View Full Version : c92 boot error, infinity help ?
aloksoni
10-17-2007, 11:49
COM11 [VCP0] selected
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection active
Action: read eeprom
Boot...
Press and HOLD Power button now !
baud autodetection active
error: boot initialization step-2 failed: 02
error: boot initialization step-2 failed: 06
error: boot initialization step-2 failed: 02
error: boot initialization step-2 failed: 02
error: boot initialization step-2 failed: 02
error: boot initialization step-2 failed: 02
error: boot initialization step-2 failed: 02
error: boot initialization step-2 failed: 02
error: boot initialization step-2 failed: 02
error: boot initialization step-2 failed: 02
error: boot initialization step-2 failed: 02
error: boot initialization step-2 failed: 06
error: boot initialization step-2 failed: 02
error: boot initialization step-2 failed: 02
error: boot initialization step-2 failed: 02
error: boot initialization step-2 failed: 02
error: boot initialization step-2 failed: 02
error: boot initialization step-2 failed: 02
error: boot initialization step-2 failed: 02
error: boot initialization step-2 failed: 02
error: boot initialization step-2 failed: 02
error: boot initialization step-2 failed: 02
error: boot initialization step-2 failed: 06
error: boot initialization step-2 failed: 02
error: boot initialization step-2 failed: 02
error: boot initialization step-2 failed: 02
error: boot initialization step-2 failed: 02
error: boot initialization step-2 failed: 02
error: can't detect device
Release Power button now !
in case of initial connection problem: on/off "Boot baudrate autoselect" box.
Boot Fail
Finished, time used: 10 sec
Remove/Install battery now !
MNGASHNET
10-17-2007, 13:21
check ur cables piont and batter must full i hope this can help u
aloksoni
10-17-2007, 14:47
[quote=aloksoni;2799431]COM11 [VCP0] selected
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection active
Action: read eeprom
Boot...
Press and HOLD Power button now !
baud autodetection active
error: boot initialization step-2 failed: 02
error: boot initialization step-2 failed: 06
error: boot initialization step-2 failed: 02
error: boot initialization step-2 failed: 02
error: boot initialization step-2 failed: 02
error: boot initialization step-2 failed: 02
error: boot initialization step-2 failed: 02
error: boot initialization step-2 failed: 02
error: boot initialization step-2 failed: 02
error: boot initialization step-2 failed: 02
error: boot initialization step-2 failed: 02
error: boot initialization step-2 failed: 06
error: boot initialization step-2 failed: 02
error: boot initialization step-2 failed: 02
error: boot initialization step-2 failed: 02
error: boot initialization step-2 failed: 02
error: boot initialization step-2 failed: 02
error: boot initialization step-2 failed: 02
error: boot initialization step-2 failed: 02
error: boot initialization step-2 failed: 02
error: boot initialization step-2 failed: 02
error: boot initialization step-2 failed: 02
error: boot initialization step-2 failed: 06
error: boot initialization step-2 failed: 02
error: boot initialization step-2 failed: 02
error: boot initialization step-2 failed: 02
error: boot initialization step-2 failed: 02
error: boot initialization step-2 failed: 02
error: can't detect device
Release Power button now !
in case of initial connection problem: on/off "Boot baudrate autoselect" box.
Boot Fail
Finished, time used: 10 sec
Remove/Install battery now !
but read information is ok
mobilegsm30
10-17-2007, 15:33
hello infinty team i have C92 booting error see log
COM7 [VCP0] selected
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection active
Action: read NOR flash
Boot...
Press and HOLD Power button now !
Connecting, wait...
error: boot phase#1 failed
Release Power button now !
in case of initial connection problem: on/off "Boot baudrate autoselect" box.
Boot Fail
Finished, time used: 5 sec
Remove/Install battery now !
And i have read info
Action: read information
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched ON !
Connecting, wait...
Phone detected, wait...
Hardware version: MT6226, E02
Hardware version: TELSDA26_05C_HW
Software version: MAUI.05C.W06.16.MP.V
Software date: 2005.04.12
Barcode: MT012345678901234567
imei: 358352200231664
Finished, time used: 7 sec
Power off phone now !
any solution for that prob ?
MNGASHNET
10-17-2007, 15:48
[quote=aloksoni;2799431]COM11 [VCP0] selected
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection active
Action: read eeprom
Boot...
Press and HOLD Power button now !
baud autodetection active
error: boot initialization step-2 failed: 02
error: boot initialization step-2 failed: 06
error: boot initialization step-2 failed: 02
error: boot initialization step-2 failed: 02
error: boot initialization step-2 failed: 02
error: boot initialization step-2 failed: 02
error: boot initialization step-2 failed: 02
error: boot initialization step-2 failed: 02
error: boot initialization step-2 failed: 02
error: boot initialization step-2 failed: 02
error: boot initialization step-2 failed: 02
error: boot initialization step-2 failed: 06
error: boot initialization step-2 failed: 02
error: boot initialization step-2 failed: 02
error: boot initialization step-2 failed: 02
error: boot initialization step-2 failed: 02
error: boot initialization step-2 failed: 02
error: boot initialization step-2 failed: 02
error: boot initialization step-2 failed: 02
error: boot initialization step-2 failed: 02
error: boot initialization step-2 failed: 02
error: boot initialization step-2 failed: 02
error: boot initialization step-2 failed: 06
error: boot initialization step-2 failed: 02
error: boot initialization step-2 failed: 02
error: boot initialization step-2 failed: 02
error: boot initialization step-2 failed: 02
error: boot initialization step-2 failed: 02
error: can't detect device
Release Power button now !
in case of initial connection problem: on/off "Boot baudrate autoselect" box.
Boot Fail
Finished, time used: 10 sec
Remove/Install battery now !
but read information is ok
wheres the info there error check ur cables point tx and rx same wrrong u make
aloksoni
10-17-2007, 16:46
[quote=aloksoni;2799861]
wheres the info there error check ur cables point tx and rx same wrrong u make
sirrrrrrr ,......
read information is ok
mobilegsm30
10-17-2007, 16:50
[quote=MNGASHNET;2799994]
sirrrrrrr ,......
read information is ok
Hello see this post
http://forum.gsmhosting.com/vbb/showthread.php?t=455276
aloksoni
10-17-2007, 18:38
COM11 [VCP0] selected
Phone should be Switched OFF !
Press and HOLD Power button now !
error: boot initialization step-2 failed: 02
error: boot initialization step-2 failed: 02
error: boot initialization step-2 failed: 02
error: boot initialization step-2 failed: 02
error: boot initialization step-2 failed: 02
error: boot initialization step-2 failed: 02
error: boot initialization step-2 failed: 02
error: boot initialization step-2 failed: 02
error: boot initialization step-2 failed: 02
error: boot initialization step-2 failed: 02
error: boot initialization step-2 failed: 02
error: boot initialization step-2 failed: 02
error: boot initialization step-2 failed: 02
error: boot initialization step-2 failed: 02
error: boot initialization step-2 failed: 02
error: boot initialization step-2 failed: 02
error: boot initialization step-2 failed: 02
error: boot initialization step-2 failed: 02
error: boot initialization step-2 failed: 02
error: boot initialization step-2 failed: 02
error: boot initialization step-2 failed: 02
error: boot initialization step-2 failed: 02
error: boot initialization step-2 failed: 02
error: boot initialization step-2 failed: 02
error: boot initialization step-2 failed: 02
error: boot initialization step-2 failed: 02
error: boot initialization step-2 failed: 02
error: boot initialization step-2 failed: 02
error: boot initialization step-2 failed: 02
error: boot initialization step-2 failed: 02
error: boot initialization step-2 failed: 02
error: boot initialization step-2 failed: 02
error: boot initialization step-2 failed: 02
error: boot initialization step-2 failed: 02
error: boot initialization step-2 failed: 02
error: boot initialization step-2 failed: 02
error: boot initialization step-2 failed: 02
error: boot initialization step-2 failed: 02
error: boot initialization step-2 failed: 02
error: boot initialization step-2 failed: 02
error: boot initialization step-2 failed: 02
error: boot initialization step-2 failed: 02
error: boot initialization step-2 failed: 02
error: boot initialization step-2 failed: 02
error: boot initialization step-2 failed: 02
error: boot initialization step-2 failed: 02
error: can't activate test moide
Operation failed !
Finished, time used: 27 sec
Remove/Install battery now !
read information is ok bhoth poiouts 1 sim uper 4 goldan points & cable {1x20} pin ........problam is same need help...........
MNGASHNET
10-17-2007, 18:41
[QUOTE=aloksoni;2800162]
Hello see this post
http://forum.gsmhosting.com/vbb/showthread.php?t=455276
THANK BRO I READ NOW
InfinitySupport
10-17-2007, 19:14
@aloksoni
you must find other rx/tx pinout due to phone may have 2 pairs of rx/t signals.
1st pair: for test mode only (f.e. read info and write imei)
2nd pair: for boot/flash
so you must find 2nd rx/tx pair.
aloksoni
10-18-2007, 08:58
@aloksoni
you must find other rx/tx pinout due to phone may have 2 pairs of rx/t signals.
1st pair: for test mode only (f.e. read info and write imei)
2nd pair: for boot/flash
so you must find 2nd rx/tx pair.
i find 2 pair.......first is just uper sim tray 4 goldan poins
& 2nd is data cable 13tx 12RX & 3 gnd bu problam is same
InfinitySupport
10-18-2007, 10:02
if problem "the same" this means that you have found wrong pinout.
Hallo Aloksoni!
Can leave pinouts for this C92 here?
trhanks in advance
mobilegsm30
10-19-2007, 08:39
if problem "the same" this means that you have found wrong pinout.
hello
i have repair C92 blutooth but not in Infinity please check Infinity team pinout is 12RX 13TX working with other box see your box logs :rolleyes:
COM7 [VCP0] selected
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection active
Action: read NOR flash
Boot...
Press and HOLD Power button now !
Connecting, wait...
error: boot phase#1 failed
Release Power button now !
in case of initial connection problem: on/off "Boot baudrate autoselect" box.
Boot Fail
Finished, time used: 5 sec
Remove/Install battery now !
And i have read info
Action: read information
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched ON !
Connecting, wait...
Phone detected, wait...
Hardware version: MT6226, E02
Hardware version: TELSDA26_05C_HW
Software version: MAUI.05C.W06.16.MP.V
Software date: 2005.04.12
Barcode: MT012345678901234567
imei: 358352200231664
Finished, time used: 7 sec
Power off phone now !
InfinityHelp
10-19-2007, 13:37
hello!
this pinout will work with infinity also. but only for Powered ON phone mode.
for boot mode there is other pair of tx, rx.
mobilegsm30
10-19-2007, 14:03
hello!
this pinout will work with infinity also. but only for Powered ON phone mode.
for boot mode there is other pair of tx, rx.
Hello i have also read write flash with boot mode. other box work with this pinout ?
sselectronics
01-13-2008, 13:50
Hello Sir Same problem with my C92
COM5 selected
Action: reset settings
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
error: can't activate test moide
error: operation failed !
Finished, time used: 30 sec
Remove/Install battery now !
This is the log for format ffs
Action: read information
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched ON !
Connecting, wait...
Phone detected, wait...
Hardware version: MT6226, E02
Hardware version: TELSDA26_05C_HW
Software version:
Software date: 2005.04.12
Barcode: MT012345678901234567
imei: 358352200701683
Finished, time used: 8 sec
Power off phone now !
This is the read info log please help
sphinxxx2
01-13-2008, 14:02
COM11 [VCP0] selected
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection active
Action: read eeprom
Boot...
Press and HOLD Power button now !
baud autodetection active
error: boot initialization step-2 failed: 02
error: boot initialization step-2 failed: 06
error: boot initialization step-2 failed: 02
error: boot initialization step-2 failed: 02
error: boot initialization step-2 failed: 02
error: boot initialization step-2 failed: 02
error: boot initialization step-2 failed: 02
error: boot initialization step-2 failed: 02
error: boot initialization step-2 failed: 02
error: boot initialization step-2 failed: 02
error: boot initialization step-2 failed: 02
error: boot initialization step-2 failed: 06
error: boot initialization step-2 failed: 02
error: boot initialization step-2 failed: 02
error: boot initialization step-2 failed: 02
error: boot initialization step-2 failed: 02
error: boot initialization step-2 failed: 02
error: boot initialization step-2 failed: 02
error: boot initialization step-2 failed: 02
error: boot initialization step-2 failed: 02
error: boot initialization step-2 failed: 02
error: boot initialization step-2 failed: 02
error: boot initialization step-2 failed: 06
error: boot initialization step-2 failed: 02
error: boot initialization step-2 failed: 02
error: boot initialization step-2 failed: 02
error: boot initialization step-2 failed: 02
error: boot initialization step-2 failed: 02
error: can't detect device
Release Power button now !
in case of initial connection problem: on/off "Boot baudrate autoselect" box.
Boot Fail
Finished, time used: 10 sec
Remove/Install battery now !
DISCONNECT UPPER BOARD (WICH WITH KEYPAD) AND TRY. USE PINS 12,13 AS TX,RX AND 3 AS GND. GOOD LUCK!
sselectronics
02-24-2008, 09:48
ya this solution works as the key pad bord has sky work ics below the bord very easy to disconnect and connect after format is done