply asap..thnx

[tarunvishal]

hello brother thanks for ur information i have a set Bluetooth 6688 problem is set restrat without sim so i m try to format with infnity but i m xcant format the set with infinty why i dont know when i m press the format buuton and software says press power button so set on not goes in test mode but i m format the set with MTK TOOL is finish the format but problem is same
someone tell me is the harware problem or rf ic problem so i m want to know where is rf ic plz locate it with picture

or this is not a hardware problem so plz give me the write solution i m in trouble

when i m read flash backup they not show any file name its show only backup_flash_20071125-135258.B0M

to cpu in the set one is MT6205BA or other is 6226BA

[trinhngoctrung]

I have problem with CECT 689 model i need flash this i dont have a box do you have a free version for this

pls
and how security code have this cect689 phones pls request me


All solution for making USB Cable is here for long time, my friend:

http://gsmhosting.com/vbb/showthread.php?t=426253&page=8

If you need MTK tool, I'll upload! File for flashing (Read from other one) need tobe repair, so please read your anh upload it here, I'll repair it for you!

Best Regard!

[wippi24]

Hello Friends

Sorry when i post this message again (The searchfunktion give no result:confused:)
because i need an German Language for this phone

Please help me GURU´s for this Phone´s

[zhanglei5556]

hello brother thanks for ur information i have a set Bluetooth 6688 problem is set restrat without sim so i m try to format with infnity but i m xcant format the set with infinty why i dont know when i m press the format buuton and software says press power button so set on not goes in test mode but i m format the set with MTK TOOL is finish the format but problem is same
someone tell me is the harware problem or rf ic problem so i m want to know where is rf ic plz locate it with picture

or this is not a hardware problem so plz give me the write solution i m in trouble

when i m read flash backup they not show any file name its show only backup_flash_20071125-135258.B0M

to cpu in the set one is MT6205BA or other is 6226BA
Your phones is dual cpu?If it have dual cup,I think it is have dual sim card,too.I want know sim card A of card B problem?

[telxtraltd]

I have power problem with Chinese Samsung D900. The firmware is E500 HS.... pls, help

[sa3daawi]

ihave n82 and anycool problem these days since the only solution ihave for them is formating useing one flashtool via mtk box
ineed solutuion around mtk no talk about infininty box please ...
iam kind stuck here the green light in formating light ok but the phone still shuting down and even is some cases going off for good any tools you recomend will be fine any advice will apreciated and iam in your hands guys ....i useing the read back and even try it formating adresess from 16 down to 4 nothing happen and iam not satisfied ..PS

[sa3daawi]

ihave n82 and anycool problem these days since the only solution ihave for them is formating useing one flashtool via mtk box
ineed solutuion around mtk no talk about infininty box please ...
iam kind stuck here the green light in formating light ok but the phone still shuting down and even is some cases going off for good any tools you recomend will be fine any advice will apreciated and iam in your hands guys ....i useing the read back and even try it formating adresess from 16 down to 4 nothing happen and iam not satisfied ..PS IAM NEW IN THE FEILD OF CELL PHONE ...thanks

[sa3daawi]

ihave n82 and anycool problem these days since the only solution ihave for them is formating useing one flashtool via mtk box
ineed solutuion around mtk no talk about infininty box please ...
iam kind stuck here the green light in formating light ok but the phone still shuting down and even is some cases going off for good any tools you recomend will be fine any advice will apreciated and iam in your hands guys ....i useing the read back and even try it formating adresess from 16 down to 4 nothing happen and iam not satisfied ..PS IAM NEW IN THE FEILD OF CELL PHONE ...thanks ihope

[sa3daawi]

ihave n82 and anycool problem these days since the only solution ihave for them is formating useing one flashtool via mtk box
ineed solutuion around mtk no talk about infininty box please ...
iam kind stuck here the green light in formating light ok but the phone still shuting down and even is some cases going off for good any tools you recomend will be fine any advice will apreciated and iam in your hands guys ....i useing the read back and even try it formating adresess from 16 down to 4 nothing happen and iam not satisfied ..PS IAM NEW IN THE FEILD OF CELL PHONE ...thanks ihope you

[sa3daawi]

ihave n82 and anycool problem these days since the only solution ihave for them is formating useing one flashtool via mtk box
ineed solutuion around mtk no talk about infininty box please ...
iam kind stuck here the green light in formating light ok but the phone still shuting down and even is some cases going off for good any tools you recomend will be fine any advice will apreciated and iam in your hands guys ....i useing the read back and even try it formating adresess from 16 down to 4 nothing happen and iam not satisfied ..PS IAM NEW IN THE FEILD OF CELL PHONE ...thanks ihope you lead me to the right way

[mcclinic]

China phones not have network lock!don't need unlock.what chip with N95?
Brother zhanglei i need nokla(ztc zt588) 12 pin and cect n770 pin out

[Nippo]

can you help how to fix about the problem of my fon which is about the camera "operation failed"... i guess due to a lot of times it falls.. pls help me.. do i need to reset my fon? any suggestion...pls reply asap..thnx

First step: make "format"
if after format you have the same problem you must see is camera hardware Ok. Also maybe you have to use other firmware that will be good for your phone camera hardware.

[Nippo]

Hello Friends

Sorry when i post this message again (The searchfunktion give no result:confused:)
because i need an German Language for this phone

Please help me GURU´s for this Phone´s

You have to flash phone with new firmware that has inside language that you need. You can find new firmware in this forum (use search, it will helps) or you can create it by yourself (but its not free and not so easy solution).
Exist several different solutions for language editing but i prefer this http://www.infinity-box.biz/index.php?id=langedit&lg=en

[bimbogo]

hello! i am new on this forum
i have a cect T689 with bluetooth, when i put sim card in phone , restart after a short time, witout the sim card work fine, please help me.

[rajtelecom]

i need flash file for Super Doctor Box

[one2345shutup]

Hello, my dad just bought an easycall p810 from hong kong. He's trying to figure out how to use it in the us and to to change the language to english. Hope you can help, thank you!

[raggy]

brother zhang, i need your help in hardware.
i have a CECT T828 cdma error, could you provide me the schematic diagram? or just give me the hint where is the point? :confused:

[raggy]

brother zhang, i need your help in hardware.
i have a CECT 828 cdma error, could you provide me the schematic diagram? or just give me the hint where is the point? :confused:

[cipi_gsm]

i have one AMOI MD1.Is any solution for unlock?
thx in advance!

[adryandesign]

Hy i have a Nckia g66 and i had broken the touchscreen.Please tell me where i
can find a touchscreen to replaced it.

[Shamilmim]

Dear, How can I get user manual for C92 in english. Please help me,

Thanks
Shamil

[IG4L]

I am in USa and I purchased an CECT A380 from a China source. I have been trying to figure out how to activate this phone. I put SIM Card in and it says no service. I am a rookie at gadgets so I don't have a clue where to start to get service. I asked source i purchased from and seems to be as clueless as me. He keep telling me to contact my carrier and my carrier says they know nothing about the phone, so they are no help either. Do I need to change frequency on phone or do some type of firmware upgrade to unlock? I need your expertise help. Thanks

[Nippo]

I am in USa and I purchased an CECT A380 from a China source. I have been trying to figure out how to activate this phone. I put SIM Card in and it says no service. I am a rookie at gadgets so I don't have a clue where to start to get service. I asked source i purchased from and seems to be as clueless as me. He keep telling me to contact my carrier and my carrier says they know nothing about the phone, so they are no help either. Do I need to change frequency on phone or do some type of firmware upgrade to unlock? I need your expertise help. Thanks


At first try to make emergency call w/o sim-card, if you can't make emergency call this means that phone hardware damaged.

[Nippo]

i need flash file for Super Doctor Box
Try to contact to this box support team and ask them to give you access to support area with files.

[sprinkler66]

Hello, I just got a CECT Q638 dual SIM from CN. Many functions are easy to understand, but I need at least English owner manual, tips & tricks, and a software / hardware to interface the phone with pc to manage contacts, messages, communication settings, flash card files foldering, etc.
Please be so kind to let me know if you can help me.
Many thanks in advance and greetings,
Dario

[Nippo]

Hello, I just got a CECT Q638 dual SIM from CN. Many functions are easy to understand, but I need at least English owner manual, tips & tricks, and a software / hardware to interface the phone with pc to manage contacts, messages, communication settings, flash card files foldering, etc.
Please be so kind to let me know if you can help me.
Many thanks in advance and greetings,
Dario

If you can't get manual and software from phone supplier better forget your idea to find manuals and accessories for this kind of phones :)

[tarunvishal]

brother i m repair ZT678 with heat on all ic the problem is set restart without sim and not format with infnity

so brother plz tell me where is rf ic i m think the problem is rf ic

if possible plz uplode the picture of rf ic

[sprinkler66]

Why do you say that?

[sprinkler66]

If you can't get manual and software from phone supplier better forget your idea to find manuals and accessories for this kind of phones :)

why do you say that?

[zhanglei5556]

Hy i have a Nckia g66 and i had broken the touchscreen.Please tell me where i
can find a touchscreen to replaced it.
Find in the here (www.phones-china.com):)

[zhanglei5556]

Hello Friends

Sorry when i post this message again (The searchfunktion give no result:confused:)
because i need an German Language for this phone

Please help me GURU´s for this Phone´s
Monday u can find at www.phones-china.com (http://www.phones-china.com) .Language edit tools.;)

[zhanglei5556]

ihave n82 and anycool problem these days since the only solution ihave for them is formating useing one flashtool via mtk box
ineed solutuion around mtk no talk about infininty box please ...
iam kind stuck here the green light in formating light ok but the phone still shuting down and even is some cases going off for good any tools you recomend will be fine any advice will apreciated and iam in your hands guys ....i useing the read back and even try it formating adresess from 16 down to 4 nothing happen and iam not satisfied ..PS IAM NEW IN THE FEILD OF CELL PHONE ...thanks ihope you lead me to the right way
Try use other tools.:cool:

[zhanglei5556]

Brother zhanglei i need nokla(ztc zt588) 12 pin and cect n770 pin out
You are can look this box.It is can auto search datecable pinouts.http://www.gsmhosting.com/vbb/showthread.php?t=473091

[zhanglei5556]

hello! i am new on this forum
i have a cect T689 with bluetooth, when i put sim card in phone , restart after a short time, witout the sim card work fine, please help me.
Try format it.I think is ok.:)

[zhanglei5556]

brother zhang, i need your help in hardware.
i have a CECT 828 cdma error, could you provide me the schematic diagram? or just give me the hint where is the point? :confused:
Sorry Sir.I'm not have CDMA schematic .:(

[zhanglei5556]

I am in USa and I purchased an CECT A380 from a China source. I have been trying to figure out how to activate this phone. I put SIM Card in and it says no service. I am a rookie at gadgets so I don't have a clue where to start to get service. I asked source i purchased from and seems to be as clueless as me. He keep telling me to contact my carrier and my carrier says they know nothing about the phone, so they are no help either. Do I need to change frequency on phone or do some type of firmware upgrade to unlock? I need your expertise help. Thanks
Inspection frequencies 1900, if it is fixed. No choice, I think this phone can not be used in the United States.:eek:

[zhanglei5556]

Hello, I just got a CECT Q638 dual SIM from CN. Many functions are easy to understand, but I need at least English owner manual, tips & tricks, and a software / hardware to interface the phone with pc to manage contacts, messages, communication settings, flash card files foldering, etc.
Please be so kind to let me know if you can help me.
Many thanks in advance and greetings,
Dario
According to your chip information, identify relevant information in www.phones-china.com:D (http://www.phones-china.com)

[zhanglei5556]

brother i m repair ZT678 with heat on all ic the problem is set restart without sim and not format with infnity

so brother plz tell me where is rf ic i m think the problem is rf ic

if possible plz uplode the picture of rf ic
MTK chip.RF IC is mt6129.PA IC is 3146,3166,6166…….:cool:

[celen1]

Dear Zhanglei 5556,

I live in TURKEY I bought a dual sim mobile phone from China Model: GETEK TK806 But Sim B is not activated. Sim A is OK. Now I use one sim card on Sim a slot. I tried it in China Both of Sim A and B were OK. Both of them were activated with my local(Turkey GSM operators) sim cards in Chine. What can I do Please help me I can't use two sim cards simultaniously. Does it need any software? I tried to find on the internet but I can't .When I connect the phone to PC it gives MT6227.

[Heather_88]

Hi, Mr. Zanglei, I have some problems for my new handset CDMA, The problem is the phone is not supported for all RUIM card even running the same frequency (800MHz example), but some time with speciall code phone number of RUIM card, the phone will run normally.

Example:
we have RUIM card A with phone number +886-1234XXXX, this won't run and not support
but with the same provider of RUIM card (RUIM card B) with +886-2234XXXX, it works and run normally.
Even RUIM card A and RUIM card B are both the same provider.

Does any solution???

Chipset: MT6226BA
Memory: Spansion 128MB+32MB
model: Dual mode GSM+CDMA
OS: Mediatek
Version software: Miki Project

[khalidjan]

please send codes for these mobiles for reset 6300, n73, n78, n95, etc
send it to this email: khalid_softwares@yahoo.com or khalid_softwares@hotmail.com

[wippi24]

For you zhanglei5556


Sorry when i post it again !
Please can you give an instruction do some other Software to install on the phone :D
It´s very helpfull because SW for this is phone is hard to find :mad:


Thanks for your help

[hagard]

MT6226 - 6300 Flash file with english language

I need flash file for 6300 china phone with english language..

i have nokia 6300 china no english language selection..

I'm using VEpro box

Heres the exact model
http://i49.photobucket.com/albums/f263/hagard_uragon/6300c.jpg

Thanks in advance

[Abiraman1980]

Dear Friend,

I just bought a new CECT U90 - TV mobile phone in india. I am unable to use the TV and Play video files. Could you please help me with this Problem.

Please tell me what to do?

mail your reply to k.abiraman@yahoo.com


Please send your problem here, I can help you to solve the question of software and hardware of Chinese phone

[diva2812]

Please Help,,,, Somebody ...how To Unlock Toshiba 803s!!!!!!!

[diva2812]

mr.zhanglei please help,,,l need info,,,how to unlock toshiba 803t
pleaseeeeeeeeeeeeeee mr.

[blyx21]

hello, is't possible to put java games or emulator like .nes games in my CECT C1000? and also is there a pc sync for it? hope you could upload the files. tnx in advance

heres the picture of my phone

http://img256.imageshack.us/img256/13/c1000finalua8.jpg

[diva2812]

please help about unlock toshiba 803t !!!!!!!!!:rolleyes::rolleyes::rolleyes:

[sprinkler66]

According to your chip information, identify relevant information in www.phones-china.com:D (http://www.phones-china.com)

Thanks, but I'm really unexpert. Can you guide me to reach what I need for my CECT Q638 with MTK 6228B ? I really do not know where to start...
Still many thanks in advance for helping

[elgato]

I NEED chinees nokia 5200 pinout IS 10 PIN:rolleyes:

[TPTCELL]

hallo sir i have one n95 chinas phone big screen one it is in dead posation when we checked batt conectors it is showing shortis ther any selouation

[Tomis777]

Hi mate, I have got a problem with this phone 奧特F9 500 ....where I can download something for this phone? ( games, application...) :eek:

[diva2812]

mr zanglei help me please,,,l have toshiba 803T
how to unlock toshiba 803T,,,l want to use in indonesia
l want to know that can be work !!!! PLEASE YAAA:cool::cool:

[dexters]

I have one ZTC ZT8380 mobile which is not booting on power on. When it is switched ON the progress bar shows upto 100% and the phone hangs.
Give me a solution URGENT

[levicabatana]

Hi sir I have mpeg 4 T689 china phones dual sim most of my problem is sim B not working do you have any Idea on this? what parts should reheat or replace? hope you can help me. thanks

[mobilewarriors]

my spice s600 displayed sim acces error any solution for the probiem

[levicabatana]

Hi mr zhanglei can you help me cect t689 sim b problem which parts should I reheat? or can you give me a diagram? thanks

[bimbogo]

Originally Posted by bimbogo
hello! i am new on this forum
i have a cect T689 with bluetooth, when i put sim card in phone , restart after a short time, witout the sim card work fine, please help me.




zhanglei5556
Try format it.I think is ok.



it is does not work with format the phone, can u give me something else, please

[mote15147]

Please send your problem here, I can help you to solve the question of software and hardware of Chinese phone

I need your help with CECT P168 phone. I was told to enter eng. code *#6810# then hit send.
Now I am no longer able to enter eng. code *#3646633# to make adjustments as needed. Original problem was that no sound from speakers, just headphones. Used to go into *#3646633# and set sound to normal and speakers would work while powered up. When I would power done and restart No speakers again and would have to repeat same again. Now I can't even get in to *#3646633# any more to adjust sound setting. What can I do to undo *#6810#. then what can I do to make speakers work all the time after restart ?
Would appreciate any help with these problems.

[mote15147]

I need your help with CECT P168 phone. I was told to enter eng. code *#6810# then hit send.
Now I am no longer able to enter eng. code *#3646633# to make adjustments as needed. Original problem was that no sound from speakers, just headphones. Used to go into *#3646633# and set sound to normal and speakers would work while powered up. When I would power done and restart No speakers again and would have to repeat same again. Now I can't even get in to *#3646633# any more to adjust sound setting. What can I do to undo *#6810#. then what can I do to make speakers work all the time after restart ?
Would appreciate any help with these problems.

[tanvir_guru]

Plz help china mobile chip is not mtk
What about sky or spactra Chip Any news plz help

[mohit_kripalu01]

Dead Zt-530
n hang
http://i6.tinypic.com/6xh77du.jpg

[eutako]

hi! my problem here's all about the software of my chinise mobile phone namely CECT E808. i realy need games, pc suite, themes and other tools software that could run on my unit. I think the OS of this MTK, then if i used the bluetooth, the divice name appear is MEDIATEK, can you pls help me on this, thank and merry x-mas to u...

[cell2cellphone]

hello i have 6300 china phone restart and heating very much helppppppppppppppppppppppppp

[boza779]

i have china mobile its kind is 2gsm without simcard work 100% but when i put simcard it hang turn on and off what can i do

[calvinpower]

i have china mobile its kind is 2gsm without simcard work 100% but when i put simcard it hang turn on and off what can i do

Verify your model please………
As far as I know auto restart can easily be cured by infinity box or mtk tool
All you need to do is to format the phone. That’s all

[jacky3men]

My friend bought a cellphone from China ( EASYCALL P810 ) for me. It's maual is Chinese language. I'm looking for a English manual for operating. Can you find it for me or where I can download it?
Thanks
Jacky3men

[jacky3men]

My friend bought a cellphone from China ( EASYCALL P810 ) for me. It's maual is Chinese language. I'm looking for a English manual for operating. Can you find it for me or where I can download it?
Thanks
Jacky3men

[birocip]

Please need schematic for Cect t689
Thanks

[ansari123]

According to your chip information, identify relevant information in www.phones-china.com:D (http://www.phones-china.com)

how to make login on this forum plz help me ???

[tkowsar]

its very easy, just register and login. u do must.

[tkowsar]

i have china mobile its kind is 2gsm without simcard work 100% but when i put simcard it hang turn on and off what can i do


just format ur phone problem solv 100%

[tkowsar]

hello i have 6300 china phone restart and heating very much helppppppppppppppppppppppppp


for heating, ur phone have short (v+ and gnd same) so need to remove short first. try in charging and power section, try to remove parts.

for restart, format ur phone, problem solv.