All Chinese Miracle Mobiles 10000% Tested Pinouts here

[.::Munazzam::.]

Let's come and celebrate my BIRTHDAY with my tested pinouts of all chinese miracle mobiles.


...........ITS FREE GIFT FOR ALL THE GSM WORLD ON MY BIRTHDAY .........

And Yours prays and smiles are your gift for me.

These all pinouts are tested and working 100% i have tested all of them.

Note::: Just swap "Tx" and "Rx" if no detection. i did't post "Gnd" point bcoz its common in mobile mother board your can also get it from Negative Terminal of battery connector.
Make cables and post result here plz.


Br

Ch.Munazzam.

[muhammad irshad]

Let's come and celebrate my BIRTHDAY with my tested pinouts of all chinese miracle mobiles.


...........ITS FREE GIFT FOR ALL THE GSM WORLD ON MY BIRTHDAY .........

And Yours prays and smiles are your gift for me.

These all pinouts are tested and working 100% i have tested all of them.

Note::: Just swap "Tx" and "Rx" if no detection. i did't post "Gnd" point bcoz its common in mobile mother board your can also get it from Negative Terminal of battery connector.
Make cables and post result here plz.


Br

Ch.Munazzam.
ARE YOU KIDDIG US ON YOUR BIRTHDAY.IF YOU ARE RIGHT PICS AND PINOUTS THAN YOU SUBMET YOUR POST AGAIN.ENJOY YOUR BIRTHDAY AND BEST OF LUCK.

[SIXTUS]

where is the pinout?

Well happy birthday, i wish u more yrs ahead, best of luck.

[.::Munazzam::.]

i have already mentioned here just swap Tx and Rx coz of different box usage.
these all are standard pinouts and made for INFINITY BOX. OR UNI BOX.

here some text file also which have only Tx and Rx points for all my respected and helping members of this forum.

Dont forget to swap Tx and Rx if cable dont work..

Br
Munazzam.

[m rizwan sh]

..............Happy Birthday............

[bibi019]

happy birth day i wish you long and better happiness life
where the other phones cables
i wait more phone cable shematics
thanks in advance
bibi192004@yahoo.fr

[.::Munazzam::.]

Thanks for all respected members to whishing me my birthday.
Br

Munazzam.

[shahjee]

Many many Happy Return Of the Day,

Happy birthday ,,


good work , keep it up ,,

regards

Shahjee

[.::Munazzam::.]

Thanks..................................

[EGYGSM-TEAM]

thank you & happy brithday
br

[HAROON's]

good work brother




br
gsmcrazy1

[.::Munazzam::.]

Enjoy............................................. ...........

Ahan Enjoy..........................................

ya the first handset from mp4 which i flashed.(toooooo much difficult)

[chiragp]

@apna

1=need cect u8800 pinout

2=cosun

3=n95

thanks

[.::Munazzam::.]

Enjoy............................................

I WILL POST LATER REST OF ALL PINOUTS

[chiragp]

Enjoy.....................................

it has only 8 pin bro small conn

have a look

http://img233.imageshack.us/img233/4463/u8800kw4.jpg

[omairbutt786]

thanks for shairing man nice pin out but i should post the result after tested keep posting take care....

BR
Omairbutt786

[higherzman]

hello
please do u have pinouts for cect A666

thank's

BR

[shripalkawdia]

br can u post nokia 6288 pinout

[.::Munazzam::.]

My All Respected members.........very important to know for you that there are 50,000 (Fifty Thousand) different models of Chinese Miracle mobiles in market according to last survay.
I can only post those pinouts which are tested by me and i will be uploding all my tested pinout.

Thanks

Br
Munazzam.

[Kanwalgee]

Its realy helpfull if all members post here tested pinout by him.


@apna_mobile

Keep it up bro nice work.

[babyelephantt]

Good work done bro. But one question. Can you give me the pinouts for Sands P908 for infinity box. Or is there any cable that is compatible with this model?

Thanks in advance.

[.:ELSHORBAGY:.]

Great work ........... Thank you so much

[.::Munazzam::.]

Enjoy............................................. .....

[.::Munazzam::.]

Njoy.............................................. ....

[.::Munazzam::.]

njoy.............................................. .............

[.::Munazzam::.]

Njoy.............................................. ......

[.::Munazzam::.]

Dont forget to swap Tx and Rx keep it remember you may need to do this.

[cdma-india]

happy birthday friend , with ur post its clear that u repaired many china mobiles can u help me to get flash file for this model

http://www.comwise.com.hk/en/cp/d120.html

thanks

[.::Munazzam::.]

enjoy............................................. ..........

[.::Munazzam::.]

Njoy.............................................. ....................

[.::Munazzam::.]

Njoy.............................................. ......................................

[david laborator]

looking for cect s560 pinout


regards
David Gsm Laboratory!

[.::Munazzam::.]

Njoy.............................................. ............

[.::Munazzam::.]

The process is continue i m working on more phones and then i will post there pinouts dont go away i will b back.

Br
Munazzam.

[kaino147]

thanks alot apna_mobile. U're indeed a saviour, we've been looking for these for long now. U did what infinity couldn't do. Thanks a great deal

[Rajbhatitr]

Many many more happy returns of the day

[maplegsm]

greadt effort but why you did not show ground pinout no necessary

[ehsan_ilahi2001]

happy day wish u all the best thanks for sharing with us the pin outs of Chinese Miracle thanks once again

[.::Munazzam::.]

I have told all members many times that Gnd point is not hard to find just use common track on motherboar or use negative terminal of battery connector.
ITS VERY IMPORTANT TO USE Gnd PIN.

Br
Munazzam.

[chiragp]

@apna

what about mine pinout [cect u8800] as u gave is diff conn
http://www.gsmhosting.com/vbb/showpost.php?p=2604330&postcount=30


i have also post the jpg the conn which i have in phone [8 pin]

http://www.gsmhosting.com/vbb/showpost.php?p=2604475&postcount=38

[gsm_kingimran]

A.A.
ch.Munazzam " happy birthtday. i wish you long & better happiness life.f good work for chinese miracle & gsm hosting members

BR. Sh Imran

[.::Munazzam::.]

Bro i will give you working pinouts not fake there for plz wait i remember your task..


Br
Munazzam.





@apna

what about mine pinout [cect u8800] as u gave is diff conn
http://www.gsmhosting.com/vbb/showpost.php?p=2604330&postcount=30


i have also post the jpg the conn which i have in phone [8 pin]

http://www.gsmhosting.com/vbb/showpost.php?p=2604475&postcount=38

[.::Munazzam::.]

THANKS ALL MEMBERS FOR THIS APPRECIATION.



Br
Munazzam.

[adnanali]

HAPPY BIRTH DAY to you from all of us AdnanAli Zahoor Taemoor Umaer Khan Raheel Ahmed HAsan Furqan Ali Khan Kashif Khan

[.::Munazzam::.]

plz wait i m uploading all data in one folder.

[.::Munazzam::.]

Enjoy............................................. .........................

[gsm_kingimran]

i have " chinese " NOKIA N95 Slider + 1......8 connector. can you give me pinouts NOKIA N95 Slider + 1......8 connector.

Thanks in advance.
BR. sh imran

[.::Munazzam::.]

Enjoy............................................. ...........

[.::Munazzam::.]

Enjoy............................................. .....................

[NONA]

hi dear many many returns of the day nice work i m so glad u see the pin outs of chinese miracles keep it i m waiting for more pin outs other models

[.::Munazzam::.]

There is also another Nokia 6300 in market which have mini usb .. its Tx and Rx on PCB.


Thanks
Br
Munazzam.

[papoo]

There is also another Nokia 6300 in market which have mini usb .. its Tx and Rx on PCB.


Thanks
Br
Munazzam.

where is On Bord Pin Out.

[maplegsm]

i need chinese Nokia N79 pinout

[.::Munazzam::.]

There is clearly mentioned as Tx and Rx near sim tray.

Br
Munazzam.

[.::Munazzam::.]

If you want any pinouts then attach picture of mobile and jack.

Thanks
Munazzam.

[Yousaf Ali]

@apna_mobile can you post Suny Ericssun V200 pinout ? motorola V3 connector fit on it's socket .

thanks
Yousaf Ali

[ejazkhan9]

hi @ all
do sum1 have pinout for N77 ??

TIA

[HUMBLE]

Please I need software for these pinouts
thanks

[asims]

thanks for all pin out brother

[ahhongchai]

thanks very much bro
but bro can help me find for the chinese miracle flash file

[ahhongchai]

i have upload all the picture to one file


http://www.sendspace.com/file/8b7gfe

[.::Munazzam::.]

Thanks bro good work

Br
Munazzam.

[.::Munazzam::.]

but ready for more tested pinouts soon.

Br
Munazzam.

[jalam]

help me find for the chinese miracle flash file

[RarePearl]

Hi,

I urgently needed the pinouts of the Chinese sony ercsson w800i.
the connector is same as the orginal SE w800i. 12 pins.

thanks

[Yousaf Ali]

If you want any pinouts then attach picture of mobile and jack.

Thanks
Munazzam.
ok here it is. ZT588 and connector is same like chiness N95 slider.i hope this time you will help me out.

thanks
Yousaf Ali

[Yousaf Ali]

here is another one. N91i in black and silver color . D500 handsfree connector fits on it.the socket is on top of mobile.
Note. pinouts u posted for N91i is not compatible with this N91i.

thanks
Yousaf Ali

[Bappppy]

Enjoy............................................. .....................


I hav Nokia 6300 but 18 pin like samsung pins.I need pinout

[deepak2005]

Thanks brother nise work good job keep it up

wbr

Deepak

[ehsan_ilahi2001]

i need N66 pin outs please if u have then share with us

[.::Munazzam::.]

@MR.YOUSAF

I have tested pinouts for Zt 588 i will upload it after 2 hours.busy to making some new pinouts.

Br
Munazzam.

[aliakbar]

i have nokia n8888 which is dead i need pinout for it,it hac2*5 mini usb connector

[.::Munazzam::.]

Here very difficult and unique pinouts of
Sonyericsson V-700.
http://i196.photobucket.com/albums/aa20/munazzam_gsm/th_set.jpg (http://i196.photobucket.com/albums/aa20/munazzam_gsm/set.jpg) http://i196.photobucket.com/albums/aa20/munazzam_gsm/th_Magnified.jpg (http://i196.photobucket.com/albums/aa20/munazzam_gsm/Magnified.jpg)

[.::Munazzam::.]

@Mr.Ali i have posted v-180 pinouts just use them.

Br
Munazzam.

[mdshad1]

@MR.YOUSAF

I have tested pinouts for Zt 588 i will upload it after 2 hours.busy to making some new pinouts.

Br
Munazzam.

@Munazzam

bro i also need zt 588 pinouts. kindly post it soon :)

thanks

Mahmood
Lahore Pakistan.

[Santehnik]

.........................

[Santehnik]

ok here it is. ZT588 and connector is same like chiness N95 slider.i hope this time you will help me out.

thanks
Yousaf Ali

Hi just look at too SIM conector near it you will see 5 or 6 dots (You may not open a phone just conect it with wire).
1Rx 2Tx and last GND

and please I'm looking pinout for N95 it is not same with ZT588 pinout but same conector.

[.::Munazzam::.]

Dont wory i have tested them many times.i will upload tomorow.Just think your this job has done.

Br
Munazzam.

[Santehnik]

New 8800 or V666!
Hi sir I have some idia for with this pinots and can you do like thise shown on pic.
Beacause every body know china miracle phones is too many and pinout will change like mushroom after rain. I know you are working hard and big thanks. But when people looking for pinout with model name is too dificult to find, if you see phone on pic and connector you will find too easy.
Beacause on pic. shown new 8800 made in finland under eticate wroten V666.

I think every body understood me and sorry for my English.

****PS. I found this pinout and pic from Internet, I uploaded it for examle and I dont tested it!

[shahzad-0004]

Thanks bro nice work keep it up




shahzad

[mdshad1]

Hi just look at too SIM conector near it you will see 5 or 6 dots (You may not open a phone just conect it with wire).
1Rx 2Tx and last GND

and please I'm looking pinout for N95 it is not same with ZT588 pinout but same conector.

hello brother

have you tested this on ZT588 ?
i can see 6 dots it is near to sim tray but from left to right i should count or right to left :confused:

@apna_mobile

kindly post your working pinouts for ZT588 today i've one mobile for test so try to post it a.s.a.p

Bestregards

Mahmood
Lahore Pakistan.

[Yousaf Ali]

Hi just look at too SIM conector near it you will see 5 or 6 dots (You may not open a phone just conect it with wire).
1Rx 2Tx and last GND

and please I'm looking pinout for N95 it is not same with ZT588 pinout but same conector.
take a look on picture and tell me which one dots you are talking about.
as you can see there is 6 dots on top of golden border near to sim connector
while there is also 5 dots very near to sim connector on green pcb.can you please edit this picture in paint software and tell me exact location of rx,tx,gnd ?

thanks
Yousaf Ali

[tririval]

please help 6300 with 8 pin.....

thanks

[Santehnik]

hello brother

have you tested this on ZT588 ?
i can see 6 dots it is near to sim tray but from left to right i should count or right to left :confused:

Yes I tested it.
I think that if I don't mistake 5 is GND, 7Rx, 8Tx.
and if you realy see 6 golden dots under SIM jack.
just look at to pic

[Santehnik]

Need Pinout for PDA phone ZTC ZT999 with 2 camera. Connector is like Samsung A300 18 pin.

[Yousaf Ali]

Yes I tested it.
I think that if I don't mistake 5 is GND, 7Rx, 8Tx.
and if you realy see 6 golden dots under SIM jack.
just look at to pic

very confusion :confused: because the picture you have posted is totally different from original pcb ZT588. take a look the charging base is at bottom in your picture while in original pcb it is located on center left of pcb.why don't you take my picture and edit it in paintbrush software and show me the exact pinouts for ZT588. once again connector is same like samsung D820 original.in other wordings N95china slider connector fits on it.

thanks
Yousaf Ali

[ASHIF]

SalamoAlaikum Munazzam ur doing great job man........let me share my part in this....... CECT A706 Gnd= 1 Tx= 7 Rx=6

[Yousaf Ali]

@Munazzam
it is tomorow and i am still waiting for ZT588 correct pinouts.if you can not post so please tell me i will not waste the time here.

thanks
Yousaf Ali

[.::Zafar Communication::.]

hi

need sands p908 pinout urgently any body please


connector 2x6


waiting for


Zafar Janjua

[maplegsm]

munazzam bahi i need GPRS ilkone i800 pinout its problem is hang on startup

[rajiv007]

i want pinouts and flasher for chinese phone name is DVD

connector is same like v3

phone is dead, when i connect v3 usb cable pc ask for driver

i don't know what to do help me

[Yousaf Ali]

Dont wory i have tested them many times.i will upload tomorow.Just think your this job has done.

Br
Munazzam.

@Munazzam your tomorow is now past.now tell me clearly you have pinouts for ZT588 or you just playing with me :confused:

thanks
Yousaf Ali

[qayyoom1]

hi i need ok pinout of nokia 6300i and sony ericsson v700 copy sets plz post urgent

[visionmaster20]

i need pinouts for charging gm128
thank's

[aliakbar]

heloo dear fellow gsm memebers i am looking for zt588 pinouts it has 1*8 conector mu****m bhai u tell that yu have tested pinouts pls give me coreect pinouts

[haseeb71]

dear friend
ihave to need k288/ n18 nokia 12 pin conector pin out
replay me
mobilinkgsm1@hotmail.com
haseeb

[chmatlob]

very confusion :confused: because the picture you have posted is totally different from original pcb ZT588. take a look the charging base is at bottom in your picture while in original pcb it is located on center left of pcb.why don't you take my picture and edit it in paintbrush software and show me the exact pinouts for ZT588. once again connector is same like samsung D820 original.in other wordings N95china slider connector fits on it.

thanks
Yousaf Ali

Hi bro,
Just remove ur big light circle & speaker , under there u can see easily marked RX,TX & GND.

[chmatlob]

Please I need pinouts n95s-2sim
thanks

use V180 pinout, already posted in this thread..........

[gsm_wrold2007]

maximus or itel pin out needed pls help

[Santehnik]

For N95S look for attached file!

[max0510]

Please I need pinouts n95-2sim
connective has 18-pin as samsung.thanks

[~:Sujyot GSM Zone:~]

Hi i got a mobile named TV Y390 having restart problem but i dont have the pinout for this mobile to operate it with software

Here are some pics of the same:

[~:Sujyot GSM Zone:~]

No help yet???
Need it badly.

[.:Towhid:.]

Happy Bither Day.

I Need N95 (CECT V2), 1X12 (Small Pinout) Like Sam D800 cable, please Help

[~:Sujyot GSM Zone:~]

Still waiting "apna mobile" from your end as you can do this (this is what i think)

[gsm_wrold2007]

plz help me MAXIMUS OR ITEL pinout

[gsm_wrold2007]

plz help me MAXIMUS OR ITEL pinout

[RarePearl]

very confusion :confused: because the picture you have posted is totally different from original pcb ZT588. take a look the charging base is at bottom in your picture while in original pcb it is located on center left of pcb.why don't you take my picture and edit it in paintbrush software and show me the exact pinouts for ZT588. once again connector is same like samsung D820 original.in other wordings N95china slider connector fits on it.

thanks
Yousaf Ali

Hi,
I have same phone . Please can any one put the correct pinouts for this model ?

Thanks

[gsm3rdG]

need pinout zte f866 !
thanks

[lezwire]

N73 pinout please. this n73 is really like nokia n73. pinouts please?

[eribod]

the piout is not the pr but really is this software working tested by me N90 not connect

[Ramzan]

100% tested pinout for N87 phone
conector type 18 pin as Samsung phone conecror
key board top
[.................]
1 to 18
1,2 Gnd
7 Tx
9 Rx
br
CELL ZONE

[sahil2000ind]

Very Nice Collections Of Pinouts Keep It Up

Thanks

[saeed-gsm]

i need cecet e50
24 pin

[max0510]

thank you this pinout100% tested pinout for N87 phone
conector type 18 pin as Samsung phone conecror
key board top
[.................]
1 to 18
1,2 Gnd
7 Tx
9 Rx
works good n95-2sim

[ASHIF]

i want pinouts and flasher for chinese phone name is DVD

connector is same like v3

phone is dead, when i connect v3 usb cable pc ask for driver

i don't know what to do help me

Rx and Tx are written on pcb ............
if it is mt 6228 based phone infinity wont repair this phone .........wait for infinity future update

[ASHIF]

PINOUT FOR " MOTOROLLA L7+"
Gnd= 1
Rx= 11
Tx =12

Cable type is 1x18 like samsung cable

[zubairok]

Sir I need Cect V180 Pinout
thanks in advance

[sahil2000ind]

Sir I need Cect V180 Pinout
thanks in advance

HERE R THE PINOUTS

phone bottom connector_2x5_mini
_______________
/ 1 2 3 4 5 \
| 6 7 8 9 10 |
-----------------

Cect-v180

connector_2x5_mini

5: Gnd
9: Rx
10: Tx

4: Tx
5: Rx
6: Gnd

[saeed-gsm]

i need CECT e50 big pin out 24 pin

[SSH-GSM]

for repair all chines phone pls call me
i can help all people

saeed shahhoseini
iran-tehran

0098-21-66704429
0098-9121136018
shahhosani@yahoo.com

[damabib]

can u help sir?check ur pm

[lezwire]

i need pinout for n73, it looks like original n73. thanks.

[mr.Dubai]

Thanks for shareing,,,,,,,,,,,,,

[walky_tata]

can somebody plz give the pinout of N73

[gsm4iran]

plz help me for this sanos a203 chinees miracle it seems to same with d820 samsung 18 pin cable.
thanks for all ways for cable chinees miracle:confused:

[nasirkhan007]

hello bro

P908 pinouts

5:GND
3:TX OR RX
10:RX OR TX

[Santehnik]

Hi forum!
First sorry for my English!
An other ways, how to find Rx Tx signals.
It is tasted and also you can test it.
1 step is, we need to find GND from phone.
2 step is, we should power on phone (operation with dead phone: phone must be 100% dead by software) and take multimater put it to voltage.
3 multimeter (-) line put it GND and with (+) line check each connectors, and usually Tx= 1.8v or 2.8v and Rx=1.7v or 2.7v (it will be change by processor but strongly 1.7v or 2.8v not 3v or 4v)
This way is too easy and you will save a more time.
Last step is if you can’t find Rx and Tx signals just ask from FORUM people will help U.


IF YOU FOUND Tx Rx SIGNALS, JUST MAKE A PHOTO OF PHONE AND INCLUDE HERE IT WILL HELPFUL INFORMATION FOR US TO SAVE A TIME!

[Ramzan]

Its not a 100% slution for finding Tx, Rx, in every phone.because
every multimeter can't show 100% reading

But good idea for help

[Voice001]

Hi,


I have n95 (1X12 conector) phone showing restarting.anyone have tested pinout? i tried 1 pinout 1 gnd,6 tx,7rx but not work.ple help me.





thx
svk

[gsm4iran]

Nokia-N95 slider

keyboard top, connector_1x12_mini
1: Gnd
6: Tx
7: Rx

[Santehnik]

Its not a 100% slution for finding Tx, Rx, in every phone.because
every multimeter can't show 100% reading

But good idea for help

Hi!

I don't write that it 100% solution. (Just said an other ways, how to find Rx Tx signals.).
And for GSM phone repairing you should have original instruments, but not china miracle Instruments :) !!!!
And I'm using Multimetr named ALDA model AVD890G and then you can just test your multimeter by checking with good GSM Ac adaptor by voltage.
And this way is so easy to find it.

For example!
You have got new brand China miracle phone with USB cable. It has got 12 pin. You must find (Infinity team give good Idea 1.2.3 punkts):
1) GND usually it has got 2 GND. (now we have got 10 pins)
2) We will uncheck USB + and USB- (VSS) just with checking by USB cable (now we have 8 pins)
3) By USB cable we also uncheck V bat+, ac adaptor + polarization (now we have 7 pins)
4) Now from this 7 pins you will find 1 or 3 not used pins (last operation we have 3 or 6 pins to find Rx Tx signals)
5) Now at last operation you should use good multimeter just to find Rx Tx with 1.7v-2.7v or 1.8v-2.8v
6) WHEN PHONE IS POWERD OFF TX AND GND WITH MULTIMETER MAKING BEEEEEP (DIOD TEST OPERATION), WHEN PHONE POWERED ON IT WILL SHOW LIKE DIOD RESISTANS 600-700 OHM BETWIN TX AND GND.

I think I have give for every body more information’s. Just try to find. If you find 2-3 phone signals and you will be profi mobile Tx and Rx signals finder.
Some times you will not find with this method some phones, but why we have forum?

I'm not saying it is 100% solution but I'm saying it is TESTED solution.
I'll make some guide or FAQ by pic. if I have a free time!

This instruction will helpful for people who working in GSM repairing industry minimum 3-5 years.


*** OFFTOP. I have some friends who don't know what is it Tx and Rx signals, and why we using device. For siemens A35,C55 and C62 they using 3 kind of cable (because they thinking that for each brand we must use by one by cable).

SORRY FOR MY ENGLISH!

Good luck!

[Santehnik]

It is addition that above said!
You must feel and most important is instinct and the experience.
Tx and Rx signal is coming to connector like this (just look at to your Pinout collection). Usially 5-6, 5-7 or 11-13 11-12 not like 1-TX 13-Rx 5Tx 12 or 18Rx.
Just I said it is not INSTRUCTION (it is addition) Just look at YOUR PINOUT collections!

[Santehnik]

I made FAQ via pictures!
Just test it, and you will finish your post like Please help me with phone cable!
http://forum.gsmhosting.com/vbb/showthread.php?p=2648698#post2648698

[Yuris_revenge]

Nokia-N95 slider

keyboard top, connector_1x12_mini
1: Gnd
6: Tx
7: Rx

Test:
1 GND
6 Rx
7 Tx

or

1 GND
7 Tx
8 Rx

[mr.Dubai]

thanks for shareing......................
with crow.

[mr.Dubai]

thanks gsmhosting for new news......................

[Voice001]

Nokia-N95 slider

keyboard top, connector_1x12_mini
1: Gnd
6: Tx
7: Rx



thx for help,tested and work

[shoeb7]

volla this is great work done by you.
regards!

[mehta]

want pinouts for cect p9100.....................

[gsm4iran]

I Need Sanos A203 Pin Out 20pin Like D820 Samsung!!!!!!!!

[Mithu]

Thanks all of them thosh who sare & istructed

[gsm4iran]

I Neeeeeeeeed Sanos A203 20 Pin !!!!!!!!!!!!!

[nasirkhan007]

hello bro

help me bro Cect V008 pinouts

[Ramzan]

Sony Ericssom P999i Pinouts 1000000000% tested

conector type 8 pin like Triend T100

1 Gnd

3 Rx

4 Tx

Br

**********CELL ZONE**********
PAKISTAN

[taleb_nazari]

please help me china phone name

[Ramzan]

please help me china phone name

Explane it please

what's problum with u ?

[Ramzan]

Explane it please

What's problum with u ?

[supportbox]

hi
plz help me for pinout n79 chinamobile
send me pic

[supportbox]

plz send here pic pinout

model zt6618

[..::Sunil::..]

Good work bro...Keep it up....

[supportbox]

n79 rh-19 pinout

--------------------------------------------------------------------------------

hi
plz help me for pinout n79 chinamobile
send me pic

[ashok_kumar459]

need chinees n92 pinout with picture

[GSM SKILS]

hi members i have chines phone name s338 phone loked i need program
to unlock it pls help

[Voice001]

hi,
I need A666 pinout.






thx
svk

[Ramzan]

Dear Friendsi need Nokia 6300 Pin outs please
help me soon.
conector type same as orignal Nokia 6300 conector

5 pin just like mini usb conector

key board top
1 to 5
pin 1 Gnd

[FMC_GSM]

pls. i need w800 pin out...thank`s

[supportbox]

plz send here pic pinout

model

1. cect c1000

2. DB db6588

3. SGH-I788

[.:: Sepid Gsm ::.]

COM PORT RX,TX,GR pinouts ? for MTK-BOX ?

[Ramzan]

COM PORT RX,TX,GR pinouts ? for MTK-BOX ?



Please explane ;) u have MTK-BOX or just only software

[himanshu taldar]

hey, all for all china softwre problem repair than contact... 100% solution for all chinese miracle phones... 100% guaranteed
htaldar@gmail.com

[aliakbar]

i need zte 588 pinout urgently

[.:: Sepid Gsm ::.]

Please explane u have MTK-BOX or just only software
only software

i used UFS RJ-45 Port

[InfinitySupport]

Nokia-N95 slider

keyboard top, connector_1x12_mini
1: Gnd
6: Tx
7: Rx

Thanks a lot for information.

@all who use pinouts from Infinity-Box "cable selector":
if you post here pinouts that was found by Infinity-Box users it's no problem, but it will be very good if you will respect hard-working Infinity-Box users and send pinouts that you found by yourself to InfinityHelp@yahoo.com.hk so we can include it in Infinity-Box package and make life of hard-working Infinity-Box users little bit more easy.

Thank you for cooperation and understanding !

[InfinitySupport]

HERE R THE PINOUTS

phone bottom connector_2x5_mini
_______________
/ 1 2 3 4 5 \
| 6 7 8 9 10 |
-----------------

Cect-v180

connector_2x5_mini

5: Gnd
9: Rx
10: Tx

4: Tx
5: Rx
6: Gnd


Hello,

Please, read: http://www.gsmhosting.com/vbb/showpost.php?p=2672504&postcount=200

[Sapnis]

hi
i need pinouts for ZT6668 (2 sim cards PDA)
and
cect T689 (2 sim cards PDA)

[aliakbar]

today i succesfuly repaired one chinese set which was o3 it was written on the back ithink so its pinouts are on the pcb marked with rx tx and gnd coneect wires with it and enjoy 1000000% working

[nzeiga]

Hello
PLease need Pin out
Coolpad 288 Phone use same connector like Samsung 18 pin

[mehta]

need pinouts for cect n9 .........................

[Santehnik]

Please when you asking about pinouts, just includ a good phone photo with more inpformation.
Every body know that china miracle have difirent names for one models.
If you download here your phone photo, you WILL get FASTER answer!
1) Phone photo
2) Kind of connectors

Please do that!

[nobal1976]

i m looking chines n72i pinouts its conecter is same like motorola p2k 17 pin. like this (ooo oooooooooooooo)
and also mpeg4 A100 pinouts need CONNACTER IS SAME LIKE LG CHOKLATE '\1............12/' thanx in advance

[stivubicco]

pls i need pin out for this model any one that can help

[albert maren]

i need pinout for SANDS P908 Plzzzzzzzzzzzzzzzzzzzzzzz.

[himanshu taldar]

hey man lets take a look for china n79 .. this rhone has already given a pinout gnd, rx,tx near sim connecter

[Sapnis]

hi
i need pinouts for ZT6668 (2 sim cards PDA)
The Connector Type is same as that of Samsung Mobiles(18 Pins)

[jignesh_1000]

can u pls upload pin-out for n-77

[jignesh_1000]

aslo can you upload pin-out for ktectch n8899

flash files and flasher and format

[sudeeshveekey]

i need nokia n99i 1x12 pin out , any one have this?

[nobal1976]

i m looking chines n72i pinouts its conecter is same like motorola p2k 17 pin. like this (ooo oooooooooooooo)
and also mpeg4 A100 pinouts need CONNACTER IS SAME LIKE LG CHOKLATE '\1............12/' thanx in advance
i have find mpeg4 a100 pinouts pin1 gnd pin7 rx pin8 tx but not to find n72i pinouts
:confused:

[jignesh_1000]

aslo can you upload pin-out for ktectch n8899

flash files and flasher and format

can sum one upload here pin-out

[raffazila]

i need pinout for zt-p9200.urgent

[max0510]

Please I need pinouts n73 14 pin DKU-2 not wok. what's rj-45 pinouts please help

[GSM SKILS]

what about programs br

[systemworm]

Please give a correct hintel pinout for Cect P9100.It's connector is 2x5.
Thanks

[Satyam321]

thanks for sharing bro

[gsm4iran]

hi
i need pinouts for ZT6668 (2 sim cards PDA)
and
cect T689 (2 sim cards PDA)

here that your answer:

7 Rx
9 Tx
1,2 GND



cect t689
any cool d66
ztc 588
2gsm mpeg4

[gsm4iran]

hi
i need pinouts for ZT6668 (2 sim cards PDA)
The Connector Type is same as that of Samsung Mobiles(18 Pins)

It will help you bro
7 Rx
9 Tx
1,2 GND

[alirag]

plise la solition de formattege phone on or off

[jignesh_1000]

aslo can you upload pin-out for ktectch n8899

flash files and flasher and format



so pls upload here pin-out

[gsm4iran]

here is anycool d66 & other the same cables for repair&flash by infinity!


cect t689=anycool d66,2gsm nec mpeg4,.....

[GSM-FUTURE]

hi,

i want pinuts for pda a818 ...............................plz share


thx

[sajid ali sajid]

***** Aap Ko Apni Amaan Main Rakhay

[sajid ali sajid]

Hello Happy Birthday To U

[mehta]

hi
i need pinouts for ZT6668 (2 sim cards PDA)
The Connector Type is same as that of Samsung Mobiles(18 Pins)

here is pinout for zt 6668

[nasirkhan007]

hello bro

Cect- K328+6288 -PDA PinOut
1-------------8
1:Gnd
2:TX
3:RX

Nasirkhan_k2005@yahoo.com

[jignesh_1000]

then y don""t you all help to get pin-out for n-77 and kectech N8899

[asims]

hello sir
pls i need cect t590 pin 5x2 cpu sc 6600-rf 3166 and cect Q610 12pin cpu vt 3341 .thanks

[Santehnik]

Please I need pinouts n73 14 pin DKU-2 not wok. what's rj-45 pinouts please help

3-Rx
4-Tx
14-GND (last) If I don't forget also it is 8,9,11 pins are GND

[Faisal_Computer]

NEED pinout for CECT i658

with thanks

Br

Faisal_Computer

[Sapnis]

here that your answer:

7 Rx
9 Tx
1,2 GND



cect t689
any cool d66
ztc 588
2gsm mpeg4

many thanks, thank you very much; now i try to connect my phone

[Sapnis]

here is pinout for zt 6668
many thanks, thank you very much; now i try to connect my phone :)

[Sapnis]

here is anycool d66 & other the same cables for repair&flash by infinity!


cect t689=anycool d66,2gsm nec mpeg4,.....

many thanks, thank you very much; now i try to connect my phone

http://www.sapnis.id.lv/tinfo.jpg

[haseeb71]

Dear Friends Any Body Tell Me Pin Outs For W910i Sonyericsson China Made Mt6226 Processor
Or Unlock Phone Code
Urgently
Yhanks
Haseeb Aslam

[masterdevil]

here u can get all flash files for china mobiles

http://www.gsm4yemen.com/support/china-mobile/

thanks for share pin out


masterdevil

[Sapnis]

-here is pinout for zt 6668

Hi i connect my RJ45 infinity box cable by this points RX_A, TX_A, GND, Vpp but infinity box didn`t find my phone. =/

[lezwire]

SGH i788 pinouts please?

[harisha g h]

Plz Help Me To Find Chinese Samsung D820, Thanks In Advance.

[mehta]

Plz Help Me To Find Chinese Samsung D820, Thanks In Advance.

1: Gnd
7: Tx
8: Rx

[ayubalikhan]

i658 mpeg4 ceat pinout want

[max0510]

thanks mr. Infinity
How to find pinout for unknown model Here is instruction:
http://www.gsmhosting.com/vbb/showpost.php?p=2212036&postcount=7
pinouts n73 14 pin
3-tx 4-rx 8-gnd

[raffazila]

i need pinout for zt-p9200.urgent

no one to help me
it is 2*5 usb pin
i find vertical 5 points near the sim.
please help me.

[sairat]

Enjoy........................................




All is ok but whats about Rx and Tx Configurtaion on box side

[cgsm]

hai,
i think this will you help all.
thank u all.
http://forum.gsmhosting.com/vbb/showthread.php?p=2693074#post2693074

[eivoig]

Sands A203 pinouts I need thanks pls help

[chukky]

plz send here pic pinout

model

1. cect c1000

2. DB db6588

3. SGH-I788
Anycall SGH 1788 pi


6-GND
Tx-5
Rx-4

tested by me

[rajeshbahri]

i need pinout for modle sands a303i

w.b.r

[alirag]

pinout n78 china mobile 20 pin same conector samsung d800

[alirag]

plise help pinout n78 china mobile 20 pin

[Kashif Khan]

Nokia N88 chinies tested pinouts???
BR
Kashif Khan

[gsmcdmamas]

need cect t688+ pinouts urgent ........ with regards and thanks

[mazhar_dha]

hi i need china zt588 pinout plz help me it is 12 pin

[mazhar_dha]

still waiting for ZT588 correct pinouts plz any one help me

[gsm4iran]

hi i need china zt588 pinout plz help me it is 12 pin


hi bro here that zt588 12 pin :

GnD :12
RX:8
Tx:7

[mazhar_dha]

it's not woark. do u test it bro:

[sukhdeep]

sir i need CECT P9100 formatting code plz mhelp me

[InfinitySupport]

sir i need CECT P9100 formatting code plz mhelp me

You can see codes here: http://www.atm-box.com/index.php?id=utilities

[faysal]

hello guys 1st of all thanks for making such a nice thread i've been able to grasp some ov it would anyone of u b kind enough to tell me how to make this cable?? give me some link where i can learn how to make a cable ov these pinouts.....
Thanks in advance

TOm 313rD

[rehan hayder]

pls help pinout for db6588

[impeeza]

Hello, everybody, i just are so new in this world, i wonder the TX, RX, and GND connections are for the COM port of computer? thanks a lot.

[sallu]

plz post cect v400 pinoutssssssssssssssssssss.

[kasamiko]

Need pinout for CECT V668...this one seems not to work..

7 Rx
9 Tx
1,2 GND

BR

[eivoig]

what kind of specific model V668 theres too much CECT V668

[el gibborgsm]

pls i need n99i with 18 pins pinout.

[hitesh2000]

hi mates plese best way of flashing these sets:)

[veerpreet]

great work bro.thanks:)

[veerpreet]

great work bro.thanks :)

[kasamiko]

what kind of specific model V668 theres too much CECT V668

Well I thought saying CECT V668 is specific? Is there CECT V668a,b,c.d.e etc? that's all i can find at the back...I really HATE this chinese phones!!

[sukhdeep]

Hello Br Happy Birthday Wish U Live Long

Br I Need Pin Out For Cect P9100 If U Have Some Pl Post

[Ramzan]

10000000000% Tested pinout for CECT i658 12 pin

Key board top
{............}
1.........12

1. Gnd
5.Tx
6.Rx

BR
CELL ZONE

[sareeshbritco]

hai pls give the pinout of sandsA203(china) pleeeeeeeeas

[sareeshbritco]

:confused:hai pls give the pinout of sandsA203(china) pleeeeeeeeas

[asims]

hello sir
pls i need cect t590 pinout 5x2. Any body help me.thanks

[ayubalikhan]

a818 pinout want kindly give me

[ayubalikhan]

a818 pinout want kindly give me
1x8 conector pin 8 gnd
plese give me tx & rx pin out

[sherif2025]

thank you man 4 sharing

[Heather_88]

Does anyone has 都宝668 firmware, please....
if yes, please help me by send email the link to lily_k@hotpop.com

Thank u so much.

[elsokary]

plz any one help i need pin out for zt6618
i get that but i dont understand
ZT-6618
ZTC-ZT6618
Xingtai-338

connector_2x5_mini

10: Gnd
4: D-
6: D+
2: +5V

help any one give me work pin out

[cmshareef]

Test:
1 GND
6 Rx
7 Tx

or

1 GND
7 Tx
8 Rx


tested 100% working for N95 sliding

[Heather_88]

if anyone has firmware for M888 chinese Ipone, please let me know...
My email is lily_k@hotpop.com

Thank you so much.

[aukonline]

Need Pin Out Copy Nokia N73 Jak Just Lint Dk2 Cable Orignal N70