PDA

View Full Version : Panasonic A100 hv problem to UNLOCK - URGENT

khem
10-25-2007, 16:21
COM1 selected
Device: Panasonic A100,A101,A102
Checking data, wait...
Action: Unlock
Boot...
Press and HOLD Power button !
Err: wrong answer, error#01
Boot Fail
Finished
Remove/Install battery now !
Time used: 74 sec

any1 unlocked this before??
phone shud be off before asking "Press and HOLD Power button !"??
my cable is G5O (B)
wat is the problem plz??

Thnx

BR
khemal
InfinityHelp
10-25-2007, 18:21
hello!

are you sure you set right com port? com1?
are you using own cable, not via box rj45?
khem
10-25-2007, 20:46
hello!

are you sure you set right com port? com1?
are you using own cable, not via box rj45?

hello!

Thx for ur reply
im using infinity cable G50 {label "AT106 G50 (B)} via BOX RJ45
Yeah COM PORT is 1, i just unlock a moto c113a...
but still can`t get connection wiz my panasonic A100..

Wat is the procedure plz??
or maybe a problem wiz phone itself..
khem
10-25-2007, 21:06
http://xs320.xs.to/xs320/07434/2410b2007.jpg
InfinityHelp
10-25-2007, 21:44
hello!

yes, now i see com port selected correctly. then only one reason can be:
you must cut rubber arround connector.
please run shell.exe, select model A100, you will see pinout for this phone
click on Picture2, Picture3. you will see how to modify phone connector to make it fit in properly
Red Sun
10-26-2007, 06:03
i also face same problem with u brother!!!!!!!!!!!!!!!!! always getting error boot!!!! i also need get the answaer!!!!!! thanks!!!!!!!!!!!!!!
InfinityHelp
10-26-2007, 13:10
hello Red Sun!

please run shell.exe, select model A100, you will see pinout for this phone
click on Picture2, Picture3. you will see how to modify phone connector to make it fit in properly
khem
10-26-2007, 18:58
Thnx infinity support
i unlock it ;)

i modified the cable as u said
i used G50 cable on rj45 / mbus / com6
phone is done, Thnx infinity Team ;))))

BR
khemal
Red Sun
10-28-2007, 14:06
oic..that is cable problem!!!!!!!!yes i will do it later!! thanks
ivanunki
06-17-2008, 18:41
UNLOCK SUCESS A102
CABLE: PAN G50

COM9 [VCP1] selected
Device: Panasonic-A100,A101,A102
Checking data, wait...
Action: Unlock
Boot...
Press and HOLD Power button !
Connecting, wait...
Release Power button !
flash: 01227E220A2201:80E59F00000000
flash: Amd PL032J D 4Mb
id: 00005250
Boot Done
Set baud...
115200
Set baud Done
Check Flash...
Check Flash Done
Check space...
file saved: C:\Archivos de programa\InfinityBox\QModule\backup_eeprom_unlock-1_20080617-113957.03E.bin
Check space Done
Check parameters...
Check parameters Done
Format file system...
area-01...
area requested/selected: 02/03
Format file system Done
Write...
Preparing...
area requested/selected: 02/03
Write Done
Finished
Remove/Install battery now !
Time used: 31 sec