Please send your problem here,of china phone!

[zhanglei5556]

Please send your problem here, I can help you to solve the question of software and hardware of Chinese phone

[zhanglei5556]

Hope that the publication of the telephone when you pictures and models of the chip to here !

[pradeeprajmbbs]

where will be the softwares for china mobiles will be available. i need softwares tat work in china mobile.

thanks in advance

[bumzuco]

how i put games in china mobiles?

[leszekte]

i need webcam driver for chinese mp4 phone.
Windows xp see this webcam as "imagic webcam"
On the memory card is folder "pccamdrivers" but not work.
http://img263.imageshack.us/img263/1920/2152663253dl5.jpg

[Abussabah]

i flashed a motorola L6 from china only language file. but after flsashing that became boot mode. any solution for that



M A Sabah
Malappuram

[Icemanoff]

Please send your problem here, I can help you to solve the question of software and hardware of Chinese phone

Do You have Fullflash for Nokia 8800,CPU MT6226BA ,flash Samsung 128+32Mb KAD060300B ?

[gibelcom]

Needed full flash image of Huayu CL189 (dual SIM): MTK_ROMINFO_v04MTK26_05C_DS500A_PCB01_GPRS_MT6226_ S01.MAUI_05C_W06_16

[zhanglei5556]

where will be the softwares for china mobiles will be available. i need softwares tat work in china mobile.

thanks in advance
Please make it clear you need something OK?

[zhanglei5556]

how i put games in china mobiles?
Only a small part of the game MT6226BA support JAVA

[zhanglei5556]

i need webcam driver for chinese mp4 phone.
Windows xp see this webcam as "imagic webcam"
On the memory card is folder "pccamdrivers" but not work.
http://img263.imageshack.us/img263/1920/2152663253dl5.jpg
Please indicate the phone models

[zhanglei5556]

i flashed a motorola L6 from china only language file. but after flsashing that became boot mode. any solution for that



M A Sabah
Malappuram


Sorry, I only here to answer the phone production in China, but you can look at your code language pack. You write in the national language code can solve this problem

[zhanglei5556]

Needed full flash image of Huayu CL189 (dual SIM): MTK_ROMINFO_v04MTK26_05C_DS500A_PCB01_GPRS_MT6226_ S01.MAUI_05C_W06_16
Please telephone the release of the pictures here .

[sallu]

Please make it clear you need something OK?
Please suggest the best flasher for china mobiles
any free software u can suggest??

[zhanglei5556]

Do You have Fullflash for Nokia 8800,CPU MT6226BA ,flash Samsung 128+32Mb KAD060300B ?
Is this phone ?I hope to photo information.
http://rapidshare.com/files/46154797/OK_U8800.rar

[zhanglei5556]

Do You have Fullflash for Nokia 8800,CPU MT6226BA ,flash Samsung 128+32Mb KAD060300B ?
Is this phone ?I hope to photo information.

[zhanglei5556]

Do You have Fullflash for Nokia 8800,CPU MT6226BA ,flash Samsung 128+32Mb KAD060300B ?

Is this phone ?I hope to photo information.
http://rapidshare.com/files/46154797/OK_U8800.rar
To see if this is the phone ?

[leszekte]

Please indicate the phone models

How indicate? it is no name phone....
Brand on frontpanel is "DIAMOND"

IMEI is "0000000000000"
On the label under battery is barcode and "S/N :TD800609104126
Ver :V1,5 Samsung"

[leszekte]

http://img111.imageshack.us/img111/5018/hpim1937uz1.jpghttp://img126.imageshack.us/img126/3954/hpim1935yl1.jpghttp://img254.imageshack.us/img254/868/hpim1933sk6.jpghttp://img119.imageshack.us/img119/1459/hpim1934ed6.jpg

[zhanglei5556]

Please suggest the best flasher for china mobiles
any free software u can suggest??

We now is the most commonly used chip MTK .
http://www.gsmhosting.com/vbb/showthread.php?t=403253
Do not know can help you

[zhanglei5556]

How indicate? it is no name phone....
Brand on frontpanel is "DIAMOND"

IMEI is "0000000000000"
On the label under battery is barcode and "S/N :TD800609104126
Ver :V1,5 Samsung"
I am sorry I can only provide font software. Those small driver software and I have not had a way.

[zhanglei5556]

Chinese mobile phone chips on a common basis in future mobile phone chips released the things you need !

[zhanglei5556]

Chinese mobile phone chips on a common basis in future mobile phone chips released the things you need !
Then above the chip Photo Please keep in mind .

[Dilip_Nath]

Hello,

I have formatting a Sprint mobile which model is: 7700; With MTK-Box. The result that phone is dead. That phone problem was 'Phone Code Lock", So what's wrong with me? Please let me know and I need solution. Please help.

wbr

[leszekte]

I am sorry I can only provide font software. Those small driver software and I have not had a way.
chipset is under metal cover .
http://img170.imageshack.us/img170/356/hpim1939ml6.jpghttp://img118.imageshack.us/img118/4655/hpim1944xy5.jpghttp://img118.imageshack.us/img118/8862/hpim1941qy4.jpg

Dear zhanglei5556 !
Maybe You have webcam driver file for other chinese phone with camera?
my mail : wizja@centrum.sk

[zhanglei5556]

chipset is under metal cover .
http://img170.imageshack.us/img170/356/hpim1939ml6.jpghttp://img118.imageshack.us/img118/4655/hpim1944xy5.jpghttp://img118.imageshack.us/img118/8862/hpim1941qy4.jpg

Dear zhanglei5556 !
Maybe You have webcam driver file for other chinese phone with camera?
my mail : wizja@centrum.sk
http://www.gsmhosting.com/vbb/showthread.php?t=424983
You are not here to see the things you need

[leszekte]

This MTK Webcam Driver not work with my phone.

[zhanglei5556]

This MTK Webcam Driver not work with my phone.

It had nothing to do because they can not find a small software

[Icemanoff]

To see if this is the phone ?
Not it.
This is it(see photo)

[zhanglei5556]

Not it.
This is it(see photo)
Your machine might be between the CPU and FLASH is a password.
Solving your password solution?

[zhanglei5556]

Not it.
This is it(see photo)

Flash and the CPU may be encrypted .
Solving your password solution?

[.::Zafar Communication::.]

hi

have chiense mobile n79 everything working ok but problem when u use it it goes to insert sim card again power on working and goes to insert sim card when u use it


please any idea comments




thanks & regards


Zafar Janjua

[rajiv007]

here is my problem

http://www.gsmhosting.com/vbb/showpost.php?p=2617323&postcount=123

help me

[/ARIF/]

i need to china phone flash software without any box

[kabirhossain]

china phone flash/unlock/format no need box just searce pin out.

[gsmxpert]

which box can flash these models 4 now pls send me info
andy4wisdom@bornagain.com

[Icemanoff]

Flash and the CPU may be encrypted .
Solving your password solution?
There's no passwords,juste need correct flash,and i can't find it anywhere!
About encrypting - it's 6226,and of course it's crypted
I have MTKDecryte,and it's works,but i don't have the flash file ((((((((

[/ARIF/]

how to possible china phone flashing
any box or crack soft

[*Diablo*]

NEW CHiNESE PHONES COMES WITH CPU MT6228, NOR flash HYUNIX which not supported with any program for this time, and NAND flash HYUNIX also which support JUST READ FUNCTION in all programs, but no program which can flash NAND.
@zhanglei5556 - have u any new version of MTK FlashTool which can flash NAND ? or suport new Hynix nor flash types ?
last version of MTK FlashTool 4.10 not suport

[zhanglei5556]

hi

have chiense mobile n79 everything working ok but problem when u use it it goes to insert sim card again power on working and goes to insert sim card when u use it


please any idea comments




thanks & regards


Zafar Janjua


I think your problem is hardware sim card please check the relevant circuit .

[zhanglei5556]

here is my problem

http://www.gsmhosting.com/vbb/showpost.php?p=2617323&postcount=123

help me
Dead phone does not support USB cable repair.

[zhanglei5556]

i need to china phone flash software without any box
Please state your chips need software platform

[zhanglei5556]

china phone flash/unlock/format no need box just searce pin out.
Please wait until we are producing the restoration of China's telephone box software

[zhanglei5556]

NEW CHiNESE PHONES COMES WITH CPU MT6228, NOR flash HYUNIX which not supported with any program for this time, and NAND flash HYUNIX also which support JUST READ FUNCTION in all programs, but no program which can flash NAND.
@zhanglei5556 - have u any new version of MTK FlashTool which can flash NAND ? or suport new Hynix nor flash types ?
last version of MTK FlashTool 4.10 not suport
http://rapidshare.com/files/46737701/MTK.rar
Look at this can help you.Good luck to you.

[*Diablo*]

http://rapidshare.com/files/46737701/MTK.rar
Look at this can help you.Good luck to you.

Its Joke ????? this is old version 3.2.1001 =) All have 4.10.000.

[psp_ps2_2005]

plz plz plz:i need software to repair or format anycool d66 without using any box(works with usb cable)...this phone works properly offline..but when i insert sim it resets every 10s....help me plz

thx in advance

[psp_ps2_2005]

someone told me that mtk tool software works with usb cable(without using
mtk box)....is that right?????

[/ARIF/]

i want to china phone flash without any box

[netguru]

Hello
I have chinese mobile named O3 838. Now i have a problem. when i start my phone and when it searching network the display is off or starting blinking. what i have to do to solve this problem.

[zhanglei5556]

Its Joke ????? this is old version 3.2.1001 =) All have 4.10.000.
Your question must wait until the platform upgrade

[zhanglei5556]

plz plz plz:i need software to repair or format anycool d66 without using any box(works with usb cable)...this phone works properly offline..but when i insert sim it resets every 10s....help me plz

thx in advance
http://rapidshare.com/files/46928251/ANYCOOLD66.rar
This is the information you need hope to help you resolve your problem.Good luck !

[zhanglei5556]

someone told me that mtk tool software works with usb cable(without using
mtk box)....is that right?????
MTK Tool does not support USB cable .

[zhanglei5556]

i want to china phone flash without any box
Professional solve the telephone box is in preparation !

[zhanglei5556]

Hello
I have chinese mobile named O3 838. Now i have a problem. when i start my phone and when it searching network the display is off or starting blinking. what i have to do to solve this problem.
Your question is the issue of power amplifiers. Try to change it may solve your problem.

[psp_ps2_2005]

(zhanglei5556) thank you very much for uploading this rar..but i downloaded
the file and extracted it then bin file appeared with size 16mb..i dont know how to use this file and any format it needs to be usable file.........

thx man

[zhanglei5556]

(zhanglei5556) thank you very much for uploading this rar..but i downloaded
the file and extracted it then bin file appeared with size 16mb..i dont know how to use this file and any format it needs to be usable file.........

thx man
Use the http : / / rapidshare.com/files/46737701/MTK.rar workers with.

[psp_ps2_2005]

zhanglei5556
this link does not work..plz correct it

[psp_ps2_2005]

ok ok i downloaded this file.....did you mean that i can use this software
with usb cable to format my phone??????????

[sallu]

use unibox and make connection to rx tx ground and then flash ur phone

[zhanglei5556]

ok ok i downloaded this file.....did you mean that i can use this software
with usb cable to format my phone??????????
You need to produce for cables com port.GND, TX and RX.

[hrc_mitu]

if any one have china mobiles hardware diagram please send me link or please post picture of hardware solution

[/ARIF/]

how to flash all china mobile

[cdma-india]

http://www.comwise.com.hk/en/cp/d120.html

required flah file for this model searching from 1 month but still not found

plz help if any one have

[psp_ps2_2005]

(zhanglei5556)many many many thx man for following and answering my questions....thank you very much again..................

[cdma-india]

hallow masters ....., any one is there?

[QTEL]

You need to produce for cables com port.GND, TX and RX.

Hi
i can you please give mea Manual for MKT Tool( How to flash D66 phone)
i have download the tool and flash file.


Regards.

[hrc_mitu]

zhanglei5556
do u have hardware solution for chinies mobile .... like I have problem .. finding keypad IC...can u help me with this .......do u have circuit diagram ? please help me

[zhanglei5556]

(zhanglei5556)many many many thx man for following and answering my questions....thank you very much again..................
Your question only waiting for the box we developed after the settlement

[zhanglei5556]

http://www.comwise.com.hk/en/cp/d120.html

required flah file for this model searching from 1 month but still not found

plz help if any one have
http://rapidshare.com/files/47273029/d120.rar
Hope this flash file can help you
good luck!

[hrc_mitu]

zhanglei5556 hay can u give me any solution??????????????????

[zhanglei5556]

zhanglei5556
do u have hardware solution for chinies mobile .... like I have problem .. finding keypad IC...can u help me with this .......do u have circuit diagram ? please help me
please send your problem pictuer at here.

[zhanglei5556]

zhanglei5556 hay can u give me any solution??????????????????
OK,but you need send here for phones porblem picture.
Otherwise, I do not know what is your phone

[zhanglei5556]

hallow masters ....., any one is there?
Almost 95% can solve the above problems .

[cdma-india]

http://rapidshare.com/files/47273029/d120.rar
Hope this flash file can help you
good luck!

big big thanks i will check and replay u:)

[*Diablo*]

big big thanks i will check and replay u:)

What is the flash type on this phone ?

[cdma-india]

hallow my phone is ok now incoming outoing ok but only white display on screen , i m sure display is 100% ok only software problem is there , whats wrong ?????

[mohsin-*]

china mobile ok with out sim card but off on serching when i put sim whats the problam

[cdma-india]

What is the flash type on this phone ?

this is complete log with infinity


COM1 [Serial0] selected
Device: Autodetect
Checking data, wait...
advanced flash detection active
Action: reset
Boot...
Press and HOLD Power button now !
baud autodetection active
19200
Connecting, wait...
Initializing[6227:8A02:8A01]...
Release Power button now !
Boot Done
Initialize...
detecting chip #00 in region #00...
flash: 89880F00010001
flash: 89880F00000000
flash: Intel Intel/Sharp ext [def 0004x008000 007Fx020000] 16Mb
number of flash chip/regions detected: 01/01
Initialize Done
Set baud...
slowest
Set baud Done
Check space...
operation mode: Fast detection mode
device parameters autodetection in progress..
detecting chip #00 in region #00...
flash: 89880F00010001
flash: 89880F00000000
flash: Intel Intel/Sharp ext [def 0004x008000 007Fx020000] 16Mb
number of flash chip/regions detected: 01/01
total flash region size: 01000000
detecting eeprom area in 1 chip(s)...
flash: 89880F00010001
flash: 89880F00000000
checking area[00000000]: 00000000-00FFFFFF...
Can't detect eeprom area
Do you want to use standard eeprom address[00E00000] ?
standard eeprom address selected by user
detecting eeprom size...
eeprom size: 00200000
eeprom chip: 00
eeprom area detected[00000000]: 00E00000-00FFFFFF
detect device identification, method #1...
detection phase #1...
protocol version: 0004
2nd [standard] (or higher) generation model detected
version sw1: D120_A212_PCB01_GPRS_MT6227_S01.D120_A212_1_08_0.B IN
version sw2: D120_A212_1.08.0
detection phase #3...
.................................................. ..............
detect device parameters finished
flash: 89880F00010001
flash: 89880F00000000
Check space Done
Manipulation...
Manipulation Done
Finalization...
Finalization Done
Write...
formatting...
flash: 89880F00010001
flash: 89880F00000000
Write Done
file saved: backup_system_log[D120_A212_PCB01_GPRS_MT6227_S01.D120_A212_1_08_0.B IN]_20070621-201441.B0X.bin
Finished, time used: 55 sec
Remove/Install battery now !
Loading file v.02...
data error
Loading failed, probably damaged data file.
COM1 [Serial0] selected
Device: Autodetect
Checking data, wait...
advanced flash detection active
Action: read/check detailed information
Boot...
Press and HOLD Power button now !
baud autodetection active
19200
Connecting, wait...
Initializing[6227:8A02:8A01]...
Release Power button now !
Boot Done
Initialize...
detecting chip #00 in region #00...
flash: 89880F00010001
flash: 89880F00000000
flash: Intel Intel/Sharp ext [def 0004x008000 007Fx020000] 16Mb
number of flash chip/regions detected: 01/01
Initialize Done
Set baud...
slowest
Set baud Done
Check space...
operation mode: Fast detection mode
device parameters autodetection in progress..
detecting chip #00 in region #00...
flash: 89880F00010001
flash: 89880F00000000
flash: Intel Intel/Sharp ext [def 0004x008000 007Fx020000] 16Mb
number of flash chip/regions detected: 01/01
total flash region size: 01000000
detecting eeprom area in 1 chip(s)...
flash: 89880F00010001
flash: 89880F00000000
checking area[00000000]: 00000000-00FFFFFF...
Can't detect eeprom area
Do you want to use standard eeprom address[00E00000] ?
standard eeprom address selected by user
detecting eeprom size...
eeprom size: 00200000
eeprom chip: 00
eeprom area detected[00000000]: 00E00000-00FFFFFF
detect device identification, method #1...
detection phase #1...
protocol version: 0004
2nd [standard] (or higher) generation model detected
version sw1: D120_A212_PCB01_GPRS_MT6227_S01.D120_A212_1_08_0.B IN
version sw2: D120_A212_1.08.0
detection phase #3...
.................................................. ..............
detect device parameters finished
file saved: backup_system_log[D120_A212_PCB01_GPRS_MT6227_S01.D120_A212_1_08_0.B IN]_20070621-202057.B0X.bin
Finished, time used: 34 sec
Remove/Install battery now !

[jothi737]

i have GM608 restart problem which software use what cable use?

[zhanglei5556]

china mobile ok with out sim card but off on serching when i put sim whats the problam
You should be the power of the transmitter, try to replace RF3146 may solve your problem.

[zhanglei5556]

i have GM608 restart problem which software use what cable use?
This should be MTK phone chips. I repaired the chip can only use the COM port cable

[zhanglei5556]

this is complete log with infinity


COM1 [Serial0] selected
Device: Autodetect
Checking data, wait...
advanced flash detection active
Action: reset
Boot...
Press and HOLD Power button now !
baud autodetection active
19200
Connecting, wait...
Initializing[6227:8A02:8A01]...
Release Power button now !
Boot Done
Initialize...
detecting chip #00 in region #00...
flash: 89880F00010001
flash: 89880F00000000
flash: Intel Intel/Sharp ext [def 0004x008000 007Fx020000] 16Mb
number of flash chip/regions detected: 01/01
Initialize Done
Set baud...
slowest
Set baud Done
Check space...
operation mode: Fast detection mode
device parameters autodetection in progress..
detecting chip #00 in region #00...
flash: 89880F00010001
flash: 89880F00000000
flash: Intel Intel/Sharp ext [def 0004x008000 007Fx020000] 16Mb
number of flash chip/regions detected: 01/01
total flash region size: 01000000
detecting eeprom area in 1 chip(s)...
flash: 89880F00010001
flash: 89880F00000000
checking area[00000000]: 00000000-00FFFFFF...
Can't detect eeprom area
Do you want to use standard eeprom address[00E00000] ?
standard eeprom address selected by user
detecting eeprom size...
eeprom size: 00200000
eeprom chip: 00
eeprom area detected[00000000]: 00E00000-00FFFFFF
detect device identification, method #1...
detection phase #1...
protocol version: 0004
2nd [standard] (or higher) generation model detected
version sw1: D120_A212_PCB01_GPRS_MT6227_S01.D120_A212_1_08_0.B IN
version sw2: D120_A212_1.08.0
detection phase #3...
.................................................. ..............
detect device parameters finished
flash: 89880F00010001
flash: 89880F00000000
Check space Done
Manipulation...
Manipulation Done
Finalization...
Finalization Done
Write...
formatting...
flash: 89880F00010001
flash: 89880F00000000
Write Done
file saved: backup_system_log[D120_A212_PCB01_GPRS_MT6227_S01.D120_A212_1_08_0.B IN]_20070621-201441.B0X.bin
Finished, time used: 55 sec
Remove/Install battery now !
Loading file v.02...
data error
Loading failed, probably damaged data file.
COM1 [Serial0] selected
Device: Autodetect
Checking data, wait...
advanced flash detection active
Action: read/check detailed information
Boot...
Press and HOLD Power button now !
baud autodetection active
19200
Connecting, wait...
Initializing[6227:8A02:8A01]...
Release Power button now !
Boot Done
Initialize...
detecting chip #00 in region #00...
flash: 89880F00010001
flash: 89880F00000000
flash: Intel Intel/Sharp ext [def 0004x008000 007Fx020000] 16Mb
number of flash chip/regions detected: 01/01
Initialize Done
Set baud...
slowest
Set baud Done
Check space...
operation mode: Fast detection mode
device parameters autodetection in progress..
detecting chip #00 in region #00...
flash: 89880F00010001
flash: 89880F00000000
flash: Intel Intel/Sharp ext [def 0004x008000 007Fx020000] 16Mb
number of flash chip/regions detected: 01/01
total flash region size: 01000000
detecting eeprom area in 1 chip(s)...
flash: 89880F00010001
flash: 89880F00000000
checking area[00000000]: 00000000-00FFFFFF...
Can't detect eeprom area
Do you want to use standard eeprom address[00E00000] ?
standard eeprom address selected by user
detecting eeprom size...
eeprom size: 00200000
eeprom chip: 00
eeprom area detected[00000000]: 00E00000-00FFFFFF
detect device identification, method #1...
detection phase #1...
protocol version: 0004
2nd [standard] (or higher) generation model detected
version sw1: D120_A212_PCB01_GPRS_MT6227_S01.D120_A212_1_08_0.B IN
version sw2: D120_A212_1.08.0
detection phase #3...
.................................................. ..............
detect device parameters finished
file saved: backup_system_log[D120_A212_PCB01_GPRS_MT6227_S01.D120_A212_1_08_0.B IN]_20070621-202057.B0X.bin
Finished, time used: 34 sec
Remove/Install battery now !
You may not be in the box, I only solve the telephone with our own box.

[cdma-india]

to mr-zhanglei5556

sir this log is only for to show what is chip type and flash file
file sended by u is 100% ok my set is alive again incoming outgoing ok , i flashed wih mtk software
but only problem is display is white screen , what is problem, my handset is same as u show in picture ,i want to know whats wrong , way white screen
its hardware or software .....plz only u can help me

[softbank]

hi bro;
now i use celphone in chaina. i get that celphone in japan.
i want to know that how to change celphone language!!
now i use V709sc by softbank....
i hope to use china lang in this celphone....

pls help me! tks!

[zhanglei5556]

to mr-zhanglei5556

sir this log is only for to show what is chip type and flash file
file sended by u is 100% ok my set is alive again incoming outgoing ok , i flashed wih mtk software
but only problem is display is white screen , what is problem, my handset is same as u show in picture ,i want to know whats wrong , way white screen
its hardware or software .....plz only u can help me
Should you this is a hardware problem.

[zhanglei5556]

hi bro;
now i use celphone in chaina. i get that celphone in japan.
i want to know that how to change celphone language!!
now i use V709sc by softbank....
i hope to use china lang in this celphone....

pls help me! tks!
Sorry, your phone is Japan. Telephone is not China. If you are Chinese, you can play for lizheng Advisory 021-63532609

[rajiv007]

i have china s618 DVD mobile
when i press power on mobile it says on the screen
10%, 20%, ............... 100% and light gose off nothing happen after that can help me anybody what can i do i have downloading usb cable i tried connect with infinity but it not connect (i dont also which model i have to select)

for infinity cable i m using usb to RJ45 connector

[cdma-india]

[/U]sir my mobile having original software version

D120_A212_PCB01_GPRS_MT6227_S01.D120_A212_1_08_0.B IN

and u sende me D120_A112_PCB01_GPRS_MT6227_S01.D120_A112_1_08_0.B

can u give me same flash?
thanks

[srtech]

hi
how i can Encrypt file from MT6226BA phone?

BR
SE

[dang dinh van]

Hello,

I have formatting a Sprint mobile which model is: 7700; With MTK-Box. The result that phone is dead. That phone problem was 'Phone Code Lock", So what's wrong with me? Please let me know and I need solution. Please help.

wbr
one of all china mobile format by MTK box the phone dead or read from the phone then write to phone phone is dead because MTK box is not repair file while write to phone .with chips 6226XX the phone easy dead while read and write by MTK.

[zhanglei5556]

one of all china mobile format by MTK box the phone dead or read from the phone then write to phone phone is dead because MTK box is not repair file while write to phone .with chips 6226XX the phone easy dead while read and write by MTK.
6226XX chip is encrypted. Must be declassified

[trinhngoctrung]

MTK Tool does not support USB cable .

You are wrong!
I've Read, flashed, reset user lock code by formating... and do everything with only my modified USB cable and MTK Tools! Though, I've got all thing, MTK Box, Tianmu, vepro, Inffinity. Ofcourse, it need right pinout to connect to MTK PC tools!
Look at here:
http://vietfones.com.vn/forum/showthread.php?t=1165
If the members of gsmhosting need it, I'll give here all solution in English and pictures! No box, It only for repairing read files on MT6226A, MT6226BA!

[psp_ps2_2005]

You are wrong!
I've Read, flashed, reset user lock code by formating... and do everything with only my modified USB cable and MTK Tools! Though, I've got all thing, MTK Box, Tianmu, vepro, Inffinity. Ofcourse, it need right pinout to connect to MTK PC tools!
Look at here:
http://vietfones.com.vn/forum/showthread.php?t=1165
If the members of gsmhosting need it, I'll give here all solution in English and pictures! No box, It only for repairing read files on MT6226A, MT6226BA!

tell us how to do that plz....i never got connection between my pc and chinese phone...thx in advance

[zhanglei5556]

You are wrong!
I've Read, flashed, reset user lock code by formating... and do everything with only my modified USB cable and MTK Tools! Though, I've got all thing, MTK Box, Tianmu, vepro, Inffinity. Ofcourse, it need right pinout to connect to MTK PC tools!
Look at here:
http://vietfones.com.vn/forum/showthread.php?t=1165
If the members of gsmhosting need it, I'll give here all solution in English and pictures! No box, It only for repairing read files on MT6226A, MT6226BA!
This is the RJ45 cable, USB cable connecting the mobile-phone becomes a download model. So it is not FLASH, AND READ.

[trinhngoctrung]

This is the RJ45 cable, USB cable connecting the mobile-phone becomes a download model. So it is not FLASH, AND READ.

I said that, "My modified USB cable!" RJ-45 post is an adaptor that can be used with othes Sie, Moto, LG...UFS cable, and the same way, you can make MP4 cable, that use USB to RJ-45 adaptor in the same way! Read, format, Download with MTK tool, at highest speed, like MTK box! Just modify MP4 USB cable(By re-Jump the pin, that fix RX, TX on the phone), than make it in the same with UFS cable( 2=gnd, 4=TX, 5=RX) than connect it to USB to RJ-45 adaptor, we can read, write like MTK box. By doing this way, we just have to make only ONE USB cable, that can be used with alot of kind of phone(Just change connector to phone). If you just want to use with one kind of phone, direct connect USB to virsual COM to one connector, it become exactly USB cable, that can read, write Chine phone with MTK tool!

[dang dinh van]

I said that, "My modified USB cable!" RJ-45 post is an adaptor that can be used with othes Sie, Moto, LG...UFS cable, and the same way, you can make MP4 cable, that use USB to RJ-45 adaptor in the same way! Read, format, Download with MTK tool, at highest speed, like MTK box! Just modify MP4 USB cable(By re-Jump the pin, that fix RX, TX on the phone), than make it in the same with UFS cable( 2=gnd, 4=TX, 5=RX) than connect it to USB to RJ-45 adaptor, we can read, write like MTK box. By doing this way, we just have to make only ONE USB cable, that can be used with alot of kind of phone(Just change connector to phone). If you just want to use with one kind of phone, direct connect USB to virsual COM to one connector, it become exactly USB cable, that can read, write Chine phone with MTK tool!
exactly, i modified one cable same MR TRUNG say. IT do very good for many phone . biG thanks to MR. TRUNG.

[Citizen 5]

Please send your problem here, I can help you to solve the question of software and hardware of Chinese phone
hi zangheli5556 .how r u . iam the new member of this site .and i want u to slove my problem .i have cect 689 mobile with dual sim .when i put my sim the mobile restart it self many times its china made and thanks. CITIZEN 5

[zhanglei5556]

I said that, "My modified USB cable!" RJ-45 post is an adaptor that can be used with othes Sie, Moto, LG...UFS cable, and the same way, you can make MP4 cable, that use USB to RJ-45 adaptor in the same way! Read, format, Download with MTK tool, at highest speed, like MTK box! Just modify MP4 USB cable(By re-Jump the pin, that fix RX, TX on the phone), than make it in the same with UFS cable( 2=gnd, 4=TX, 5=RX) than connect it to USB to RJ-45 adaptor, we can read, write like MTK box. By doing this way, we just have to make only ONE USB cable, that can be used with alot of kind of phone(Just change connector to phone). If you just want to use with one kind of phone, direct connect USB to virsual COM to one connector, it become exactly USB cable, that can read, write Chine phone with MTK tool!
I would like you to the method is very good. Should be able to solve some problems. We certainly hope that you share the method. Thank you

[zhanglei5556]

hi zangheli5556 .how r u . iam the new member of this site .and i want u to slove my problem .i have cect 689 mobile with dual sim .when i put my sim the mobile restart it self many times its china made and thanks. CITIZEN 5
Please describe your problem is hardware or software. It can telephone the pictures.

[psp_ps2_2005]

I said that, "My modified USB cable!" RJ-45 post is an adaptor that can be used with othes Sie, Moto, LG...UFS cable, and the same way, you can make MP4 cable, that use USB to RJ-45 adaptor in the same way! Read, format, Download with MTK tool, at highest speed, like MTK box! Just modify MP4 USB cable(By re-Jump the pin, that fix RX, TX on the phone), than make it in the same with UFS cable( 2=gnd, 4=TX, 5=RX) than connect it to USB to RJ-45 adaptor, we can read, write like MTK box. By doing this way, we just have to make only ONE USB cable, that can be used with alot of kind of phone(Just change connector to phone). If you just want to use with one kind of phone, direct connect USB to virsual COM to one connector, it become exactly USB cable, that can read, write Chine phone with MTK tool!

share pictures for your method and explain how to connect between pc and
chinese phone..is the connection needs pl2303 or what???explain that clearly plz

[SSH-GSM]

for repair all chines phone
pls call me i can help you

saeed shahhoseini

iran-tehran

0098-21-66704429
0098-9121136018

[dang dinh van]

If not repair we need TIANMU . IT repair file when write to phone .IT use file of MTK , SD box. IT repair all chips 6226XX.or We use VE dongle . IT repair file OK .

[sumitmalik]

I have a Anycool Dual SIM phone. Works fine..however, I can't figure out how to sync my contacts in the PC with the phone.

Please help! Thanks

[zhanglei5556]

If not repair we need TIANMU . IT repair file when write to phone .IT use file of MTK , SD box. IT repair all chips 6226XX.or We use VE dongle . IT repair file OK .
VE box can be. But the recent listing to a new box. CPF BOX

[trinhngoctrung]

share pictures for your method and explain how to connect between pc and
chinese phone..is the connection needs pl2303 or what???explain that clearly plz

I'll share here all the pictures and the method, that can help you easily connect your China phone and more than that, Samsung, Sie, OKWap, LG, Innostream...can connect to PC, to flash, Unlock, Read, Write, Format(China Phone option only)

Prepare:
-01 USB cable, that has USB to Virtual COM card, using PL-2303, ARK3116S, or C261 USB Cable, that you have it with driver( These cables packed with some kinds of phone)
-01 RJ-45 port, that you can buy at Computer service or from a discard LAN Card or Net switch, or box, PC mainboard...
Doing:
For easy to explain, I'll use PL-2303. And to take all advantage of UFS cable kit, we make all kind of phone self-made Cables following UFS standard, so that, we can use UFS cable with this Virsual COM, like C19x Moto, 2xx Sie, 4xx Sie...
Solder RX, TX, GND as this Picture:

http://i125.photobucket.com/albums/p64/trinhtrung/USBtoUFS.jpg

All done of the main part!
For the other part(Connect to phone part), you can use Connector from USB cable of the phone, Die Charger to modify them, that fix the pinout, for example:
Cect-S560
Cect-Q618
Nokia-N73
Nokia-N83
Nokia-N95
Nokia-N730

connector_2x6_mini
1:
2: Vcc
3: Vcc
4: USB D+
5: USB D-
6: Rx
7: Tx
8: Gnd
9: HF ear
10: HF ear
11: HF mic

(Just care of RX, TX, and GND)

Then, using nutcracker make the male RJ-45 (Following UFS cable standard) for each kind of the phone. The result is here:

http://i125.photobucket.com/albums/p64/trinhtrung/China8Pin.jpg



Now, you can read, write, format MP4 China Phone, using your self-made USB to Virtual Com
Note: Somebody said, MTK tools can't run without MTK box! That is not true! It can run well, need no box, Just with a COM cable, or a USB to COM like that, you can run all Ver. Of MTK tool!
I'll add here some pictures of Phone connecting to PC through my self made cable, tomorrow, i'll take some of China phone connecting screen shot pictures! If you interesting, call at my site, it's an Vietnamese 4r, but you can post reques for China Pinout, flash file or any solution in English, I'll help you!

Here's the pictures:

Inno90

http://i125.photobucket.com/albums/p64/trinhtrung/Inno90_Flashing_Done.gif

SIE A65

http://img201.imageshack.us/img201/7610/a65tz4.jpg

SamE900

http://i125.photobucket.com/albums/p64/trinhtrung/UnlockE900_OK.gif


LG (Vygis cr**ck)

http://i125.photobucket.com/albums/p64/trinhtrung/LG1100.gif


OKWAP

http://img384.imageshack.us/img384/3984/readingokwapbf9.gif

I'll capture some China Phone connecting to MTK tools through this USB cable and post here soon!

Goodluck!

[trinhngoctrung]

Sorry for too long post! I'll make, and post here all the pictures, step by step, that lead you connect and do all the job with China phone when you successfully make the cable! For pinout, you can search on this forum, there were some good ones! File of China phone are too many(of mine, more than 20GB), that can only share some here! For more information, please visit my site!
Best regards to all!

[psp_ps2_2005]

thank you sir trung so much but you forgot sharing any information about
(b+) pin or the vcc...did you mean that we neglect b+ and just connecting
(tx; rx;gnd) to the phone through flashing process...in this case we must
remain the battery in the phone..or connecting b+ and remove battery through flashing process.........what do you say about that??????????

[trinhngoctrung]

First, here's the format China phone, video capture on my screen, I used Cable Moto C261 USB modified, because, MTK use PL-2303 for USB Interface, so, if I use DKU5 Modified cable, that use this chip, someone may think, I use MTK box to do that!

DOWNLOAD (http://p1.hostingprod.com/@hatde.biz/trinhngoctrung/My_Pictures/Format_MTK.avi)

User and pass:vietfones

And here's My Computer Check:

DOWNLOAD (http://p1.hostingprod.com/@hatde.biz/trinhngoctrung/My_Pictures/MyComputer_Check.avi)

Video of reading and Writing read Flash file back to the phone will be uploaded later!
If you need my tool, I'll share it free! Extraxtly, it's China MTK tool original! I just edit some thing, so that, it can recognize some new flash chip with new Flash ID, that MTK too slow to support!

[psp_ps2_2005]

i have another question :how to determine (tx;rx) by using oscilloscope machine...i dont know the output signal form of tx&rx on oscilloscope screen?????????i think that this method is the easist way to determine (tx;rx)
tips for any chinese phone....

[trinhngoctrung]

thank you sir trung so much but you forgot sharing any information about
(b+) pin or the vcc...did you mean that we neglect b+ and just connecting
(tx; rx;gnd) to the phone through flashing process...in this case we must
remain the battery in the phone..or connecting b+ and remove battery through flashing process.........what do you say about that??????????

Yes, for simply in modifing cable, Just use 3 pin of connector! Remaining the battery in the phone, or you can supply it with any Power Supplier!

[trinhngoctrung]

i have another question :how to determine (tx;rx) by using oscilloscope machine...i dont know the output signal form of tx&rx on oscilloscope screen?????????i think that this method is the easist way to determine (tx;rx)
tips for any chinese phone....

Review this, my friend!

I'll add here some pictures of Phone connecting to PC through my self made cable, tomorrow, i'll take some of China phone connecting screen shot pictures! If you interesting, call at my site, it's an Vietnamese 4r, but you can post reques for China Pinout, flash file or any solution in English, I'll help you!

Best regards!

PS/ It's 3.30 AM in my country now, I must go to bed! See all you tomorrow! Goodnight!

[psp_ps2_2005]

thx so much....goodnight my friend

[zhanglei5556]

Review this, my friend!



Best regards!

PS/ It's 3.30 AM in my country now, I must go to bed! See all you tomorrow! Goodnight!
Thank you very much for the pay, my dear friends trinhngoctrung. You hope you can continue to help. Thanks to the Vietnamese.

[trinhngoctrung]

All TUT' for China phone Readback, Download, Format...Using USB cable with MTK tool is here! Video capture, step by step!

Format (http://p1.hostingprod.com/@hatde.biz/trinhngoctrung/My_Pictures/format.wmv)

Readback (http://p1.hostingprod.com/@hatde.biz/trinhngoctrung/My_Pictures/Readback.wmv)

Download (http://p1.hostingprod.com/@hatde.biz/trinhngoctrung/My_Pictures/download.wmv)

User and pass to access: vietfones

[zhanglei5556]

All TUT' for China phone Readback, Download, Format...Using USB cable with MTK tool is here! Video capture, step by step!

Format (http://p1.hostingprod.com/@hatde.biz/trinhngoctrung/My_Pictures/format.wmv)

Readback (http://p1.hostingprod.com/@hatde.biz/trinhngoctrung/My_Pictures/Readback.wmv)

Download (http://p1.hostingprod.com/@hatde.biz/trinhngoctrung/My_Pictures/download.wmv)

User and pass to access: vietfones
this very good!thanx

[trinhngoctrung]

this very good!thanx

All is done on my PC, Using C261 Motorola USB Modified cable(check My Computer_Check Video for that)!
All member here can do it, just simplly modify any USB cables you have in hand with the Driver!

Here is My Re-Edited MTK tool, that running on my PC

DOWNLOAD (http://p1.hostingprod.com/@hatde.biz/trinhngoctrung/FlashTool_v2.9.1007_6228.rar)

User and Pass:vietfones

Note: Re-Edit from MTK Original Tools, for Personal usage only!

Goodluck!

[psp_ps2_2005]

thank you very much sir trung....i tried this method by installing pl2303 on
my tornado...i hav the new pl2303 driver version&the prpcess is done successfully

[boubscisse]

hi everybody i have a plbm i have setool but i don t know how to daonload the flash files sony ericsson plz help me explain steep by steep

[ecstatichustler]

i need da software of CHINA MOBILES n flash files of all the cell phones

[trinhngoctrung]

i need da software of CHINA MOBILES n flash files of all the cell phones

Tool for flashing, is in 117 post!
File for China phones, consits of thousands models, my friend!

[HungHa]

Thank Mr trinhngoctrung !

[khem]

PDA CECT T520 CHINA PHONE

WHEN I INSERT SIM, PHONE RE-START..
WITHOUT SIM IT IS WORKING FINE...
PLZ HELP ME TO SOLVE THIS SOLUTION

THNX


B.R,
>ll<hemal

[trinhngoctrung]

PDA CECT T520 CHINA PHONE

WHEN I INSERT SIM, PHONE RE-START..
WITHOUT SIM IT IS WORKING FINE...
PLZ HELP ME TO SOLVE THIS SOLUTION

THNX


B.R,
>ll<hemal

1-Check the PA (By Cutting Vcc for it)
2-Rehot or re-solver CPU IC (MT6226BA)
Goodluck!

[psp_ps2_2005]

1-Check the PA (By Cutting Vcc for it)
2-Rehot or re-solver CPU IC (MT6226BA)
Goodluck!

i solved this problem just by formatting these phones and didnt execute any hardware solution.........

[psp_ps2_2005]

sir(zhanglei5556) ...what is your informations about the new version of (arsa)
welding system?????i thing that its the best in china for uBGA hardware reworks..its pullulant more than irda welding station

[zhanglei5556]

sir(zhanglei5556) ...what is your informations about the new version of (arsa)
welding system?????i thing that its the best in china for uBGA hardware reworks..its pullulant more than irda welding station
The latest version is to repair software. Production is because there are many details. Please wait

[zhanglei5556]

i need da software of CHINA MOBILES n flash files of all the cell phones
China's model is the telephone number. But the same name. You need to ask for the issuance of a telephone Photo here. Do my best to help you resolve.

[samer8008]

N96i
When I Insert Sim, Phone Re-start..
Without Sim It Is Working Fine...
Plz Help Me To Solve This Solution
Or How Can I Format It Which Any Tools I Can? Infnity Box Solved It?

[jignesh_1000]

Sir same here hv nokla N77 mobile is working proper when it is with out sim card will butting sim card mobile re-starting again and again what the problem



and aslo hv one a5 that tuch paid is not working.......................

[zhanglei5556]

N96i
When I Insert Sim, Phone Re-start..
Without Sim It Is Working Fine...
Plz Help Me To Solve This Solution
Or How Can I Format It Which Any Tools I Can? Infnity Box Solved It?
Please phone chips. MTK. Philips, AGERE, SKY, SPREADTRUM Spreadtrum, ADI and TI? Do not insert the SIM can be allocated SOS? If it is perhaps software problems. If not. The problem is PA. Good luck!

[zhanglei5556]

Sir same here hv nokla N77 mobile is working proper when it is with out sim card will butting sim card mobile re-starting again and again what the problem



and aslo hv one a5 that tuch paid is not working.......................
Please see above. good luck!

[jignesh_1000]

Please see above. good luck!

can see sos call get connect to network but after sim not working is thir any frre softare to flash

[.::NaNTeC::.]

any one can solve my proplem??????????

in the first my mobile nokia n96i chine has restart if sim card was inside

i formatted it by mtk tool and it be all fine exept (toutch screen it was opposite done !!!! if i press left ........the right will active !!!!)

how to solve my probllllllem ???


i wiat ur help

[pcrjws]

Hey. I was wondering if anyone could help me out with putting software and games on the CECT P168 phone. Thanks a lot.

[buntybauva]

hii i have sed ak606 mobile tv phone...... phones excellent but when i power off the phone then i cant power on...ihave to remove the battery nd then it powers on ....so what exatly the problem might be?

[zhanglei5556]

can see sos call get connect to network but after sim not working is thir any frre softare to flash

Please release your phone photos!

[zhanglei5556]

any one can solve my proplem??????????

in the first my mobile nokia n96i chine has restart if sim card was inside

i formatted it by mtk tool and it be all fine exept (toutch screen it was opposite done !!!! if i press left ........the right will active !!!!)

how to solve my probllllllem ???


i wiat ur help
Please use MTK4. 10 ,Perhaps you will help solve the problem

[malikzulfi]

Dear All I have N73 (Chinese Make) All is Ok but on Messaging it eats up almost all battry power :( . . . HELP !!!

[zhanglei5556]

Dear All I have N73 (Chinese Make) All is Ok but on Messaging it eats up almost all battry power :( . . . HELP !!!
You should be software problems, try to repair the software may be able to help you resolve your problem.

[malikzulfi]

You should be software problems, try to repair the software may be able to help you resolve your problem.


I have a cable and com port driver installed . . . But how i can refresh my Mobiles software . . . I need a way to backup existing Software and load a new one . . . Any Help . ..

[zhanglei5556]

I have a cable and com port driver installed . . . But how i can refresh my Mobiles software . . . I need a way to backup existing Software and load a new one . . . Any Help . ..

Please phone chip CPU & FLASH models. We would like to have phone pictures. In order to help you.

[.::NaNTeC::.]

Please use MTK4. 10 ,Perhaps you will help solve the problem



can u show thats cearfully?????


i wait u

[.::NaNTeC::.]

Please use MTK4. 10 ,Perhaps you will help solve the problem
where i can find this version???????????

[zhanglei5556]

where i can find this version???????????
http://rapidshare.com/files/51534540/HUNGHA_MTK.4.1.rar here.good luck!

[nasirkhan007]

hello bro

how fined chinese mobile pinouts

help me plz

[.:: Sepid Gsm ::.]

i imagery Virtual COM Port with UFS but i want to format anycool D66 with mtk tools only tx LED on the UFS is on and no result !!
my used pinouts is :
anycool :
1: gnd
7: Phone Tx
9: Phone Rx

UFS :
2=gnd
4=TX
5=RX

which files (ROM,agent,scatter loading) to add in programs ? and which version of mtk tools ?

Plz Help Thx alot.

[zhanglei5556]

i imagery Virtual COM Port with UFS but i want to format anycool D66 with mtk tools only tx LED on the UFS is on and no result !!
my used pinouts is :
anycool :
1: gnd
7: Phone Tx
9: Phone Rx

UFS :
2=gnd
4=TX
5=RX

which files (ROM,agent,scatter loading) to add in programs ? and which version of mtk tools ?

Plz Help Thx alot.


Here are ANYCOOL D66 FILE
http://forum.gsmhosting.com/vbb/showthread.php?t=426253&page=4

[.::NaNTeC::.]

http://rapidshare.com/files/51534540/HUNGHA_MTK.4.1.rar here.good luck!
thanks man



i will tring and tell u what results


one Q: u say tring format by this version ??? or flash it ???


i wait ur answer

[zhanglei5556]

thanks man



i will tring and tell u what results


one Q: u say tring format by this version ??? or flash it ???


i wait ur answer
You can try one of the solutions.

[zhanglei5556]

M260/M100/M1000/M1200/M2000 unlock code #20050209# + send

[now_mobiles]

thank support zhanglei

[now_mobiles]

chines nokia N73 pinout flash cabile

[6205611]

Please send your problem here, I can help you to solve the question of software and hardware of Chinese phone

i hae a china mobile when i put any sim card he canot gie signal and restart automati without sim card good work

[zhanglei5556]

i hae a china mobile when i put any sim card he canot gie signal and restart automati without sim card good work
Please phone models, the chip, and pictures. Hope you can help

[zhanglei5556]

k838 MTK 6226 FLASH(M36LOT7050BO) DUAL SIM Card flie http://rapidshare.com/files/51762207/k838.rar

[*Diablo*]

k838 MTK 6226 FLASH(M36LOT7050BO) DUAL SIM Card flie http://rapidshare.com/files/51762207/k838.rar

This firmware have new crypt structure . can someone decrypt it ?
tools like mt622x decrypt cant correctly decrypt it

[gsmxpert]

can u giv me a link to download chinese flash file?

[gsmxpert]

tested working on w220

[zhanglei5556]

can u giv me a link to download chinese flash file?
Some time will be released,please wait!

[jignesh_1000]

is thir any free software to flash china mobiles

[psp_ps2_2005]

i need flash file for chinese phone named bluetooth....it has processor (mt6226) and flash chip
(128mb+32mb)[samsung]k5L2731CAM...i have flashed it with n83 flash file ,but the result was phone does not start up..therefore i need exactly the flash file for this phone plz....

thx in advance

[smartcare]

i have chine N95 ...phone good work without sim card..when i insert sim card phone is retart ...

[zhanglei5556]

i need flash file for chinese phone named bluetooth....it has processor (mt6226) and flash chip
(128mb+32mb)[samsung]k5L2731CAM...i have flashed it with n83 flash file ,but the result was phone does not start up..therefore i need exactly the flash file for this phone plz....

thx in advance
Please telephone release pictures here.

[zhanglei5556]

i have chine N95 ...phone good work without sim card..when i insert sim card phone is retart ...
Please telephone release pictures here!too

[feroz]

i need the hardware pictures for china mobile phones

[zhanglei5556]

i need the hardware pictures for china mobile phones
this is pic.
Perhaps you need drawings

[jignesh_1000]

any one pls send n77 flash files aand flasher of china n77

[jignesh_1000]

any one pls send n77 flash files and flasher of china n77

[zhanglei5556]

any one pls send n77 flash files and flasher of china n77
Please telephone release pictures here.

[psp_ps2_2005]

i need flash file for (mpeg4) konka d363....can i format or flash this phone by mtk tool????
i would like to tell you that this phone has nand flash with mtk processor.....

[jignesh_1000]

Please telephone release pictures here.

ok sir here i upload pic for n77

[zhanglei5556]

ok sir here i upload pic for n77
u need file is here .
Hope you can solve the problem, and Good Luck
.http://rapidshare.com/files/52427231/nokia_n77_6226BA_flash_127nb0_.rar

[zhanglei5556]

u need file is here .
Hope you can solve the problem, and Good Luck
.http://rapidshare.com/files/52427231/nokia_n77_6226BA_flash_127nb0_.rar
Telephone finished formatting needs

[zhanglei5556]

i need flash file for (mpeg4) konka d363....can i format or flash this phone by mtk tool????
i would like to tell you that this phone has nand flash with mtk processor.....
The telephones are two versions, one can not be solved, please try another.
pinouts: GND: 8 VCC:7 TX :6 RX:5
http://rapidshare.com/files/52430074/KAA363_2.03.207.rar

http://rapidshare.com/files/52432373/KAB363_2.03.129.rar

[jignesh_1000]

Telephone finished formatting needs

thanks can u pls upload pinout here aslo how to flash sir

[zhanglei5556]

thanks can u pls upload pinout here aslo how to flash sir
This requires your own efforts, I used the stuff chip programmer

[jignesh_1000]

software to flash sir

[mim_694]

how can i install the theme in china mobile # 6300 & where i can get the theme of china mobile

[zhanglei5556]

how can i install the theme in china mobile # 6300 & where i can get the theme of china mobile
the phones cann't install the theme .

[jignesh_1000]

sir can u pls explain proper which flasher will used to reflash mobile pls

[zhanglei5556]

sir can u pls explain proper which flasher will used to reflash mobile pls
You can file conversion to the use of the platform MTK file.

[jignesh_1000]

You can file conversion to the use of the platform MTK file.

not get can u pls upload mtk flash er pls don"t know any thing about flash china mobile pls

thanks for replay

[zhanglei5556]

not get can u pls upload mtk flash er pls don"t know any thing about flash china mobile pls

thanks for replay
Please download that want to help you!

[jignesh_1000]

sir can you pls upload here pin-out for n-77

[rye8989668]

Hi! It's a good thing that I've checked out this web site.. I have a P168 China clone phone that is working real fine for the first two months however, when I turned my bluetooth on last week..the phone kept on blinking just like the others on the forum.. all of the feature are working if I take of the sim off BUT aside from the bluetooth. Is there a possibilty for this phone to be fixed?? Thanks!

[zhanglei5556]

Hi! It's a good thing that I've checked out this web site.. I have a P168 China clone phone that is working real fine for the first two months however, when I turned my bluetooth on last week..the phone kept on blinking just like the others on the forum.. all of the feature are working if I take of the sim off BUT aside from the bluetooth. Is there a possibilty for this phone to be fixed?? Thanks!
First of all thank you for the support of this site, I think you should Bluetooth hardware problems!

[clayon]

nokia 8800 overheat when charging and not cheaping chargePlease send your problem here, I can help you to solve the question of software and hardware of Chinese phone

[amehdi]

hi dears i'm Amir Mehdi from iran and i teach superdoctor box for chinese mobile for more information contact me 0912 1381120
i have 40 gb flash file and more (set pin and flash 6228 with bootloader)

[zhanglei5556]

nokia 8800 overheat when charging and not cheaping charge
You is Nokia 8800, and if so, I think you should look at the UEM

[silverbert]

How can I open or unlock B Mobile U526?

[rye8989668]

First of all thank you for the support of this site, I think you should Bluetooth hardware problems!


so the bluetooth device on my phone has a problem? do you happen to know how to fix it? I tried having it repaired but nobody knows hw to fix it..what if I ask somene to reformat the flash drive?

[zhanglei5556]

so the bluetooth device on my phone has a problem? do you happen to know how to fix it? I tried having it repaired but nobody knows hw to fix it..what if I ask somene to reformat the flash drive?
Please release your chip names. CPU and FLASH

[jignesh_1000]

Please release your chip names. CPU and FLASH

sir y don"t you help me in this 2 mobiles pls sir want flash N77 and ktectch N8899 pls

[zhanglei5556]

sir y don"t you help me in this 2 mobiles pls sir want flash N77 and ktectch N8899 pls
Sorry, I have provided a flash tools and flash file to you. If it can not solve the problem, please use VE-PRO and the CPF-BOX solution.

[vpriya]

my china mobile nokia n95 shows insert sim card,pls help me.

[jignesh_1000]

Sorry, I have provided a flash tools and flash file to you. If it can not solve the problem, please use VE-PRO and the CPF-BOX solution.



sir give me pin-out for that mobile can flash pls

[psp_ps2_2005]

Sorry, I have provided a flash tools and flash file to you. If it can not solve the problem, please use VE-PRO and the CPF-BOX solution.

what is (VE-PRO and the CPF-BOX solution.)????????

[srtech]

VE-box,MTK-box,MTK-superdoctor,TIANMU-box is dont need pinout coz it can autumatic detection :)

[psp_ps2_2005]

The telephones are two versions, one can not be solved, please try another.
pinouts: GND: 8 VCC:7 TX :6 RX:5
http://rapidshare.com/files/52430074/KAA363_2.03.207.rar

http://rapidshare.com/files/52432373/KAB363_2.03.129.rar

sir zhanglei5556:mtk tool does not support this phone ...i can not flash this
phone with mtk-tool...what is the solution plz?????

[psp_ps2_2005]

VE-box,MTK-box,MTK-superdoctor,TIANMU-box is dont need pinout coz it can autumatic detection :)

how can i flash konka mpeg4 d363?????i hav mtk box ...but mtk-tool does not support this phone...thank you so much sir for yr quick reply

[zhanglei5556]

how can i flash konka mpeg4 d363?????i hav mtk box ...but mtk-tool does not support this phone...thank you so much sir for yr quick reply
If the telephone and computer can MTK-BOX communication, then you can use the high MTL TOOL version, solve your problem

[psp_ps2_2005]

If the telephone and computer can MTK-BOX communication, then you can use the high MTL TOOL version, solve your problem

mtk 4.1 could not detect the nand 64mb flash for this phone!!!!there is nothing to be done

[psp_ps2_2005]

i am using the same pinout that you gave me it:

5-rx
6-tx
9-vcc
10-gnd

[psp_ps2_2005]

i am using the same pinout that you gave me it:

5-rx
6-tx
9-vcc
10-gnd

sorry:
5-rx
6-tx
7vcc
8-gnd

[zhanglei5556]

sorry:
5-rx
6-tx
7vcc
8-gnd
Replacement of the other tools

[psp_ps2_2005]

ok my friend i have solved this problem by reheating its flash chip and reconnecting the phone
to the box and executing flash software process ..the result was phone works fine...i dont understand anything in chinese language,how to change language to other for this phone??

[zhanglei5556]

ok my friend i have solved this problem by reheating its flash chip and reconnecting the phone
to the box and executing flash software process ..the result was phone works fine...i dont understand anything in chinese language,how to change language to other for this phone??
Phones now OK? Language problems, I can not help you, I am sorry.:(

[jignesh_1000]

sir just give me pin-out for mobile pls

[zhanglei5556]

sir just give me pin-out for mobile pls
I use CPF-BOX, the box For MTK, SPREADTRUM, TI, ADI, Philips, AGERE, Infineon, SKY chip. Can arbitrary search and set up cable pinouts. Therefore, I do not know that this phone pinouts.

[psp_ps2_2005]

Phones now OK? Language problems, I can not help you, I am sorry.:(

sir zhanglei5556: give me link contains flash files for chinese phones

[zhanglei5556]

sir zhanglei5556: give me link contains flash files for chinese phones
Not yet, china phones flash file link. Wait

[trinhngoctrung]

my china mobile nokia n95 shows insert sim card,pls help me.

Check these ways, if not OK, change UEM(MT6305) and re-solder MT6226BA(CPU)

http://i125.photobucket.com/albums/p64/trinhtrung/Simway6219.gif

Goodluck!

[rye8989668]

Hi! the flash drive of my P168 china phone is Mediatek Flash Disk Usb Device with an external micro sd memory card..All I have is the usb cable. is it still possible for this phone to be fixed?? can you show give me a diagram so that I can show the technician on how to reactivate the bluetooth and detect the sim when I insert it? by the way, the technician told me that the phones parts are made of mp4 or old ipod player. have you ever seen this type of phone?

Thank you so much for helping me out!

[/ARIF/]

you tell me which box is best for china phone
1.
doctor box
2.mtk
3.atm
and you tell me how to format various china phone:)

[zhanglei5556]

you tell me which box is best for china phone
1.
doctor box
2.mtk
3.atm
and you tell me how to format various china phone:)


CPF-BOX
The box for MTK, SPREADTRUM, TI, ADI, Philips, AGERE, Infineon, SKY chip. Can arbitrary search and set up cable pinouts.

[zhanglei5556]

Hi! the flash drive of my P168 china phone is Mediatek Flash Disk Usb Device with an external micro sd memory card..All I have is the usb cable. is it still possible for this phone to be fixed?? can you show give me a diagram so that I can show the technician on how to reactivate the bluetooth and detect the sim when I insert it? by the way, the technician told me that the phones parts are made of mp4 or old ipod player. have you ever seen this type of phone?

Thank you so much for helping me out!
I think your question is the software to try to repair software. You may solve the problem。

[srtech]

CPF-BOX
The box for MTK, SPREADTRUM, TI, ADI, Philips, AGERE, Infineon, SKY chip. Can arbitrary search and set up cable pinouts.
can u post link for CFP-BOX?.i never khow about it :confused:

BR
SE

[zhanglei5556]

can u post link for CFP-BOX?.i never khow about it :confused:

BR
SE
In this box, September 16 began selling。

[srtech]

In this box, September 16 began selling。
now no more any info :eek::eek::eek:

BR
SE

[Faisal_Computer]

what about chinese mobiles restart Problem ?

i got two types of Problem

1 when signal comes mobile restart
2 when mobile want its restart any time in any state

any one have salution for this

and sory if this problem already discussed if already discussed then kindly give me link

Br

Faisal_Computer

[zhanglei5556]

what about chinese mobiles restart Problem ?

i got two types of Problem

1 when signal comes mobile restart
2 when mobile want its restart any time in any state

any one have salution for this

and sory if this problem already discussed if already discussed then kindly give me link

Br

Faisal_Computer
Your problem may be caused by PA, your chip it is RF3146 models?

[Faisal_Computer]

@ zhanglei5556

can you chat me on msn or yahoo or icq ?

Br

Faisal_computer

[宁国徽]

Chinese telephone is the best

[sowar]

hello sir i bought a N78 china made the pic is below are there any softwares or games for it if so where can i get them and how to transfer them in my mobile and what is this flash and MKT stuff http://img.diytrade.com/cdimg/412042/3772390/0/1181210015/Copy_N78_3_0_inch_super_large_QVGA_hand-wirting_screen_PDA_Mobile_Phone.jpg (javascript:viewImage('http://img.diytrade.com/cdimg/412042/3772390/0/1181210015/Copy_N78_3_0_inch_super_large_QVGA_hand-wirting_screen_PDA_Mobile_Phone.jpg');)

[zhanglei5556]

@ zhanglei5556

can you chat me on msn or yahoo or icq ?

Br

Faisal_computer
yes ,I have msn and icq. msn:fsxxkj@hotmail.com icq:421692402

[mobilejunc]

hi mates i have n95 i need factory reset code plz help

[REMO]

pls guide how to use mtk sdb atm box.

[mazhar_dha]

need pinout for this phone ........ plz help me :(

phone problem is with out sim phone ok but when i insert a sim then phone auto restart . now what can i do to solve this problem . formet FFs?:(

[sowar]

pls some1 help me with my Nokia N78 china made what flash software will it require

[samrat07]

need video convater for maximas mobile

[jermaineyork]

i have here n6300 china phone...
no power..
any software for this phone?

[Faisal_Computer]

NEED pinout for CECT i658

Br

Faisal_Computer

[mazhar_dha]

i have here n6300 china phone...
no power..
any software for this phone?

get infinity+ do ffs formet ur problem will solve

[Faisal_Computer]

NEED pinout for CECT i658

Br

Faisal_Computer

i got it :)

Br

Faisal_Computer

[hassanjinja1]

Infinity box has added most of the chinese phone , so now go for the INFINITY BOX , AND CABLE IS THERE

[asims]

hello sir
pls i need pin out for cect t590 pin 5x2 cpu sc 6600-rf 3166 and cect Q610 12pin cpu vt 3341 .thanks

[zhanglei5556]

hi mates i have n95 i need factory reset code plz help
Try,1122,1234,0000,00000000 good luck!

[zhanglei5556]

pls guide how to use mtk sdb atm box.
For MTK, SPREADTRUM, TI, ADI, Philips, AGERE, Infineon, SKY chip. Can arbitrary search and set up cable pinouts.
CPF-BOX Very simple

[zhanglei5556]

need pinout for this phone ........ plz help me :(

phone problem is with out sim phone ok but when i insert a sim then phone auto restart . now what can i do to solve this problem . formet FFs?:(
What is the telephone chips? If MTK, the proposed format. If remain the same. Please check PA.

[zhanglei5556]

pls some1 help me with my Nokia N78 china made what flash software will it require
Please release phone chips, pictures here. Thank you.

[zhanglei5556]

i got it :)

Br

Faisal_Computer
Sorry, my cable are BOX Can arbitrary search and set up cable pinouts. I must have the same phone can know pinouts. Understand?

[zhanglei5556]

hello sir
pls i need pin out for cect t590 pin 5x2 cpu sc 6600-rf 3166 and cect Q610 12pin cpu vt 3341 .thanks
Sorry, my cable are BOX Can arbitrary search and set up cable pinouts. I must have the same phone can know pinouts. Understand?

[rye8989668]

you can message me on ryanc011@yahoo.com

[icycue]

n96i dead wat will i do? (made in china)

[Dilip_Nath]

CECT V90 after formatting MTK Box, its now dead. What should I do ?

Please help.

[zhanglei5556]

CECT V90 after formatting MTK Box, its now dead. What should I do ?

Please help.
Only write full flash solve your problem.Please send phone pictures to here.
To help you find a flash file.

[nkrink]

Dear friend,
I Have a shinese mobile ZT6618 with tv and dual sim the name on the cover is Xingtai 338, i also have the cable connection but i neet the driver and the software to synchronize it with my computer.
please help me.
also where can i find softwares and games to install them on the phone?
thanks for your help

[zhanglei5556]

Dear friend,
I Have a shinese mobile ZT6618 with tv and dual sim the name on the cover is Xingtai 338, i also have the cable connection but i neet the driver and the software to synchronize it with my computer.
please help me.
also where can i find softwares and games to install them on the phone?
thanks for your help
Look at your question, that you are not a professional on the telephone repair workers, I think to your software, you will have more problems. Sorry, I only for professional personnel.

[Rafi]

Hi! what shoild i use to flash china N82 (6218) phone with?
can i have 2sim at the same time?

is any dealer to bay this phones chip ? to sweden?

Regard kim

[nkrink]

well i am new with chinese phone, and i just need some help to start.