error

[TechPhone]

[00:17:03] Power off the phone...
[00:17:03] Hold 'C' button (for W880 '2') and insert DCU-60 USB cable.

[00:17:14] ERROR: Could not connect to device:
[00:17:14] - make sure device is connected in flash mode
[00:17:14] - USB flash drivers is installed
[00:17:14] - debugger/monitor software is turned off

k800i, k810i getting me same error whats wrong

[SEMC]

Are you following the instructions? The error above may give you some hints why the communication could not established with phone.
Make sure that the phone battery level is ~50% and that you are using the original DCU-60 USB cable.

[TechPhone]

battery lavel 100% full & i cable used DCU-60 original

[SEMC]

Hold it's C-button and insert the USB cable, then go to the Device Manager and maximize the Universal Serial Bus Controller section with the [+] icon and capture a screenshot of the section and attach it here please.

[TechPhone]

SEMC USB Flash getting me yellow mark i install driver every time but getting me yellow mark

thanks 4 ur reply

[SEMC]

Just update the USB flash drivers to the latest ones.

[TechPhone]

C:\Program Files\Axalto\e-gate drivers 3.0.6.0 i updated with this version but same every time detected yellow mark

[SEMC]

Wrong! Please download and install the following file for USB flash cable drivers:

http://67.15.14.10/~mirror/gg-setup.zip

Point Windows for updating drivers (if prompted, or still yellow mark in the Device Manager) to "C:\Program Files\Sony Ericsson\Gordons Gate"

Hope it helps!

[TechPhone]

thanks 4 help working now