View Full Version : CECT U8810 pin-outs
If everybody needs....here are the pin outs for CECT U8810
greetings GunGoa
i need pinout for zte A35 any one with it?or where can i buy this cable?thanks in advance
InfinityHelp
10-18-2007, 15:44
hello!
zte a35 pinout is available in shell.exe
akhil123
01-06-2008, 08:17
thankxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
SHOEB AHMED
01-06-2008, 10:30
If everybody needs....here are the pin outs for CECT U8810
greetings GunGoa
pinout is available in Infinity shell.EXE
singhdeep
01-24-2008, 13:52
no sir u8810 pinouts not available in shell.but thanx for gungoa.
singhdeep
01-26-2008, 11:43
this pinouts is not working.i need real pinouts sir
InfinityHelp
01-27-2008, 19:01
hello!
try again this pinout , but change with places Tx, Rx wires
or try test points on PCB:
http://forum.gsmhosting.com/vbb/showpost.php?p=3043652&postcount=2
we will release very soon new box_add_on which will find pinout automaticly.
will try to keep it costs for existing users as minimum as possible
singhdeep
01-29-2008, 09:01
thanx sit its work ok.
you cannot use the testpoint on PCB......there are some resistors behind the testpoints.
So you have to the connector or the resistors behind
InfinityHelp
02-14-2008, 13:30
hello!
what is resistors value?
Hello,
The value for the resistors is 100 ohm
best regards
Gungoa
P.S. these pinouts really work
InfinityHelp
02-17-2008, 20:25
hello!
actually 100ohm resistors should not resist signals...
I tried both ways. But the testpoints on the board doesnt work with infinity.Only the way over the connector works correctly.All the rest is crap!!!!
You can believe it....
InfinityHelp
02-28-2008, 18:03
Hello!
ok, i belive you. I hope this tread will be helpful to other users looking for pinout problem solution on this handset