Nckia 5700+ error on imei change

[TerribleTurk]

Action: read information
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched ON !
Connecting, wait...
Phone detected, wait...
Hardware version: MT6226, E02
Hardware version: M500Z_06B_HW
Software version: E558_MY3F8PA.V23.01.
Software date: 2005.04.12
Barcode: E55809070001440
imei: 350461450914544
Finished, time used: 4 sec
Power off phone now !





Action: imei
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched ON !
Connecting, wait...
Phone detected, wait...
Hardware version: MT6226, E02
Hardware version: M500Z_06B_HW
Software version: E558_MY3F8PA.V23.01.
Software date: 2005.04.12
Barcode: E55809070001440
imei: 350461450914544
new imei: 350076870715113
imei verification failed
Operation failed !
Finished, time used: 4 sec
Power off phone now !

is it supported now or am i doing something wrong?

[InfinitySupport]

check imei by *#06#
if not changed: make eeprom backup, make format and write imei again.

[TerribleTurk]

ok thnx problem solved.and putting simcards in phones also working solution for this model.there is a model PDA MOBILE with dual sim.there are 2 mcu inside,one is mt6205 and other one 6226.i found vbat and gnd pins on phone pcb,but couldnt find the rxa rxb txa txb.tried all posibilities written on 'how to find pinouts' instructions but no way.any help about this?

br

[habeebo]

pls put here pinout i need it