Can we repair red light blink in DB2020

[sharaz191]

Can we repair red light blink in DB2020?

[SEMC]

At the moment, you cannot.

[eblaster101]

you can do this for free using kulankendi server

[shurubelul]

you can do this for free using kulankendi server

red light blink?!? :D

[damabib]

We Still Wait More Updates 4 Semcs Tools...prouds 2 Be Ur User

[NADEEM GONDAL]

if ur fone blink only red light plese us setool and just adentify ur fone will be ok

[eko_java_cell]

@unbeat of MBDIN,red blink is damage Gdfs for 2020 n 2012 just identify by setool n wiil be OK,are joking man??No one box solve this problem only change Nem flash chip N go with empty board. he..he...

[eblaster101]

red light blink?!? :D

yes tested many times as long as gdfs is fine which it is most the time identify with kulenkedi hold 2 +5 and enter cable it will repair

[goherabbas]

the best solution is buy dream box and all be done tested 10000000000000000000000%

[adnanskyland]

the best solution is buy dream box and all be done tested 10000000000000000000000%
First of all I would like to inform that you have post reply to very very old post. Check date of post first. And Dream box is not only the device to fix this problem Setool can also do this...

[sahil00150]

no bro still no solution for red blink........................

[gsmsikar]

now does this also repair red blinking problem in w580i ?


any latest development without TP ?

[samadgsm]

the best solution is buy ub box

[sbitla]

the best solution is buy DREAMBOX

[mobileclinic_14]

simple solution
identify your fone with setool check use server and upgrade erom
your problem will be solved :)

[gsmsikar]

simple solution
identify your fone with setool check use server and upgrade erom
your problem will be solved :)
i have tried each and every method using setool ,
but not the TP way as i dont want to open the phone ..

now i want to try cruiser for the first time .
so i am asking a lot of questions ..

please help me with the method ..

i can post setool log here ..

thanks

[sonujawed]

Read This:

q:
when i flashing/completing/etc phone i got error like

Code:
loader startup: executedLoader refused to start GDFS services,error is:29loader GDFS startup failed, that is fatalElapsed: 734 secs.
what to do ?

a:
that error can be caused by different problems. lets see all of them

1. user has run "executor" application, which was not deleted after "new altbypass unlock".

solution -
select correct model
on settings check only "use preloader security bypass".
execute any operation, say : "read flash"

2. main software somehow has been damaged (cause of free tools, etc)
solution -
select correct model
on settings check only "use signed mode".
add to firmware area only main part of firmware
press flash (use com/ufs or dcu60 with "2+5" keys if phone not connecting with "C" )
after that, phone should show identify normally.

.... and if not....

3. gdfs area has been damaged (bad flash ic, firmware error,etc)
solution -

a) install empty flash chip and do emptyboard fill procedure
b) try to repair gdfs area with VERY complex testpoints
c) change both mcu+flash chip from other phone




B.R.,
Sonu

i have tried each and every method using setool ,
but not the TP way as i dont want to open the phone ..

now i want to try cruiser for the first time .
so i am asking a lot of questions ..

please help me with the method ..

i can post setool log here ..

thanks

[gsmsikar]

i have done first two steps but the phone is still in same condition ..

if the problem is this the ?

3. gdfs area has been damaged (bad flash ic, firmware error,etc)
solution -

a) install empty flash chip and do emptyboard fill procedure
b) try to repair gdfs area with VERY complex testpoints
c) change both mcu+flash chip from other phone



what to do ?

how to repair this with cruiser or setool without making TP?

[sonujawed]

You Must Do Repair Your Fone With TP
here is video manual for TP
http://rapidshare.com/files/163515174/TP_Video.rar.html



B.R.,
Sonu



i have done first two steps but the phone is still in same condition ..

if the problem is this the ?

3. gdfs area has been damaged (bad flash ic, firmware error,etc)
solution -

a) install empty flash chip and do emptyboard fill procedure
b) try to repair gdfs area with VERY complex testpoints
c) change both mcu+flash chip from other phone



what to do ?

how to repair this with cruiser or setool without making TP?

[bashiruddinlkte]

use ultimate unlocker this is the best in world

[sansari]

Even; setool is the best for sonyericsson mobiles without exceptions..................................

[djlicks]

use ultimate unlocker this is the best in world

ultimate unlocker can not solve all problem gdfs tested by me for k550 and only dreambox can do it with tp

[mamo_mogon03]

of course not to make it for free. there is ub that Semc will support it.

[gsmsikar]

only ultimate unlocker can repair red blinking in db2020 without making TP //

all other need TP

[ANAYO BENEDICT]

yes setool can 4 cid 49. just use recovery n it will be ok

[jimmyyew1981]

dreambox is stable to tp red light blinking....1 do many oledi...........

[morton1984]

you need rpire gdfs cruiser good box you need log to rpire

[Miangee911]

use mt-se box it solves red light blinking problem without logs in DB2020.no hassel.;(