No power on after Prepare C168

[zbycho9]

hello I got this problem after prepare option there is error and now when I prepare again I got this log

COM3 [VCP0] selected
Device: Motorola C168
Checking data, wait...
Action: unlock (prepare)
Boot...
Phone should be Switched OFF !
Press Power button now !
Connecting...
Boot Done
Check Connection...
Check Connection Done
Set Baud...
Set Baud Done
Check Flash...
SW ver: 1390-000
HW ver: TCT-7-
Check Flash Done
Check Parameters...
file saved: backup_eeprom_calibration_20071003-105707.69E.bin
error: unknown or damaged device, read flash and send to support
Check Parameters Fail
Finished, time used: 70 sec
Remove/Install battery now !

fon is not power on in this moment

I try to re-write calibration eprom buckup but noting change what i must do to back him to life

eprom??
full flash ??

Regards

[T0T0]

bro.... you have to fullflash with main, lang,flex.. your problem is solve

[InfinityHelp]

hello!

yes, that is right. flash your phone and it will be back to working state