Successfully Flashed N88 with Infinity

[.::KHURRAM::.]

COM5 [VCP0] selected
Device: Autodetect: 6205-6227, 6228
Checking data, wait...
advanced flash detection active
Action: reset
Boot...
Press and HOLD Power button now !
baud autodetection active
19200
Connecting, wait...
Initializing[6226:8A02:8A01]...
high speed disabled
boot step size: 0002
Release Power button now !
Boot Done
Initialize...
detecting chip #00 in region #00...
flash: EC257E25082501:29EA0000000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
number of flash chip/regions detected: 01/01
Initialize Done
Set baud...
921600
Set baud Done
Check space...
device parameters autodetection in progress..
detecting chip #00 in region #00...
flash: EC257E25082501:29EA0000000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
number of flash chip/regions detected: 01/01
total flash region size: 01000000
detect device identification, method #1...
detection phase #1...
detect device parameters finished
structure: 2nd [enhanced] (or higher) generation
New firmware detected: ZL1_KX_PCB01_GPRS_MT6226_S01.ZL1_KX_1_02.BIN
- make "Read detailed information, ask/rpl" operation
- send "backup_system_log_..." file to support
- make "Read full flash" operation
- send flash backup file(s) to support
- include in your e-mail full text from phone back label (phone name etc.)
identification data Ok
identification data backup saved: id.1BEC1EB8.[ZL1_KX_PCB01_GPRS_MT6226_S01.ZL1_KX_1_02.BIN_F07FF 99D].rpl
identification detection finished
device-id: 1BEC1EB8
protocol ver: 04
ver. sw1: ZL1_KX_PCB01_GPRS_MT6226_S01.ZL1_KX_1_02.BIN
ver. sw2: ZL1_KX_1.02
ffs offset/size: 00E00000/00200000
detecting eeprom area in 1 chip(s)...
flash: EC257E25082501:29EA0000000000
checking area[00000000]: 00000000-00FFFFFF...
eeprom found near: 00E00000
detecting eeprom size...
eeprom size: 00200000
eeprom chip: 00
eeprom area: 00000000:00E00000-00FFFFFF
reading [eeprom[ZL1_KX_PCB01_GPRS_MT6226_S01.ZL1_KX_1_02.BIN]]...
file saved: backup_eeprom[ZL1_KX_PCB01_GPRS_MT6226_S01.ZL1_KX_1_02.BIN]_20070921-142925.B0E.bin
flash: EC257E25082501:29EA0000000000
Check space Done
Manipulation...
Manipulation Done
Finalization...
Finalization Done
Write...
formatting...
flash: EC257E25082501:29EA0000000000
Write Done
file saved: backup_system_log_1BEC1EB8_ZL1_KX_PCB01_GPRS_MT622 6_S01.ZL1_KX_1_02.BIN_F07FF99D_20070921-142942.B0X.bin
Finished, time used: 166 sec
Remove/Install battery now !

[InfinitySupport]

Thank you very much for test report.
Please, send backup_system_log_1BEC1EB8_ZL1_KX_PCB01_GPRS_MT622 6_S01.ZL1_KX_1_02.BIN_F07FF99D_20070921-142942.B0X.bin file to InfinityHelp@yahoo.com.hk