View Full Version : N888 Pinouts needed
.::KHURRAM::.
08-18-2007, 12:19
N888 outside and +838 inside ,pinouts needed
N888 outside and +838 inside ,pinouts needed
BRO POST CONECTOR TYPE —ＡＬＳＯ ＰＯＳＴ ＧＤＮ ，ＶＣＣ ＰＩＮ
ＰＩＮ ＣＯＵＮＴ ＳＴＡＮＤＥＲＥＤ ＳＴＹＬＥ
ＴＨＸ
.::KHURRAM::.
08-18-2007, 17:21
COM2 selected
Device: Autodetect
Checking data, wait...
advanced flash detection active
Action: reset
Boot...
Press and HOLD Power button now !
baud autodetection active
19200
Connecting, wait...
Initializing[6226:8A02:8A01]...
high speed disabled
boot step size: 0002
Release Power button now !
Boot Done
Initialize...
detecting chip #00 in region #00...
flash: 01227E22202200:29EA0000000000
flash: Amd AMD/Fujitsu std [D 0004x010000 003Ex040000 0004x010000] 16Mb
number of flash chip/regions detected: 01/01
Initialize Done
Set baud...
slowest
Set baud Done
Check space...
device parameters autodetection in progress..
detecting chip #00 in region #00...
flash: 01227E22202200:29EA0000000000
flash: Amd AMD/Fujitsu std [D 0004x010000 003Ex040000 0004x010000] 16Mb
number of flash chip/regions detected: 01/01
total flash region size: 01000000
detect device identification, method #1...
detection phase #1...
detect device parameters finished
structure: 2nd [enhanced] (or higher) generation
identification data Ok
identification data backup saved: id.3B0A1EDA.[SZMI26_05C_PCB01_GPRS_MT6226_S01.MTK6226_CL668_V1_ 0.BIN_957F51FF].rpl
identification detection finished
device-id: 3B0A1EDA
protocol ver: 04
ver. sw1: SZMI26_05C_PCB01_GPRS_MT6226_S01.MTK6226_CL668_V1_ 0.BIN
ver. sw2: MTK6226_CL668_V1.0
ffs offset/size: 00E00000/00200000
detecting eeprom area in 1 chip(s)...
flash: 01227E22202200:29EA0000000000
checking area[00000000]: 00000000-00FFFFFF...
eeprom found near: 00E00000
detecting eeprom size...
eeprom size: 00200000
eeprom chip: 00
eeprom area detected[00000000]: 00E00000-00FFFFFF
reading [eeprom[SZMI26_05C_PCB01_GPRS_MT6226_S01.MTK6226_CL668_V1_ 0.BIN]]...
file saved: backup_eeprom[SZMI26_05C_PCB01_GPRS_MT6226_S01.MTK6226_CL668_V1_ 0.BIN]_20070818-172957.B0E.bin
flash: 01227E22202200:29EA0000000000
Check space Done
Manipulation...
Manipulation Done
Finalization...
Finalization Done
Write...
formatting...
flash: 01227E22202200:29EA0000000000
Write Done
file saved: backup_system_log_3B0A1EDA_SZMI26_05C_PCB01_GPRS_M T6226_S01.MTK6226_CL668_V1_0.BIN_957F51FF_20070818-173016.B0X.bin
Finished, time used: 1201 sec
Remove/Install battery now !
InfinitySupport
08-18-2007, 22:48
@.::KHURRAM::.
please, post here connector and pinout details. Thanks !