Ztc Zt6618 Pda Read Eprom,flash And Ask To Rpl Ok With Infinity

[sahil2000ind]

READ EEPROM

COM2 [VCP0] selected
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection active
Action: read eeprom
Boot...
Press and HOLD Power button now !
baud autodetection active
19200
Connecting, wait...
Initializing[6226:8A02:8A01]...
high speed disabled
boot step size: 0002
Release Power button now !
Boot Done
Initialize...
detecting chip #00 in region #00...
flash: EC257E25082501:29EA0000000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
number of flash chip/regions detected: 01/01
Initialize Done
Set baud...
921600
Set baud Done
Identification...
device parameters autodetection in progress..
detecting chip #00 in region #00...
flash: EC257E25082501:29EA0000000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
number of flash chip/regions detected: 01/01
total flash region size: 01000000
detect device identification, method #1...
detection phase #1...
detect device parameters finished
structure: 2nd [enhanced] (or higher) generation
identification data Ok
identification data backup saved: id.8B651E21.[T900_B_PCB01_GPRS_MT6226_S01.SSD1289_1_1.BIN_37CAD C6E].rpl
New firmware detected: T900_B_PCB01_GPRS_MT6226_S01.SSD1289_1_1.BIN
- make "Read detailed information, ask/rpl" operation
- send "backup_system_log_..." file to support
- make "Read full flash" operation
- send flash backup file(s) to support
- include in your e-mail full text from phone back label (phone name etc.)
identification detection finished
device-id: 8B651E21
protocol ver: 04
ver. sw1: T900_B_PCB01_GPRS_MT6226_S01.SSD1289_1_1.BIN
ver. sw2: T900_B.SSD1289_1.1
ffs offset/size: 00E00000/00200000
detecting eeprom area in 1 chip(s)...
flash: EC257E25082501:29EA0000000000
checking area[00000000]: 00000000-00FFFFFF...
eeprom found near: 00E00000
detecting eeprom size...
eeprom size: 00200000
eeprom chip: 00
eeprom area: 00000000:00E00000-00FFFFFF
reading [eeprom[T900_B_PCB01_GPRS_MT6226_S01.SSD1289_1_1.BIN]]...
file saved: backup_eeprom[T900_B_PCB01_GPRS_MT6226_S01.SSD1289_1_1.BIN]_20071102-201133.B0E.bin
file saved: backup_system_log_8B651E21_T900_B_PCB01_GPRS_MT622 6_S01.SSD1289_1_1.BIN_37CADC6E_20071102-201134.B0X.bin
Finished, time used: 169 sec
Remove/Install battery now !



READ FLASH

COM2 [VCP0] selected
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection active
Action: read NOR flash
Boot...
Press and HOLD Power button now !
baud autodetection active
19200
Connecting, wait...
Initializing[6226:8A02:8A01]...
high speed disabled
boot step size: 0002
Release Power button now !
Boot Done
Initialize...
detecting chip #00 in region #00...
flash: EC257E25082501:29EA0000000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
number of flash chip/regions detected: 01/01
Initialize Done
Set baud...
921600
Set baud Done
Identification...
device parameters autodetection in progress..
detecting chip #00 in region #00...
flash: EC257E25082501:29EA0000000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
number of flash chip/regions detected: 01/01
total flash region size: 01000000
detect device identification, method #1...
detection phase #1...
detect device parameters finished
structure: 2nd [enhanced] (or higher) generation
identification data Ok
identification data backup saved: id.8B651E21.[T900_B_PCB01_GPRS_MT6226_S01.SSD1289_1_1.BIN_37CAD C6E].rpl
New firmware detected: T900_B_PCB01_GPRS_MT6226_S01.SSD1289_1_1.BIN
- make "Read detailed information, ask/rpl" operation
- send "backup_system_log_..." file to support
- make "Read full flash" operation
- send flash backup file(s) to support
- include in your e-mail full text from phone back label (phone name etc.)
identification detection finished
device-id: 8B651E21
protocol ver: 04
ver. sw1: T900_B_PCB01_GPRS_MT6226_S01.SSD1289_1_1.BIN
ver. sw2: T900_B.SSD1289_1.1
ffs offset/size: 00E00000/00200000
detecting eeprom area in 1 chip(s)...
flash: EC257E25082501:29EA0000000000
checking area[00000000]: 00000000-00FFFFFF...
eeprom found near: 00E00000
detecting eeprom size...
eeprom size: 00200000
eeprom chip: 00
eeprom area: 00000000:00E00000-00FFFFFF
reading [flash[T900_B_PCB01_GPRS_MT6226_S01.SSD1289_1_1.BIN]]...
file saved: backup_flash[T900_B_PCB01_GPRS_MT6226_S01.SSD1289_1_1.BIN]_20071102-202902.B0M.bin
file saved: backup_system_log_8B651E21_T900_B_PCB01_GPRS_MT622 6_S01.SSD1289_1_1.BIN_37CADC6E_20071102-202911.B0X.bin
Finished, time used: 577 sec
Remove/Install battery now !



READ ASK

COM2 [VCP0] selected
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection active
Action: read/check detailed information
Boot...
Press and HOLD Power button now !
baud autodetection active
19200
Connecting, wait...
Initializing[6226:8A02:8A01]...
high speed disabled
boot step size: 0002
Release Power button now !
Boot Done
Initialize...
detecting chip #00 in region #00...
flash: EC257E25082501:29EA0000000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
number of flash chip/regions detected: 01/01
Initialize Done
Set baud...
921600
Set baud Done
Identification...
device parameters autodetection in progress..
detecting chip #00 in region #00...
flash: EC257E25082501:29EA0000000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
number of flash chip/regions detected: 01/01
total flash region size: 01000000
detect device identification, method #1...
detection phase #1...
detect device parameters finished
structure: 2nd [enhanced] (or higher) generation
identification data Ok
identification data backup saved: id.8B651E21.[T900_B_PCB01_GPRS_MT6226_S01.SSD1289_1_1.BIN_37CAD C6E].rpl
New firmware detected: T900_B_PCB01_GPRS_MT6226_S01.SSD1289_1_1.BIN
- make "Read detailed information, ask/rpl" operation
- send "backup_system_log_..." file to support
- make "Read full flash" operation
- send flash backup file(s) to support
- include in your e-mail full text from phone back label (phone name etc.)
identification detection finished
device-id: 8B651E21
protocol ver: 04
ver. sw1: T900_B_PCB01_GPRS_MT6226_S01.SSD1289_1_1.BIN
ver. sw2: T900_B.SSD1289_1.1
ffs offset/size: 00E00000/00200000
detecting eeprom area in 1 chip(s)...
flash: EC257E25082501:29EA0000000000
checking area[00000000]: 00000000-00FFFFFF...
eeprom found near: 00E00000
detecting eeprom size...
eeprom size: 00200000
eeprom chip: 00
eeprom area: 00000000:00E00000-00FFFFFF
detection phase #3...
.................................................. ..............
done
detecting structure pass 1...
...................
detect standard fat location pass #1...
.................................................. ......
detect extended fat location pass #1...
.................................................. .....
detect standard fat offset pass #1...
detect standard fat data...
fat layout detection complete
eeprom element #1 detected ok
file saved: backup_system_log_8B651E21_T900_B_PCB01_GPRS_MT622 6_S01.SSD1289_1_1.BIN_37CADC6E_20071102-203216.B0X.bin
Finished, time used: 125 sec
Remove/Install battery now !

THANKS INFINITY BOX

[InfinitySupport]

Thanks a lot for good test report !

Please, send 2 files to support: InfinityHelp@yahoo.com.hk
backup_flash[T900_B_PCB01_GPRS_MT6226_S01.SSD1289_1_1.BIN]_20071102-202902.B0M.bin
backup_system_log_8B651E21_T900_B_PCB01_GPRS_MT622 6_S01.SSD1289_1_1.BIN_37CADC6E_20071102-202911.B0X.bin

Thank you !

[SRNOURI]

READ EEPROM

COM2 [VCP0] selected
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection active
Action: read eeprom
Boot...
Press and HOLD Power button now !
baud autodetection active
19200
Connecting, wait...
Initializing[6226:8A02:8A01]...
high speed disabled
boot step size: 0002
Release Power button now !
Boot Done
Initialize...
detecting chip #00 in region #00...
flash: EC257E25082501:29EA0000000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
number of flash chip/regions detected: 01/01
Initialize Done
Set baud...
921600
Set baud Done
Identification...
device parameters autodetection in progress..
detecting chip #00 in region #00...
flash: EC257E25082501:29EA0000000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
number of flash chip/regions detected: 01/01
total flash region size: 01000000
detect device identification, method #1...
detection phase #1...
detect device parameters finished
structure: 2nd [enhanced] (or higher) generation
identification data Ok
identification data backup saved: id.8B651E21.[T900_B_PCB01_GPRS_MT6226_S01.SSD1289_1_1.BIN_37CAD C6E].rpl
New firmware detected: T900_B_PCB01_GPRS_MT6226_S01.SSD1289_1_1.BIN
- make "Read detailed information, ask/rpl" operation
- send "backup_system_log_..." file to support
- make "Read full flash" operation
- send flash backup file(s) to support
- include in your e-mail full text from phone back label (phone name etc.)
identification detection finished
device-id: 8B651E21
protocol ver: 04
ver. sw1: T900_B_PCB01_GPRS_MT6226_S01.SSD1289_1_1.BIN
ver. sw2: T900_B.SSD1289_1.1
ffs offset/size: 00E00000/00200000
detecting eeprom area in 1 chip(s)...
flash: EC257E25082501:29EA0000000000
checking area[00000000]: 00000000-00FFFFFF...
eeprom found near: 00E00000
detecting eeprom size...
eeprom size: 00200000
eeprom chip: 00
eeprom area: 00000000:00E00000-00FFFFFF
reading [eeprom[T900_B_PCB01_GPRS_MT6226_S01.SSD1289_1_1.BIN]]...
file saved: backup_eeprom[T900_B_PCB01_GPRS_MT6226_S01.SSD1289_1_1.BIN]_20071102-201133.B0E.bin
file saved: backup_system_log_8B651E21_T900_B_PCB01_GPRS_MT622 6_S01.SSD1289_1_1.BIN_37CADC6E_20071102-201134.B0X.bin
Finished, time used: 169 sec
Remove/Install battery now !



READ FLASH

COM2 [VCP0] selected
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection active
Action: read NOR flash
Boot...
Press and HOLD Power button now !
baud autodetection active
19200
Connecting, wait...
Initializing[6226:8A02:8A01]...
high speed disabled
boot step size: 0002
Release Power button now !
Boot Done
Initialize...
detecting chip #00 in region #00...
flash: EC257E25082501:29EA0000000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
number of flash chip/regions detected: 01/01
Initialize Done
Set baud...
921600
Set baud Done
Identification...
device parameters autodetection in progress..
detecting chip #00 in region #00...
flash: EC257E25082501:29EA0000000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
number of flash chip/regions detected: 01/01
total flash region size: 01000000
detect device identification, method #1...
detection phase #1...
detect device parameters finished
structure: 2nd [enhanced] (or higher) generation
identification data Ok
identification data backup saved: id.8B651E21.[T900_B_PCB01_GPRS_MT6226_S01.SSD1289_1_1.BIN_37CAD C6E].rpl
New firmware detected: T900_B_PCB01_GPRS_MT6226_S01.SSD1289_1_1.BIN
- make "Read detailed information, ask/rpl" operation
- send "backup_system_log_..." file to support
- make "Read full flash" operation
- send flash backup file(s) to support
- include in your e-mail full text from phone back label (phone name etc.)
identification detection finished
device-id: 8B651E21
protocol ver: 04
ver. sw1: T900_B_PCB01_GPRS_MT6226_S01.SSD1289_1_1.BIN
ver. sw2: T900_B.SSD1289_1.1
ffs offset/size: 00E00000/00200000
detecting eeprom area in 1 chip(s)...
flash: EC257E25082501:29EA0000000000
checking area[00000000]: 00000000-00FFFFFF...
eeprom found near: 00E00000
detecting eeprom size...
eeprom size: 00200000
eeprom chip: 00
eeprom area: 00000000:00E00000-00FFFFFF
reading [flash[T900_B_PCB01_GPRS_MT6226_S01.SSD1289_1_1.BIN]]...
file saved: backup_flash[T900_B_PCB01_GPRS_MT6226_S01.SSD1289_1_1.BIN]_20071102-202902.B0M.bin
file saved: backup_system_log_8B651E21_T900_B_PCB01_GPRS_MT622 6_S01.SSD1289_1_1.BIN_37CADC6E_20071102-202911.B0X.bin
Finished, time used: 577 sec
Remove/Install battery now !



READ ASK

COM2 [VCP0] selected
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection active
Action: read/check detailed information
Boot...
Press and HOLD Power button now !
baud autodetection active
19200
Connecting, wait...
Initializing[6226:8A02:8A01]...
high speed disabled
boot step size: 0002
Release Power button now !
Boot Done
Initialize...
detecting chip #00 in region #00...
flash: EC257E25082501:29EA0000000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
number of flash chip/regions detected: 01/01
Initialize Done
Set baud...
921600
Set baud Done
Identification...
device parameters autodetection in progress..
detecting chip #00 in region #00...
flash: EC257E25082501:29EA0000000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
number of flash chip/regions detected: 01/01
total flash region size: 01000000
detect device identification, method #1...
detection phase #1...
detect device parameters finished
structure: 2nd [enhanced] (or higher) generation
identification data Ok
identification data backup saved: id.8B651E21.[T900_B_PCB01_GPRS_MT6226_S01.SSD1289_1_1.BIN_37CAD C6E].rpl
New firmware detected: T900_B_PCB01_GPRS_MT6226_S01.SSD1289_1_1.BIN
- make "Read detailed information, ask/rpl" operation
- send "backup_system_log_..." file to support
- make "Read full flash" operation
- send flash backup file(s) to support
- include in your e-mail full text from phone back label (phone name etc.)
identification detection finished
device-id: 8B651E21
protocol ver: 04
ver. sw1: T900_B_PCB01_GPRS_MT6226_S01.SSD1289_1_1.BIN
ver. sw2: T900_B.SSD1289_1.1
ffs offset/size: 00E00000/00200000
detecting eeprom area in 1 chip(s)...
flash: EC257E25082501:29EA0000000000
checking area[00000000]: 00000000-00FFFFFF...
eeprom found near: 00E00000
detecting eeprom size...
eeprom size: 00200000
eeprom chip: 00
eeprom area: 00000000:00E00000-00FFFFFF
detection phase #3...
.................................................. ..............
done
detecting structure pass 1...
...................
detect standard fat location pass #1...
.................................................. ......
detect extended fat location pass #1...
.................................................. .....
detect standard fat offset pass #1...
detect standard fat data...
fat layout detection complete
eeprom element #1 detected ok
file saved: backup_system_log_8B651E21_T900_B_PCB01_GPRS_MT622 6_S01.SSD1289_1_1.BIN_37CADC6E_20071102-203216.B0X.bin
Finished, time used: 125 sec
Remove/Install battery now !

THANKS INFINITY BOX


Dear friend,
Can you post the pinout of your tested phone.Have it 18 pin connector???:confused: