Anycool D66+ After Flash Become Dead

[ashok_kumar459]

Anycool D66+ After Flash Become Dead The Complaint Was When Insert Sim The Phone Was Shutdown Formatted With Complete Mode Remain Same Problem. I Flashed Same File From Infinity Now Become Dead Need Solution Please If Anyone Know? This Pinout Is 18pin 1,2 Gnd 7 Tx 9 Rx

Need Urgengtly Please.................................

[InfinitySupport]

you must make ask/rpl calculation
http://www.gsmhosting.com/vbb/showthread.php?t=452251

[ashok_kumar459]

now readed ask/rpl and standard eprom written now power is but white light startup tone hearing

[InfinitySupport]

How to repair "White LCD", "Black LCD", "no LCD" problems:

1. check phone hardware: LCD unit may be damaged.
2. check phone hardware: LCD flex cable may be damaged.
3. use other flash files for flashing, because exist
many different phones with different LCD hardware types so
need to use different firmware files and find firmware that
work good for your LCD hardware.

[ashok_kumar459]

hi, my problem was solved whitelight before flashing this d66+ amycool display was ok only insert sim phones goes off formatted remain same problem so flashed with same file from the site now white light phone is on same complaint earlier it was.

now what i did is same model new phones read full flash file and restored. now disply is ok shutproblem not solving. i think its hardware problem. don't know which parts to repaired...........................