dear InfinitySupport finaly i got the pinout

[venuskarthick]

http://img32.picoodle.com/img/img32/9/9/20/f_mobilefrontm_d7c8b29.jpg

dear InfinitySupport finaly i got the pinout:):)hehe
1-ground,4-rx,11-tx but showing error on readflash plz see the log..:confused::confused:
==== log opened: [9/20/2007 4:04:07 PM] ====
Application: C:\Program Files\InfinityBox\ChineseMiracle\ChineseMiracle.ex e
Loading data, wait...
[Infinity Box] v1.49
S/N: 0997:010C
Wait...
Current device: Autodetect 6205-6227,6228 nor
Done
COM1 [Serial0] selected
error: can't open COM1
COM4 ready
COM4 [VCP0] selected
Device: Autodetect 6205-6227,6228 nor
Checking data, wait...
advanced flash detection active
Action: read NOR flash
Boot...
Press and HOLD Power button now !
baud autodetection active
19200
Connecting, wait...
Initializing[6219:8A01]...
boot step size: 0400
Release Power button now !
Boot Done
Initialize...
detecting chip #00 in region #00...
flash: B000B101000000:B000B100000000
flash: Sharp Intel std [def 0008x002000 007Fx010000] 8Mb
detecting chip #01 in region #00...
flash: B000B004000000:B000B000000000
flash: Sharp Intel std [def 007Fx010000 0008x002000] 8Mb
number of flash chip/regions detected: 02/01
Initialize Done
Set baud...
115200
Set baud Done
Check space...
device parameters autodetection in progress..
detecting chip #00 in region #00...
flash: B000B101000000:B000B100000000
flash: Sharp Intel std [def 0008x002000 007Fx010000] 8Mb
detecting chip #01 in region #00...
flash: B000B004000000:B000B000000000
flash: Sharp Intel std [def 007Fx010000 0008x002000] 8Mb
number of flash chip/regions detected: 02/01
total flash region size: 01000000
detect device identification, method #1...
detection phase #1...
.
detection phase #2...
.................................................. .....
detect device parameters finished
protocol ver: 01
ver. sw1: KCM_PCB01_GPRS_MT6219_EV.MAUI_05A_W05_36_MP_V10_F1 .BIN
ver. sw2: MAUI.05A.W05.36.MP.V10.F1
ffs offset/size: 00EC0000/00140000
detecting eeprom area in 2 chip(s)...
flash: B000B101000000:B000B100000000
checking area[00000000]: 00000000-007FFFFF...
flash: B000B004000000:B000B000000000
checking area[00800000]: 00000000-007FFFFF...
eeprom found near: 00E00000
detecting eeprom size...
eeprom size: 00200000
eeprom chip: 01
eeprom area: 00800000:00600000-007FFFFF
reading [flash[KCM_PCB01_GPRS_MT6219_EV.MAUI_05A_W05_36_MP_V10_F1 .BIN]]...
warning: data size mismatch at 0x00EDA000, retry...
warning: data size mismatch at 0x00EDA000, retry...
warning: data size mismatch at 0x00EDA000, retry...
warning: data size mismatch at 0x00EDA000, retry...
warning: data size mismatch at 0x00EDA000, retry...
warning: data size mismatch at 0x00EDA000, retry...
warning: data size mismatch at 0x00EDA000, retry...
warning: data size mismatch at 0x00EDA000, retry...
warning: data size mismatch at 0x00EDA000, retry...
error: too many retries during read operation
Probably errors exist during flash read operation.
Do you want to repeat read operation ?
operation canceled by user
file saved: backup_flash[KCM_PCB01_GPRS_MT6219_EV.MAUI_05A_W05_36_MP_V10_F1 .BIN]_20070920-163336.B0M.bin
Finished, time used: 1675 sec
Remove/Install battery now !

here is link for backup flash http://www.sendspace.com/file/9me800
see this & guid me how can i solv this problem...

[InfinityHelp]

hello!

but what is a problem with your phone? Not powering on, hang or restart?

[venuskarthick]

No sir there is no problem on this mobile it,s 100% working condetion mobile & it,s new mobile
i need flash file for this model
becoz i have same model 2 mobiles in dead Condetion

[InfinityHelp]

hello!

read out flash from working set and send it to infinityhelp@yahoo.com.hk.
we will prepair files to rescue other dead phones

[venuskarthick]

sir here i posted log is working set log only it,s the problem
when i try 2 read flash from new mobile it showing this error i tryed lot of time
but same result

[adebam]

can you show us the the pinout correctly maybe others could successfuly read the flash and send it to support@infinity.
Adebam

[adebam]

moreover which model of the phone are you trying

[InfinityHelp]

hello venuskarthick!

what cable are you using? Via infinity box?
battery is ok? also try a lower speed

[Santehnik]

I think it is no problem with a cable and with a phone.
Some time's Infinity can't repair this kind of phone (I don't know why). Because I had like this problems with few model of phone
warning: data size mismatch at 0x00EDA000, retry... and apiar a massage "retry or abort". By difirent box this phone is aliving. I'll send you a full information for this phone.

[venuskarthick]

SIR now I Got it
today i tryed with v1.51 it,s readed full flash thanks for ur kindness

here is mobile info

NAME: TOP
MODEL: GM608
CPU NAME:MT6219A
Phone Bottom Connector Type: 2x6_mini(12 pin,s)
PHONE RX: 4th pin
PHONE TX: 11th pin
PHONE IMAGE: FRONT & BACK (http://img40.picoodle.com/img/img40/9/9/17/f_mobilefrontm_92bdde7.jpg) CONNECTOR LOCATION (http://img36.picoodle.com/img/img36/9/9/17/f_pcbbackm_6860480.jpg)

INFINITY FLASH BACKUP LOG
Application: C:\Program Files\InfinityBox\ChineseMiracle\ChineseMiracle.ex e
Loading data, wait...
[Infinity Box] v1.51
S/N: 0997:010C
Wait...
Device: Autodetect 6205-6227,6228 NOR
Done
COM4 [VCP0] selected
Device: Autodetect 6205-6227,6228 NOR
Checking data, wait...
advanced flash detection active
Action: read NOR flash
Boot...
Press and HOLD Power button now !
baud autodetection active
19200
Connecting, wait...
Initializing[6219:8A01]...
boot step size: 0400
Release Power button now !
Boot Done
Initialize...
detecting chip #00 in region #00...
flash: B000B101000000:B000B100000000
flash: Sharp Intel std [def 0008x002000 007Fx010000] 8Mb
detecting chip #01 in region #00...
flash: B000B004000000:B000B000000000
flash: Sharp Intel std [def 007Fx010000 0008x002000] 8Mb
number of flash chip/regions detected: 02/01
Initialize Done
Set baud...
115200
Set baud Done
Identification...
device parameters autodetection in progress..
detecting chip #00 in region #00...
flash: B000B101000000:B000B100000000
flash: Sharp Intel std [def 0008x002000 007Fx010000] 8Mb
detecting chip #01 in region #00...
flash: B000B004000000:B000B000000000
flash: Sharp Intel std [def 007Fx010000 0008x002000] 8Mb
number of flash chip/regions detected: 02/01
total flash region size: 01000000
detect device identification, method #1...
detection phase #1...
.
detection phase #2...
.................................................. .....
detect device parameters finished
protocol ver: 01
ver. sw1: KCM_PCB01_GPRS_MT6219_EV.MAUI_05A_W05_36_MP_V10_F1 .BIN
ver. sw2: MAUI.05A.W05.36.MP.V10.F1
ffs offset/size: 00EC0000/00140000
detecting eeprom area in 2 chip(s)...
flash: B000B101000000:B000B100000000
checking area[00000000]: 00000000-007FFFFF...
flash: B000B004000000:B000B000000000
checking area[00800000]: 00000000-007FFFFF...
eeprom found near: 00E00000
detecting eeprom size...
eeprom size: 00200000
eeprom chip: 01
eeprom area: 00800000:00600000-007FFFFF
reading [flash[KCM_PCB01_GPRS_MT6219_EV.MAUI_05A_W05_36_MP_V10_F1 .BIN]]...
file saved: backup_flash[KCM_PCB01_GPRS_MT6219_EV.MAUI_05A_W05_36_MP_V10_F1 .BIN]_20070922-125655.B0M.bin
Finished, time used: 1730 sec
Remove/Install battery now

FLASH FILE BACKUP HERE http://www.sendspace.com/file/8zsmwg

[venuskarthick]

ok now how can i rescue other dead phones???

[InfinitySupport]

ok now how can i rescue other dead phones???

Flash phone with good flash file (f.e. your own backup from good phone) and then make "format ffs" if need.

[dannyogolo]

Flash phone with good flash file (f.e. your own backup from good phone) and then make "format ffs" if need.

Ok, IC.

@Infinitysupport,
I tot there should be something like ask/rpl ??

Also i suggest a sticked thread on simple tricks to repair major faults on these chinese phones.
Also what each button on the software can do. For instance whats NAND and CPU ? which do we format, etc. Things like this.

Today I successfully repaied a chinese phone by risking not to backup, bcos I was getting same error this guy got: mismatch, etc. I just decided to format without backup, and it worked.

Then again there is another chinese CPU model: 6226 - there are plenty here with this cpu. Are they supported ???

[InfinitySupport]

Ok, IC.

@Infinitysupport,
I tot there should be something like ask/rpl ??

Also i suggest a sticked thread on simple tricks to repair major faults on these chinese phones.
Also what each button on the software can do. For instance whats NAND and CPU ? which do we format, etc. Things like this.

Today I successfully repaied a chinese phone by risking not to backup, bcos I was getting same error this guy got: mismatch, etc. I just decided to format without backup, and it worked.

Then again there is another chinese CPU model: 6226 - there are plenty here with this cpu. Are they supported ???

D:\Program Files\InfinityBox\Documentation\Infinity-Box_How_to_repair_dead_Chinese_phone_MT6226_MT6227 _etc_En.htm

D:\Program Files\InfinityBox\Documentation\Infinity-Box_ChineseMiracle_How_to_repair_reboot_with_sim.t xt

D:\Program Files\InfinityBox\Documentation\Infinity-Box_How_to_calculate_ChineseMiracle_Ask-Rpl.jpg

CPU: select according to phone hardware

ASK/RPL: software suggest you when it's need

Always make backup to avoid your lost time during searching backup files for your phone.

6226, 6227, 6228 CPU is supported.