I need help to unlocking LG U8290 with FG [Archive]

provs

08-05-2007, 17:00

I try to unlock LG U8290 with FuriousGold...i flash phone with QFG module, i write NVM area, etc. I use 82XX module to change imei, but phone is stil locked. Were is "Direct unlock"?. I need a link with step by step explain. :confused:

GHOST_GSM

08-06-2007, 08:04

pls direct unlock it with LGQ.exe.

br

joy.

provs

08-06-2007, 17:20

pls direct unlock it with LGQ.exe.

br

joy.
Man, I'm blind or what? Were is "Direct unlock" in LGQ module???? Because my LGQ module(v1.0.0.406) don't have "Direct unlock", but having "Reset security and SPC" and "Imei change". Where I do wrong??? Pls help.

babyelephantt

08-06-2007, 17:37

Man, I'm blind or what? Were is "Direct unlock" in LGQ module???? Because my LGQ module(v1.0.0.406) don't have "Direct unlock", but having "Reset security and SPC" and "Imei change". Where I do wrong??? Pls help.

Power on phone
Connect usb cable to powered on phone
Make sure drivers are installed properly
Open the Qualcom module
Don't check Reset Security..... just
Do Job
Phone will be detected. Please wait... till done.

Good luck.

provs

08-06-2007, 19:05

Power on phone
Connect usb cable to powered on phone
Make sure drivers are installed properly
Open the Qualcom module
Don't check Reset Security..... just
Do Job
Phone will be detected. Please wait... till done.

Good luck.

Don't work man. In Qualcomm module not exists "Reset security" or "Do job", but only "User code" and "Unlock" and with this not work. :mad: Can you give me your Qualcomm.exe or other module who most work? Plss...

babyelephantt

08-06-2007, 19:10

Don't work man. In Qualcomm module not exists "Reset security" or "Do job", but only "User code" and "Unlock" and with this not work. :mad: Can you give me your Qualcomm.exe or other module who most work? Plss...

Check phone connectivity and make sure phone is well installed and detected by pc. If it is necessary for you to choose COM Manually do it. And press on unlock.

good luck again!

FuRiOuS_ShAdOw

08-07-2007, 11:37

TOO Old version used .
Update dongle , and download latest update. Just for info , you have to use QFG v1.0.0.2742 Retail.

provs

08-07-2007, 16:17

TOO Old version used .
Update dongle , and download latest update. Just for info , you have to use QFG v1.0.0.2742 Retail.
Brothers...I'm not crazy. The dongle is updated and i use QFG v1.0.0.2742 Retail, but not work. The QFG module tell me:

Searching phone ...
MODEL : U8290
COMPILED DATE : Oct 31 2005 15:06:00
RELEASE DATE : Oct 27 2005 18:00:00
FIRMWARE INFO : U8290-MODEM-V10b-OCT-27-2005-OPM-PTBAMBIH
IMEI : 00000000000000-0
BLUETOOTH ADDR : 00 12 56 A9 90 69
MEMORY ID : 0098:0076
MEMORY NAME : toshiba_ty90009c00sogg
MEMORY SIZE : 45MB
FUNCTION NOT AVAILABLE FOR THIS MODEL.
Time needed - 00:00:00

Any ideea?

FuRiOuS_ShAdOw

08-07-2007, 16:48

Well, Now Try flash phone. Also after flash u must WRITE NV, REPAIR IMAI, UNLOCK, and at end 277634#*# and do factory reset.
Br.

provs

08-07-2007, 18:16

Well, Now Try flash phone. Also after flash u must WRITE NV, REPAIR IMAI, UNLOCK, and at end 277634#*# and do factory reset.
Br.
I doit step by step from your instructions, but when i do REPAIR IMEI or DIRECT UNLOCK the QFG module show:
Searching phone ...
MODEL : U8290
COMPILED DATE : Oct 31 2005 15:06:00
RELEASE DATE : Oct 27 2005 18:00:00
FIRMWARE INFO : U8290-MODEM-V10b-OCT-27-2005-OPM-PTBAMBIH
IMEI : 35646100036922-7
BLUETOOTH ADDR : 00 12 56 A9 90 69
MEMORY ID : 0098:0076
MEMORY NAME : toshiba_ty90009c00sogg
MEMORY SIZE : 45MB
FUNCTION NOT SUPPORTED FOR THIS MODEL.
Error ... !
Time needed - 00:00:00.

and phone is still locked.

mamirza

08-07-2007, 19:36

Hi !

Pls read here ! (http://forum.gsmhosting.com/vbb/showthread.php?p=2270997#post2270997)

BR.

.:==di@bila==:.

08-07-2007, 23:28

I have the same problem mate. This phone had restart problem and afgter flash phone not locked then got locked phone after NVM write for network.

provs

08-08-2007, 16:07

Hi !

Pls read here ! (http://forum.gsmhosting.com/vbb/showthread.php?p=2270997#post2270997)

BR.
*** job man. It's 100% solution. it's very simple, but very "undercover".:D
thanks man. I own you a beer.:cool:

.:==di@bila==:.

08-10-2007, 16:33

@provs
This is not working for me brother, i tryed many times but still locked soft even saying function not availoable.

.:==di@bila==:.

08-10-2007, 16:33

@provs
This is not working for me brother, i tryed many times but still locked soft even saying function not availoable.

provs

08-10-2007, 18:08

@provs
This is not working for me brother, i tryed many times but still locked soft even saying function not availoable.
Try to full flash(find to support area) and write NVM with latest version a OFG module and USB cable, after this open LGQ module and press "Do Job". Work for me 100%.

.:==di@bila==:.

08-13-2007, 12:28

Try to full flash(find to support area) and write NVM with latest version a OFG module and USB cable, after this open LGQ module and press "Do Job". Work for me 100%.
Get me fine bro, I wrote NVM in this phone and found locked one. I flashed back and get unlocked phone but I must write NVM for full network.
I wrote back NVM and get locked phone,

.:==di@bila==:.

08-13-2007, 12:29

provs

08-13-2007, 13:32

Get me fine bro, I wrote NVM in this phone and found locked one. I flashed back and get unlocked phone but I must write NVM for full network.
I wrote back NVM and get locked phone and ofcourse I used lastest setup.
Now open LGQ module(LG 82xx series), not QFG module, unchecked "Reset security and SPC" and "Imei change" and now press "Do job". Good luck.

.:==di@bila==:.

08-13-2007, 15:21

Phone unlocked but no network, I wrote back NVM and still found locked phone. I unlocked back but still no network.

provs

08-15-2007, 16:04

Phone unlocked but no network, I wrote back NVM and still found locked phone. I unlocked back but still no network.
You write NVM from support area of Furious?

.:==di@bila==:.

08-15-2007, 16:48

You write NVM from support area of Furious?
yes, from furious support erea. Everything is ok now, I have full network.