U6 Pebl

[fonesintones]

My U6 has a problem . The Inner display shows the bootloader but when i switch on set the the inner display is not there but only externel display is present. Please why does the inner display show the bootloader version and not show display when powered on . PLEASE HELP!

[The Kop]

fone needs flashed with new software,
reflash and all shld be fine...
regards


THE KOP...

[fonesintones]

:(MR KOP.... i need a hardware solution and i have already flashed the phone several times with different versions . NO USE .......Only hardware not software .......Anyways thanks for your kind information:(

[hugues]

u are after solutions ,and i'm 99percent sure u'r pb is software ,still look for another version and flash u'r phone;and if i could ask :what happened to the phone?

[Bianchi]

Reflash IS the solution.

[thehien]

I have a U6, it can't not power on. I make Testpoin, repair PDS and flash full but 80% smart moto : clip communication failed. Log:
SmartMoto 2.35
S-Card: xxxxxxxxx Smart-Clip dongle, v 1.47, assigned Smart-Clip: xxxxxxxxx Europe, initializing... OK
Clip serial: xxxxxxxxx, version: 3.24, initializing... OK
Searching for phone... clip communication failed
Searching for phone... found S Blank Neptune LTE, getting test interface... interface not found
Switching to flash mode... OK
Reading phone boot version... 0.FF
Reading flash id... Intel - 28F256L18B
Phone group: A630,E1,E37x,E39x,E55x,L6,U6,V3,V190,V330,V53x,V54 x,V55x,V62x,V635,V80
Hardware IMEI: 356857005402535
IMEI OTP status: locked
Security area saved to "PDS for S Blank Neptune LTE 356857005402535 (4).mbk"
Login request... OK
Writing flash section 4 of 4... 100% (6.83 Kb/sec)
Restarting phone... OK
Searching for phone... found S Blank Neptune LTE
Switching to flash mode... OK
IMEI OTP status: locked
Repair PDS request... OK
Performing PDS repair... OK
Writing flash section 1 of 1... 100% (16 Kb/sec)
Please write a corresponding Full_flash file to phone to complete repair
Writing flash section 2 of 2... 88% (50.6 Kb/sec)
clip communication failed

Please help me, how to flash it !!!

But i flash it with the reflash file OK. But U6 not work: i press power button it only kb led, I hold * & # power on it into bootload OK.

[fonesintones]

i have flashed the u6 with every file present at Turbo support but still not ok. the inner display vanishes after the phone is on . Only external display and the kepad does not work > But the set shows the Bootloader version.
No Use Still The Same..............:mad:

[fonesintones]

Software solution Failed .Any HARD solution? Plzzzzzzzzzzzzzzzzzzzzz