E-pda N95

[Zein Zozza]

i have chinese N95 with 2 sim cards i need to flash it
its name is e-pda n95
the phone restart when i put sim card
so i need to flash it

my problem is to find the cable
the cable is 18 pin and i couldnt find it in the forum or infinity support area

can any body find it for me??

[Zein Zozza]

any one have a solution??
pls infinity team help me

i have the usb cable but it dont work for flash or unlock

the usb cable work only in read general info cause this jop work when phone open

the usb cable cant boot when the phone is close so i need to make rj cable

if i can do it by usb cable pls tell me and i will tell u the pin out for my usb cable to convert it to universal cable

[indian mobiles]

contact mobileservises@yahoo.com he will help u out he have all chinese cable pinouts

[Zein Zozza]

And how can i get the flash file??
we need some codes for chinese models like show sw version ,enter bootmode or factorey settings
r there anyone have some codes??

[jothi737]

hello zooza
dont worry
n95 pda 18pin
1,2 --ground
7----tx
9----rx connect infinity and press ffs formet work fine enjoy

[maruti]

ok sir i tray & post result bcoz i have same problem with this phone

[bijitech]

DEAR FRIEND,

i am waiting for ur result because i have a phone saim problem


wish u all thebest


best regards

[Zein Zozza]

hello zooza
dont worry
n95 pda 18pin
1,2 --ground
7----tx
9----rx connect infinity and press ffs formet work fine enjoy


Thanks sir your pinout work perfectly
now the phone work like th hourse :)

COM9 selected
Device: Autodetect
Checking data, wait...
advanced flash detection active
Action: reset
Boot...
Press and HOLD Power button now !
baud autodetection active
19200
Connecting, wait...
Initializing[6226:8A02:8A01]...
high speed disabled
boot step size: 0002
Release Power button now !
Boot Done
Initialize...
detecting chip #00 in region #00...
flash: EC257E25082501:29EA0000000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
number of flash chip/regions detected: 01/01
Initialize Done
Set baud...
slowest
Set baud Done
Check space...
device parameters autodetection in progress..
detecting chip #00 in region #00...
flash: EC257E25082501:29EA0000000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
number of flash chip/regions detected: 01/01
total flash region size: 01000000
detect device identification, method #1...
detection phase #1...
detect device parameters finished
structure: 2nd [enhanced] (or higher) generation
identification data Ok
identification data backup saved: id.7B331E4E.[E553_XZY1_E553_GPRS_MT6226_S01.01_1.BIN_6963C09B].rpl
identification detection finished
device-id: 7B331E4E
protocol ver: 04
ver. sw1: E553_XZY1_E553_GPRS_MT6226_S01.01_1.BIN
ver. sw2: E553_XZY1.01.1
ffs offset/size: 00800000/001FF000
detecting eeprom area in 1 chip(s)...
flash: EC257E25082501:29EA0000000000
checking area[00000000]: 00000000-00FFFFFF...
eeprom found near: 00E00000
detecting eeprom size...
eeprom size: 00200000
eeprom chip: 00
eeprom area detected[00000000]: 00E00000-00FFFFFF
reading [eeprom[E553_XZY1_E553_GPRS_MT6226_S01.01_1.BIN]]...
file saved: backup_eeprom[E553_XZY1_E553_GPRS_MT6226_S01.01_1.BIN]_20070820-004755.B0E.bin
flash: EC257E25082501:29EA0000000000
Check space Done
Manipulation...
Manipulation Done
Finalization...
Finalization Done
Write...
formatting...
flash: EC257E25082501:29EA0000000000
Write Done
file saved: backup_system_log_7B331E4E_E553_XZY1_E553_GPRS_MT6 226_S01.01_1.BIN_6963C09B_20070820-004812.B0X.bin
Finished, time used: 1272 sec
Remove/Install battery now !


thanks for all

[mazhar_dha]

i need pinout for Nokia chinese N95 pinout. plz help me:(

[mazhar_dha]

plz reply me & help me

[barhoomh]

1: grd
7:rx
9:tx
br

[InfinitySupport]

i need pinout for Nokia chinese N95 pinout. plz help me:(

Hello,

Please, use "Cable Selector": http://forum.gsmhosting.com/vbb/showthread.php?t=398297
if not helps, please read: C:\Program Files\InfinityBox\pinout\ChineseMiracle.txt
if not helps, please read: http://www.gsmhosting.com/vbb/showpost.php?p=2212036&postcount=7

[ajailal]

Hi Zein Zozza

i liked to buy the chinese N95, i saw my friend having one the name says E PDA, N95. but i dnt like the software part of if, can you let me know is there a way to flash with new software part, if so which one to use. thanks . and if you have the technical specifications of the phone, please let me know

[cmshareef]

i need pinout for Nokia chinese N95 pinout. plz help me:(


n95 slidig
pls try this

[rajtelecom]

plz help me for chaina N95 spk is not working
any solutions

[.::koolfriend4u::.]

hai frnd just change tht spkr wth samsung phone spkr..it 100%fit for china phones...& i succeed with tht.

good luck