n95 SUCCESSFULLY BY INFINITY

[.::KHURRAM::.]

COM2 [Serial1] selected
Device: Autodetect
Checking data, wait...
advanced flash detection active
Action: user code
unlock method: standard
Boot...
Press and HOLD Power button now !
baud autodetection active
19200
Connecting, wait...
Initializing[6226:8A02:8A01]...
high speed disabled
boot step size: 0002
Release Power button now !
Boot Done
Initialize...
detecting chip #00 in region #00...
flash: 01227E22202200:29EA0000000000
flash: Amd AMD/Fujitsu std [D 0004x010000 003Ex040000 0004x010000] 16Mb
number of flash chip/regions detected: 01/01
Initialize Done
Set baud...
slowest
Set baud Done
Check space...
device parameters autodetection in progress..
detecting chip #00 in region #00...
flash: 01227E22202200:29EA0000000000
flash: Amd AMD/Fujitsu std [D 0004x010000 003Ex040000 0004x010000] 16Mb
number of flash chip/regions detected: 01/01
total flash region size: 01000000
detect device identification, method #1...
detection phase #1...
detect device parameters finished
structure: 2nd [enhanced] (or higher) generation
identification data Ok
identification data backup saved: id.E6D0C977.[BR26_05C_PCB01_GPRS_MT6226_S01.BR26_05_27.BIN_6855 C977].rpl
identification detection finished
device-id: E6D0C977
protocol ver: 04
ver. sw1: BR26_05C_PCB01_GPRS_MT6226_S01.BR26_05_27.BIN
ver. sw2: BR26_05.27
ffs offset/size: 00E00000/00200000
detecting eeprom area in 1 chip(s)...
flash: 01227E22202200:29EA0000000000
checking area[00000000]: 00000000-00FFFFFF...
eeprom found near: 00E00000
detecting eeprom size...
eeprom size: 00200000
eeprom chip: 00
eeprom area detected[00000000]: 00E00000-00FFFFFF
detecting structure pass 1...
...............
detect standard location pass #1...
.................................................. ......
detect extended location pass #1...
.................................................. ..
detect standard offset pass #1...
detect standard data...
layout detection complete
eeprom element #1 detected ok
reading [eeprom[BR26_05C_PCB01_GPRS_MT6226_S01.BR26_05_27.BIN]]...
file saved: backup_eeprom[BR26_05C_PCB01_GPRS_MT6226_S01.BR26_05_27.BIN]_20070823-221412.B0E.bin
flash: 01227E22202200:29EA0000000000
Check space Done
Manipulation...
detection procedure, wait...
detection procedure completed
Manipulation Done
Finalization...
Finalization Done
Write...
flash: 01227E22202200:29EA0000000000
Write: eeprom
Write Done
file saved: backup_system_log_E6D0C977_BR26_05C_PCB01_GPRS_MT6 226_S01.BR26_05_27.BIN_6855C977_20070823-222459.B0X.bin
Finished, time used: 1850 sec
Remove/Install battery now !
GND=6
RX=5
TX=4

[InfinityHelp]

hello!

yes, this pinout for connector_2x5_mini is available in our pinout collection.
thank you for your report!

[damabib]

Verry Useful Thx Bro 4 Confirmed

[treo29]

good good good good...........................

i am happy

[RED PHOENIX]

yah you have a good effort,,thank you mate

[.::KHURRAM::.]

I Did User Lock Decode.it Alos Take The Same Time As Format Ffs.so Keep In Mind Before Commiting With Customer.and Charge According To Time.

[doller]

ohh this is china n95 i think nokia n95

[Kashif Khan]

Its old story,Infinity is best.
BR
Kashif Khan

[Kashif Khan]

Oh sorry for my double post.
BR

[femi adeniyi]

thanks infinity team.

[amir&melika]

pinout ?
thx dear freind

[InfinitySupport]

pinout ?
thx dear freind

Hello,

Please, use "Cable Selector": http://forum.gsmhosting.com/vbb/showthread.php?t=398297
if not helps, please read: C:\Program Files\InfinityBox\pinout\ChineseMiracle.txt
if not helps, please read: http://www.gsmhosting.com/vbb/showpost.php?p=2212036&postcount=7