Second and tested way to find Tx and Rx signal via pic! [Archive]

View Full Version : Second and tested way to find Tx and Rx signal via pic!

Santehnik

08-17-2007, 22:59

Hi forum!
I made guid (FAQ) how to find Rx Tx signals in china miracle phones.
It is 100% tested method by me and you should test it!
There is first discation!
http://forum.gsmhosting.com/vbb/showthread.php?t=426485&page=11

And now full solution by pictures!
***PS please after test this solution make this post Sticky: :)

Sorry for my English!

man_from_redsee

08-17-2007, 23:03

good work

thx alot

br
islam

Santehnik

08-18-2007, 01:04

Thanks for tahnks!
I forgot to say. This solution is working on Software damaged phones but not Hardware damaged phones.
And so how to know it is software or hardware damaged phone:
Connect it to GSM tester ac adaptor and power on it.
After power on, on ac adaptor it must have 20-40mA and it must stay in to one position (20-40mA), freez on start up or with sim card will restsrt and restart. It is software damaged phone!
If phone can't stay in one position, after power on 0-20 mA or 0-100mA it is hardware damaged phones!
Just with 300C rehot PCB CPU, RAM and power manager and this phones usully will power on and work fine.

Good luck and I'm going to sleep!
Tray and tray!

masterunlock

08-18-2007, 17:05

Realy good trick.

Thanks Mate !

B,r.

sahil2000ind

08-18-2007, 20:02

Thanks For The Trick

We Try And Post Result

Ramzan

08-18-2007, 22:49

Very very gr8 job.................Thx

shyacid

08-19-2007, 03:58

very usefule guide bro

tnx for sharig..........

Faisal_Computer

08-19-2007, 06:59

Good Work let me test and post you results

Br

Faisal_Computer

the_frightener

08-19-2007, 07:11

Kanwalgee

08-19-2007, 07:37

Thanks for share let me test then post result.

hassan tawrirti

08-19-2007, 12:42

in f3 both of tx & rx give 1.81v

saiftc2

08-21-2007, 00:27

Good work

i will try

GsmJoman

Tc

hassan1975

08-21-2007, 00:40

thx for u bro
we will test

OUSKHMANE

08-21-2007, 00:52

good work
i will try

Ramzan

08-21-2007, 06:54

I am still using this way to find ''Tx ' Rx'' but no results

Ramzan

08-24-2007, 15:24

Now its working for me in some models
not in every phone

armany99

08-26-2007, 17:08

thnx for share bro
good work

Santehnik

08-27-2007, 19:03

Hi forum!
I'll make new FAQ after some test, for why not working in some phone this solution, (but after some tests, and free time).
Now answer why in some phones, this solution is not working.
***Usually in Samsung connectors it is not working, because in this type of phones near of connectors has got glass IC and for that parameters will change (I’m working and I’ll make solution).
This solution working fine on connectors 1x8, 1x12, 2x5, 2x6 etc. and without glass IC near connectors.

Just found Tx RX signals for this phone named Nokia N95 (I think a new brand). This phone restart with SIM card.
1-0,35v
2-0,56v
3-2,84v
4-1,31v
5-0,00v
6-0,95v
7-3,55v
8-3,95v
9-2,84v – (Powered off-1,37v)-Tx
10-2,83v-(Powered off-1,36v)-Rx
11-0,03v
12-0,03v -GND

COM6 selected
Device: Autodetect
Checking data, wait...
advanced flash detection active
Action: reset
Boot...
Press and HOLD Power button now !
baud autodetection active
19200
Connecting, wait...
Initializing[6226:8A02:8A01]...
high speed disabled
boot step size: 0002
Release Power button now !
Boot Done
Initialize...
detecting chip #00 in region #00...
flash: 01227E22202200:2AEA0000000000
flash: Amd AMD/Fujitsu std [D 0004x010000 003Ex040000 0004x010000] 16Mb
number of flash chip/regions detected: 01/01
Initialize Done
Set baud...
921600
Set baud Done
Check space...
device parameters autodetection in progress..
detecting chip #00 in region #00...
flash: 01227E22202200:2AEA0000000000
flash: Amd AMD/Fujitsu std [D 0004x010000 003Ex040000 0004x010000] 16Mb
number of flash chip/regions detected: 01/01
total flash region size: 01000000
detect device identification, method #1...
detection phase #1...
detect device parameters finished
structure: 2nd [enhanced] (or higher) generation
New firmware detected: ATEN_6226_PCB01_GPRS_MT6226_S01.A66_V1_0SC.BIN
- make "Read detailed information, ask/rpl" operation
- send "backup_system_log_..." file to support
- make "Read Full Flash" operation
- send flash backup file(s) to support
- include in your e-mail full text from phone back label (phone name etc.)
identification data Ok
identification data backup saved: id.A83926E3.[ATEN_6226_PCB01_GPRS_MT6226_S01.A66_V1_0SC.BIN_13D 3374B].rpl
identification detection finished
device-id: A83926E3
protocol ver: 04
ver. sw1: ATEN_6226_PCB01_GPRS_MT6226_S01.A66_V1_0SC.BIN
ver. sw2: A66_V1.0SC
ffs offset/size: 00E00000/00200000
detecting eeprom area in 1 chip(s)...
flash: 01227E22202200:2AEA0000000000
checking area[00000000]: 00000000-00FFFFFF...
eeprom found near: 00E00000
detecting eeprom size...
eeprom size: 00200000
eeprom chip: 00
eeprom area detected[00000000]: 00E00000-00FFFFFF
reading [eeprom[ATEN_6226_PCB01_GPRS_MT6226_S01.A66_V1_0SC.BIN]]...
file saved: backup_eeprom[ATEN_6226_PCB01_GPRS_MT6226_S01.A66_V1_0SC.BIN]_20070827-150642.B0E.bin
flash: 01227E22202200:2AEA0000000000
Check space Done
Manipulation...
Manipulation Done
Finalization...
Finalization Done
Write...
formatting...
flash: 01227E22202200:2AEA0000000000
Write Done
file saved: backup_system_log_A83926E3_ATEN_6226_PCB01_GPRS_MT 6226_S01.A66_V1_0SC.BIN_13D3374B_20070827-150705.B0X.bin
Finished, time used: 165 sec
Remove/Install battery now !

.:==di@bila==:.

08-27-2007, 19:32

I have over 10 Chinese Phone that has Restart Problem with SIM, now glad to c pinout and try to find what had really gone wrong with these handset.

.::Munazzam::.

08-27-2007, 19:34

Hmmmm very usefull info thanks for sharing keep it up.very soon i m releasing new pinouts collection,work in progress.

Br
Munazzam.

Santehnik

08-27-2007, 23:36

Hi!
Some times people say that where can I take a connectors for making cable?
1)form ac adaptors
2)dead USB cables from phone, or dead phone cables
3)or some cables from device
4)etc
And it is possible by this way, It is alternative way to make a cable!

speedmen

08-28-2007, 17:54

good work bro
i'll try

Paki_PoWeRs

08-28-2007, 19:12

@ infinty team
as this is a sticky thread
plz delete thx posts even this suggetion of me
only suggestions should b in this thread

Br

naeem janjua

08-28-2007, 22:28

good work.thanks...............

nishaon

08-29-2007, 07:58

Thanks a lot. That's good idea to make cables

Santehnik

08-29-2007, 20:52

Hi forum!
Need data sheet for CPU MT62xx (6219,6226 etc). If it is possible please help me!

Masud-GSM

08-30-2007, 12:58

Good work.................
I'll try

Masud

muhned

09-04-2007, 20:51

how it connect with rj-45 or usb

want pinout for this

siang8788

09-06-2007, 12:32

nice work!!!!:)
thanks your infomation!!!

reaz.com

09-06-2007, 23:00

Dilip_Nath

09-09-2007, 08:30

Nice info brother, keep it up.

Dilip_Nath

09-09-2007, 08:48

Hi forum!
Need data sheet for CPU MT62xx (6219,6226 etc). If it is possible please help me!

I am also looking for data sheet that type phone. Thanks

habeebo

09-09-2007, 16:20

this method is very hard....................

samer8008

09-10-2007, 15:03

thanx man
good work

gsm_wrold2007

09-10-2007, 23:52

good job it's worksssssssssssssssssssss

venuskarthick

09-17-2007, 16:18

Santehnik

09-18-2007, 21:24

brother i tryed ur method it did not working see this link i need ur idea..
http://forum.gsmhosting.com/vbb/showthread.php?p=2720432#post2720432

First if I don't mistake it has standart pin by MTK.
4Tx
6GND
11Rx

10,4,11=pin show,s 2.2volt (in power off condetion 4&11th pin,s shows 0 volt only)
and by this way u found Tx Rx signals but u made some thing wrong!
Try it again and again, as I said more than 3-5 phones and this solution is working.

Second you shold see under label you will find TX RX signal dots.
If it is not working maybee problem is with hardware, becouse some times some phones is not connecting with 100% working cable with MTK-box, Infinity and Xintel is can't find pinouts. It is just hardware fault phone.

Third if you have realy problem with this phone, you should find phone with same CPU (on your situation MT6219) replace flash IC it in to the working phone and make just format.

at last just contact with me by MCN (now I've some problem with internet just add me to your contact I'll contact with you). I had halped to so meny people.

PS This solution is working only on MT62xx CPU.

Santehnik

09-18-2007, 21:34

this method is very hard....................

on working phone it take about 5-10 min.
Can you give us, so easy way? It will be so good thing.

PS. Working and making money I think it is not so easy.

shahzad-0004

09-19-2007, 00:45

Thanks man nice work

shahzad;)

Vansy

09-20-2007, 11:32

My way almost the same.
1) find ground
2) put tx pin1( no with ground 0ne) and Tx pin2 ( no with ground 0ne)
3) run Infinity Chinese Miracle software and press read full flash
4) try to power on detect phone if no try to remove tx or rx from 1 to 2, to 3 untill software detect phone.
Here log I tried make cable for CECT E818 :
COM1 [VCP0] selected
Device: Autodetect 6205-6227,6228 NOR
Checking data, wait...
advanced flash detection active
Action: read NOR flash
Boot...
Press and HOLD Power button now !
baud autodetection active
19200
Connecting, wait...
Initializing[6226:8A02:8A01]...
high speed disabled
boot step size: 0002
Release Power button now !
Boot Done
Initialize...
detecting chip #00 in region #00...
flash: 98004900000002:29EA0000000000
flash: Toshiba AMD/Fujitsu std [T 0008x002000 00FFx010000] 16Mb
number of flash chip/regions detected: 01/01
Initialize Done
Set baud...
115200
Set baud Done
Identification...
device parameters autodetection in progress..
detecting chip #00 in region #00...
flash: 98004900000002:29EA0000000000
flash: Toshiba AMD/Fujitsu std [T 0008x002000 00FFx010000] 16Mb
number of flash chip/regions detected: 01/01
total flash region size: 01000000
detect device identification, method #1...
detection phase #1...
detect device parameters finished
structure: 2nd [enhanced] (or higher) generation
identification data Ok
identification data backup saved: id.73629E5E.[KINGER_6226_PCB01_GPRS_MT6226_S01.GA09_V06_12_03_1 _4.BIN_DBCCFB91].rpl
New firmware detected: KINGER_6226_PCB01_GPRS_MT6226_S01.GA09_V06_12_03_1 _4.BIN
- make "Read detailed information, ask/rpl" operation
- send "backup_system_log_..." file to support
- make "Read full flash" operation
- send flash backup file(s) to support
- include in your e-mail full text from phone back label (phone name etc.)
identification detection finished
device-id: 73629E5E
protocol ver: 04
ver. sw1: KINGER_6226_PCB01_GPRS_MT6226_S01.GA09_V06_12_03_1 _4.BIN
ver. sw2: GA09.V06.12.03.1.4
ffs offset/size: 00E00000/00200000
detecting eeprom area in 1 chip(s)...
flash: 98004900000002:29EA0000000000
checking area[00000000]: 00000000-00FFFFFF...
eeprom found near: 00E00000
detecting eeprom size...
eeprom size: 00200000
eeprom chip: 00
eeprom area: 00000000:00E00000-00FFFFFF
reading [flash[KINGER_6226_PCB01_GPRS_MT6226_S01.GA09_V06_12_03_1 _4.BIN]]... STILL READING..

sunny_cool

09-20-2007, 14:31

can anyone please put the first pic again as unable to download that pic properly

venuskarthick

09-20-2007, 17:12

First if I don't mistake it has standart pin by MTK.
4Tx
6GND
11Rx

and by this way u found Tx Rx signals but u made some thing wrong!
Try it again and again, as I said more than 3-5 phones and this solution is working.

Second you shold see under label you will find TX RX signal dots.
If it is not working maybee problem is with hardware, becouse some times some phones is not connecting with 100% working cable with MTK-box, Infinity and Xintel is can't find pinouts. It is just hardware fault phone.

Third if you have realy problem with this phone, you should find phone with same CPU (on your situation MT6219) replace flash IC it in to the working phone and make just format.

at last just contact with me by MCN (now I've some problem with internet just add me to your contact I'll contact with you). I had halped to so meny people.

PS This solution is working only on MT62xx CPU.

THANKS REALY GOOD INFO
bro now i got the rx tx pin
last time i made some mistak,s now am clear see this i need ur help on this also
http://forum.gsmhosting.com/vbb/showthread.php?t=445213

& another mobile also i solved by ur method
http://forum.gsmhosting.com/vbb/showthread.php?t=445201

thanks lot

evil-extinction

09-21-2007, 10:44

should be tested but if its true ....

sharmin

09-23-2007, 06:08

sunny_cool

09-24-2007, 08:53

Yes put the link again always getting corrupt file..

thanks in advance

Santehnik

09-25-2007, 18:36

Yes put the link again always getting corrupt file..

thanks in advance

Just I tested it, it is not corrupted

sunny_cool

09-26-2007, 13:26

Can you put link again...might be problem is at my end...need that file

Edwins c

09-26-2007, 17:14

if you have downloaded the New chinese miracle that is inside the update so dont border people to post the picture unless u dont have support for Infinity

sharmin

09-26-2007, 22:25

Just I tested it, it is not corrupted
pls post it again ... that link giving error all time :confused:

Santehnik

09-28-2007, 20:27

OK!
Just uploaded this file on rapidshare
http://rapidshare.com/files/58906519/Instruction_how_to_find_pinout.rar.html

mansi

09-30-2007, 22:23

just tested the method and proofed to be effective 100%
found the pinouts in less than 15 minutes (including the soldering) :)

thanks alot

Best Regards
Mansi

GSM Electronic

10-04-2007, 00:10

Pinout NOKIA_NOKLA_NEC
N95_N618...
http://www.tinypic.ir/files/27k1ox2069hp8gsz02yd.jpg (http://www.tinypic.ir/)

sivaaaaa

10-05-2007, 10:59

sir n70 white screen problem pls help me

alidoran

10-09-2007, 18:47

nice work but most test and if ok is best work :D

sonetek

10-13-2007, 21:05

in your explanation about second method of locating rx and tx, it shows that rx and tx does not neccessarily need to close together is that right?

alidoran

10-17-2007, 10:39

this method is working and very good method but littel hard method:D

sivaaaaa

10-24-2007, 14:16

Good evening sir,thank you very much

alswedi

10-27-2007, 19:19

Very Good Work , Thank You

Shimada

11-03-2007, 19:26

hi

what's about ZT68 (click here for pic (http://evermag.en.alibaba.com/product/50405442/51921343/Dual_sim_china_mobile_phone/Dual_sim_ZT68_Mobile_Phone.html))

they have 4 pins with 2.8v, 2 of them beep when phone is powered on

i try all combination but now result

any one have already his pinouts (ZT68)

18 pins, pin 1 & 2 are GND

thx in advance

:)

Shimada

11-03-2007, 20:10

all is ok now

Hardware version: MT6226, E02
Hardware version: M500Z_05C_HW
Software version: E550_Y2VIRUARFRBT.01
Software date: 2005.04.12
Barcode: GTL06020721002930
imei: 352409xxxxxxxxxxx
Finished, time used: 5 sec
Power off phone now !

:)

quickgsm

11-27-2007, 18:05

thanks for good work keep it up

salim786

12-06-2007, 15:04

Thanks For The Trick

We Try And Post Result:)

sege

01-10-2008, 09:24

Good Work Infinity Team.Good Work Infinity Team.

TALIAT

02-04-2008, 23:44

i need pin outs for

mpeg 4 1*12pin

nokia 6300y 2*5pin

sony erricson p910i 2*6pin

n95 2*5pin

A380 2sims 2*8pins

kj79

03-03-2008, 16:37

Realy good trick
thaaaaaaanx man

mazentel..

09-07-2008, 18:35

good work bro.......................................

shahid555

10-18-2008, 21:03

thanx sir ur great work i hv found these pinouts. i like ur job thanxxxxxxxx

jaburnok

10-19-2008, 04:49

its been posted years ago............ but anyway tnx

nasermmx

10-19-2008, 23:20

thanks....................

Qaisar Mahmood

10-20-2008, 18:07

Thanks...................................

gvc82

01-23-2009, 10:57

i need pinout for jincen jc730
http://img.diytrade.com/cdimg/626539/6761379/1/1219973916/Quad_Band_Dual_SIM_TV_Mobile_VS-JC730_730S.jpg

gsmxpert

01-23-2009, 11:47

waoooooo is nice, thanks bro.................

InfinityHelp

01-23-2009, 20:30

i need pinout for jincen jc730
http://img.diytrade.com/cdimg/626539/6761379/1/1219973916/Quad_Band_Dual_SIM_TV_Mobile_VS-JC730_730S.jpg

hello!

lets start from checking what CPU it is based.
you either can do this by disassembling phone or by typing *#0044# and pressing green (send) button.
if you will see "language set: english"- you can be sure, that this phone is supported by Infintiy software

gvc82

01-24-2009, 13:23

hello!

lets start from checking what CPU it is based.
you either can do this by disassembling phone or by typing *#0044# and pressing green (send) button.
if you will see "language set: english"- you can be sure, that this phone is supported by Infintiy software

Hi the phone is supported by infinity software i can work with at comands using the usb cable wit infinity but can't use advanced functions. i need the socket is a mini USB the procesor mtk 6225

pathfinder333

01-24-2009, 13:31

very nice job bro.............

keep on sharing...................

InfinityHelp

01-24-2009, 22:04

Hi the phone is supported by infinity software i can work with at comands using the usb cable wit infinity but can't use advanced functions. i need the socket is a mini USB the procesor mtk 6225

hello!

so, find com port pinout and assemble service cable
then you can use advanced functions

gvc82

01-25-2009, 23:32

Hi offcorse i need the pinout that is the problem. even opening the phone i cant find it. Note:i already finded some pinouts of other phones im not new in this.

InfinityHelp

01-26-2009, 20:58

hello!

have you tested connector pins with multimeter? what voltages there?

danyalmeshal

06-17-2009, 14:24

Hi,
I have a N78 Chinese Phone which powers off with sim. can any body help me by posting N78 Restart Solution and Pinouts pls.Pins are 2x5 plz post TX and RX points
Adampur Hawks

danyalmeshal

06-17-2009, 14:31

Hi,
I have a N78 Chinese Phone which powers off with sim. can any body help me by posting N78 Restart Solution and Pinouts pls.Pins are 2x5 plz post TX and RX points moileplusphone@yahoo.com send me solution

InfinityHelp

06-17-2009, 23:09

Hi,
I have a N78 Chinese Phone which powers off with sim. can any body help me by posting N78 Restart Solution and Pinouts pls.Pins are 2x5 plz post TX and RX points
Adampur Hawks

hello!

are you infinity box user? i can teach you how to solve this problem using Infinity box

waseem2400

06-29-2009, 13:40

thanks to alllllllllllllllllllllllllllllllllllllllllll

InfinitySupport

07-01-2009, 22:56

thanks to alllllllllllllllllllllllllllllllllllllllllll

hello,

It's really important thread, please, let's post here only important technical information.

delchoni

07-28-2009, 20:57

nice work good metod to detection pinout

diarmod

08-01-2009, 15:17

Goodmorning every bady. I want to now if ZTC c800+ is support in INFINITY Box.Thanks...

InfinityHelp

08-02-2009, 00:58

Goodmorning every bady. I want to now if ZTC c800+ is support in INFINITY Box.Thanks...

Hello!
you can check this by typing *#0044# and pressing green (send) button.
if you will see "language set: english"- you can be sure, that this phone is supported by Infintiy software