View Full Version : <<<Booommm use second hand uem on working pcbs solution here>>>
TelemasteR®
09-21-2007, 12:20
With This solution u will never buy new uem ic again just use your rattletrap phones Uem Ic
tested buy me many times works done!!
How to use un fixed uem from Asic 5 and asic 6 phones on asic 2 phones?
step by step here:
1- Change Uem Ic
2- Then check ur phone working or not working (If not working then connect to your with flasher and make full erase.)
3- Then Full Flash Phone.
4- Write Pm File
5- connect phone to your flasher and get the imei number in uem
6- Open Ufs and Click Read Uem Write the imei u get in action 5 then click ok.
7- and now ufs ask u uem changed? enter "0" then click ok
8- now convert your ask to rpl and write your rpl file
9- unlock option done!!!!!!
<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
How to use unfixed uem from Asic 2 and asic 6 phones on Wd2 and asic 5 phones?
step by step here:
1- Change Uem Ic
2- Then check ur phone working or not working(If not work then connect your with flasher and make full erase.)
3- when erase option finished click erase Flash and make all these adresses erased manualy
start: 00000000 end: 00FFFFFF
start: 02000000 end: 02FFFFFF
start: 04000000 end: 047FFFFF
start: 00010000 end: 0000FFFF
start: 02000000 end: 00FFFFFF
start: 02FC0000 end: 0286FFFF
start: 02A00000 end: 0000FFFF
4- Then Full Flash Phone
5- Write Pm File
6- connect phone to your flasher and get the imei number in uem
7- Open Ufs and Click Read Uem Write the İmei u get in action 5 then click ok
8- and now ufs ask u uem changed? enter "0" then click ok
9- now convert your ask to rpl and write your rpl file
10-unlock and format user area done!!!
<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
How to use unfixed uem from Asic 2 and asic 2 phones on asic 6 phones?
step by step here:
1- Change Uem Ic
2- Then check ur phone working or not working(If not working then connect your with flasher and make full erase.)
3- Then Full Flash Phone
4- Write Pm File
5- connect phone to your flasher and get the imei number in uem
6- Open Ufs and Click Read Uem Write the İmei u get in action 5 then click ok.
7- and now ufs ask u uem changed? enter "0" then click ok
8- now convert your ask to rpl and write your rpl file
9- unlock option done!!!!!!
notice:When u change Uem Ic u can check the uem imeı form Jaf or Mt box makeing Read Uem Option.
B.r ..::TELEMASTER::.. www.Gsm-City.org
Really helpfull. Good work dear keep it up.
Nurettin Duman
09-21-2007, 12:29
super well is all ok :D
tunjay-gsm
09-21-2007, 12:59
good very good this is very nice its legand thank u very mach very help thank u telmasters
priyanka
09-21-2007, 12:59
thats really a gr8 info thanx m8
good work bro.....ill make a try....
westbills
09-21-2007, 13:23
Am a newbie, which device do we use to change UEM IC.
In addition, is uem ic always available in the market?
GsmTracer
09-21-2007, 13:27
solution exist for long time already... for this..
TelemasteR®
09-21-2007, 13:29
Am a newbie, which device do we use to change UEM IC.
In addition, is uem ic always available in the market?
u can change Uem Ic Using Hotair Machine (If u a Begginer dont try this)
good work. good work. good work .
celluniversal
09-21-2007, 13:52
With This solution u will never buy new uem ic again just use your rattletrap phones Uem Ic
tested buy me many times works done!!
How to use un fixed uem from Asic 5 and asic 6 phones on asic 2 phones?
step by step here:
1- Change Uem Ic
2- Then check ur phone working or not working (If not working then connect to your with flasher and make full erase.)
3- Then Full Flash Phone.
4- Write Pm File
5- connect phone to your flasher and get the imei number in uem
6- Open Ufs and Click Read Uem Write the imei u get in action 5 then click ok.
7- and now ufs ask u uem changed? enter "0" then click ok
8- now convert your ask to rpl and write your rpl file
9- unlock option done!!!!!!
<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
How to use unfixed uem from Asic 2 and asic 6 phones on Wd2 and asic 5 phones?
step by step here:
1- Change Uem Ic
2- Then check ur phone working or not working(If not work then connect your with flasher and make full erase.)
3- when erase option finished click erase Flash and make all these adresses erased manualy
start: 00000000 end: 00FFFFFF
start: 02000000 end: 02FFFFFF
start: 04000000 end: 047FFFFF
start: 00010000 end: 0000FFFF
start: 02000000 end: 00FFFFFF
start: 02FC0000 end: 0286FFFF
start: 02A00000 end: 0000FFFF
4- Then Full Flash Phone
5- Write Pm File
6- connect phone to your flasher and get the imei number in uem
7- Open Ufs and Click Read Uem Write the İmei u get in action 5 then click ok
8- and now ufs ask u uem changed? enter "0" then click ok
9- now convert your ask to rpl and write your rpl file
10-unlock and format user area done!!!
<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
How to use unfixed uem from Asic 2 and asic 2 phones on asic 6 phones?
step by step here:
1- Change Uem Ic
2- Then check ur phone working or not working(If not working then connect your with flasher and make full erase.)
3- Then Full Flash Phone
4- Write Pm File
5- connect phone to your flasher and get the imei number in uem
6- Open Ufs and Click Read Uem Write the İmei u get in action 5 then click ok.
7- and now ufs ask u uem changed? enter "0" then click ok
8- now convert your ask to rpl and write your rpl file
9- unlock option done!!!!!!
notice:When u change Uem Ic u can check the uem imeı form Jaf or Mt box makeing Read Uem Option.
B.r ..::TELEMASTER::.. www.Gsm-City.org
When u change Uem Ic u can check the uem imeı form Jaf or Mt box makeing Read Uem Option.
ru sure that new uem show imei there??
this thread have nothing to do with uem using..
there is no usefull info about use used uem.
there is no usefull info about repair imei.
TelemasteR®
09-21-2007, 14:10
When u change Uem Ic u can check the uem imeı form Jaf or Mt box makeing Read Uem Option.
ru sure that new uem show imei there??
this thread have nothing to do with uem using..
there is no usefull info about use used uem.
there is no usefull info about repair imei.
Dear did u try thıs solution u are writeing here some thıng but ı am using thıs way about 1 year and havent got any problem !!!
kashi4gul
09-21-2007, 14:18
With This solution u will never buy new uem ic again just use your rattletrap phones Uem Ic
tested buy me many times works done!!
How to use un fixed uem from Asic 5 and asic 6 phones on asic 2 phones?
step by step here:
1- Change Uem Ic
2- Then check ur phone working or not working (If not working then connect to your with flasher and make full erase.)
3- Then Full Flash Phone.
4- Write Pm File
5- connect phone to your flasher and get the imei number in uem
6- Open Ufs and Click Read Uem Write the imei u get in action 5 then click ok.
7- and now ufs ask u uem changed? enter "0" then click ok
8- now convert your ask to rpl and write your rpl file
9- unlock option done!!!!!!
<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
How to use unfixed uem from Asic 2 and asic 6 phones on Wd2 and asic 5 phones?
step by step here:
1- Change Uem Ic
2- Then check ur phone working or not working(If not work then connect your with flasher and make full erase.)
3- when erase option finished click erase Flash and make all these adresses erased manualy
start: 00000000 end: 00FFFFFF
start: 02000000 end: 02FFFFFF
start: 04000000 end: 047FFFFF
start: 00010000 end: 0000FFFF
start: 02000000 end: 00FFFFFF
start: 02FC0000 end: 0286FFFF
start: 02A00000 end: 0000FFFF
4- Then Full Flash Phone
5- Write Pm File
6- connect phone to your flasher and get the imei number in uem
7- Open Ufs and Click Read Uem Write the İmei u get in action 5 then click ok
8- and now ufs ask u uem changed? enter "0" then click ok
9- now convert your ask to rpl and write your rpl file
10-unlock and format user area done!!!
<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
How to use unfixed uem from Asic 2 and asic 2 phones on asic 6 phones?
step by step here:
1- Change Uem Ic
2- Then check ur phone working or not working(If not working then connect your with flasher and make full erase.)
3- Then Full Flash Phone
4- Write Pm File
5- connect phone to your flasher and get the imei number in uem
6- Open Ufs and Click Read Uem Write the İmei u get in action 5 then click ok.
7- and now ufs ask u uem changed? enter "0" then click ok
8- now convert your ask to rpl and write your rpl file
9- unlock option done!!!!!!
notice:When u change Uem Ic u can check the uem imeı form Jaf or Mt box makeing Read Uem Option.
B.r ..::TELEMASTER::.. www.Gsm-City.org (http://www.Gsm-City.org)
How u can convert ask to rpl .......... ?
Ask to Rpl service is not free ......
U can not perform any operation untill
uem will fit absolutely, which is not ez job.
The batter way for Rebuild Imei is
Ask to Rpl service .......
Read only Ask file then buy Rpl file
from any official site ......
Rpl file can rebuild imei without change uem...
B.R.,
kashi4gul
TelemasteR®
09-21-2007, 14:30
How u can convert ask to rpl .......... ?
Ask to Rpl service is not free ......
U can not perform any operation untill
uem will fit absolutely, which is not ez job.
The batter way for Rebuild Imei is
Ask to Rpl service .......
Read only Ask file then buy Rpl file
from any official site ......
Rpl file can rebuild imei without change uem...
B.R.,
kashi4gul
Did u read my post carefull ?
did ı say ask 2 rpl serviceis free?
stop posting wrong answers :mad:
How u can convert ask to rpl .......... ?
The batter way for Rebuild Imei is
Ask to Rpl service .......
Read only Ask file then buy Rpl file
from any official site ......
Rpl file can rebuild imei without change uem...
B.R.,
kashi4gul
yes bro if imei of flash area is damaged then u no need to change uem but if imei of uem area is damage then wht u will do:confused:
With This solution u will never buy new uem ic again just use your rattletrap phones Uem Ic
tested buy me many times works done!!
How to use un fixed uem from Asic 5 and asic 6 phones on asic 2 phones?
step by step here:
1- Change Uem Ic
2- Then check ur phone working or not working (If not working then connect to your with flasher and make full erase.)
3- Then Full Flash Phone.
4- Write Pm File
5- connect phone to your flasher and get the imei number in uem
6- Open Ufs and Click Read Uem Write the imei u get in action 5 then click ok.
7- and now ufs ask u uem changed? enter "0" then click ok
8- now convert your ask to rpl and write your rpl file
9- unlock option done!!!!!!
<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
How to use unfixed uem from Asic 2 and asic 6 phones on Wd2 and asic 5 phones?
step by step here:
1- Change Uem Ic
2- Then check ur phone working or not working(If not work then connect your with flasher and make full erase.)
3- when erase option finished click erase Flash and make all these adresses erased manualy
start: 00000000 end: 00FFFFFF
start: 02000000 end: 02FFFFFF
start: 04000000 end: 047FFFFF
start: 00010000 end: 0000FFFF
start: 02000000 end: 00FFFFFF
start: 02FC0000 end: 0286FFFF
start: 02A00000 end: 0000FFFF
4- Then Full Flash Phone
5- Write Pm File
6- connect phone to your flasher and get the imei number in uem
7- Open Ufs and Click Read Uem Write the İmei u get in action 5 then click ok
8- and now ufs ask u uem changed? enter "0" then click ok
9- now convert your ask to rpl and write your rpl file
10-unlock and format user area done!!!
<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
How to use unfixed uem from Asic 2 and asic 2 phones on asic 6 phones?
step by step here:
1- Change Uem Ic
2- Then check ur phone working or not working(If not working then connect your with flasher and make full erase.)
3- Then Full Flash Phone
4- Write Pm File
5- connect phone to your flasher and get the imei number in uem
6- Open Ufs and Click Read Uem Write the İmei u get in action 5 then click ok.
7- and now ufs ask u uem changed? enter "0" then click ok
8- now convert your ask to rpl and write your rpl file
9- unlock option done!!!!!!
notice:When u change Uem Ic u can check the uem imeı form Jaf or Mt box makeing Read Uem Option.
B.r ..::TELEMASTER::.. www.Gsm-City.org (http://www.Gsm-City.org)
BROTHER..I UNDERSTOOD THE WHOLE PROCESS..BUT A SMALL CONFUSION.:confused:???.......
WOULD WE NEED TO REBUILD IMEI{FROM ANY PROFESSIONAL SITE} IN YOUR GIVEN STEPS{STEP8}.....:confused:
TelemasteR®
09-23-2007, 14:55
Step 8 is convert ur ask file to rpl:
simply u can use griffin server to make this action
ı will also upload here this exe, but ask2rpl server is not for free u have to buy logs (just ask ur reseller for buying logs)