View Full Version : IPHONE Unlock Problem .... Firmware Already Patched
Aamir_Zia
10-12-2007, 01:45
Restored to 1.02
All Processes Done smoothly
at Last Proceedure anySim 1.02 Gives error in Unlocking & says The Firmware is Already Patched & anySIM will Quit ...
I dont know whats the problem
*3001#12345#* + Call Button
Firmware Version = 04.01.13_G
Maybe this Firmware is Higher . :confused:
Norberto_
10-12-2007, 01:57
Your problem is the Modem version 4.01.13_G
The phone FW is 1.02 but the Modem is NEW.
There's no free method to unlock new modem ver. yet!
Only payment method available!
http://iphone.unlock.no http://iphone.unlock.no please check here
nctrung_vn
10-12-2007, 02:52
Thank alot for good solution to do this.
Best & regards
..............And when you tried another sim in the phone?
Aamir_Zia
10-12-2007, 11:23
Your problem is the Modem version 4.01.13_G
The phone FW is 1.02 but the Modem is NEW.
There's no free method to unlock new modem ver. yet!
Only payment method available!
Can U Please post the Modems Version which are Not Unlockable
Also please post those Modem versions which are supported ......
@AMIR
Version = 04.01.13_G
CANT SUCCESS WITH FREE STUFF
rajan nishchal
10-12-2007, 13:12
Can U Please post the Modems Version which are Not Unlockable
Also please post those Modem versions which are supported ......
MODEM VERSION WHICH ARE NOT SUPPORTED :04.01.13_G
MODEM VERSION WHICH ARE SUPPORTED :3.14.28
Firmware Check: If your phone has already been activated, go to start - settings - general - about – version
If your phone has not already been activated, do the following
1. If your screen has a message asking you to activate the phone slide your finger as though you are making an “emergency call”
2. Enter *3001#12345#* on the keypad.
3. Press Call
4. From the Field Test Menu Choose versions and look for a Firmware version that starts with 3.14. If you have 3.14 you are at the current firmware in this guide which is 1.0.2. If its not 3.14 not you will need to update your firmware
bro thanx for sharing it us here....
go here http://forum.gsmhosting.com/vbb/showthread.php?t=454343
algersmehdi
12-01-2007, 01:41
what about new firmware version 04.02.13_G is it possible to unlock ?
To Rajan
tito millo
12-01-2007, 01:48
Restored to 1.02
All Processes Done smoothly
at Last Proceedure anySim 1.02 Gives error in Unlocking & says The Firmware is Already Patched & anySIM will Quit ...
I dont know whats the problem
*3001#12345#* + Call Button
Firmware Version = 04.01.13_G
Maybe this Firmware is Higher . :confused:
Hi bro u have to revirginize ur iphone u will find the soltion on www.hackint0sh.org (http://www.hackint0sh.org)
BR,
Tito Millo
clinicgsm
12-01-2007, 16:24
because if you downgrade to 1.0.2, you have to down Base band to 03.14.08, with putty and winscp(wifi), original or natif 1.0.2, after, virginize,unlock(iunlock), update to 1.1.1 unlock ,*#307# puis CALL...etc...and after jailbreak brasco ,up to 1.1.2 / down 1.1.1 / unlock / and return 1.1.2 100%testé ok
@ webmaster to gsmhosting.com, excuse me if i put my web site because it's too long to explain here, it's not pub spam
www.i-phone-hosting.com
respect step by step with at&t card or orange card and one other different operator
B.R