Hutch USHA-LEXUS UL2104 UNLOCK?

[anil2006]

Hutch
USHA-LEXUS UL2104
IMEI:352648010119758
COM23 selected
Device: Hutch Usha-Laxus
Checking data, wait...
advanced flash detection active
Action: unlock
Warning ! After unlock process finished make this:
1. be sure that there is NO any SIM card in phone
2. press phone "Power" button and power-On phone
3. press phone "Power" button and power-Off phone
4. NOTE ! SIM card can be blocked during first power-On so use SIM card
that you ready to move to trash w/o problems !
5. now you can power-On phone with SIM card
Do you understand instruction and want to continue ?
unlock method: standard
Boot...
Press and HOLD Power button now !
Connecting, wait...
Initializing[6205:8B00]...
boot step size: 0400
Release Power button now !
Boot Done
Initialize...
detecting chip #00 in region #00...
flash: DA2213DD00DD02:18E59F00000000
flash: DA2213DD00DD02:18E59F00000000
flash: Winbond T 4Mb
number of flash chip/regions detected: 01/01
Initialize Done
Set baud...
115200
Set baud Done
Identification...
detect device identification, method #1...
detection phase #1...
.
detection phase #2...
.......
detect device parameters finished
protocol ver: 02
ver. sw1: FW01_PCB01_GSM_MT6205B_DN.1_06.BIN
ver. sw2: 1.06
ffs offset/size: 00300000/000F0000
reading [eeprom[FW01_PCB01_GSM_MT6205B_DN.1_06.BIN]]...
file saved: backup_eeprom[FW01_PCB01_GSM_MT6205B_DN.1_06.BIN]_20071026-175441.B0E.bin
flash: DA2213DD00DD02:18E59F00000000
flash: DA2213DD00DD02:18E59F00000000
Identification Done
Manipulation...
detection procedure, wait...
error: phone is not locked or unknown eeprom
detection procedure, wait...
error: phone is not locked or unknown eeprom
Manipulation Fail
Finished, time used: 84 sec
Remove/Install battery now !

[nonu_don]

what message do you read when you insert a locked sim?
contact me on yahoo : gsm_device

[InfinitySupport]

@anil2006
download latest MModule from support area and try to use "smart fast" unlock method.
pls, tell me about results and post log here

[anil2006]

COM23 selected
Device: Hutch Usha-Laxus
Checking data, wait...
advanced flash detection active
Action: unlock
Warning ! After unlock process finished make this:
1. be sure that there is NO any SIM card in phone
2. press phone "Power" button and power-On phone
3. press phone "Power" button and power-Off phone
4. NOTE ! SIM card can be blocked during first power-On so use SIM card
that you ready to move to trash w/o problems !
5. now you can power-On phone with SIM card
Do you understand instruction and want to continue ?
unlock method: standard fast
Unlock procedure can be faster if you skip eeprom area backup procedure.
Do you want to disable eeprom backup ?
eeprom backup disabled
Boot...
Press and HOLD Power button now !
Connecting, wait...
Initializing[6205:8B00]...
boot step size: 0400
Release Power button now !
Boot Done
Initialize...
detecting chip #00 in region #00...
flash: DA2213DD00DD02:18E59F00000000
flash: DA2213DD00DD02:18E59F00000000
flash: Winbond T 4Mb
number of flash chip/regions detected: 01/01
Initialize Done
Set baud...
115200
Set baud Done
Identification...
detect device identification, method #1...
detection phase #1...
.
detection phase #2...
.......
detect device parameters finished
protocol ver: 02
ver. sw1: FW01_PCB01_GSM_MT6205B_DN.1_06.BIN
ver. sw2: 1.06
ffs offset/size: 00300000/000F0000
flash: DA2213DD00DD02:18E59F00000000
flash: DA2213DD00DD02:18E59F00000000
Identification Done
Manipulation...
..............
..............
error: required unlock parameters not found, check model selection
.......
lock area found
Manipulation Done
Finalization...
................
Finalization Done
Write...
flash: DA2213DD00DD02:18E59F00000000
flash: DA2213DD00DD02:18E59F00000000
flash: DA2213DD00DD02:18E59F00000000
flash: DA2213DD00DD02:18E59F00000000
Write: lock-area-2
Write Done
Finished, time used: 39 sec
Remove/Install battery now !

[InfinitySupport]

@anil2006
I repeat:
download latest MModule from support area and try to use "smart fast" unlock method.
pls, tell me about results and post log here

[anil2006]

with MModule 1.65 and smart fast unlock method

COM23 selected
Phone should be Switched OFF !
Press and HOLD Power button now !
19200
Initializing[6205:8B00]...
Connecting, wait...
error: can't finalize test moide
Operation failed !
Finished, time used: 20 sec
Remove/Install battery now !

[InfinitySupport]

Try to hold phone 'Powewr" button long time during boot procedure.
If still no luck: read flash from this phone and send to InfinityHelp@yahoo.com.hk
also include in your mail explanation what is this file and why you have sent it !

[hackwake]

Trying To Unlock Hutch Usha-Lexus Phone With MModule 1.66 And Smart Fast Unlock Method.


COM2 selected
Phone should be Switched OFF !
Press and HOLD Power button now !
19200
Initializing[6205:8B00]...
Connecting, wait...
error: can't finalize test moide
Operation failed !
Finished, time used: 20 sec
Remove/Install battery now !



I Have Taken Flash Backup And Had Send The Bin File To Above Specified Email.

[InfinitySupport]

Did you tried to press and hold phone "Power" button long time during boot procedure ? You must hold power button long time !

[hackwake]

Yes I Tried It.

When I Press & Hold The Power Button It Quicky Gives The Above Error.

[sallupat]

i have also same problem with this
i use all SP unlocking methods & also use format FFS but always show "wrong SIM"
unable to unlock with "standard fast" method
only show process with"standard" unlock method.
Thanks
salim

[InfinitySupport]

@sallupat
Please, read flash from this phone and send to InfinityHelp@yahoo.com.hk with comments what is this file.
Also pls attach "operation.log" file in your mail.

After you have made flash backup you can try to flash phone with firmware from support area and repeat unlock process.

[sallupat]

still same problem (wrong SIM), i send u file with log
salim

[InfinitySupport]

"still same problem" after flashing with file from support area ???

If so you must read instruction very carefully: http://67.15.194.130/vbb/showpost.php?p=2822102&postcount=1

[InfinitySupport]

still same problem (wrong SIM), i send u file with log
salim


It was very bad joke to send me file from support area instead of real
backup file from your phone.

Please, don't ask me about help with this phone any more !

[sallupat]

its very strange that u wrote same words in reply to me & also u put your commnets on this forum also.
i told that is any mistake do not made by any of this member in his life???
I m also member since last three years with nearly 600 posts & i also know that there is always serious matter discussed on forum
salim

[akhil_bbsr]

Dear@ Sallu Reflash It And Write Eeprom/ffs And Unlock It

[InfinitySupport]

Hello,

it's very strange that phone can't be unlocked.

What to do in case of problems:
1. flash phone with firmware from support area
2. write original eeprom into phone (if you have it)
3. make sp-unlock in "standard" mode (and follow special instruction exactly) !
4. if still no luck (that near impossible) make "format ffs" in complete mode
5. power-on phone
6. power-off phone
7. make sp-unlock in "standard" mode (and follow special instruction exactly) !

[anil2006]

COM2 selectedDevice: Hutch Usha-LaxusChecking data, wait...advanced flash detection enabledeeprom backup enabled, it may takes several minutes !Action: write NOR flash"smart write" active"format ffs" activeskip: Firmwareskip: Customization/Language Packskip: Customizationwrite: Eeprom/ffsBoot...Press and HOLD Power button now !19200Connecting, wait...Initializing[6205:8B00]...CPU: MT6205boot step size: 0400Release Power button now !Boot DoneInitialize...detecting chip #00 in region #00...flash: DA2213DD00DD02:18E59F00000000flash: DA2213DD00DD02:18E59F00000000flash: Winbond T 4Mbnumber of flash chip/regions detected: 01/01Initialize DoneSet baud...921600Set baud DoneIdentification...detect device identification#1...detection phase #1....detection phase #2..........detect device identification#1 finishedidentification#1 protocol ver: 02ver. sw1: FW01_PCB01_GSM_MT6205B_DN.1_06.BINver. sw2: 1.06, 00000000ffs offset/size: 00300000/000F0000detect device identification#2...detection phase #1....warning: optional information not founddetect device identification#2 finishedreading [eeprom[FW01_PCB01_GSM_MT6205B_DN.1_06.BIN]]...file saved: E:\Program Files\InfinityBox\MModule\backup_eeprom[FW01_PCB01_GSM_MT6205B_DN.1_06.BIN]_20080229-110646.B0E.binIdentification DoneManipulation...Manipulation DoneFinalization...Finalization DoneWrite...Area: Eeprom/ffsflash: DA2213DD00DD02:18E59F00000000flash: DA2213DD00DD02:18E59F00000000Write: Eeprom/ffsdetect device identification#2...detection phase #1....warning: optional information not founddetect device identification#2 finishedformatting...flash: DA2213DD00DD02:18E59F00000000flash: DA2213DD00DD02:18E59F00000000Write DoneFinished, time used: 62 secRemove/Install battery now !

[anil2006]

COM2 selectedDevice: Hutch Usha-LaxusChecking data, wait...advanced flash detection enabledeeprom backup enabled, it may takes several minutes !Action: unlockWarning ! After unlock process finished make this:1. be sure that there is NO any SIM card in phone2. press phone "Power" button and power-On phone3. press phone "Power" button and power-Off phone4. NOTE ! SIM card can be blocked during first power-On so use SIM cardthat you ready to move to trash w/o problems !5. now you can power-On phone with SIM cardDo you understand instruction and want to continue ?unlock method: standardBoot...Press and HOLD Power button now !19200Connecting, wait...Initializing[6205:8B00]...CPU: MT6205boot step size: 0400Release Power button now !Boot DoneInitialize...detecting chip #00 in region #00...flash: DA2213DD00DD02:18E59F00000000flash: DA2213DD00DD02:18E59F00000000flash: Winbond T 4Mbnumber of flash chip/regions detected: 01/01Initialize DoneSet baud...921600Set baud DoneIdentification...detect device identification#1...detection phase #1....detection phase #2..........detect device identification#1 finishedidentification#1 protocol ver: 02ver. sw1: FW01_PCB01_GSM_MT6205B_DN.1_06.BINver. sw2: 1.06, 00000000ffs offset/size: 00300000/000F0000detect device identification#2...detection phase #1....warning: optional information not founddetect device identification#2 finishedreading [eeprom[FW01_PCB01_GSM_MT6205B_DN.1_06.BIN]]...file saved: E:\Program Files\InfinityBox\MModule\backup_eeprom[FW01_PCB01_GSM_MT6205B_DN.1_06.BIN]_20080229-110223.B0E.binflash: DA2213DD00DD02:18E59F00000000flash: DA2213DD00DD02:18E59F00000000Identification DoneManipulation...detection procedure, wait...error: phone is not locked or unknown eepromdetection procedure, wait...error: phone is not locked or unknown eepromManipulation FailFinished, time used: 49 secRemove/Install battery now !

[anil2006]

COM2 selectedAction: reset settingsModel: Hutch Usha-LaxusChecking data, wait...Phone should be Switched OFF !Press and HOLD Power button now !19200 autodetectInitializing[6205:8B00]...CPU: MT6205Connecting, wait...error: can't finalize test moderepeat operation and HOLD phone "Power" button long time !error: operation failed !Finished, time used: 124 secRemove/Install battery now !

[anil2006]

aftar flash pro?COM2 selectedDevice: Hutch Usha-LaxusChecking data, wait...advanced flash detection enabledeeprom backup enabled, it may takes several minutes !Action: write NOR flash"smart write" active"format ffs" activewrite: Firmwareskip: Customization/Language Packskip: Customizationwrite: Eeprom/ffsBoot...Press and HOLD Power button now !19200Connecting, wait...Initializing[6205:8B00]...CPU: MT6205boot step size: 0400Release Power button now !Boot DoneInitialize...detecting chip #00 in region #00...flash: DA2213DD00DD02:18E59F00000000flash: DA2213DD00DD02:18E59F00000000flash: Winbond T 4Mbnumber of flash chip/regions detected: 01/01Initialize DoneSet baud...921600Set baud DoneIdentification...detect device identification#1...detection phase #1....detection phase #2..........detect device identification#1 finishedidentification#1 protocol ver: 02ver. sw1: FW01_PCB01_GSM_MT6205B_DN.1_06.BINver. sw2: 1.06, 00000000ffs offset/size: 00300000/000F0000detect device identification#2...detection phase #1....warning: optional information not founddetect device identification#2 finishedreading [eeprom[FW01_PCB01_GSM_MT6205B_DN.1_06.BIN]]...file saved: E:\Program Files\InfinityBox\MModule\backup_eeprom[FW01_PCB01_GSM_MT6205B_DN.1_06.BIN]_20080229-114832.B0E.binIdentification DoneManipulation...Manipulation DoneFinalization...Finalization DoneWrite...Area: Firmwareerror: no any expected answererror: no any expected answer: wrong answer after chip id requesterror: no any expected answererror: no any expected answererror: no any expected answer: wrong answer after chip cfi requesterror: no any expected answererror: no any expected answer: wrong answer after chip id requestdetect device identification#2...detection phase #1...error: unexpected termination/freez: 00000000warning: optional information not founddetect device identification#2 finishedWrite FailFinished, time used: 63 secRemove/Install battery now !

[InfinitySupport]

Hello,

Please, follow this more detailed instruction exactly like described.
It's very important to make all steps !
Please, post all results in one messagem, no need to write each step results in separate message.

What to do in case of problems:
1. Charge phone battery completely (use extrnal power supply)
2. flash phone with firmware from support area
3. write original eeprom into phone (if you have it)
4. make sp-unlock in "standard" mode and follow special instruction (given by software) exactly !
5. if still no luck (that near impossible) make "format ffs" in complete mode
6. power-on phone
7. power-off phone b phone "Power" button, don't remove battery !
8. make sp-unlock in "standard" mode (and follow special instruction exactly) !

[Chandreshswami]

Hello,

Please, follow this more detailed instruction exactly like described.
It's very important to make all steps !
Please, post all results in one messagem, no need to write each step results in separate message.

What to do in case of problems:
1. Charge phone battery completely (use extrnal power supply)
2. flash phone with firmware from support area
3. write original eeprom into phone (if you have it)
4. make sp-unlock in "standard" mode and follow special instruction (given by software) exactly !
5. if still no luck (that near impossible) make "format ffs" in complete mode
6. power-on phone
7. power-off phone b phone "Power" button, don't remove battery !
8. make sp-unlock in "standard" mode (and follow special instruction exactly) !


i also can not unlock usha lexus with infinity
tried all possible options not work for me

check attached log file

ALSO WAITING FOR SPICE S525

THANKS

Chandresh

[InfinitySupport]

Hello,

What is usha-lexus model name exactly ?
Please, send information from phone back label and full flash backup to support@infinity-box.biz

[Chandreshswami]

Hello,

What is usha-lexus model name exactly ?
Please, send information from phone back label and full flash backup to support@infinity-box.biz

model Name Usha Lexus UL2104

firmware is similar as on support area

[InfinitySupport]

Hello,

Please, send information from phone back label and full flash backup to support@infinity-box.biz

Also you can make this:
1. make full flash backup for emergency case
2. flash phone with firmware from support area
3. make "unlock" operation again

[Chandreshswami]

Hello,

Please, send information from phone back label and full flash backup to support@infinity-box.biz

Also you can make this:
1. make full flash backup for emergency case
2. flash phone with firmware from support area
3. make "unlock" operation again

Sir
check attached log file
i have already flash with support files and try to unlock but still unable to unlock