utada-hikaru
08-22-2007, 04:29
Infinity 1.42 Chinese Miracle
N97i This Phone is User code change
I try to use N95(T98) Pin out (because It's connector 2*6 mini same)
1. TX
2. RX
6. GND
5. connect to pin 12
12. connect to pin 5
It's True ???
Please show me Pin out for N97i:confused:
Thank's
Infinity The best:)
Infinity-Box
08-22-2007, 11:15
to find pinout for a chinese phone
First you must find Gnd .. detailed description to find this can be found here
http://forum.gsmhosting.com/vbb/showthread.php?t=433447
After u find gnd follow the steps below
How to find pinout for unknown model:
In most cases you need to know Gnd, Rx, Tx pins for flash/unlock operations. What do do if you don't have cable or you have new phone model:
1. find Gnd pin (it's required step, you can't continue until you will know Gnd pin location)
2. find Charge pins (it's optional step, just to save your time during future research)
3. find +Battery pins (it's optional step, just to save your time during future research)
4. connect cable Gnd to phone Gnd
5. try to connect cable Rx/Tx wires to all phone contacts one by one (except Gnd, Charge, +Battery pins) and try to read flash from phone
6. if flash read procedure can start this means that pinout found Ok and you can make other operations
Note about "Chinese models": a lot of different phones with the same name exist on market (as well as many different name phones with the same pinouts), so, if you see in our "cable selector" wrong pinout for "Chinese models"it's good idea to find correct pinout acording to above instruction and send found pinout information with full text from phone back label to InfinityHelp@yahoo.com.hk